| # SPDX-License-Identifier: GPL-2.0 |
| |
| if LEDS_CLASS_FLASH |
| |
| config LEDS_AAT1290 |
| tristate "LED support for the AAT1290" |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| depends on GPIOLIB || COMPILE_TEST |
| depends on OF |
| depends on PINCTRL |
| help |
| This option enables support for the LEDs on the AAT1290. |
| |
| config LEDS_AS3645A |
| tristate "AS3645A and LM3555 LED flash controllers support" |
| depends on I2C |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| help |
| Enable LED flash class support for AS3645A LED flash |
| controller. V4L2 flash API is provided as well if |
| CONFIG_V4L2_FLASH_API is enabled. |
| |
| config LEDS_KTD2692 |
| tristate "LED support for Kinetic KTD2692 flash LED controller" |
| depends on OF |
| depends on GPIOLIB |
| select LEDS_EXPRESSWIRE |
| help |
| This option enables support for Kinetic KTD2692 LED flash connected |
| through ExpressWire interface. |
| |
| Say Y to enable this driver. |
| |
| config LEDS_LM3601X |
| tristate "LED support for LM3601x Chips" |
| depends on LEDS_CLASS && I2C |
| select REGMAP_I2C |
| help |
| This option enables support for the TI LM3601x family |
| of flash, torch and indicator classes. |
| |
| config LEDS_MAX77693 |
| tristate "LED support for MAX77693 Flash" |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| depends on MFD_MAX77693 |
| depends on OF |
| help |
| This option enables support for the flash part of the MAX77693 |
| multifunction device. It has build in control for two leds in flash |
| and torch mode. |
| |
| config LEDS_MT6360 |
| tristate "LED Support for Mediatek MT6360 PMIC" |
| depends on LEDS_CLASS && OF |
| depends on LEDS_CLASS_FLASH |
| depends on LEDS_CLASS_MULTICOLOR |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| depends on MFD_MT6360 |
| help |
| This option enables support for dual Flash LED drivers found on |
| Mediatek MT6360 PMIC. |
| Independent current sources supply for each flash LED support torch |
| and strobe mode. |
| |
| config LEDS_MT6370_FLASH |
| tristate "Flash LED Support for MediaTek MT6370 PMIC" |
| depends on LEDS_CLASS |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| depends on MFD_MT6370 |
| help |
| Support 2 channels and torch/strobe mode. |
| Say Y here to enable support for |
| MT6370_FLASH_LED device. |
| |
| This driver can also be built as a module. If so, the module |
| will be called "leds-mt6370-flash". |
| |
| config LEDS_QCOM_FLASH |
| tristate "LED support for flash module inside Qualcomm Technologies, Inc. PMIC" |
| depends on MFD_SPMI_PMIC || COMPILE_TEST |
| depends on LEDS_CLASS && OF |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| select REGMAP |
| help |
| This option enables support for the flash module found in Qualcomm |
| Technologies, Inc. PMICs. The flash module can have 3 or 4 flash LED |
| channels and each channel is programmable to support up to 1.5 A full |
| scale current. It also supports connecting two channels' output together |
| to supply one LED component to achieve current up to 2 A. In such case, |
| the total LED current will be split symmetrically on each channel and |
| they will be enabled/disabled at the same time. |
| |
| This driver can be built as a module, it will be called "leds-qcom-flash". |
| |
| config LEDS_RT4505 |
| tristate "LED support for RT4505 flashlight controller" |
| depends on I2C && OF |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| select REGMAP_I2C |
| help |
| This option enables support for the RT4505 flash LED controller. |
| RT4505 includes torch and flash functions with programmable current. |
| And it's commonly used to compensate the illuminance for the camera |
| inside the mobile product like as phones or tablets. |
| |
| config LEDS_RT8515 |
| tristate "LED support for Richtek RT8515 flash/torch LED" |
| depends on GPIOLIB |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| help |
| This option enables support for the Richtek RT8515 flash |
| and torch LEDs found on some mobile phones. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called leds-rt8515. |
| |
| config LEDS_SGM3140 |
| tristate "LED support for the SGM3140" |
| depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS |
| help |
| This option enables support for the SGM3140 500mA Buck/Boost Charge |
| Pump LED Driver. |
| |
| config LEDS_SY7802 |
| tristate "LED support for the Silergy SY7802" |
| depends on I2C && OF |
| depends on GPIOLIB |
| select REGMAP_I2C |
| help |
| This option enables support for the SY7802 flash LED controller. |
| SY7802 includes torch and flash functions with programmable current. |
| |
| This driver can be built as a module, it will be called "leds-sy7802". |
| |
| endif # LEDS_CLASS_FLASH |
