| /* |
| * AMD K7 Powernow driver. |
| * (C) 2003 Dave Jones on behalf of SuSE Labs. |
| * (C) 2003-2004 Dave Jones <davej@redhat.com> |
| * |
| * Licensed under the terms of the GNU GPL License version 2. |
| * Based upon datasheets & sample CPUs kindly provided by AMD. |
| * |
| * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. |
| * - We cli/sti on stepping A0 CPUs around the FID/VID transition. |
| * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. |
| * - We disable half multipliers if ACPI is used on A0 stepping CPUs. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/dmi.h> |
| |
| #include <asm/msr.h> |
| #include <asm/timer.h> |
| #include <asm/timex.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| |
| #ifdef CONFIG_X86_POWERNOW_K7_ACPI |
| #include <linux/acpi.h> |
| #include <acpi/processor.h> |
| #endif |
| |
| #include "powernow-k7.h" |
| |
| #define PFX "powernow: " |
| |
| |
| struct psb_s { |
| u8 signature[10]; |
| u8 tableversion; |
| u8 flags; |
| u16 settlingtime; |
| u8 reserved1; |
| u8 numpst; |
| }; |
| |
| struct pst_s { |
| u32 cpuid; |
| u8 fsbspeed; |
| u8 maxfid; |
| u8 startvid; |
| u8 numpstates; |
| }; |
| |
| #ifdef CONFIG_X86_POWERNOW_K7_ACPI |
| union powernow_acpi_control_t { |
| struct { |
| unsigned long fid:5, |
| vid:5, |
| sgtc:20, |
| res1:2; |
| } bits; |
| unsigned long val; |
| }; |
| #endif |
| |
| #ifdef CONFIG_CPU_FREQ_DEBUG |
| /* divide by 1000 to get VCore voltage in V. */ |
| static const int mobile_vid_table[32] = { |
| 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, |
| 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, |
| 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, |
| 1075, 1050, 1025, 1000, 975, 950, 925, 0, |
| }; |
| #endif |
| |
| /* divide by 10 to get FID. */ |
| static const int fid_codes[32] = { |
| 110, 115, 120, 125, 50, 55, 60, 65, |
| 70, 75, 80, 85, 90, 95, 100, 105, |
| 30, 190, 40, 200, 130, 135, 140, 210, |
| 150, 225, 160, 165, 170, 180, -1, -1, |
| }; |
| |
| /* This parameter is used in order to force ACPI instead of legacy method for |
| * configuration purpose. |
| */ |
| |
| static int acpi_force; |
| |
| static struct cpufreq_frequency_table *powernow_table; |
| |
| static unsigned int can_scale_bus; |
| static unsigned int can_scale_vid; |
| static unsigned int minimum_speed=-1; |
| static unsigned int maximum_speed; |
| static unsigned int number_scales; |
| static unsigned int fsb; |
| static unsigned int latency; |
| static char have_a0; |
| |
| #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) |
| |
| static int check_fsb(unsigned int fsbspeed) |
| { |
| int delta; |
| unsigned int f = fsb / 1000; |
| |
| delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; |
| return (delta < 5); |
| } |
| |
| static int check_powernow(void) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(0); |
| unsigned int maxei, eax, ebx, ecx, edx; |
| |
| if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { |
| #ifdef MODULE |
| printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); |
| #endif |
| return 0; |
| } |
| |
| /* Get maximum capabilities */ |
| maxei = cpuid_eax (0x80000000); |
| if (maxei < 0x80000007) { /* Any powernow info ? */ |
| #ifdef MODULE |
| printk (KERN_INFO PFX "No powernow capabilities detected\n"); |
| #endif |
| return 0; |
| } |
| |
| if ((c->x86_model == 6) && (c->x86_mask == 0)) { |
| printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); |
| have_a0 = 1; |
| } |
| |
| cpuid(0x80000007, &eax, &ebx, &ecx, &edx); |
| |
| /* Check we can actually do something before we say anything.*/ |
| if (!(edx & (1 << 1 | 1 << 2))) |
| return 0; |
| |
| printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); |
| |
| if (edx & 1 << 1) { |
| printk ("frequency"); |
| can_scale_bus=1; |
| } |
| |
| if ((edx & (1 << 1 | 1 << 2)) == 0x6) |
| printk (" and "); |
| |
| if (edx & 1 << 2) { |
| printk ("voltage"); |
| can_scale_vid=1; |
| } |
| |
| printk (".\n"); |
| return 1; |
| } |
| |
| |
| static int get_ranges (unsigned char *pst) |
| { |
| unsigned int j; |
| unsigned int speed; |
| u8 fid, vid; |
| |
| powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); |
| if (!powernow_table) |
| return -ENOMEM; |
| |
| for (j=0 ; j < number_scales; j++) { |
| fid = *pst++; |
| |
| powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; |
| powernow_table[j].index = fid; /* lower 8 bits */ |
| |
| speed = powernow_table[j].frequency; |
| |
| if ((fid_codes[fid] % 10)==5) { |
| #ifdef CONFIG_X86_POWERNOW_K7_ACPI |
| if (have_a0 == 1) |
| powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; |
| #endif |
| } |
| |
| if (speed < minimum_speed) |
| minimum_speed = speed; |
| if (speed > maximum_speed) |
| maximum_speed = speed; |
| |
| vid = *pst++; |
| powernow_table[j].index |= (vid << 8); /* upper 8 bits */ |
| |
| dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " |
| "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, |
| fid_codes[fid] % 10, speed/1000, vid, |
| mobile_vid_table[vid]/1000, |
| mobile_vid_table[vid]%1000); |
| } |
| powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; |
| powernow_table[number_scales].index = 0; |
| |
| return 0; |
| } |
| |
| |
| static void change_FID(int fid) |
| { |
| union msr_fidvidctl fidvidctl; |
| |
| rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); |
| if (fidvidctl.bits.FID != fid) { |
| fidvidctl.bits.SGTC = latency; |
| fidvidctl.bits.FID = fid; |
| fidvidctl.bits.VIDC = 0; |
| fidvidctl.bits.FIDC = 1; |
| wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); |
| } |
| } |
| |
| |
| static void change_VID(int vid) |
| { |
| union msr_fidvidctl fidvidctl; |
| |
| rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); |
| if (fidvidctl.bits.VID != vid) { |
| fidvidctl.bits.SGTC = latency; |
| fidvidctl.bits.VID = vid; |
| fidvidctl.bits.FIDC = 0; |
| fidvidctl.bits.VIDC = 1; |
| wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); |
| } |
| } |
| |
| |
| static void change_speed (unsigned int index) |
| { |
| u8 fid, vid; |
| struct cpufreq_freqs freqs; |
| union msr_fidvidstatus fidvidstatus; |
| int cfid; |
| |
| /* fid are the lower 8 bits of the index we stored into |
| * the cpufreq frequency table in powernow_decode_bios, |
| * vid are the upper 8 bits. |
| */ |
| |
| fid = powernow_table[index].index & 0xFF; |
| vid = (powernow_table[index].index & 0xFF00) >> 8; |
| |
| freqs.cpu = 0; |
| |
| rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); |
| cfid = fidvidstatus.bits.CFID; |
| freqs.old = fsb * fid_codes[cfid] / 10; |
| |
| freqs.new = powernow_table[index].frequency; |
| |
| cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); |
| |
| /* Now do the magic poking into the MSRs. */ |
| |
| if (have_a0 == 1) /* A0 errata 5 */ |
| local_irq_disable(); |
| |
| if (freqs.old > freqs.new) { |
| /* Going down, so change FID first */ |
| change_FID(fid); |
| change_VID(vid); |
| } else { |
| /* Going up, so change VID first */ |
| change_VID(vid); |
| change_FID(fid); |
| } |
| |
| |
| if (have_a0 == 1) |
| local_irq_enable(); |
| |
| cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); |
| } |
| |
| |
| #ifdef CONFIG_X86_POWERNOW_K7_ACPI |
| |
| static struct acpi_processor_performance *acpi_processor_perf; |
| |
| static int powernow_acpi_init(void) |
| { |
| int i; |
| int retval = 0; |
| union powernow_acpi_control_t pc; |
| |
| if (acpi_processor_perf != NULL && powernow_table != NULL) { |
| retval = -EINVAL; |
| goto err0; |
| } |
| |
| acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), |
| GFP_KERNEL); |
| if (!acpi_processor_perf) { |
| retval = -ENOMEM; |
| goto err0; |
| } |
| |
| if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, |
| GFP_KERNEL)) { |
| retval = -ENOMEM; |
| goto err05; |
| } |
| |
| if (acpi_processor_register_performance(acpi_processor_perf, 0)) { |
| retval = -EIO; |
| goto err1; |
| } |
| |
| if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { |
| retval = -ENODEV; |
| goto err2; |
| } |
| |
| if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { |
| retval = -ENODEV; |
| goto err2; |
| } |
| |
| number_scales = acpi_processor_perf->state_count; |
| |
| if (number_scales < 2) { |
| retval = -ENODEV; |
| goto err2; |
| } |
| |
| powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); |
| if (!powernow_table) { |
| retval = -ENOMEM; |
| goto err2; |
| } |
| |
| pc.val = (unsigned long) acpi_processor_perf->states[0].control; |
| for (i = 0; i < number_scales; i++) { |
| u8 fid, vid; |
| struct acpi_processor_px *state = |
| &acpi_processor_perf->states[i]; |
| unsigned int speed, speed_mhz; |
| |
| pc.val = (unsigned long) state->control; |
| dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", |
| i, |
| (u32) state->core_frequency, |
| (u32) state->power, |
| (u32) state->transition_latency, |
| (u32) state->control, |
| pc.bits.sgtc); |
| |
| vid = pc.bits.vid; |
| fid = pc.bits.fid; |
| |
| powernow_table[i].frequency = fsb * fid_codes[fid] / 10; |
| powernow_table[i].index = fid; /* lower 8 bits */ |
| powernow_table[i].index |= (vid << 8); /* upper 8 bits */ |
| |
| speed = powernow_table[i].frequency; |
| speed_mhz = speed / 1000; |
| |
| /* processor_perflib will multiply the MHz value by 1000 to |
| * get a KHz value (e.g. 1266000). However, powernow-k7 works |
| * with true KHz values (e.g. 1266768). To ensure that all |
| * powernow frequencies are available, we must ensure that |
| * ACPI doesn't restrict them, so we round up the MHz value |
| * to ensure that perflib's computed KHz value is greater than |
| * or equal to powernow's KHz value. |
| */ |
| if (speed % 1000 > 0) |
| speed_mhz++; |
| |
| if ((fid_codes[fid] % 10)==5) { |
| if (have_a0 == 1) |
| powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; |
| } |
| |
| dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " |
| "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, |
| fid_codes[fid] % 10, speed_mhz, vid, |
| mobile_vid_table[vid]/1000, |
| mobile_vid_table[vid]%1000); |
| |
| if (state->core_frequency != speed_mhz) { |
| state->core_frequency = speed_mhz; |
| dprintk(" Corrected ACPI frequency to %d\n", |
| speed_mhz); |
| } |
| |
| if (latency < pc.bits.sgtc) |
| latency = pc.bits.sgtc; |
| |
| if (speed < minimum_speed) |
| minimum_speed = speed; |
| if (speed > maximum_speed) |
| maximum_speed = speed; |
| } |
| |
| powernow_table[i].frequency = CPUFREQ_TABLE_END; |
| powernow_table[i].index = 0; |
| |
| /* notify BIOS that we exist */ |
| acpi_processor_notify_smm(THIS_MODULE); |
| |
| return 0; |
| |
| err2: |
| acpi_processor_unregister_performance(acpi_processor_perf, 0); |
| err1: |
| free_cpumask_var(acpi_processor_perf->shared_cpu_map); |
| err05: |
| kfree(acpi_processor_perf); |
| err0: |
| printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); |
| acpi_processor_perf = NULL; |
| return retval; |
| } |
| #else |
| static int powernow_acpi_init(void) |
| { |
| printk(KERN_INFO PFX "no support for ACPI processor found." |
| " Please recompile your kernel with ACPI processor\n"); |
| return -EINVAL; |
| } |
| #endif |
| |
| static int powernow_decode_bios (int maxfid, int startvid) |
| { |
| struct psb_s *psb; |
| struct pst_s *pst; |
| unsigned int i, j; |
| unsigned char *p; |
| unsigned int etuple; |
| unsigned int ret; |
| |
| etuple = cpuid_eax(0x80000001); |
| |
| for (i=0xC0000; i < 0xffff0 ; i+=16) { |
| |
| p = phys_to_virt(i); |
| |
| if (memcmp(p, "AMDK7PNOW!", 10) == 0){ |
| dprintk ("Found PSB header at %p\n", p); |
| psb = (struct psb_s *) p; |
| dprintk ("Table version: 0x%x\n", psb->tableversion); |
| if (psb->tableversion != 0x12) { |
| printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); |
| return -ENODEV; |
| } |
| |
| dprintk ("Flags: 0x%x\n", psb->flags); |
| if ((psb->flags & 1)==0) { |
| dprintk ("Mobile voltage regulator\n"); |
| } else { |
| dprintk ("Desktop voltage regulator\n"); |
| } |
| |
| latency = psb->settlingtime; |
| if (latency < 100) { |
| printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. " |
| "Should be at least 100. Correcting.\n", latency); |
| latency = 100; |
| } |
| dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); |
| dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); |
| |
| p += sizeof (struct psb_s); |
| |
| pst = (struct pst_s *) p; |
| |
| for (j=0; j<psb->numpst; j++) { |
| pst = (struct pst_s *) p; |
| number_scales = pst->numpstates; |
| |
| if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && |
| (maxfid==pst->maxfid) && (startvid==pst->startvid)) |
| { |
| dprintk ("PST:%d (@%p)\n", j, pst); |
| dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", |
| pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); |
| |
| ret = get_ranges ((char *) pst + sizeof (struct pst_s)); |
| return ret; |
| } else { |
| unsigned int k; |
| p = (char *) pst + sizeof (struct pst_s); |
| for (k=0; k<number_scales; k++) |
| p+=2; |
| } |
| } |
| printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple); |
| printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n"); |
| |
| return -EINVAL; |
| } |
| p++; |
| } |
| |
| return -ENODEV; |
| } |
| |
| |
| static int powernow_target (struct cpufreq_policy *policy, |
| unsigned int target_freq, |
| unsigned int relation) |
| { |
| unsigned int newstate; |
| |
| if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate)) |
| return -EINVAL; |
| |
| change_speed(newstate); |
| |
| return 0; |
| } |
| |
| |
| static int powernow_verify (struct cpufreq_policy *policy) |
| { |
| return cpufreq_frequency_table_verify(policy, powernow_table); |
| } |
| |
| /* |
| * We use the fact that the bus frequency is somehow |
| * a multiple of 100000/3 khz, then we compute sgtc according |
| * to this multiple. |
| * That way, we match more how AMD thinks all of that work. |
| * We will then get the same kind of behaviour already tested under |
| * the "well-known" other OS. |
| */ |
| static int __init fixup_sgtc(void) |
| { |
| unsigned int sgtc; |
| unsigned int m; |
| |
| m = fsb / 3333; |
| if ((m % 10) >= 5) |
| m += 5; |
| |
| m /= 10; |
| |
| sgtc = 100 * m * latency; |
| sgtc = sgtc / 3; |
| if (sgtc > 0xfffff) { |
| printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); |
| sgtc = 0xfffff; |
| } |
| return sgtc; |
| } |
| |
| static unsigned int powernow_get(unsigned int cpu) |
| { |
| union msr_fidvidstatus fidvidstatus; |
| unsigned int cfid; |
| |
| if (cpu) |
| return 0; |
| rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); |
| cfid = fidvidstatus.bits.CFID; |
| |
| return (fsb * fid_codes[cfid] / 10); |
| } |
| |
| |
| static int __init acer_cpufreq_pst(const struct dmi_system_id *d) |
| { |
| printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident); |
| printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); |
| printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); |
| return 0; |
| } |
| |
| /* |
| * Some Athlon laptops have really fucked PST tables. |
| * A BIOS update is all that can save them. |
| * Mention this, and disable cpufreq. |
| */ |
| static struct dmi_system_id __initdata powernow_dmi_table[] = { |
| { |
| .callback = acer_cpufreq_pst, |
| .ident = "Acer Aspire", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), |
| DMI_MATCH(DMI_BIOS_VERSION, "3A71"), |
| }, |
| }, |
| { } |
| }; |
| |
| static int __init powernow_cpu_init (struct cpufreq_policy *policy) |
| { |
| union msr_fidvidstatus fidvidstatus; |
| int result; |
| |
| if (policy->cpu != 0) |
| return -ENODEV; |
| |
| rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); |
| |
| recalibrate_cpu_khz(); |
| |
| fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; |
| if (!fsb) { |
| printk(KERN_WARNING PFX "can not determine bus frequency\n"); |
| return -EINVAL; |
| } |
| dprintk("FSB: %3dMHz\n", fsb/1000); |
| |
| if (dmi_check_system(powernow_dmi_table) || acpi_force) { |
| printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); |
| result = powernow_acpi_init(); |
| } else { |
| result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); |
| if (result) { |
| printk (KERN_INFO PFX "Trying ACPI perflib\n"); |
| maximum_speed = 0; |
| minimum_speed = -1; |
| latency = 0; |
| result = powernow_acpi_init(); |
| if (result) { |
| printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); |
| printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); |
| } |
| } else { |
| /* SGTC use the bus clock as timer */ |
| latency = fixup_sgtc(); |
| printk(KERN_INFO PFX "SGTC: %d\n", latency); |
| } |
| } |
| |
| if (result) |
| return result; |
| |
| printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", |
| minimum_speed/1000, maximum_speed/1000); |
| |
| policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); |
| |
| policy->cur = powernow_get(0); |
| |
| cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); |
| |
| return cpufreq_frequency_table_cpuinfo(policy, powernow_table); |
| } |
| |
| static int powernow_cpu_exit (struct cpufreq_policy *policy) { |
| cpufreq_frequency_table_put_attr(policy->cpu); |
| |
| #ifdef CONFIG_X86_POWERNOW_K7_ACPI |
| if (acpi_processor_perf) { |
| acpi_processor_unregister_performance(acpi_processor_perf, 0); |
| free_cpumask_var(acpi_processor_perf->shared_cpu_map); |
| kfree(acpi_processor_perf); |
| } |
| #endif |
| |
| kfree(powernow_table); |
| return 0; |
| } |
| |
| static struct freq_attr* powernow_table_attr[] = { |
| &cpufreq_freq_attr_scaling_available_freqs, |
| NULL, |
| }; |
| |
| static struct cpufreq_driver powernow_driver = { |
| .verify = powernow_verify, |
| .target = powernow_target, |
| .get = powernow_get, |
| .init = powernow_cpu_init, |
| .exit = powernow_cpu_exit, |
| .name = "powernow-k7", |
| .owner = THIS_MODULE, |
| .attr = powernow_table_attr, |
| }; |
| |
| static int __init powernow_init (void) |
| { |
| if (check_powernow()==0) |
| return -ENODEV; |
| return cpufreq_register_driver(&powernow_driver); |
| } |
| |
| |
| static void __exit powernow_exit (void) |
| { |
| cpufreq_unregister_driver(&powernow_driver); |
| } |
| |
| module_param(acpi_force, int, 0444); |
| MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); |
| |
| MODULE_AUTHOR ("Dave Jones <davej@redhat.com>"); |
| MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); |
| MODULE_LICENSE ("GPL"); |
| |
| late_initcall(powernow_init); |
| module_exit(powernow_exit); |
| |