| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_mount.h" |
| #include "xfs_defer.h" |
| #include "xfs_da_format.h" |
| #include "xfs_da_btree.h" |
| #include "xfs_attr_sf.h" |
| #include "xfs_inode.h" |
| #include "xfs_trans.h" |
| #include "xfs_bmap.h" |
| #include "xfs_bmap_btree.h" |
| #include "xfs_attr.h" |
| #include "xfs_attr_leaf.h" |
| #include "xfs_attr_remote.h" |
| #include "xfs_quota.h" |
| #include "xfs_trans_space.h" |
| #include "xfs_trace.h" |
| |
| /* |
| * xfs_attr.c |
| * |
| * Provide the external interfaces to manage attribute lists. |
| */ |
| |
| /*======================================================================== |
| * Function prototypes for the kernel. |
| *========================================================================*/ |
| |
| /* |
| * Internal routines when attribute list fits inside the inode. |
| */ |
| STATIC int xfs_attr_shortform_addname(xfs_da_args_t *args); |
| |
| /* |
| * Internal routines when attribute list is one block. |
| */ |
| STATIC int xfs_attr_leaf_get(xfs_da_args_t *args); |
| STATIC int xfs_attr_leaf_addname(xfs_da_args_t *args); |
| STATIC int xfs_attr_leaf_removename(xfs_da_args_t *args); |
| STATIC int xfs_attr_leaf_hasname(struct xfs_da_args *args, struct xfs_buf **bp); |
| |
| /* |
| * Internal routines when attribute list is more than one block. |
| */ |
| STATIC int xfs_attr_node_get(xfs_da_args_t *args); |
| STATIC int xfs_attr_node_addname(xfs_da_args_t *args); |
| STATIC int xfs_attr_node_removename(xfs_da_args_t *args); |
| STATIC int xfs_attr_node_hasname(xfs_da_args_t *args, |
| struct xfs_da_state **state); |
| STATIC int xfs_attr_fillstate(xfs_da_state_t *state); |
| STATIC int xfs_attr_refillstate(xfs_da_state_t *state); |
| |
| int |
| xfs_inode_hasattr( |
| struct xfs_inode *ip) |
| { |
| if (!XFS_IFORK_Q(ip) || |
| (ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS && |
| ip->i_afp->if_nextents == 0)) |
| return 0; |
| return 1; |
| } |
| |
| /*======================================================================== |
| * Overall external interface routines. |
| *========================================================================*/ |
| |
| /* |
| * Retrieve an extended attribute and its value. Must have ilock. |
| * Returns 0 on successful retrieval, otherwise an error. |
| */ |
| int |
| xfs_attr_get_ilocked( |
| struct xfs_da_args *args) |
| { |
| ASSERT(xfs_isilocked(args->dp, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL)); |
| |
| if (!xfs_inode_hasattr(args->dp)) |
| return -ENOATTR; |
| |
| if (args->dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) |
| return xfs_attr_shortform_getvalue(args); |
| if (xfs_bmap_one_block(args->dp, XFS_ATTR_FORK)) |
| return xfs_attr_leaf_get(args); |
| return xfs_attr_node_get(args); |
| } |
| |
| /* |
| * Retrieve an extended attribute by name, and its value if requested. |
| * |
| * If args->valuelen is zero, then the caller does not want the value, just an |
| * indication whether the attribute exists and the size of the value if it |
| * exists. The size is returned in args.valuelen. |
| * |
| * If args->value is NULL but args->valuelen is non-zero, allocate the buffer |
| * for the value after existence of the attribute has been determined. The |
| * caller always has to free args->value if it is set, no matter if this |
| * function was successful or not. |
| * |
| * If the attribute is found, but exceeds the size limit set by the caller in |
| * args->valuelen, return -ERANGE with the size of the attribute that was found |
| * in args->valuelen. |
| */ |
| int |
| xfs_attr_get( |
| struct xfs_da_args *args) |
| { |
| uint lock_mode; |
| int error; |
| |
| XFS_STATS_INC(args->dp->i_mount, xs_attr_get); |
| |
| if (XFS_FORCED_SHUTDOWN(args->dp->i_mount)) |
| return -EIO; |
| |
| args->geo = args->dp->i_mount->m_attr_geo; |
| args->whichfork = XFS_ATTR_FORK; |
| args->hashval = xfs_da_hashname(args->name, args->namelen); |
| |
| /* Entirely possible to look up a name which doesn't exist */ |
| args->op_flags = XFS_DA_OP_OKNOENT; |
| |
| lock_mode = xfs_ilock_attr_map_shared(args->dp); |
| error = xfs_attr_get_ilocked(args); |
| xfs_iunlock(args->dp, lock_mode); |
| |
| return error; |
| } |
| |
| /* |
| * Calculate how many blocks we need for the new attribute, |
| */ |
| STATIC int |
| xfs_attr_calc_size( |
| struct xfs_da_args *args, |
| int *local) |
| { |
| struct xfs_mount *mp = args->dp->i_mount; |
| int size; |
| int nblks; |
| |
| /* |
| * Determine space new attribute will use, and if it would be |
| * "local" or "remote" (note: local != inline). |
| */ |
| size = xfs_attr_leaf_newentsize(args, local); |
| nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK); |
| if (*local) { |
| if (size > (args->geo->blksize / 2)) { |
| /* Double split possible */ |
| nblks *= 2; |
| } |
| } else { |
| /* |
| * Out of line attribute, cannot double split, but |
| * make room for the attribute value itself. |
| */ |
| uint dblocks = xfs_attr3_rmt_blocks(mp, args->valuelen); |
| nblks += dblocks; |
| nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK); |
| } |
| |
| return nblks; |
| } |
| |
| STATIC int |
| xfs_attr_try_sf_addname( |
| struct xfs_inode *dp, |
| struct xfs_da_args *args) |
| { |
| |
| int error; |
| |
| /* |
| * Build initial attribute list (if required). |
| */ |
| if (dp->i_afp->if_format == XFS_DINODE_FMT_EXTENTS) |
| xfs_attr_shortform_create(args); |
| |
| error = xfs_attr_shortform_addname(args); |
| if (error == -ENOSPC) |
| return error; |
| |
| /* |
| * Commit the shortform mods, and we're done. |
| * NOTE: this is also the error path (EEXIST, etc). |
| */ |
| if (!error && !(args->op_flags & XFS_DA_OP_NOTIME)) |
| xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG); |
| |
| if (dp->i_mount->m_flags & XFS_MOUNT_WSYNC) |
| xfs_trans_set_sync(args->trans); |
| |
| return error; |
| } |
| |
| /* |
| * Check to see if the attr should be upgraded from non-existent or shortform to |
| * single-leaf-block attribute list. |
| */ |
| static inline bool |
| xfs_attr_is_shortform( |
| struct xfs_inode *ip) |
| { |
| return ip->i_afp->if_format == XFS_DINODE_FMT_LOCAL || |
| (ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS && |
| ip->i_afp->if_nextents == 0); |
| } |
| |
| /* |
| * Attempts to set an attr in shortform, or converts short form to leaf form if |
| * there is not enough room. If the attr is set, the transaction is committed |
| * and set to NULL. |
| */ |
| STATIC int |
| xfs_attr_set_shortform( |
| struct xfs_da_args *args, |
| struct xfs_buf **leaf_bp) |
| { |
| struct xfs_inode *dp = args->dp; |
| int error, error2 = 0; |
| |
| /* |
| * Try to add the attr to the attribute list in the inode. |
| */ |
| error = xfs_attr_try_sf_addname(dp, args); |
| if (error != -ENOSPC) { |
| error2 = xfs_trans_commit(args->trans); |
| args->trans = NULL; |
| return error ? error : error2; |
| } |
| /* |
| * It won't fit in the shortform, transform to a leaf block. GROT: |
| * another possible req'mt for a double-split btree op. |
| */ |
| error = xfs_attr_shortform_to_leaf(args, leaf_bp); |
| if (error) |
| return error; |
| |
| /* |
| * Prevent the leaf buffer from being unlocked so that a concurrent AIL |
| * push cannot grab the half-baked leaf buffer and run into problems |
| * with the write verifier. Once we're done rolling the transaction we |
| * can release the hold and add the attr to the leaf. |
| */ |
| xfs_trans_bhold(args->trans, *leaf_bp); |
| error = xfs_defer_finish(&args->trans); |
| xfs_trans_bhold_release(args->trans, *leaf_bp); |
| if (error) { |
| xfs_trans_brelse(args->trans, *leaf_bp); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Set the attribute specified in @args. |
| */ |
| int |
| xfs_attr_set_args( |
| struct xfs_da_args *args) |
| { |
| struct xfs_inode *dp = args->dp; |
| struct xfs_buf *leaf_bp = NULL; |
| int error = 0; |
| |
| /* |
| * If the attribute list is already in leaf format, jump straight to |
| * leaf handling. Otherwise, try to add the attribute to the shortform |
| * list; if there's no room then convert the list to leaf format and try |
| * again. |
| */ |
| if (xfs_attr_is_shortform(dp)) { |
| |
| /* |
| * If the attr was successfully set in shortform, the |
| * transaction is committed and set to NULL. Otherwise, is it |
| * converted from shortform to leaf, and the transaction is |
| * retained. |
| */ |
| error = xfs_attr_set_shortform(args, &leaf_bp); |
| if (error || !args->trans) |
| return error; |
| } |
| |
| if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_addname(args); |
| if (error != -ENOSPC) |
| return error; |
| |
| /* |
| * Promote the attribute list to the Btree format. |
| */ |
| error = xfs_attr3_leaf_to_node(args); |
| if (error) |
| return error; |
| |
| /* |
| * Finish any deferred work items and roll the transaction once |
| * more. The goal here is to call node_addname with the inode |
| * and transaction in the same state (inode locked and joined, |
| * transaction clean) no matter how we got to this step. |
| */ |
| error = xfs_defer_finish(&args->trans); |
| if (error) |
| return error; |
| |
| /* |
| * Commit the current trans (including the inode) and |
| * start a new one. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, dp); |
| if (error) |
| return error; |
| } |
| |
| error = xfs_attr_node_addname(args); |
| return error; |
| } |
| |
| /* |
| * Return EEXIST if attr is found, or ENOATTR if not |
| */ |
| int |
| xfs_has_attr( |
| struct xfs_da_args *args) |
| { |
| struct xfs_inode *dp = args->dp; |
| struct xfs_buf *bp = NULL; |
| int error; |
| |
| if (!xfs_inode_hasattr(dp)) |
| return -ENOATTR; |
| |
| if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) { |
| ASSERT(dp->i_afp->if_flags & XFS_IFINLINE); |
| return xfs_attr_sf_findname(args, NULL, NULL); |
| } |
| |
| if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_hasname(args, &bp); |
| |
| if (bp) |
| xfs_trans_brelse(args->trans, bp); |
| |
| return error; |
| } |
| |
| return xfs_attr_node_hasname(args, NULL); |
| } |
| |
| /* |
| * Remove the attribute specified in @args. |
| */ |
| int |
| xfs_attr_remove_args( |
| struct xfs_da_args *args) |
| { |
| struct xfs_inode *dp = args->dp; |
| int error; |
| |
| if (!xfs_inode_hasattr(dp)) { |
| error = -ENOATTR; |
| } else if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL) { |
| ASSERT(dp->i_afp->if_flags & XFS_IFINLINE); |
| error = xfs_attr_shortform_remove(args); |
| } else if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) { |
| error = xfs_attr_leaf_removename(args); |
| } else { |
| error = xfs_attr_node_removename(args); |
| } |
| |
| return error; |
| } |
| |
| /* |
| * Note: If args->value is NULL the attribute will be removed, just like the |
| * Linux ->setattr API. |
| */ |
| int |
| xfs_attr_set( |
| struct xfs_da_args *args) |
| { |
| struct xfs_inode *dp = args->dp; |
| struct xfs_mount *mp = dp->i_mount; |
| struct xfs_trans_res tres; |
| bool rsvd = (args->attr_filter & XFS_ATTR_ROOT); |
| int error, local; |
| unsigned int total; |
| |
| if (XFS_FORCED_SHUTDOWN(dp->i_mount)) |
| return -EIO; |
| |
| error = xfs_qm_dqattach(dp); |
| if (error) |
| return error; |
| |
| args->geo = mp->m_attr_geo; |
| args->whichfork = XFS_ATTR_FORK; |
| args->hashval = xfs_da_hashname(args->name, args->namelen); |
| |
| /* |
| * We have no control over the attribute names that userspace passes us |
| * to remove, so we have to allow the name lookup prior to attribute |
| * removal to fail as well. |
| */ |
| args->op_flags = XFS_DA_OP_OKNOENT; |
| |
| if (args->value) { |
| XFS_STATS_INC(mp, xs_attr_set); |
| |
| args->op_flags |= XFS_DA_OP_ADDNAME; |
| args->total = xfs_attr_calc_size(args, &local); |
| |
| /* |
| * If the inode doesn't have an attribute fork, add one. |
| * (inode must not be locked when we call this routine) |
| */ |
| if (XFS_IFORK_Q(dp) == 0) { |
| int sf_size = sizeof(struct xfs_attr_sf_hdr) + |
| xfs_attr_sf_entsize_byname(args->namelen, |
| args->valuelen); |
| |
| error = xfs_bmap_add_attrfork(dp, sf_size, rsvd); |
| if (error) |
| return error; |
| } |
| |
| tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres + |
| M_RES(mp)->tr_attrsetrt.tr_logres * |
| args->total; |
| tres.tr_logcount = XFS_ATTRSET_LOG_COUNT; |
| tres.tr_logflags = XFS_TRANS_PERM_LOG_RES; |
| total = args->total; |
| } else { |
| XFS_STATS_INC(mp, xs_attr_remove); |
| |
| tres = M_RES(mp)->tr_attrrm; |
| total = XFS_ATTRRM_SPACE_RES(mp); |
| } |
| |
| /* |
| * Root fork attributes can use reserved data blocks for this |
| * operation if necessary |
| */ |
| error = xfs_trans_alloc(mp, &tres, total, 0, |
| rsvd ? XFS_TRANS_RESERVE : 0, &args->trans); |
| if (error) |
| return error; |
| |
| xfs_ilock(dp, XFS_ILOCK_EXCL); |
| xfs_trans_ijoin(args->trans, dp, 0); |
| if (args->value) { |
| unsigned int quota_flags = XFS_QMOPT_RES_REGBLKS; |
| |
| if (rsvd) |
| quota_flags |= XFS_QMOPT_FORCE_RES; |
| error = xfs_trans_reserve_quota_nblks(args->trans, dp, |
| args->total, 0, quota_flags); |
| if (error) |
| goto out_trans_cancel; |
| |
| error = xfs_has_attr(args); |
| if (error == -EEXIST && (args->attr_flags & XATTR_CREATE)) |
| goto out_trans_cancel; |
| if (error == -ENOATTR && (args->attr_flags & XATTR_REPLACE)) |
| goto out_trans_cancel; |
| if (error != -ENOATTR && error != -EEXIST) |
| goto out_trans_cancel; |
| |
| error = xfs_attr_set_args(args); |
| if (error) |
| goto out_trans_cancel; |
| /* shortform attribute has already been committed */ |
| if (!args->trans) |
| goto out_unlock; |
| } else { |
| error = xfs_has_attr(args); |
| if (error != -EEXIST) |
| goto out_trans_cancel; |
| |
| error = xfs_attr_remove_args(args); |
| if (error) |
| goto out_trans_cancel; |
| } |
| |
| /* |
| * If this is a synchronous mount, make sure that the |
| * transaction goes to disk before returning to the user. |
| */ |
| if (mp->m_flags & XFS_MOUNT_WSYNC) |
| xfs_trans_set_sync(args->trans); |
| |
| if (!(args->op_flags & XFS_DA_OP_NOTIME)) |
| xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG); |
| |
| /* |
| * Commit the last in the sequence of transactions. |
| */ |
| xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE); |
| error = xfs_trans_commit(args->trans); |
| out_unlock: |
| xfs_iunlock(dp, XFS_ILOCK_EXCL); |
| return error; |
| |
| out_trans_cancel: |
| if (args->trans) |
| xfs_trans_cancel(args->trans); |
| goto out_unlock; |
| } |
| |
| /*======================================================================== |
| * External routines when attribute list is inside the inode |
| *========================================================================*/ |
| |
| static inline int xfs_attr_sf_totsize(struct xfs_inode *dp) |
| { |
| struct xfs_attr_shortform *sf; |
| |
| sf = (struct xfs_attr_shortform *)dp->i_afp->if_u1.if_data; |
| return be16_to_cpu(sf->hdr.totsize); |
| } |
| |
| /* |
| * Add a name to the shortform attribute list structure |
| * This is the external routine. |
| */ |
| STATIC int |
| xfs_attr_shortform_addname(xfs_da_args_t *args) |
| { |
| int newsize, forkoff, retval; |
| |
| trace_xfs_attr_sf_addname(args); |
| |
| retval = xfs_attr_shortform_lookup(args); |
| if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE)) |
| return retval; |
| if (retval == -EEXIST) { |
| if (args->attr_flags & XATTR_CREATE) |
| return retval; |
| retval = xfs_attr_shortform_remove(args); |
| if (retval) |
| return retval; |
| /* |
| * Since we have removed the old attr, clear ATTR_REPLACE so |
| * that the leaf format add routine won't trip over the attr |
| * not being around. |
| */ |
| args->attr_flags &= ~XATTR_REPLACE; |
| } |
| |
| if (args->namelen >= XFS_ATTR_SF_ENTSIZE_MAX || |
| args->valuelen >= XFS_ATTR_SF_ENTSIZE_MAX) |
| return -ENOSPC; |
| |
| newsize = xfs_attr_sf_totsize(args->dp); |
| newsize += xfs_attr_sf_entsize_byname(args->namelen, args->valuelen); |
| |
| forkoff = xfs_attr_shortform_bytesfit(args->dp, newsize); |
| if (!forkoff) |
| return -ENOSPC; |
| |
| xfs_attr_shortform_add(args, forkoff); |
| return 0; |
| } |
| |
| |
| /*======================================================================== |
| * External routines when attribute list is one block |
| *========================================================================*/ |
| |
| /* Store info about a remote block */ |
| STATIC void |
| xfs_attr_save_rmt_blk( |
| struct xfs_da_args *args) |
| { |
| args->blkno2 = args->blkno; |
| args->index2 = args->index; |
| args->rmtblkno2 = args->rmtblkno; |
| args->rmtblkcnt2 = args->rmtblkcnt; |
| args->rmtvaluelen2 = args->rmtvaluelen; |
| } |
| |
| /* Set stored info about a remote block */ |
| STATIC void |
| xfs_attr_restore_rmt_blk( |
| struct xfs_da_args *args) |
| { |
| args->blkno = args->blkno2; |
| args->index = args->index2; |
| args->rmtblkno = args->rmtblkno2; |
| args->rmtblkcnt = args->rmtblkcnt2; |
| args->rmtvaluelen = args->rmtvaluelen2; |
| } |
| |
| /* |
| * Tries to add an attribute to an inode in leaf form |
| * |
| * This function is meant to execute as part of a delayed operation and leaves |
| * the transaction handling to the caller. On success the attribute is added |
| * and the inode and transaction are left dirty. If there is not enough space, |
| * the attr data is converted to node format and -ENOSPC is returned. Caller is |
| * responsible for handling the dirty inode and transaction or adding the attr |
| * in node format. |
| */ |
| STATIC int |
| xfs_attr_leaf_try_add( |
| struct xfs_da_args *args, |
| struct xfs_buf *bp) |
| { |
| int retval; |
| |
| /* |
| * Look up the given attribute in the leaf block. Figure out if |
| * the given flags produce an error or call for an atomic rename. |
| */ |
| retval = xfs_attr_leaf_hasname(args, &bp); |
| if (retval != -ENOATTR && retval != -EEXIST) |
| return retval; |
| if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE)) |
| goto out_brelse; |
| if (retval == -EEXIST) { |
| if (args->attr_flags & XATTR_CREATE) |
| goto out_brelse; |
| |
| trace_xfs_attr_leaf_replace(args); |
| |
| /* save the attribute state for later removal*/ |
| args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */ |
| xfs_attr_save_rmt_blk(args); |
| |
| /* |
| * clear the remote attr state now that it is saved so that the |
| * values reflect the state of the attribute we are about to |
| * add, not the attribute we just found and will remove later. |
| */ |
| args->rmtblkno = 0; |
| args->rmtblkcnt = 0; |
| args->rmtvaluelen = 0; |
| } |
| |
| /* |
| * Add the attribute to the leaf block |
| */ |
| return xfs_attr3_leaf_add(bp, args); |
| |
| out_brelse: |
| xfs_trans_brelse(args->trans, bp); |
| return retval; |
| } |
| |
| |
| /* |
| * Add a name to the leaf attribute list structure |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| */ |
| STATIC int |
| xfs_attr_leaf_addname( |
| struct xfs_da_args *args) |
| { |
| int error, forkoff; |
| struct xfs_buf *bp = NULL; |
| struct xfs_inode *dp = args->dp; |
| |
| trace_xfs_attr_leaf_addname(args); |
| |
| error = xfs_attr_leaf_try_add(args, bp); |
| if (error) |
| return error; |
| |
| /* |
| * Commit the transaction that added the attr name so that |
| * later routines can manage their own transactions. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, dp); |
| if (error) |
| return error; |
| |
| /* |
| * If there was an out-of-line value, allocate the blocks we |
| * identified for its storage and copy the value. This is done |
| * after we create the attribute so that we don't overflow the |
| * maximum size of a transaction and/or hit a deadlock. |
| */ |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_rmtval_set(args); |
| if (error) |
| return error; |
| } |
| |
| if (!(args->op_flags & XFS_DA_OP_RENAME)) { |
| /* |
| * Added a "remote" value, just clear the incomplete flag. |
| */ |
| if (args->rmtblkno > 0) |
| error = xfs_attr3_leaf_clearflag(args); |
| |
| return error; |
| } |
| |
| /* |
| * If this is an atomic rename operation, we must "flip" the incomplete |
| * flags on the "new" and "old" attribute/value pairs so that one |
| * disappears and one appears atomically. Then we must remove the "old" |
| * attribute/value pair. |
| * |
| * In a separate transaction, set the incomplete flag on the "old" attr |
| * and clear the incomplete flag on the "new" attr. |
| */ |
| |
| error = xfs_attr3_leaf_flipflags(args); |
| if (error) |
| return error; |
| /* |
| * Commit the flag value change and start the next trans in series. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, args->dp); |
| if (error) |
| return error; |
| |
| /* |
| * Dismantle the "old" attribute/value pair by removing a "remote" value |
| * (if it exists). |
| */ |
| xfs_attr_restore_rmt_blk(args); |
| |
| if (args->rmtblkno) { |
| error = xfs_attr_rmtval_invalidate(args); |
| if (error) |
| return error; |
| |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| return error; |
| } |
| |
| /* |
| * Read in the block containing the "old" attr, then remove the "old" |
| * attr from that block (neat, huh!) |
| */ |
| error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, |
| &bp); |
| if (error) |
| return error; |
| |
| xfs_attr3_leaf_remove(bp, args); |
| |
| /* |
| * If the result is small enough, shrink it all into the inode. |
| */ |
| forkoff = xfs_attr_shortform_allfit(bp, dp); |
| if (forkoff) |
| error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| |
| return error; |
| } |
| |
| /* |
| * Return EEXIST if attr is found, or ENOATTR if not |
| */ |
| STATIC int |
| xfs_attr_leaf_hasname( |
| struct xfs_da_args *args, |
| struct xfs_buf **bp) |
| { |
| int error = 0; |
| |
| error = xfs_attr3_leaf_read(args->trans, args->dp, 0, bp); |
| if (error) |
| return error; |
| |
| error = xfs_attr3_leaf_lookup_int(*bp, args); |
| if (error != -ENOATTR && error != -EEXIST) |
| xfs_trans_brelse(args->trans, *bp); |
| |
| return error; |
| } |
| |
| /* |
| * Remove a name from the leaf attribute list structure |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| */ |
| STATIC int |
| xfs_attr_leaf_removename( |
| struct xfs_da_args *args) |
| { |
| struct xfs_inode *dp; |
| struct xfs_buf *bp; |
| int error, forkoff; |
| |
| trace_xfs_attr_leaf_removename(args); |
| |
| /* |
| * Remove the attribute. |
| */ |
| dp = args->dp; |
| |
| error = xfs_attr_leaf_hasname(args, &bp); |
| |
| if (error == -ENOATTR) { |
| xfs_trans_brelse(args->trans, bp); |
| return error; |
| } else if (error != -EEXIST) |
| return error; |
| |
| xfs_attr3_leaf_remove(bp, args); |
| |
| /* |
| * If the result is small enough, shrink it all into the inode. |
| */ |
| forkoff = xfs_attr_shortform_allfit(bp, dp); |
| if (forkoff) |
| return xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| |
| return 0; |
| } |
| |
| /* |
| * Look up a name in a leaf attribute list structure. |
| * |
| * This leaf block cannot have a "remote" value, we only call this routine |
| * if bmap_one_block() says there is only one block (ie: no remote blks). |
| * |
| * Returns 0 on successful retrieval, otherwise an error. |
| */ |
| STATIC int |
| xfs_attr_leaf_get(xfs_da_args_t *args) |
| { |
| struct xfs_buf *bp; |
| int error; |
| |
| trace_xfs_attr_leaf_get(args); |
| |
| error = xfs_attr_leaf_hasname(args, &bp); |
| |
| if (error == -ENOATTR) { |
| xfs_trans_brelse(args->trans, bp); |
| return error; |
| } else if (error != -EEXIST) |
| return error; |
| |
| |
| error = xfs_attr3_leaf_getvalue(bp, args); |
| xfs_trans_brelse(args->trans, bp); |
| return error; |
| } |
| |
| /* |
| * Return EEXIST if attr is found, or ENOATTR if not |
| * statep: If not null is set to point at the found state. Caller will |
| * be responsible for freeing the state in this case. |
| */ |
| STATIC int |
| xfs_attr_node_hasname( |
| struct xfs_da_args *args, |
| struct xfs_da_state **statep) |
| { |
| struct xfs_da_state *state; |
| int retval, error; |
| |
| state = xfs_da_state_alloc(args); |
| if (statep != NULL) |
| *statep = NULL; |
| |
| /* |
| * Search to see if name exists, and get back a pointer to it. |
| */ |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error) { |
| xfs_da_state_free(state); |
| return error; |
| } |
| |
| if (statep != NULL) |
| *statep = state; |
| else |
| xfs_da_state_free(state); |
| return retval; |
| } |
| |
| /*======================================================================== |
| * External routines when attribute list size > geo->blksize |
| *========================================================================*/ |
| |
| /* |
| * Add a name to a Btree-format attribute list. |
| * |
| * This will involve walking down the Btree, and may involve splitting |
| * leaf nodes and even splitting intermediate nodes up to and including |
| * the root node (a special case of an intermediate node). |
| * |
| * "Remote" attribute values confuse the issue and atomic rename operations |
| * add a whole extra layer of confusion on top of that. |
| */ |
| STATIC int |
| xfs_attr_node_addname( |
| struct xfs_da_args *args) |
| { |
| struct xfs_da_state *state; |
| struct xfs_da_state_blk *blk; |
| struct xfs_inode *dp; |
| int retval, error; |
| |
| trace_xfs_attr_node_addname(args); |
| |
| /* |
| * Fill in bucket of arguments/results/context to carry around. |
| */ |
| dp = args->dp; |
| restart: |
| /* |
| * Search to see if name already exists, and get back a pointer |
| * to where it should go. |
| */ |
| error = 0; |
| retval = xfs_attr_node_hasname(args, &state); |
| if (retval != -ENOATTR && retval != -EEXIST) |
| goto out; |
| |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE)) |
| goto out; |
| if (retval == -EEXIST) { |
| if (args->attr_flags & XATTR_CREATE) |
| goto out; |
| |
| trace_xfs_attr_node_replace(args); |
| |
| /* save the attribute state for later removal*/ |
| args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */ |
| xfs_attr_save_rmt_blk(args); |
| |
| /* |
| * clear the remote attr state now that it is saved so that the |
| * values reflect the state of the attribute we are about to |
| * add, not the attribute we just found and will remove later. |
| */ |
| args->rmtblkno = 0; |
| args->rmtblkcnt = 0; |
| args->rmtvaluelen = 0; |
| } |
| |
| retval = xfs_attr3_leaf_add(blk->bp, state->args); |
| if (retval == -ENOSPC) { |
| if (state->path.active == 1) { |
| /* |
| * Its really a single leaf node, but it had |
| * out-of-line values so it looked like it *might* |
| * have been a b-tree. |
| */ |
| xfs_da_state_free(state); |
| state = NULL; |
| error = xfs_attr3_leaf_to_node(args); |
| if (error) |
| goto out; |
| error = xfs_defer_finish(&args->trans); |
| if (error) |
| goto out; |
| |
| /* |
| * Commit the node conversion and start the next |
| * trans in the chain. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, dp); |
| if (error) |
| goto out; |
| |
| goto restart; |
| } |
| |
| /* |
| * Split as many Btree elements as required. |
| * This code tracks the new and old attr's location |
| * in the index/blkno/rmtblkno/rmtblkcnt fields and |
| * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. |
| */ |
| error = xfs_da3_split(state); |
| if (error) |
| goto out; |
| error = xfs_defer_finish(&args->trans); |
| if (error) |
| goto out; |
| } else { |
| /* |
| * Addition succeeded, update Btree hashvals. |
| */ |
| xfs_da3_fixhashpath(state, &state->path); |
| } |
| |
| /* |
| * Kill the state structure, we're done with it and need to |
| * allow the buffers to come back later. |
| */ |
| xfs_da_state_free(state); |
| state = NULL; |
| |
| /* |
| * Commit the leaf addition or btree split and start the next |
| * trans in the chain. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, dp); |
| if (error) |
| goto out; |
| |
| /* |
| * If there was an out-of-line value, allocate the blocks we |
| * identified for its storage and copy the value. This is done |
| * after we create the attribute so that we don't overflow the |
| * maximum size of a transaction and/or hit a deadlock. |
| */ |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_rmtval_set(args); |
| if (error) |
| return error; |
| } |
| |
| if (!(args->op_flags & XFS_DA_OP_RENAME)) { |
| /* |
| * Added a "remote" value, just clear the incomplete flag. |
| */ |
| if (args->rmtblkno > 0) |
| error = xfs_attr3_leaf_clearflag(args); |
| retval = error; |
| goto out; |
| } |
| |
| /* |
| * If this is an atomic rename operation, we must "flip" the incomplete |
| * flags on the "new" and "old" attribute/value pairs so that one |
| * disappears and one appears atomically. Then we must remove the "old" |
| * attribute/value pair. |
| * |
| * In a separate transaction, set the incomplete flag on the "old" attr |
| * and clear the incomplete flag on the "new" attr. |
| */ |
| error = xfs_attr3_leaf_flipflags(args); |
| if (error) |
| goto out; |
| /* |
| * Commit the flag value change and start the next trans in series |
| */ |
| error = xfs_trans_roll_inode(&args->trans, args->dp); |
| if (error) |
| goto out; |
| |
| /* |
| * Dismantle the "old" attribute/value pair by removing a "remote" value |
| * (if it exists). |
| */ |
| xfs_attr_restore_rmt_blk(args); |
| |
| if (args->rmtblkno) { |
| error = xfs_attr_rmtval_invalidate(args); |
| if (error) |
| return error; |
| |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| return error; |
| } |
| |
| /* |
| * Re-find the "old" attribute entry after any split ops. The INCOMPLETE |
| * flag means that we will find the "old" attr, not the "new" one. |
| */ |
| args->attr_filter |= XFS_ATTR_INCOMPLETE; |
| state = xfs_da_state_alloc(args); |
| state->inleaf = 0; |
| error = xfs_da3_node_lookup_int(state, &retval); |
| if (error) |
| goto out; |
| |
| /* |
| * Remove the name and update the hashvals in the tree. |
| */ |
| blk = &state->path.blk[state->path.active-1]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| error = xfs_attr3_leaf_remove(blk->bp, args); |
| xfs_da3_fixhashpath(state, &state->path); |
| |
| /* |
| * Check to see if the tree needs to be collapsed. |
| */ |
| if (retval && (state->path.active > 1)) { |
| error = xfs_da3_join(state); |
| if (error) |
| goto out; |
| } |
| retval = error = 0; |
| |
| out: |
| if (state) |
| xfs_da_state_free(state); |
| if (error) |
| return error; |
| return retval; |
| } |
| |
| /* |
| * Shrink an attribute from leaf to shortform |
| */ |
| STATIC int |
| xfs_attr_node_shrink( |
| struct xfs_da_args *args, |
| struct xfs_da_state *state) |
| { |
| struct xfs_inode *dp = args->dp; |
| int error, forkoff; |
| struct xfs_buf *bp; |
| |
| /* |
| * Have to get rid of the copy of this dabuf in the state. |
| */ |
| ASSERT(state->path.active == 1); |
| ASSERT(state->path.blk[0].bp); |
| state->path.blk[0].bp = NULL; |
| |
| error = xfs_attr3_leaf_read(args->trans, args->dp, 0, &bp); |
| if (error) |
| return error; |
| |
| forkoff = xfs_attr_shortform_allfit(bp, dp); |
| if (forkoff) { |
| error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); |
| /* bp is gone due to xfs_da_shrink_inode */ |
| } else |
| xfs_trans_brelse(args->trans, bp); |
| |
| return error; |
| } |
| |
| /* |
| * Mark an attribute entry INCOMPLETE and save pointers to the relevant buffers |
| * for later deletion of the entry. |
| */ |
| STATIC int |
| xfs_attr_leaf_mark_incomplete( |
| struct xfs_da_args *args, |
| struct xfs_da_state *state) |
| { |
| int error; |
| |
| /* |
| * Fill in disk block numbers in the state structure |
| * so that we can get the buffers back after we commit |
| * several transactions in the following calls. |
| */ |
| error = xfs_attr_fillstate(state); |
| if (error) |
| return error; |
| |
| /* |
| * Mark the attribute as INCOMPLETE |
| */ |
| return xfs_attr3_leaf_setflag(args); |
| } |
| |
| /* |
| * Initial setup for xfs_attr_node_removename. Make sure the attr is there and |
| * the blocks are valid. Attr keys with remote blocks will be marked |
| * incomplete. |
| */ |
| STATIC |
| int xfs_attr_node_removename_setup( |
| struct xfs_da_args *args, |
| struct xfs_da_state **state) |
| { |
| int error; |
| |
| error = xfs_attr_node_hasname(args, state); |
| if (error != -EEXIST) |
| return error; |
| |
| ASSERT((*state)->path.blk[(*state)->path.active - 1].bp != NULL); |
| ASSERT((*state)->path.blk[(*state)->path.active - 1].magic == |
| XFS_ATTR_LEAF_MAGIC); |
| |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_leaf_mark_incomplete(args, *state); |
| if (error) |
| return error; |
| |
| return xfs_attr_rmtval_invalidate(args); |
| } |
| |
| return 0; |
| } |
| |
| STATIC int |
| xfs_attr_node_remove_rmt( |
| struct xfs_da_args *args, |
| struct xfs_da_state *state) |
| { |
| int error = 0; |
| |
| error = xfs_attr_rmtval_remove(args); |
| if (error) |
| return error; |
| |
| /* |
| * Refill the state structure with buffers, the prior calls released our |
| * buffers. |
| */ |
| return xfs_attr_refillstate(state); |
| } |
| |
| /* |
| * Remove a name from a B-tree attribute list. |
| * |
| * This will involve walking down the Btree, and may involve joining |
| * leaf nodes and even joining intermediate nodes up to and including |
| * the root node (a special case of an intermediate node). |
| */ |
| STATIC int |
| xfs_attr_node_removename( |
| struct xfs_da_args *args) |
| { |
| struct xfs_da_state *state; |
| struct xfs_da_state_blk *blk; |
| int retval, error; |
| struct xfs_inode *dp = args->dp; |
| |
| trace_xfs_attr_node_removename(args); |
| |
| error = xfs_attr_node_removename_setup(args, &state); |
| if (error) |
| goto out; |
| |
| /* |
| * If there is an out-of-line value, de-allocate the blocks. |
| * This is done before we remove the attribute so that we don't |
| * overflow the maximum size of a transaction and/or hit a deadlock. |
| */ |
| if (args->rmtblkno > 0) { |
| error = xfs_attr_node_remove_rmt(args, state); |
| if (error) |
| goto out; |
| } |
| |
| /* |
| * Remove the name and update the hashvals in the tree. |
| */ |
| blk = &state->path.blk[ state->path.active-1 ]; |
| ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC); |
| retval = xfs_attr3_leaf_remove(blk->bp, args); |
| xfs_da3_fixhashpath(state, &state->path); |
| |
| /* |
| * Check to see if the tree needs to be collapsed. |
| */ |
| if (retval && (state->path.active > 1)) { |
| error = xfs_da3_join(state); |
| if (error) |
| goto out; |
| error = xfs_defer_finish(&args->trans); |
| if (error) |
| goto out; |
| /* |
| * Commit the Btree join operation and start a new trans. |
| */ |
| error = xfs_trans_roll_inode(&args->trans, dp); |
| if (error) |
| goto out; |
| } |
| |
| /* |
| * If the result is small enough, push it all into the inode. |
| */ |
| if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) |
| error = xfs_attr_node_shrink(args, state); |
| |
| out: |
| if (state) |
| xfs_da_state_free(state); |
| return error; |
| } |
| |
| /* |
| * Fill in the disk block numbers in the state structure for the buffers |
| * that are attached to the state structure. |
| * This is done so that we can quickly reattach ourselves to those buffers |
| * after some set of transaction commits have released these buffers. |
| */ |
| STATIC int |
| xfs_attr_fillstate(xfs_da_state_t *state) |
| { |
| xfs_da_state_path_t *path; |
| xfs_da_state_blk_t *blk; |
| int level; |
| |
| trace_xfs_attr_fillstate(state->args); |
| |
| /* |
| * Roll down the "path" in the state structure, storing the on-disk |
| * block number for those buffers in the "path". |
| */ |
| path = &state->path; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->bp) { |
| blk->disk_blkno = XFS_BUF_ADDR(blk->bp); |
| blk->bp = NULL; |
| } else { |
| blk->disk_blkno = 0; |
| } |
| } |
| |
| /* |
| * Roll down the "altpath" in the state structure, storing the on-disk |
| * block number for those buffers in the "altpath". |
| */ |
| path = &state->altpath; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->bp) { |
| blk->disk_blkno = XFS_BUF_ADDR(blk->bp); |
| blk->bp = NULL; |
| } else { |
| blk->disk_blkno = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Reattach the buffers to the state structure based on the disk block |
| * numbers stored in the state structure. |
| * This is done after some set of transaction commits have released those |
| * buffers from our grip. |
| */ |
| STATIC int |
| xfs_attr_refillstate(xfs_da_state_t *state) |
| { |
| xfs_da_state_path_t *path; |
| xfs_da_state_blk_t *blk; |
| int level, error; |
| |
| trace_xfs_attr_refillstate(state->args); |
| |
| /* |
| * Roll down the "path" in the state structure, storing the on-disk |
| * block number for those buffers in the "path". |
| */ |
| path = &state->path; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->disk_blkno) { |
| error = xfs_da3_node_read_mapped(state->args->trans, |
| state->args->dp, blk->disk_blkno, |
| &blk->bp, XFS_ATTR_FORK); |
| if (error) |
| return error; |
| } else { |
| blk->bp = NULL; |
| } |
| } |
| |
| /* |
| * Roll down the "altpath" in the state structure, storing the on-disk |
| * block number for those buffers in the "altpath". |
| */ |
| path = &state->altpath; |
| ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH)); |
| for (blk = path->blk, level = 0; level < path->active; blk++, level++) { |
| if (blk->disk_blkno) { |
| error = xfs_da3_node_read_mapped(state->args->trans, |
| state->args->dp, blk->disk_blkno, |
| &blk->bp, XFS_ATTR_FORK); |
| if (error) |
| return error; |
| } else { |
| blk->bp = NULL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Retrieve the attribute data from a node attribute list. |
| * |
| * This routine gets called for any attribute fork that has more than one |
| * block, ie: both true Btree attr lists and for single-leaf-blocks with |
| * "remote" values taking up more blocks. |
| * |
| * Returns 0 on successful retrieval, otherwise an error. |
| */ |
| STATIC int |
| xfs_attr_node_get( |
| struct xfs_da_args *args) |
| { |
| struct xfs_da_state *state; |
| struct xfs_da_state_blk *blk; |
| int i; |
| int error; |
| |
| trace_xfs_attr_node_get(args); |
| |
| /* |
| * Search to see if name exists, and get back a pointer to it. |
| */ |
| error = xfs_attr_node_hasname(args, &state); |
| if (error != -EEXIST) |
| goto out_release; |
| |
| /* |
| * Get the value, local or "remote" |
| */ |
| blk = &state->path.blk[state->path.active - 1]; |
| error = xfs_attr3_leaf_getvalue(blk->bp, args); |
| |
| /* |
| * If not in a transaction, we have to release all the buffers. |
| */ |
| out_release: |
| for (i = 0; state != NULL && i < state->path.active; i++) { |
| xfs_trans_brelse(args->trans, state->path.blk[i].bp); |
| state->path.blk[i].bp = NULL; |
| } |
| |
| if (state) |
| xfs_da_state_free(state); |
| return error; |
| } |
| |
| /* Returns true if the attribute entry name is valid. */ |
| bool |
| xfs_attr_namecheck( |
| const void *name, |
| size_t length) |
| { |
| /* |
| * MAXNAMELEN includes the trailing null, but (name/length) leave it |
| * out, so use >= for the length check. |
| */ |
| if (length >= MAXNAMELEN) |
| return false; |
| |
| /* There shouldn't be any nulls here */ |
| return !memchr(name, 0, length); |
| } |