| menu "Platform support" |
| depends on PPC_8xx |
| |
| config FADS |
| bool |
| |
| config CPM1 |
| bool |
| |
| choice |
| prompt "8xx Machine Type" |
| depends on 8xx |
| default MPC885ADS |
| |
| config MPC8XXFADS |
| bool "FADS" |
| select FADS |
| |
| config MPC86XADS |
| bool "MPC86XADS" |
| select CPM1 |
| help |
| MPC86x Application Development System by Freescale Semiconductor. |
| The MPC86xADS is meant to serve as a platform for s/w and h/w |
| development around the MPC86X processor families. |
| |
| config MPC885ADS |
| bool "MPC885ADS" |
| select CPM1 |
| help |
| Freescale Semiconductor MPC885 Application Development System (ADS). |
| Also known as DUET. |
| The MPC885ADS is meant to serve as a platform for s/w and h/w |
| development around the MPC885 processor family. |
| |
| endchoice |
| |
| menu "Freescale Ethernet driver platform-specific options" |
| depends on (FS_ENET && MPC885ADS) |
| |
| config MPC8xx_SECOND_ETH |
| bool "Second Ethernet channel" |
| depends on MPC885ADS |
| default y |
| help |
| This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. |
| The latter will use SCC1, for 885ADS you can select it below. |
| |
| choice |
| prompt "Second Ethernet channel" |
| depends on MPC8xx_SECOND_ETH |
| default MPC8xx_SECOND_ETH_FEC2 |
| |
| config MPC8xx_SECOND_ETH_FEC2 |
| bool "FEC2" |
| depends on MPC885ADS |
| help |
| Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 |
| (often 2-nd UART) will not work if this is enabled. |
| |
| config MPC8xx_SECOND_ETH_SCC3 |
| bool "SCC3" |
| depends on MPC885ADS |
| help |
| Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 |
| (often 1-nd UART) will not work if this is enabled. |
| |
| endchoice |
| |
| endmenu |
| |
| endmenu |
| |
| # |
| # MPC8xx Communication options |
| # |
| |
| menu "MPC8xx CPM Options" |
| depends on 8xx |
| |
| # This doesn't really belong here, but it is convenient to ask |
| # 8xx specific questions. |
| comment "Generic MPC8xx Options" |
| |
| config 8xx_COPYBACK |
| bool "Copy-Back Data Cache (else Writethrough)" |
| help |
| Saying Y here will cause the cache on an MPC8xx processor to be used |
| in Copy-Back mode. If you say N here, it is used in Writethrough |
| mode. |
| |
| If in doubt, say Y here. |
| |
| config 8xx_CPU6 |
| bool "CPU6 Silicon Errata (860 Pre Rev. C)" |
| help |
| MPC860 CPUs, prior to Rev C have some bugs in the silicon, which |
| require workarounds for Linux (and most other OSes to work). If you |
| get a BUG() very early in boot, this might fix the problem. For |
| more details read the document entitled "MPC860 Family Device Errata |
| Reference" on Motorola's website. This option also incurs a |
| performance hit. |
| |
| If in doubt, say N here. |
| |
| choice |
| prompt "Microcode patch selection" |
| default NO_UCODE_PATCH |
| help |
| Help not implemented yet, coming soon. |
| |
| config NO_UCODE_PATCH |
| bool "None" |
| |
| config USB_SOF_UCODE_PATCH |
| bool "USB SOF patch" |
| help |
| Help not implemented yet, coming soon. |
| |
| config I2C_SPI_UCODE_PATCH |
| bool "I2C/SPI relocation patch" |
| help |
| Help not implemented yet, coming soon. |
| |
| config I2C_SPI_SMC1_UCODE_PATCH |
| bool "I2C/SPI/SMC1 relocation patch" |
| help |
| Help not implemented yet, coming soon. |
| |
| endchoice |
| |
| config UCODE_PATCH |
| bool |
| default y |
| depends on !NO_UCODE_PATCH |
| |
| endmenu |
| |
