| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 2011 Wind River Systems, |
| * written by Ralf Baechle (ralf@linux-mips.org) |
| */ |
| #include <linux/bug.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/memblock.h> |
| #include <linux/export.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/of_address.h> |
| |
| #include <asm/cpu-info.h> |
| |
| /* |
| * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource |
| * assignments. |
| */ |
| |
| /* |
| * The PCI controller list. |
| */ |
| static LIST_HEAD(controllers); |
| |
| static int pci_initialized; |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| * |
| * Why? Because some silly external IO cards only decode |
| * the low 10 bits of the IO address. The 0x00-0xff region |
| * is reserved for motherboard devices that decode all 16 |
| * bits, so it's ok to allocate at, say, 0x2800-0x28ff, |
| * but we want to try to avoid allocating at 0x2900-0x2bff |
| * which might have be mirrored at 0x0100-0x03ff.. |
| */ |
| resource_size_t |
| pcibios_align_resource(void *data, const struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| struct pci_dev *dev = data; |
| struct pci_controller *hose = dev->sysdata; |
| resource_size_t start = res->start; |
| |
| if (res->flags & IORESOURCE_IO) { |
| /* Make sure we start at our min on all hoses */ |
| if (start < PCIBIOS_MIN_IO + hose->io_resource->start) |
| start = PCIBIOS_MIN_IO + hose->io_resource->start; |
| |
| /* |
| * Put everything into 0x00-0xff region modulo 0x400 |
| */ |
| if (start & 0x300) |
| start = (start + 0x3ff) & ~0x3ff; |
| } else if (res->flags & IORESOURCE_MEM) { |
| /* Make sure we start at our min on all hoses */ |
| if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start) |
| start = PCIBIOS_MIN_MEM + hose->mem_resource->start; |
| } |
| |
| return start; |
| } |
| |
| static void pcibios_scanbus(struct pci_controller *hose) |
| { |
| static int next_busno; |
| static int need_domain_info; |
| LIST_HEAD(resources); |
| struct pci_bus *bus; |
| struct pci_host_bridge *bridge; |
| int ret; |
| |
| bridge = pci_alloc_host_bridge(0); |
| if (!bridge) |
| return; |
| |
| if (hose->get_busno && pci_has_flag(PCI_PROBE_ONLY)) |
| next_busno = (*hose->get_busno)(); |
| |
| pci_add_resource_offset(&resources, |
| hose->mem_resource, hose->mem_offset); |
| pci_add_resource_offset(&resources, |
| hose->io_resource, hose->io_offset); |
| pci_add_resource(&resources, hose->busn_resource); |
| list_splice_init(&resources, &bridge->windows); |
| bridge->dev.parent = NULL; |
| bridge->sysdata = hose; |
| bridge->busnr = next_busno; |
| bridge->ops = hose->pci_ops; |
| bridge->swizzle_irq = pci_common_swizzle; |
| bridge->map_irq = pcibios_map_irq; |
| ret = pci_scan_root_bus_bridge(bridge); |
| if (ret) { |
| pci_free_host_bridge(bridge); |
| return; |
| } |
| |
| hose->bus = bus = bridge->bus; |
| |
| need_domain_info = need_domain_info || pci_domain_nr(bus); |
| set_pci_need_domain_info(hose, need_domain_info); |
| |
| next_busno = bus->busn_res.end + 1; |
| /* Don't allow 8-bit bus number overflow inside the hose - |
| reserve some space for bridges. */ |
| if (next_busno > 224) { |
| next_busno = 0; |
| need_domain_info = 1; |
| } |
| |
| /* |
| * We insert PCI resources into the iomem_resource and |
| * ioport_resource trees in either pci_bus_claim_resources() |
| * or pci_bus_assign_resources(). |
| */ |
| if (pci_has_flag(PCI_PROBE_ONLY)) { |
| pci_bus_claim_resources(bus); |
| } else { |
| struct pci_bus *child; |
| |
| pci_bus_size_bridges(bus); |
| pci_bus_assign_resources(bus); |
| list_for_each_entry(child, &bus->children, node) |
| pcie_bus_configure_settings(child); |
| } |
| pci_bus_add_devices(bus); |
| } |
| |
| #ifdef CONFIG_OF |
| void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node) |
| { |
| struct of_pci_range range; |
| struct of_pci_range_parser parser; |
| |
| pr_info("PCI host bridge %pOF ranges:\n", node); |
| hose->of_node = node; |
| |
| if (of_pci_range_parser_init(&parser, node)) |
| return; |
| |
| for_each_of_pci_range(&parser, &range) { |
| struct resource *res = NULL; |
| |
| switch (range.flags & IORESOURCE_TYPE_BITS) { |
| case IORESOURCE_IO: |
| pr_info(" IO 0x%016llx..0x%016llx\n", |
| range.cpu_addr, |
| range.cpu_addr + range.size - 1); |
| hose->io_map_base = |
| (unsigned long)ioremap(range.cpu_addr, |
| range.size); |
| res = hose->io_resource; |
| break; |
| case IORESOURCE_MEM: |
| pr_info(" MEM 0x%016llx..0x%016llx\n", |
| range.cpu_addr, |
| range.cpu_addr + range.size - 1); |
| res = hose->mem_resource; |
| break; |
| } |
| if (res != NULL) { |
| res->name = node->full_name; |
| res->flags = range.flags; |
| res->start = range.cpu_addr; |
| res->end = range.cpu_addr + range.size - 1; |
| res->parent = res->child = res->sibling = NULL; |
| } |
| } |
| } |
| |
| struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| |
| return of_node_get(hose->of_node); |
| } |
| #endif |
| |
| static DEFINE_MUTEX(pci_scan_mutex); |
| |
| void register_pci_controller(struct pci_controller *hose) |
| { |
| struct resource *parent; |
| |
| parent = hose->mem_resource->parent; |
| if (!parent) |
| parent = &iomem_resource; |
| |
| if (request_resource(parent, hose->mem_resource) < 0) |
| goto out; |
| |
| parent = hose->io_resource->parent; |
| if (!parent) |
| parent = &ioport_resource; |
| |
| if (request_resource(parent, hose->io_resource) < 0) { |
| release_resource(hose->mem_resource); |
| goto out; |
| } |
| |
| INIT_LIST_HEAD(&hose->list); |
| list_add_tail(&hose->list, &controllers); |
| |
| /* |
| * Do not panic here but later - this might happen before console init. |
| */ |
| if (!hose->io_map_base) { |
| printk(KERN_WARNING |
| "registering PCI controller with io_map_base unset\n"); |
| } |
| |
| /* |
| * Scan the bus if it is register after the PCI subsystem |
| * initialization. |
| */ |
| if (pci_initialized) { |
| mutex_lock(&pci_scan_mutex); |
| pcibios_scanbus(hose); |
| mutex_unlock(&pci_scan_mutex); |
| } |
| |
| return; |
| |
| out: |
| printk(KERN_WARNING |
| "Skipping PCI bus scan due to resource conflict\n"); |
| } |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_controller *hose; |
| |
| /* Scan all of the recorded PCI controllers. */ |
| list_for_each_entry(hose, &controllers, list) |
| pcibios_scanbus(hose); |
| |
| pci_initialized = 1; |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| static int pcibios_enable_resources(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { |
| /* Only set up the requested stuff */ |
| if (!(mask & (1<<idx))) |
| continue; |
| |
| r = &dev->resource[idx]; |
| if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) |
| continue; |
| if ((idx == PCI_ROM_RESOURCE) && |
| (!(r->flags & IORESOURCE_ROM_ENABLE))) |
| continue; |
| if (!r->start && r->end) { |
| pci_err(dev, |
| "can't enable device: resource collisions\n"); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (cmd != old_cmd) { |
| pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| int err; |
| |
| if ((err = pcibios_enable_resources(dev, mask)) < 0) |
| return err; |
| |
| return pcibios_plat_dev_init(dev); |
| } |
| |
| void pcibios_fixup_bus(struct pci_bus *bus) |
| { |
| struct pci_dev *dev = bus->self; |
| |
| if (pci_has_flag(PCI_PROBE_ONLY) && dev && |
| (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { |
| pci_read_bridge_bases(bus); |
| } |
| } |
| |
| char * (*pcibios_plat_setup)(char *str) __initdata; |
| |
| char *__init pcibios_setup(char *str) |
| { |
| if (pcibios_plat_setup) |
| return pcibios_plat_setup(str); |
| return str; |
| } |