| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * acpi_bus.c - ACPI Bus Driver ($Revision: 80 $) |
| * |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| */ |
| |
| #define pr_fmt(fmt) "ACPI: " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/sched.h> |
| #include <linux/pm.h> |
| #include <linux/device.h> |
| #include <linux/proc_fs.h> |
| #include <linux/acpi.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/workqueue.h> |
| #include <linux/reboot.h> |
| #include <linux/delay.h> |
| #ifdef CONFIG_X86 |
| #include <asm/mpspec.h> |
| #include <linux/dmi.h> |
| #endif |
| #include <linux/acpi_viot.h> |
| #include <linux/pci.h> |
| #include <acpi/apei.h> |
| #include <linux/suspend.h> |
| #include <linux/prmt.h> |
| |
| #include "internal.h" |
| |
| struct acpi_device *acpi_root; |
| struct proc_dir_entry *acpi_root_dir; |
| EXPORT_SYMBOL(acpi_root_dir); |
| |
| #ifdef CONFIG_X86 |
| #ifdef CONFIG_ACPI_CUSTOM_DSDT |
| static inline int set_copy_dsdt(const struct dmi_system_id *id) |
| { |
| return 0; |
| } |
| #else |
| static int set_copy_dsdt(const struct dmi_system_id *id) |
| { |
| pr_notice("%s detected - force copy of DSDT to local memory\n", id->ident); |
| acpi_gbl_copy_dsdt_locally = 1; |
| return 0; |
| } |
| #endif |
| |
| static const struct dmi_system_id dsdt_dmi_table[] __initconst = { |
| /* |
| * Invoke DSDT corruption work-around on all Toshiba Satellite. |
| * https://bugzilla.kernel.org/show_bug.cgi?id=14679 |
| */ |
| { |
| .callback = set_copy_dsdt, |
| .ident = "TOSHIBA Satellite", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), |
| }, |
| }, |
| {} |
| }; |
| #endif |
| |
| /* -------------------------------------------------------------------------- |
| Device Management |
| -------------------------------------------------------------------------- */ |
| |
| acpi_status acpi_bus_get_status_handle(acpi_handle handle, |
| unsigned long long *sta) |
| { |
| acpi_status status; |
| |
| status = acpi_evaluate_integer(handle, "_STA", NULL, sta); |
| if (ACPI_SUCCESS(status)) |
| return AE_OK; |
| |
| if (status == AE_NOT_FOUND) { |
| *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | |
| ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING; |
| return AE_OK; |
| } |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(acpi_bus_get_status_handle); |
| |
| int acpi_bus_get_status(struct acpi_device *device) |
| { |
| acpi_status status; |
| unsigned long long sta; |
| |
| if (acpi_device_override_status(device, &sta)) { |
| acpi_set_device_status(device, sta); |
| return 0; |
| } |
| |
| /* Battery devices must have their deps met before calling _STA */ |
| if (acpi_device_is_battery(device) && device->dep_unmet) { |
| acpi_set_device_status(device, 0); |
| return 0; |
| } |
| |
| status = acpi_bus_get_status_handle(device->handle, &sta); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| if (!device->status.present && device->status.enabled) { |
| pr_info(FW_BUG "Device [%s] status [%08x]: not present and enabled\n", |
| device->pnp.bus_id, (u32)sta); |
| device->status.enabled = 0; |
| /* |
| * The status is clearly invalid, so clear the functional bit as |
| * well to avoid attempting to use the device. |
| */ |
| device->status.functional = 0; |
| } |
| |
| acpi_set_device_status(device, sta); |
| |
| if (device->status.functional && !device->status.present) { |
| pr_debug("Device [%s] status [%08x]: functional but not present\n", |
| device->pnp.bus_id, (u32)sta); |
| } |
| |
| pr_debug("Device [%s] status [%08x]\n", device->pnp.bus_id, (u32)sta); |
| return 0; |
| } |
| EXPORT_SYMBOL(acpi_bus_get_status); |
| |
| void acpi_bus_private_data_handler(acpi_handle handle, |
| void *context) |
| { |
| return; |
| } |
| EXPORT_SYMBOL(acpi_bus_private_data_handler); |
| |
| int acpi_bus_attach_private_data(acpi_handle handle, void *data) |
| { |
| acpi_status status; |
| |
| status = acpi_attach_data(handle, |
| acpi_bus_private_data_handler, data); |
| if (ACPI_FAILURE(status)) { |
| acpi_handle_debug(handle, "Error attaching device data\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(acpi_bus_attach_private_data); |
| |
| int acpi_bus_get_private_data(acpi_handle handle, void **data) |
| { |
| acpi_status status; |
| |
| if (!data) |
| return -EINVAL; |
| |
| status = acpi_get_data(handle, acpi_bus_private_data_handler, data); |
| if (ACPI_FAILURE(status)) { |
| acpi_handle_debug(handle, "No context for object\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(acpi_bus_get_private_data); |
| |
| void acpi_bus_detach_private_data(acpi_handle handle) |
| { |
| acpi_detach_data(handle, acpi_bus_private_data_handler); |
| } |
| EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); |
| |
| static void acpi_print_osc_error(acpi_handle handle, |
| struct acpi_osc_context *context, char *error) |
| { |
| int i; |
| |
| acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error); |
| |
| pr_debug("_OSC request data:"); |
| for (i = 0; i < context->cap.length; i += sizeof(u32)) |
| pr_debug(" %x", *((u32 *)(context->cap.pointer + i))); |
| |
| pr_debug("\n"); |
| } |
| |
| acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) |
| { |
| acpi_status status; |
| struct acpi_object_list input; |
| union acpi_object in_params[4]; |
| union acpi_object *out_obj; |
| guid_t guid; |
| u32 errors; |
| struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; |
| |
| if (!context) |
| return AE_ERROR; |
| if (guid_parse(context->uuid_str, &guid)) |
| return AE_ERROR; |
| context->ret.length = ACPI_ALLOCATE_BUFFER; |
| context->ret.pointer = NULL; |
| |
| /* Setting up input parameters */ |
| input.count = 4; |
| input.pointer = in_params; |
| in_params[0].type = ACPI_TYPE_BUFFER; |
| in_params[0].buffer.length = 16; |
| in_params[0].buffer.pointer = (u8 *)&guid; |
| in_params[1].type = ACPI_TYPE_INTEGER; |
| in_params[1].integer.value = context->rev; |
| in_params[2].type = ACPI_TYPE_INTEGER; |
| in_params[2].integer.value = context->cap.length/sizeof(u32); |
| in_params[3].type = ACPI_TYPE_BUFFER; |
| in_params[3].buffer.length = context->cap.length; |
| in_params[3].buffer.pointer = context->cap.pointer; |
| |
| status = acpi_evaluate_object(handle, "_OSC", &input, &output); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| if (!output.length) |
| return AE_NULL_OBJECT; |
| |
| out_obj = output.pointer; |
| if (out_obj->type != ACPI_TYPE_BUFFER |
| || out_obj->buffer.length != context->cap.length) { |
| acpi_print_osc_error(handle, context, |
| "_OSC evaluation returned wrong type"); |
| status = AE_TYPE; |
| goto out_kfree; |
| } |
| /* Need to ignore the bit0 in result code */ |
| errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); |
| if (errors) { |
| if (errors & OSC_REQUEST_ERROR) |
| acpi_print_osc_error(handle, context, |
| "_OSC request failed"); |
| if (errors & OSC_INVALID_UUID_ERROR) |
| acpi_print_osc_error(handle, context, |
| "_OSC invalid UUID"); |
| if (errors & OSC_INVALID_REVISION_ERROR) |
| acpi_print_osc_error(handle, context, |
| "_OSC invalid revision"); |
| if (errors & OSC_CAPABILITIES_MASK_ERROR) { |
| if (((u32 *)context->cap.pointer)[OSC_QUERY_DWORD] |
| & OSC_QUERY_ENABLE) |
| goto out_success; |
| status = AE_SUPPORT; |
| goto out_kfree; |
| } |
| status = AE_ERROR; |
| goto out_kfree; |
| } |
| out_success: |
| context->ret.length = out_obj->buffer.length; |
| context->ret.pointer = kmemdup(out_obj->buffer.pointer, |
| context->ret.length, GFP_KERNEL); |
| if (!context->ret.pointer) { |
| status = AE_NO_MEMORY; |
| goto out_kfree; |
| } |
| status = AE_OK; |
| |
| out_kfree: |
| kfree(output.pointer); |
| return status; |
| } |
| EXPORT_SYMBOL(acpi_run_osc); |
| |
| bool osc_sb_apei_support_acked; |
| |
| /* |
| * ACPI 6.0 Section 8.4.4.2 Idle State Coordination |
| * OSPM supports platform coordinated low power idle(LPI) states |
| */ |
| bool osc_pc_lpi_support_confirmed; |
| EXPORT_SYMBOL_GPL(osc_pc_lpi_support_confirmed); |
| |
| /* |
| * ACPI 6.2 Section 6.2.11.2 'Platform-Wide OSPM Capabilities': |
| * Starting with ACPI Specification 6.2, all _CPC registers can be in |
| * PCC, System Memory, System IO, or Functional Fixed Hardware address |
| * spaces. OSPM support for this more flexible register space scheme is |
| * indicated by the “Flexible Address Space for CPPC Registers” _OSC bit. |
| * |
| * Otherwise (cf ACPI 6.1, s8.4.7.1.1.X), _CPC registers must be in: |
| * - PCC or Functional Fixed Hardware address space if defined |
| * - SystemMemory address space (NULL register) if not defined |
| */ |
| bool osc_cpc_flexible_adr_space_confirmed; |
| EXPORT_SYMBOL_GPL(osc_cpc_flexible_adr_space_confirmed); |
| |
| /* |
| * ACPI 6.4 Operating System Capabilities for USB. |
| */ |
| bool osc_sb_native_usb4_support_confirmed; |
| EXPORT_SYMBOL_GPL(osc_sb_native_usb4_support_confirmed); |
| |
| bool osc_sb_cppc2_support_acked; |
| |
| static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"; |
| static void acpi_bus_osc_negotiate_platform_control(void) |
| { |
| u32 capbuf[2], *capbuf_ret; |
| struct acpi_osc_context context = { |
| .uuid_str = sb_uuid_str, |
| .rev = 1, |
| .cap.length = 8, |
| .cap.pointer = capbuf, |
| }; |
| acpi_handle handle; |
| |
| capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE; |
| capbuf[OSC_SUPPORT_DWORD] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ |
| if (IS_ENABLED(CONFIG_ACPI_PROCESSOR_AGGREGATOR)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PAD_SUPPORT; |
| if (IS_ENABLED(CONFIG_ACPI_PROCESSOR)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT; |
| if (IS_ENABLED(CONFIG_ACPI_THERMAL)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_FAST_THERMAL_SAMPLING_SUPPORT; |
| if (IS_ENABLED(CONFIG_ACPI_BATTERY)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_BATTERY_CHARGE_LIMITING_SUPPORT; |
| |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT; |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT; |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_OVER_16_PSTATES_SUPPORT; |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GED_SUPPORT; |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_IRQ_RESOURCE_SOURCE_SUPPORT; |
| if (IS_ENABLED(CONFIG_ACPI_PRMT)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PRM_SUPPORT; |
| if (IS_ENABLED(CONFIG_ACPI_FFH)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_FFH_OPR_SUPPORT; |
| |
| #ifdef CONFIG_ARM64 |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT; |
| #endif |
| #ifdef CONFIG_X86 |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT; |
| #endif |
| |
| #ifdef CONFIG_ACPI_CPPC_LIB |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_SUPPORT; |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPCV2_SUPPORT; |
| #endif |
| |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_FLEXIBLE_ADR_SPACE; |
| |
| if (IS_ENABLED(CONFIG_SCHED_MC_PRIO)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_DIVERSE_HIGH_SUPPORT; |
| |
| if (IS_ENABLED(CONFIG_USB4)) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_NATIVE_USB4_SUPPORT; |
| |
| if (!ghes_disable) |
| capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT; |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) |
| return; |
| |
| if (ACPI_FAILURE(acpi_run_osc(handle, &context))) |
| return; |
| |
| capbuf_ret = context.ret.pointer; |
| if (context.ret.length <= OSC_SUPPORT_DWORD) { |
| kfree(context.ret.pointer); |
| return; |
| } |
| |
| /* |
| * Now run _OSC again with query flag clear and with the caps |
| * supported by both the OS and the platform. |
| */ |
| capbuf[OSC_QUERY_DWORD] = 0; |
| capbuf[OSC_SUPPORT_DWORD] = capbuf_ret[OSC_SUPPORT_DWORD]; |
| kfree(context.ret.pointer); |
| |
| if (ACPI_FAILURE(acpi_run_osc(handle, &context))) |
| return; |
| |
| capbuf_ret = context.ret.pointer; |
| if (context.ret.length > OSC_SUPPORT_DWORD) { |
| #ifdef CONFIG_ACPI_CPPC_LIB |
| osc_sb_cppc2_support_acked = capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_CPCV2_SUPPORT; |
| #endif |
| |
| osc_sb_apei_support_acked = |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT; |
| osc_pc_lpi_support_confirmed = |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT; |
| osc_sb_native_usb4_support_confirmed = |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT; |
| osc_cpc_flexible_adr_space_confirmed = |
| capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_CPC_FLEXIBLE_ADR_SPACE; |
| } |
| |
| kfree(context.ret.pointer); |
| } |
| |
| /* |
| * Native control of USB4 capabilities. If any of the tunneling bits is |
| * set it means OS is in control and we use software based connection |
| * manager. |
| */ |
| u32 osc_sb_native_usb4_control; |
| EXPORT_SYMBOL_GPL(osc_sb_native_usb4_control); |
| |
| static void acpi_bus_decode_usb_osc(const char *msg, u32 bits) |
| { |
| pr_info("%s USB3%c DisplayPort%c PCIe%c XDomain%c\n", msg, |
| (bits & OSC_USB_USB3_TUNNELING) ? '+' : '-', |
| (bits & OSC_USB_DP_TUNNELING) ? '+' : '-', |
| (bits & OSC_USB_PCIE_TUNNELING) ? '+' : '-', |
| (bits & OSC_USB_XDOMAIN) ? '+' : '-'); |
| } |
| |
| static u8 sb_usb_uuid_str[] = "23A0D13A-26AB-486C-9C5F-0FFA525A575A"; |
| static void acpi_bus_osc_negotiate_usb_control(void) |
| { |
| u32 capbuf[3], *capbuf_ret; |
| struct acpi_osc_context context = { |
| .uuid_str = sb_usb_uuid_str, |
| .rev = 1, |
| .cap.length = sizeof(capbuf), |
| .cap.pointer = capbuf, |
| }; |
| acpi_handle handle; |
| acpi_status status; |
| u32 control; |
| |
| if (!osc_sb_native_usb4_support_confirmed) |
| return; |
| |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) |
| return; |
| |
| control = OSC_USB_USB3_TUNNELING | OSC_USB_DP_TUNNELING | |
| OSC_USB_PCIE_TUNNELING | OSC_USB_XDOMAIN; |
| |
| /* |
| * Run _OSC first with query bit set, trying to get control over |
| * all tunneling. The platform can then clear out bits in the |
| * control dword that it does not want to grant to the OS. |
| */ |
| capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE; |
| capbuf[OSC_SUPPORT_DWORD] = 0; |
| capbuf[OSC_CONTROL_DWORD] = control; |
| |
| status = acpi_run_osc(handle, &context); |
| if (ACPI_FAILURE(status)) |
| return; |
| |
| if (context.ret.length != sizeof(capbuf)) { |
| pr_info("USB4 _OSC: returned invalid length buffer\n"); |
| goto out_free; |
| } |
| |
| /* |
| * Run _OSC again now with query bit clear and the control dword |
| * matching what the platform granted (which may not have all |
| * the control bits set). |
| */ |
| capbuf_ret = context.ret.pointer; |
| |
| capbuf[OSC_QUERY_DWORD] = 0; |
| capbuf[OSC_CONTROL_DWORD] = capbuf_ret[OSC_CONTROL_DWORD]; |
| |
| kfree(context.ret.pointer); |
| |
| status = acpi_run_osc(handle, &context); |
| if (ACPI_FAILURE(status)) |
| return; |
| |
| if (context.ret.length != sizeof(capbuf)) { |
| pr_info("USB4 _OSC: returned invalid length buffer\n"); |
| goto out_free; |
| } |
| |
| osc_sb_native_usb4_control = |
| control & acpi_osc_ctx_get_pci_control(&context); |
| |
| acpi_bus_decode_usb_osc("USB4 _OSC: OS supports", control); |
| acpi_bus_decode_usb_osc("USB4 _OSC: OS controls", |
| osc_sb_native_usb4_control); |
| |
| out_free: |
| kfree(context.ret.pointer); |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Notification Handling |
| -------------------------------------------------------------------------- */ |
| |
| /** |
| * acpi_bus_notify - Global system-level (0x00-0x7F) notifications handler |
| * @handle: Target ACPI object. |
| * @type: Notification type. |
| * @data: Ignored. |
| * |
| * This only handles notifications related to device hotplug. |
| */ |
| static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) |
| { |
| struct acpi_device *adev; |
| |
| switch (type) { |
| case ACPI_NOTIFY_BUS_CHECK: |
| acpi_handle_debug(handle, "ACPI_NOTIFY_BUS_CHECK event\n"); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_CHECK: |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK event\n"); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_WAKE: |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_WAKE event\n"); |
| return; |
| |
| case ACPI_NOTIFY_EJECT_REQUEST: |
| acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n"); |
| break; |
| |
| case ACPI_NOTIFY_DEVICE_CHECK_LIGHT: |
| acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n"); |
| /* TBD: Exactly what does 'light' mean? */ |
| return; |
| |
| case ACPI_NOTIFY_FREQUENCY_MISMATCH: |
| acpi_handle_err(handle, "Device cannot be configured due " |
| "to a frequency mismatch\n"); |
| return; |
| |
| case ACPI_NOTIFY_BUS_MODE_MISMATCH: |
| acpi_handle_err(handle, "Device cannot be configured due " |
| "to a bus mode mismatch\n"); |
| return; |
| |
| case ACPI_NOTIFY_POWER_FAULT: |
| acpi_handle_err(handle, "Device has suffered a power fault\n"); |
| return; |
| |
| default: |
| acpi_handle_debug(handle, "Unknown event type 0x%x\n", type); |
| return; |
| } |
| |
| adev = acpi_get_acpi_dev(handle); |
| |
| if (adev && ACPI_SUCCESS(acpi_hotplug_schedule(adev, type))) |
| return; |
| |
| acpi_put_acpi_dev(adev); |
| |
| acpi_evaluate_ost(handle, type, ACPI_OST_SC_NON_SPECIFIC_FAILURE, NULL); |
| } |
| |
| static void acpi_notify_device(acpi_handle handle, u32 event, void *data) |
| { |
| struct acpi_device *device = data; |
| struct acpi_driver *acpi_drv = to_acpi_driver(device->dev.driver); |
| |
| acpi_drv->ops.notify(device, event); |
| } |
| |
| static int acpi_device_install_notify_handler(struct acpi_device *device, |
| struct acpi_driver *acpi_drv) |
| { |
| u32 type = acpi_drv->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS ? |
| ACPI_ALL_NOTIFY : ACPI_DEVICE_NOTIFY; |
| acpi_status status; |
| |
| status = acpi_install_notify_handler(device->handle, type, |
| acpi_notify_device, device); |
| if (ACPI_FAILURE(status)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void acpi_device_remove_notify_handler(struct acpi_device *device, |
| struct acpi_driver *acpi_drv) |
| { |
| u32 type = acpi_drv->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS ? |
| ACPI_ALL_NOTIFY : ACPI_DEVICE_NOTIFY; |
| |
| acpi_remove_notify_handler(device->handle, type, |
| acpi_notify_device); |
| |
| acpi_os_wait_events_complete(); |
| } |
| |
| int acpi_dev_install_notify_handler(struct acpi_device *adev, |
| u32 handler_type, |
| acpi_notify_handler handler, void *context) |
| { |
| acpi_status status; |
| |
| status = acpi_install_notify_handler(adev->handle, handler_type, |
| handler, context); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_install_notify_handler); |
| |
| void acpi_dev_remove_notify_handler(struct acpi_device *adev, |
| u32 handler_type, |
| acpi_notify_handler handler) |
| { |
| acpi_remove_notify_handler(adev->handle, handler_type, handler); |
| acpi_os_wait_events_complete(); |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_remove_notify_handler); |
| |
| /* Handle events targeting \_SB device (at present only graceful shutdown) */ |
| |
| #define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81 |
| #define ACPI_SB_INDICATE_INTERVAL 10000 |
| |
| static void sb_notify_work(struct work_struct *dummy) |
| { |
| acpi_handle sb_handle; |
| |
| orderly_poweroff(true); |
| |
| /* |
| * After initiating graceful shutdown, the ACPI spec requires OSPM |
| * to evaluate _OST method once every 10seconds to indicate that |
| * the shutdown is in progress |
| */ |
| acpi_get_handle(NULL, "\\_SB", &sb_handle); |
| while (1) { |
| pr_info("Graceful shutdown in progress.\n"); |
| acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN, |
| ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL); |
| msleep(ACPI_SB_INDICATE_INTERVAL); |
| } |
| } |
| |
| static void acpi_sb_notify(acpi_handle handle, u32 event, void *data) |
| { |
| static DECLARE_WORK(acpi_sb_work, sb_notify_work); |
| |
| if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) { |
| if (!work_busy(&acpi_sb_work)) |
| schedule_work(&acpi_sb_work); |
| } else { |
| pr_warn("event %x is not supported by \\_SB device\n", event); |
| } |
| } |
| |
| static int __init acpi_setup_sb_notify_handler(void) |
| { |
| acpi_handle sb_handle; |
| |
| if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle))) |
| return -ENXIO; |
| |
| if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY, |
| acpi_sb_notify, NULL))) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Device Matching |
| -------------------------------------------------------------------------- */ |
| |
| /** |
| * acpi_get_first_physical_node - Get first physical node of an ACPI device |
| * @adev: ACPI device in question |
| * |
| * Return: First physical node of ACPI device @adev |
| */ |
| struct device *acpi_get_first_physical_node(struct acpi_device *adev) |
| { |
| struct mutex *physical_node_lock = &adev->physical_node_lock; |
| struct device *phys_dev; |
| |
| mutex_lock(physical_node_lock); |
| if (list_empty(&adev->physical_node_list)) { |
| phys_dev = NULL; |
| } else { |
| const struct acpi_device_physical_node *node; |
| |
| node = list_first_entry(&adev->physical_node_list, |
| struct acpi_device_physical_node, node); |
| |
| phys_dev = node->dev; |
| } |
| mutex_unlock(physical_node_lock); |
| return phys_dev; |
| } |
| EXPORT_SYMBOL_GPL(acpi_get_first_physical_node); |
| |
| static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, |
| const struct device *dev) |
| { |
| const struct device *phys_dev = acpi_get_first_physical_node(adev); |
| |
| return phys_dev && phys_dev == dev ? adev : NULL; |
| } |
| |
| /** |
| * acpi_device_is_first_physical_node - Is given dev first physical node |
| * @adev: ACPI companion device |
| * @dev: Physical device to check |
| * |
| * Function checks if given @dev is the first physical devices attached to |
| * the ACPI companion device. This distinction is needed in some cases |
| * where the same companion device is shared between many physical devices. |
| * |
| * Note that the caller have to provide valid @adev pointer. |
| */ |
| bool acpi_device_is_first_physical_node(struct acpi_device *adev, |
| const struct device *dev) |
| { |
| return !!acpi_primary_dev_companion(adev, dev); |
| } |
| |
| /* |
| * acpi_companion_match() - Can we match via ACPI companion device |
| * @dev: Device in question |
| * |
| * Check if the given device has an ACPI companion and if that companion has |
| * a valid list of PNP IDs, and if the device is the first (primary) physical |
| * device associated with it. Return the companion pointer if that's the case |
| * or NULL otherwise. |
| * |
| * If multiple physical devices are attached to a single ACPI companion, we need |
| * to be careful. The usage scenario for this kind of relationship is that all |
| * of the physical devices in question use resources provided by the ACPI |
| * companion. A typical case is an MFD device where all the sub-devices share |
| * the parent's ACPI companion. In such cases we can only allow the primary |
| * (first) physical device to be matched with the help of the companion's PNP |
| * IDs. |
| * |
| * Additional physical devices sharing the ACPI companion can still use |
| * resources available from it but they will be matched normally using functions |
| * provided by their bus types (and analogously for their modalias). |
| */ |
| const struct acpi_device *acpi_companion_match(const struct device *dev) |
| { |
| struct acpi_device *adev; |
| |
| adev = ACPI_COMPANION(dev); |
| if (!adev) |
| return NULL; |
| |
| if (list_empty(&adev->pnp.ids)) |
| return NULL; |
| |
| return acpi_primary_dev_companion(adev, dev); |
| } |
| |
| /** |
| * acpi_of_match_device - Match device object using the "compatible" property. |
| * @adev: ACPI device object to match. |
| * @of_match_table: List of device IDs to match against. |
| * @of_id: OF ID if matched |
| * |
| * If @dev has an ACPI companion which has ACPI_DT_NAMESPACE_HID in its list of |
| * identifiers and a _DSD object with the "compatible" property, use that |
| * property to match against the given list of identifiers. |
| */ |
| static bool acpi_of_match_device(const struct acpi_device *adev, |
| const struct of_device_id *of_match_table, |
| const struct of_device_id **of_id) |
| { |
| const union acpi_object *of_compatible, *obj; |
| int i, nval; |
| |
| if (!adev) |
| return false; |
| |
| of_compatible = adev->data.of_compatible; |
| if (!of_match_table || !of_compatible) |
| return false; |
| |
| if (of_compatible->type == ACPI_TYPE_PACKAGE) { |
| nval = of_compatible->package.count; |
| obj = of_compatible->package.elements; |
| } else { /* Must be ACPI_TYPE_STRING. */ |
| nval = 1; |
| obj = of_compatible; |
| } |
| /* Now we can look for the driver DT compatible strings */ |
| for (i = 0; i < nval; i++, obj++) { |
| const struct of_device_id *id; |
| |
| for (id = of_match_table; id->compatible[0]; id++) |
| if (!strcasecmp(obj->string.pointer, id->compatible)) { |
| if (of_id) |
| *of_id = id; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool acpi_of_modalias(struct acpi_device *adev, |
| char *modalias, size_t len) |
| { |
| const union acpi_object *of_compatible; |
| const union acpi_object *obj; |
| const char *str, *chr; |
| |
| of_compatible = adev->data.of_compatible; |
| if (!of_compatible) |
| return false; |
| |
| if (of_compatible->type == ACPI_TYPE_PACKAGE) |
| obj = of_compatible->package.elements; |
| else /* Must be ACPI_TYPE_STRING. */ |
| obj = of_compatible; |
| |
| str = obj->string.pointer; |
| chr = strchr(str, ','); |
| strscpy(modalias, chr ? chr + 1 : str, len); |
| |
| return true; |
| } |
| |
| /** |
| * acpi_set_modalias - Set modalias using "compatible" property or supplied ID |
| * @adev: ACPI device object to match |
| * @default_id: ID string to use as default if no compatible string found |
| * @modalias: Pointer to buffer that modalias value will be copied into |
| * @len: Length of modalias buffer |
| * |
| * This is a counterpart of of_alias_from_compatible() for struct acpi_device |
| * objects. If there is a compatible string for @adev, it will be copied to |
| * @modalias with the vendor prefix stripped; otherwise, @default_id will be |
| * used. |
| */ |
| void acpi_set_modalias(struct acpi_device *adev, const char *default_id, |
| char *modalias, size_t len) |
| { |
| if (!acpi_of_modalias(adev, modalias, len)) |
| strscpy(modalias, default_id, len); |
| } |
| EXPORT_SYMBOL_GPL(acpi_set_modalias); |
| |
| static bool __acpi_match_device_cls(const struct acpi_device_id *id, |
| struct acpi_hardware_id *hwid) |
| { |
| int i, msk, byte_shift; |
| char buf[3]; |
| |
| if (!id->cls) |
| return false; |
| |
| /* Apply class-code bitmask, before checking each class-code byte */ |
| for (i = 1; i <= 3; i++) { |
| byte_shift = 8 * (3 - i); |
| msk = (id->cls_msk >> byte_shift) & 0xFF; |
| if (!msk) |
| continue; |
| |
| sprintf(buf, "%02x", (id->cls >> byte_shift) & msk); |
| if (strncmp(buf, &hwid->id[(i - 1) * 2], 2)) |
| return false; |
| } |
| return true; |
| } |
| |
| static bool __acpi_match_device(const struct acpi_device *device, |
| const struct acpi_device_id *acpi_ids, |
| const struct of_device_id *of_ids, |
| const struct acpi_device_id **acpi_id, |
| const struct of_device_id **of_id) |
| { |
| const struct acpi_device_id *id; |
| struct acpi_hardware_id *hwid; |
| |
| /* |
| * If the device is not present, it is unnecessary to load device |
| * driver for it. |
| */ |
| if (!device || !device->status.present) |
| return false; |
| |
| list_for_each_entry(hwid, &device->pnp.ids, list) { |
| /* First, check the ACPI/PNP IDs provided by the caller. */ |
| if (acpi_ids) { |
| for (id = acpi_ids; id->id[0] || id->cls; id++) { |
| if (id->id[0] && !strcmp((char *)id->id, hwid->id)) |
| goto out_acpi_match; |
| if (id->cls && __acpi_match_device_cls(id, hwid)) |
| goto out_acpi_match; |
| } |
| } |
| |
| /* |
| * Next, check ACPI_DT_NAMESPACE_HID and try to match the |
| * "compatible" property if found. |
| */ |
| if (!strcmp(ACPI_DT_NAMESPACE_HID, hwid->id)) |
| return acpi_of_match_device(device, of_ids, of_id); |
| } |
| return false; |
| |
| out_acpi_match: |
| if (acpi_id) |
| *acpi_id = id; |
| return true; |
| } |
| |
| /** |
| * acpi_match_acpi_device - Match an ACPI device against a given list of ACPI IDs |
| * @ids: Array of struct acpi_device_id objects to match against. |
| * @adev: The ACPI device pointer to match. |
| * |
| * Match the ACPI device @adev against a given list of ACPI IDs @ids. |
| * |
| * Return: |
| * a pointer to the first matching ACPI ID on success or %NULL on failure. |
| */ |
| const struct acpi_device_id *acpi_match_acpi_device(const struct acpi_device_id *ids, |
| const struct acpi_device *adev) |
| { |
| const struct acpi_device_id *id = NULL; |
| |
| __acpi_match_device(adev, ids, NULL, &id, NULL); |
| return id; |
| } |
| EXPORT_SYMBOL_GPL(acpi_match_acpi_device); |
| |
| /** |
| * acpi_match_device - Match a struct device against a given list of ACPI IDs |
| * @ids: Array of struct acpi_device_id object to match against. |
| * @dev: The device structure to match. |
| * |
| * Check if @dev has a valid ACPI handle and if there is a struct acpi_device |
| * object for that handle and use that object to match against a given list of |
| * device IDs. |
| * |
| * Return a pointer to the first matching ID on success or %NULL on failure. |
| */ |
| const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, |
| const struct device *dev) |
| { |
| return acpi_match_acpi_device(ids, acpi_companion_match(dev)); |
| } |
| EXPORT_SYMBOL_GPL(acpi_match_device); |
| |
| static const void *acpi_of_device_get_match_data(const struct device *dev) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| const struct of_device_id *match = NULL; |
| |
| if (!acpi_of_match_device(adev, dev->driver->of_match_table, &match)) |
| return NULL; |
| |
| return match->data; |
| } |
| |
| const void *acpi_device_get_match_data(const struct device *dev) |
| { |
| const struct acpi_device_id *acpi_ids = dev->driver->acpi_match_table; |
| const struct acpi_device_id *match; |
| |
| if (!acpi_ids) |
| return acpi_of_device_get_match_data(dev); |
| |
| match = acpi_match_device(acpi_ids, dev); |
| if (!match) |
| return NULL; |
| |
| return (const void *)match->driver_data; |
| } |
| EXPORT_SYMBOL_GPL(acpi_device_get_match_data); |
| |
| int acpi_match_device_ids(struct acpi_device *device, |
| const struct acpi_device_id *ids) |
| { |
| return __acpi_match_device(device, ids, NULL, NULL, NULL) ? 0 : -ENOENT; |
| } |
| EXPORT_SYMBOL(acpi_match_device_ids); |
| |
| bool acpi_driver_match_device(struct device *dev, |
| const struct device_driver *drv) |
| { |
| const struct acpi_device_id *acpi_ids = drv->acpi_match_table; |
| const struct of_device_id *of_ids = drv->of_match_table; |
| |
| if (!acpi_ids) |
| return acpi_of_match_device(ACPI_COMPANION(dev), of_ids, NULL); |
| |
| return __acpi_match_device(acpi_companion_match(dev), acpi_ids, of_ids, NULL, NULL); |
| } |
| EXPORT_SYMBOL_GPL(acpi_driver_match_device); |
| |
| /* -------------------------------------------------------------------------- |
| ACPI Driver Management |
| -------------------------------------------------------------------------- */ |
| |
| /** |
| * __acpi_bus_register_driver - register a driver with the ACPI bus |
| * @driver: driver being registered |
| * @owner: owning module/driver |
| * |
| * Registers a driver with the ACPI bus. Searches the namespace for all |
| * devices that match the driver's criteria and binds. Returns zero for |
| * success or a negative error status for failure. |
| */ |
| int __acpi_bus_register_driver(struct acpi_driver *driver, struct module *owner) |
| { |
| if (acpi_disabled) |
| return -ENODEV; |
| driver->drv.name = driver->name; |
| driver->drv.bus = &acpi_bus_type; |
| driver->drv.owner = owner; |
| |
| return driver_register(&driver->drv); |
| } |
| |
| EXPORT_SYMBOL(__acpi_bus_register_driver); |
| |
| /** |
| * acpi_bus_unregister_driver - unregisters a driver with the ACPI bus |
| * @driver: driver to unregister |
| * |
| * Unregisters a driver with the ACPI bus. Searches the namespace for all |
| * devices that match the driver's criteria and unbinds. |
| */ |
| void acpi_bus_unregister_driver(struct acpi_driver *driver) |
| { |
| driver_unregister(&driver->drv); |
| } |
| |
| EXPORT_SYMBOL(acpi_bus_unregister_driver); |
| |
| /* -------------------------------------------------------------------------- |
| ACPI Bus operations |
| -------------------------------------------------------------------------- */ |
| |
| static int acpi_bus_match(struct device *dev, const struct device_driver *drv) |
| { |
| struct acpi_device *acpi_dev = to_acpi_device(dev); |
| const struct acpi_driver *acpi_drv = to_acpi_driver(drv); |
| |
| return acpi_dev->flags.match_driver |
| && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); |
| } |
| |
| static int acpi_device_uevent(const struct device *dev, struct kobj_uevent_env *env) |
| { |
| return __acpi_device_uevent_modalias(to_acpi_device(dev), env); |
| } |
| |
| static int acpi_device_probe(struct device *dev) |
| { |
| struct acpi_device *acpi_dev = to_acpi_device(dev); |
| struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); |
| int ret; |
| |
| if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev)) |
| return -EINVAL; |
| |
| if (!acpi_drv->ops.add) |
| return -ENOSYS; |
| |
| ret = acpi_drv->ops.add(acpi_dev); |
| if (ret) { |
| acpi_dev->driver_data = NULL; |
| return ret; |
| } |
| |
| pr_debug("Driver [%s] successfully bound to device [%s]\n", |
| acpi_drv->name, acpi_dev->pnp.bus_id); |
| |
| if (acpi_drv->ops.notify) { |
| ret = acpi_device_install_notify_handler(acpi_dev, acpi_drv); |
| if (ret) { |
| if (acpi_drv->ops.remove) |
| acpi_drv->ops.remove(acpi_dev); |
| |
| acpi_dev->driver_data = NULL; |
| return ret; |
| } |
| } |
| |
| pr_debug("Found driver [%s] for device [%s]\n", acpi_drv->name, |
| acpi_dev->pnp.bus_id); |
| |
| get_device(dev); |
| return 0; |
| } |
| |
| static void acpi_device_remove(struct device *dev) |
| { |
| struct acpi_device *acpi_dev = to_acpi_device(dev); |
| struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); |
| |
| if (acpi_drv->ops.notify) |
| acpi_device_remove_notify_handler(acpi_dev, acpi_drv); |
| |
| if (acpi_drv->ops.remove) |
| acpi_drv->ops.remove(acpi_dev); |
| |
| acpi_dev->driver_data = NULL; |
| |
| put_device(dev); |
| } |
| |
| const struct bus_type acpi_bus_type = { |
| .name = "acpi", |
| .match = acpi_bus_match, |
| .probe = acpi_device_probe, |
| .remove = acpi_device_remove, |
| .uevent = acpi_device_uevent, |
| }; |
| |
| int acpi_bus_for_each_dev(int (*fn)(struct device *, void *), void *data) |
| { |
| return bus_for_each_dev(&acpi_bus_type, NULL, data, fn); |
| } |
| EXPORT_SYMBOL_GPL(acpi_bus_for_each_dev); |
| |
| struct acpi_dev_walk_context { |
| int (*fn)(struct acpi_device *, void *); |
| void *data; |
| }; |
| |
| static int acpi_dev_for_one_check(struct device *dev, void *context) |
| { |
| struct acpi_dev_walk_context *adwc = context; |
| |
| if (dev->bus != &acpi_bus_type) |
| return 0; |
| |
| return adwc->fn(to_acpi_device(dev), adwc->data); |
| } |
| EXPORT_SYMBOL_GPL(acpi_dev_for_each_child); |
| |
| int acpi_dev_for_each_child(struct acpi_device *adev, |
| int (*fn)(struct acpi_device *, void *), void *data) |
| { |
| struct acpi_dev_walk_context adwc = { |
| .fn = fn, |
| .data = data, |
| }; |
| |
| return device_for_each_child(&adev->dev, &adwc, acpi_dev_for_one_check); |
| } |
| |
| int acpi_dev_for_each_child_reverse(struct acpi_device *adev, |
| int (*fn)(struct acpi_device *, void *), |
| void *data) |
| { |
| struct acpi_dev_walk_context adwc = { |
| .fn = fn, |
| .data = data, |
| }; |
| |
| return device_for_each_child_reverse(&adev->dev, &adwc, acpi_dev_for_one_check); |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Initialization/Cleanup |
| -------------------------------------------------------------------------- */ |
| |
| static int __init acpi_bus_init_irq(void) |
| { |
| acpi_status status; |
| char *message = NULL; |
| |
| |
| /* |
| * Let the system know what interrupt model we are using by |
| * evaluating the \_PIC object, if exists. |
| */ |
| |
| switch (acpi_irq_model) { |
| case ACPI_IRQ_MODEL_PIC: |
| message = "PIC"; |
| break; |
| case ACPI_IRQ_MODEL_IOAPIC: |
| message = "IOAPIC"; |
| break; |
| case ACPI_IRQ_MODEL_IOSAPIC: |
| message = "IOSAPIC"; |
| break; |
| case ACPI_IRQ_MODEL_GIC: |
| message = "GIC"; |
| break; |
| case ACPI_IRQ_MODEL_PLATFORM: |
| message = "platform specific model"; |
| break; |
| case ACPI_IRQ_MODEL_LPIC: |
| message = "LPIC"; |
| break; |
| case ACPI_IRQ_MODEL_RINTC: |
| message = "RINTC"; |
| break; |
| default: |
| pr_info("Unknown interrupt routing model\n"); |
| return -ENODEV; |
| } |
| |
| pr_info("Using %s for interrupt routing\n", message); |
| |
| status = acpi_execute_simple_method(NULL, "\\_PIC", acpi_irq_model); |
| if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { |
| pr_info("_PIC evaluation failed: %s\n", acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * acpi_early_init - Initialize ACPICA and populate the ACPI namespace. |
| * |
| * The ACPI tables are accessible after this, but the handling of events has not |
| * been initialized and the global lock is not available yet, so AML should not |
| * be executed at this point. |
| * |
| * Doing this before switching the EFI runtime services to virtual mode allows |
| * the EfiBootServices memory to be freed slightly earlier on boot. |
| */ |
| void __init acpi_early_init(void) |
| { |
| acpi_status status; |
| |
| if (acpi_disabled) |
| return; |
| |
| pr_info("Core revision %08x\n", ACPI_CA_VERSION); |
| |
| /* enable workarounds, unless strict ACPI spec. compliance */ |
| if (!acpi_strict) |
| acpi_gbl_enable_interpreter_slack = TRUE; |
| |
| acpi_permanent_mmap = true; |
| |
| #ifdef CONFIG_X86 |
| /* |
| * If the machine falls into the DMI check table, |
| * DSDT will be copied to memory. |
| * Note that calling dmi_check_system() here on other architectures |
| * would not be OK because only x86 initializes dmi early enough. |
| * Thankfully only x86 systems need such quirks for now. |
| */ |
| dmi_check_system(dsdt_dmi_table); |
| #endif |
| |
| status = acpi_reallocate_root_table(); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to reallocate ACPI tables\n"); |
| goto error0; |
| } |
| |
| status = acpi_initialize_subsystem(); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to initialize the ACPI Interpreter\n"); |
| goto error0; |
| } |
| |
| #ifdef CONFIG_X86 |
| if (!acpi_ioapic) { |
| /* compatible (0) means level (3) */ |
| if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) { |
| acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK; |
| acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL; |
| } |
| /* Set PIC-mode SCI trigger type */ |
| acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt, |
| (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2); |
| } else { |
| /* |
| * now that acpi_gbl_FADT is initialized, |
| * update it with result from INT_SRC_OVR parsing |
| */ |
| acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi; |
| } |
| #endif |
| return; |
| |
| error0: |
| disable_acpi(); |
| } |
| |
| /** |
| * acpi_subsystem_init - Finalize the early initialization of ACPI. |
| * |
| * Switch over the platform to the ACPI mode (if possible). |
| * |
| * Doing this too early is generally unsafe, but at the same time it needs to be |
| * done before all things that really depend on ACPI. The right spot appears to |
| * be before finalizing the EFI initialization. |
| */ |
| void __init acpi_subsystem_init(void) |
| { |
| acpi_status status; |
| |
| if (acpi_disabled) |
| return; |
| |
| status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to enable ACPI\n"); |
| disable_acpi(); |
| } else { |
| /* |
| * If the system is using ACPI then we can be reasonably |
| * confident that any regulators are managed by the firmware |
| * so tell the regulator core it has everything it needs to |
| * know. |
| */ |
| regulator_has_full_constraints(); |
| } |
| } |
| |
| static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context) |
| { |
| if (event == ACPI_TABLE_EVENT_LOAD) |
| acpi_scan_table_notify(); |
| |
| return acpi_sysfs_table_handler(event, table, context); |
| } |
| |
| static int __init acpi_bus_init(void) |
| { |
| int result; |
| acpi_status status; |
| |
| acpi_os_initialize1(); |
| |
| status = acpi_load_tables(); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to load the System Description Tables\n"); |
| goto error1; |
| } |
| |
| /* |
| * ACPI 2.0 requires the EC driver to be loaded and work before the EC |
| * device is found in the namespace. |
| * |
| * This is accomplished by looking for the ECDT table and getting the EC |
| * parameters out of that. |
| * |
| * Do that before calling acpi_initialize_objects() which may trigger EC |
| * address space accesses. |
| */ |
| acpi_ec_ecdt_probe(); |
| |
| status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to start the ACPI Interpreter\n"); |
| goto error1; |
| } |
| |
| status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to initialize ACPI objects\n"); |
| goto error1; |
| } |
| |
| /* |
| * _OSC method may exist in module level code, |
| * so it must be run after ACPI_FULL_INITIALIZATION |
| */ |
| acpi_bus_osc_negotiate_platform_control(); |
| acpi_bus_osc_negotiate_usb_control(); |
| |
| /* |
| * _PDC control method may load dynamic SSDT tables, |
| * and we need to install the table handler before that. |
| */ |
| status = acpi_install_table_handler(acpi_bus_table_handler, NULL); |
| |
| acpi_sysfs_init(); |
| |
| acpi_early_processor_control_setup(); |
| |
| /* |
| * Maybe EC region is required at bus_scan/acpi_get_devices. So it |
| * is necessary to enable it as early as possible. |
| */ |
| acpi_ec_dsdt_probe(); |
| |
| pr_info("Interpreter enabled\n"); |
| |
| /* Initialize sleep structures */ |
| acpi_sleep_init(); |
| |
| /* |
| * Get the system interrupt model and evaluate \_PIC. |
| */ |
| result = acpi_bus_init_irq(); |
| if (result) |
| goto error1; |
| |
| /* |
| * Register the for all standard device notifications. |
| */ |
| status = |
| acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY, |
| &acpi_bus_notify, NULL); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to register for system notifications\n"); |
| goto error1; |
| } |
| |
| /* |
| * Create the top ACPI proc directory |
| */ |
| acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL); |
| |
| result = bus_register(&acpi_bus_type); |
| if (!result) |
| return 0; |
| |
| /* Mimic structured exception handling */ |
| error1: |
| acpi_terminate(); |
| return -ENODEV; |
| } |
| |
| struct kobject *acpi_kobj; |
| EXPORT_SYMBOL_GPL(acpi_kobj); |
| |
| static int __init acpi_init(void) |
| { |
| int result; |
| |
| if (acpi_disabled) { |
| pr_info("Interpreter disabled.\n"); |
| return -ENODEV; |
| } |
| |
| acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); |
| if (!acpi_kobj) |
| pr_debug("%s: kset create error\n", __func__); |
| |
| init_prmt(); |
| acpi_init_pcc(); |
| result = acpi_bus_init(); |
| if (result) { |
| kobject_put(acpi_kobj); |
| disable_acpi(); |
| return result; |
| } |
| acpi_init_ffh(); |
| |
| pci_mmcfg_late_init(); |
| acpi_viot_early_init(); |
| acpi_hest_init(); |
| acpi_ghes_init(); |
| acpi_arm_init(); |
| acpi_riscv_init(); |
| acpi_scan_init(); |
| acpi_ec_init(); |
| acpi_debugfs_init(); |
| acpi_sleep_proc_init(); |
| acpi_wakeup_device_init(); |
| acpi_debugger_init(); |
| acpi_setup_sb_notify_handler(); |
| acpi_viot_init(); |
| return 0; |
| } |
| |
| subsys_initcall(acpi_init); |