| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * RTC subsystem, sysfs interface |
| * |
| * Copyright (C) 2005 Tower Technologies |
| * Author: Alessandro Zummo <a.zummo@towertech.it> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/rtc.h> |
| |
| #include "rtc-core.h" |
| |
| /* device attributes */ |
| |
| /* |
| * NOTE: RTC times displayed in sysfs use the RTC's timezone. That's |
| * ideally UTC. However, PCs that also boot to MS-Windows normally use |
| * the local time and change to match daylight savings time. That affects |
| * attributes including date, time, since_epoch, and wakealarm. |
| */ |
| |
| static ssize_t |
| name_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%s %s\n", dev_driver_string(dev->parent), |
| dev_name(dev->parent)); |
| } |
| static DEVICE_ATTR_RO(name); |
| |
| static ssize_t |
| date_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t retval; |
| struct rtc_time tm; |
| |
| retval = rtc_read_time(to_rtc_device(dev), &tm); |
| if (retval) |
| return retval; |
| |
| return sprintf(buf, "%ptRd\n", &tm); |
| } |
| static DEVICE_ATTR_RO(date); |
| |
| static ssize_t |
| time_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t retval; |
| struct rtc_time tm; |
| |
| retval = rtc_read_time(to_rtc_device(dev), &tm); |
| if (retval) |
| return retval; |
| |
| return sprintf(buf, "%ptRt\n", &tm); |
| } |
| static DEVICE_ATTR_RO(time); |
| |
| static ssize_t |
| since_epoch_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t retval; |
| struct rtc_time tm; |
| |
| retval = rtc_read_time(to_rtc_device(dev), &tm); |
| if (retval == 0) { |
| time64_t time; |
| |
| time = rtc_tm_to_time64(&tm); |
| retval = sprintf(buf, "%lld\n", time); |
| } |
| |
| return retval; |
| } |
| static DEVICE_ATTR_RO(since_epoch); |
| |
| static ssize_t |
| max_user_freq_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%d\n", to_rtc_device(dev)->max_user_freq); |
| } |
| |
| static ssize_t |
| max_user_freq_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t n) |
| { |
| struct rtc_device *rtc = to_rtc_device(dev); |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 0, &val); |
| if (err) |
| return err; |
| |
| if (val >= 4096 || val == 0) |
| return -EINVAL; |
| |
| rtc->max_user_freq = (int)val; |
| |
| return n; |
| } |
| static DEVICE_ATTR_RW(max_user_freq); |
| |
| /** |
| * rtc_sysfs_show_hctosys - indicate if the given RTC set the system time |
| * @dev: The device that the attribute belongs to. |
| * @attr: The attribute being read. |
| * @buf: The result buffer. |
| * |
| * buf is "1" if the system clock was set by this RTC at the last |
| * boot or resume event. |
| */ |
| static ssize_t |
| hctosys_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| #ifdef CONFIG_RTC_HCTOSYS_DEVICE |
| if (rtc_hctosys_ret == 0 && |
| strcmp(dev_name(&to_rtc_device(dev)->dev), |
| CONFIG_RTC_HCTOSYS_DEVICE) == 0) |
| return sprintf(buf, "1\n"); |
| #endif |
| return sprintf(buf, "0\n"); |
| } |
| static DEVICE_ATTR_RO(hctosys); |
| |
| static ssize_t |
| wakealarm_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t retval; |
| time64_t alarm; |
| struct rtc_wkalrm alm; |
| |
| /* Don't show disabled alarms. For uniformity, RTC alarms are |
| * conceptually one-shot, even though some common RTCs (on PCs) |
| * don't actually work that way. |
| * |
| * NOTE: RTC implementations where the alarm doesn't match an |
| * exact YYYY-MM-DD HH:MM[:SS] date *must* disable their RTC |
| * alarms after they trigger, to ensure one-shot semantics. |
| */ |
| retval = rtc_read_alarm(to_rtc_device(dev), &alm); |
| if (retval == 0 && alm.enabled) { |
| alarm = rtc_tm_to_time64(&alm.time); |
| retval = sprintf(buf, "%lld\n", alarm); |
| } |
| |
| return retval; |
| } |
| |
| static ssize_t |
| wakealarm_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t n) |
| { |
| ssize_t retval; |
| time64_t now, alarm; |
| time64_t push = 0; |
| struct rtc_wkalrm alm; |
| struct rtc_device *rtc = to_rtc_device(dev); |
| const char *buf_ptr; |
| int adjust = 0; |
| |
| /* Only request alarms that trigger in the future. Disable them |
| * by writing another time, e.g. 0 meaning Jan 1 1970 UTC. |
| */ |
| retval = rtc_read_time(rtc, &alm.time); |
| if (retval < 0) |
| return retval; |
| now = rtc_tm_to_time64(&alm.time); |
| |
| buf_ptr = buf; |
| if (*buf_ptr == '+') { |
| buf_ptr++; |
| if (*buf_ptr == '=') { |
| buf_ptr++; |
| push = 1; |
| } else { |
| adjust = 1; |
| } |
| } |
| retval = kstrtos64(buf_ptr, 0, &alarm); |
| if (retval) |
| return retval; |
| if (adjust) |
| alarm += now; |
| if (alarm > now || push) { |
| /* Avoid accidentally clobbering active alarms; we can't |
| * entirely prevent that here, without even the minimal |
| * locking from the /dev/rtcN api. |
| */ |
| retval = rtc_read_alarm(rtc, &alm); |
| if (retval < 0) |
| return retval; |
| if (alm.enabled) { |
| if (push) { |
| push = rtc_tm_to_time64(&alm.time); |
| alarm += push; |
| } else |
| return -EBUSY; |
| } else if (push) |
| return -EINVAL; |
| alm.enabled = 1; |
| } else { |
| alm.enabled = 0; |
| |
| /* Provide a valid future alarm time. Linux isn't EFI, |
| * this time won't be ignored when disabling the alarm. |
| */ |
| alarm = now + 300; |
| } |
| rtc_time64_to_tm(alarm, &alm.time); |
| |
| retval = rtc_set_alarm(rtc, &alm); |
| return (retval < 0) ? retval : n; |
| } |
| static DEVICE_ATTR_RW(wakealarm); |
| |
| static ssize_t |
| offset_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| ssize_t retval; |
| long offset; |
| |
| retval = rtc_read_offset(to_rtc_device(dev), &offset); |
| if (retval == 0) |
| retval = sprintf(buf, "%ld\n", offset); |
| |
| return retval; |
| } |
| |
| static ssize_t |
| offset_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t n) |
| { |
| ssize_t retval; |
| long offset; |
| |
| retval = kstrtol(buf, 10, &offset); |
| if (retval == 0) |
| retval = rtc_set_offset(to_rtc_device(dev), offset); |
| |
| return (retval < 0) ? retval : n; |
| } |
| static DEVICE_ATTR_RW(offset); |
| |
| static ssize_t |
| range_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "[%lld,%llu]\n", to_rtc_device(dev)->range_min, |
| to_rtc_device(dev)->range_max); |
| } |
| static DEVICE_ATTR_RO(range); |
| |
| static struct attribute *rtc_attrs[] = { |
| &dev_attr_name.attr, |
| &dev_attr_date.attr, |
| &dev_attr_time.attr, |
| &dev_attr_since_epoch.attr, |
| &dev_attr_max_user_freq.attr, |
| &dev_attr_hctosys.attr, |
| &dev_attr_wakealarm.attr, |
| &dev_attr_offset.attr, |
| &dev_attr_range.attr, |
| NULL, |
| }; |
| |
| /* The reason to trigger an alarm with no process watching it (via sysfs) |
| * is its side effect: waking from a system state like suspend-to-RAM or |
| * suspend-to-disk. So: no attribute unless that side effect is possible. |
| * (Userspace may disable that mechanism later.) |
| */ |
| static bool rtc_does_wakealarm(struct rtc_device *rtc) |
| { |
| if (!device_can_wakeup(rtc->dev.parent)) |
| return false; |
| |
| return !!test_bit(RTC_FEATURE_ALARM, rtc->features); |
| } |
| |
| static umode_t rtc_attr_is_visible(struct kobject *kobj, |
| struct attribute *attr, int n) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct rtc_device *rtc = to_rtc_device(dev); |
| umode_t mode = attr->mode; |
| |
| if (attr == &dev_attr_wakealarm.attr) { |
| if (!rtc_does_wakealarm(rtc)) |
| mode = 0; |
| } else if (attr == &dev_attr_offset.attr) { |
| if (!rtc->ops->set_offset) |
| mode = 0; |
| } else if (attr == &dev_attr_range.attr) { |
| if (!(rtc->range_max - rtc->range_min)) |
| mode = 0; |
| } |
| |
| return mode; |
| } |
| |
| static struct attribute_group rtc_attr_group = { |
| .is_visible = rtc_attr_is_visible, |
| .attrs = rtc_attrs, |
| }; |
| |
| static const struct attribute_group *rtc_attr_groups[] = { |
| &rtc_attr_group, |
| NULL |
| }; |
| |
| const struct attribute_group **rtc_get_dev_attribute_groups(void) |
| { |
| return rtc_attr_groups; |
| } |
| |
| int rtc_add_groups(struct rtc_device *rtc, const struct attribute_group **grps) |
| { |
| size_t old_cnt = 0, add_cnt = 0, new_cnt; |
| const struct attribute_group **groups, **old; |
| |
| if (!grps) |
| return -EINVAL; |
| |
| groups = rtc->dev.groups; |
| if (groups) |
| for (; *groups; groups++) |
| old_cnt++; |
| |
| for (groups = grps; *groups; groups++) |
| add_cnt++; |
| |
| new_cnt = old_cnt + add_cnt + 1; |
| groups = devm_kcalloc(&rtc->dev, new_cnt, sizeof(*groups), GFP_KERNEL); |
| if (!groups) |
| return -ENOMEM; |
| memcpy(groups, rtc->dev.groups, old_cnt * sizeof(*groups)); |
| memcpy(groups + old_cnt, grps, add_cnt * sizeof(*groups)); |
| groups[old_cnt + add_cnt] = NULL; |
| |
| old = rtc->dev.groups; |
| rtc->dev.groups = groups; |
| if (old && old != rtc_attr_groups) |
| devm_kfree(&rtc->dev, old); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rtc_add_groups); |
| |
| int rtc_add_group(struct rtc_device *rtc, const struct attribute_group *grp) |
| { |
| const struct attribute_group *groups[] = { grp, NULL }; |
| |
| return rtc_add_groups(rtc, groups); |
| } |
| EXPORT_SYMBOL(rtc_add_group); |