| # Greybus core |
| greybus-y := core.o \ |
| debugfs.o \ |
| hd.o \ |
| manifest.o \ |
| module.o \ |
| interface.o \ |
| bundle.o \ |
| connection.o \ |
| control.o \ |
| svc.o \ |
| svc_watchdog.o \ |
| operation.o |
| |
| obj-$(CONFIG_GREYBUS) += greybus.o |
| |
| # needed for trace events |
| ccflags-y += -I$(src) |
| |
| |
| # Greybus Host controller drivers |
| gb-es2-y := es2.o |
| |
| obj-$(CONFIG_GREYBUS_ES2) += gb-es2.o |
| |
| # Greybus class drivers |
| gb-bootrom-y := bootrom.o |
| gb-camera-y := camera.o |
| gb-firmware-y := fw-core.o fw-download.o fw-management.o authentication.o |
| gb-spilib-y := spilib.o |
| gb-hid-y := hid.o |
| gb-light-y := light.o |
| gb-log-y := log.o |
| gb-loopback-y := loopback.o |
| gb-power-supply-y := power_supply.o |
| gb-raw-y := raw.o |
| gb-vibrator-y := vibrator.o |
| |
| obj-$(CONFIG_GREYBUS_BOOTROM) += gb-bootrom.o |
| obj-$(CONFIG_GREYBUS_CAMERA) += gb-camera.o |
| obj-$(CONFIG_GREYBUS_FIRMWARE) += gb-firmware.o gb-spilib.o |
| obj-$(CONFIG_GREYBUS_HID) += gb-hid.o |
| obj-$(CONFIG_GREYBUS_LIGHT) += gb-light.o |
| obj-$(CONFIG_GREYBUS_LOG) += gb-log.o |
| obj-$(CONFIG_GREYBUS_LOOPBACK) += gb-loopback.o |
| obj-$(CONFIG_GREYBUS_POWER) += gb-power-supply.o |
| obj-$(CONFIG_GREYBUS_RAW) += gb-raw.o |
| obj-$(CONFIG_GREYBUS_VIBRATOR) += gb-vibrator.o |
| |
| # Greybus Audio is a bunch of modules |
| gb-audio-module-y := audio_module.o audio_topology.o |
| gb-audio-codec-y := audio_codec.o |
| gb-audio-gb-y := audio_gb.o |
| gb-audio-apbridgea-y := audio_apbridgea.o |
| gb-audio-manager-y := audio_manager.o audio_manager_module.o |
| |
| # Greybus Audio sysfs helpers can be useful when debugging |
| #GB_AUDIO_MANAGER_SYSFS ?= true |
| #ifeq ($(GB_AUDIO_MANAGER_SYSFS),true) |
| #gb-audio-manager-y += audio_manager_sysfs.o |
| #ccflags-y += -DGB_AUDIO_MANAGER_SYSFS |
| #endif |
| |
| obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-codec.o |
| obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-module.o |
| obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-gb.o |
| obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-apbridgea.o |
| obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-manager.o |
| |
| |
| # Greybus Bridged PHY drivers |
| gb-gbphy-y := gbphy.o |
| gb-gpio-y := gpio.o |
| gb-i2c-y := i2c.o |
| gb-pwm-y := pwm.o |
| gb-sdio-y := sdio.o |
| gb-spi-y := spi.o |
| gb-uart-y := uart.o |
| gb-usb-y := usb.o |
| |
| obj-$(CONFIG_GREYBUS_BRIDGED_PHY) += gb-gbphy.o |
| obj-$(CONFIG_GREYBUS_GPIO) += gb-gpio.o |
| obj-$(CONFIG_GREYBUS_I2C) += gb-i2c.o |
| obj-$(CONFIG_GREYBUS_PWM) += gb-pwm.o |
| obj-$(CONFIG_GREYBUS_SDIO) += gb-sdio.o |
| obj-$(CONFIG_GREYBUS_SPI) += gb-spi.o gb-spilib.o |
| obj-$(CONFIG_GREYBUS_UART) += gb-uart.o |
| obj-$(CONFIG_GREYBUS_USB) += gb-usb.o |
| |
| |
| # Greybus Platform driver |
| gb-arche-y := arche-platform.o arche-apb-ctrl.o |
| |
| obj-$(CONFIG_USB_HSIC_USB3613) += gb-arche.o |
