| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2023 Analog Devices, Inc. |
| * ADI Regulator driver for the MAX77857 |
| * MAX77859 and MAX77831. |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/util_macros.h> |
| |
| #define MAX77857_REG_INT_SRC 0x10 |
| #define MAX77857_REG_INT_MASK 0x11 |
| #define MAX77857_REG_CONT1 0x12 |
| #define MAX77857_REG_CONT2 0x13 |
| #define MAX77857_REG_CONT3 0x14 |
| |
| #define MAX77857_INT_SRC_OCP BIT(0) |
| #define MAX77857_INT_SRC_THS BIT(1) |
| #define MAX77857_INT_SRC_HARDSHORT BIT(2) |
| #define MAX77857_INT_SRC_OVP BIT(3) |
| #define MAX77857_INT_SRC_POK BIT(4) |
| |
| #define MAX77857_ILIM_MASK GENMASK(2, 0) |
| #define MAX77857_CONT1_FREQ GENMASK(4, 3) |
| #define MAX77857_CONT3_FPWM BIT(5) |
| |
| #define MAX77859_REG_INT_SRC 0x11 |
| #define MAX77859_REG_CONT1 0x13 |
| #define MAX77859_REG_CONT2 0x14 |
| #define MAX77859_REG_CONT3 0x15 |
| #define MAX77859_REG_CONT5 0x17 |
| #define MAX77859_CONT2_FPWM BIT(2) |
| #define MAX77859_CONT2_INTB BIT(3) |
| #define MAX77859_CONT3_DVS_START BIT(2) |
| #define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0) |
| |
| #define MAX77859_CURRENT_MIN 1000000 |
| #define MAX77859_CURRENT_MAX 5000000 |
| #define MAX77859_CURRENT_STEP 50000 |
| |
| enum max77857_id { |
| ID_MAX77831 = 1, |
| ID_MAX77857, |
| ID_MAX77859, |
| ID_MAX77859A, |
| }; |
| |
| static bool max77857_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| enum max77857_id id = (uintptr_t)dev_get_drvdata(dev); |
| |
| switch (id) { |
| case ID_MAX77831: |
| case ID_MAX77857: |
| return reg == MAX77857_REG_INT_SRC; |
| case ID_MAX77859: |
| case ID_MAX77859A: |
| return reg == MAX77859_REG_INT_SRC; |
| default: |
| return true; |
| } |
| } |
| |
| static const struct regmap_config max77857_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_MAPLE, |
| .volatile_reg = max77857_volatile_reg, |
| }; |
| |
| static int max77857_get_status(struct regulator_dev *rdev) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(MAX77857_INT_SRC_POK, val)) |
| return REGULATOR_STATUS_ON; |
| |
| return REGULATOR_STATUS_ERROR; |
| } |
| |
| static unsigned int max77857_get_mode(struct regulator_dev *rdev) |
| { |
| enum max77857_id id = (uintptr_t)rdev_get_drvdata(rdev); |
| unsigned int regval; |
| int ret; |
| |
| switch (id) { |
| case ID_MAX77831: |
| case ID_MAX77857: |
| ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3, ®val); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(MAX77857_CONT3_FPWM, regval)) |
| return REGULATOR_MODE_FAST; |
| |
| break; |
| case ID_MAX77859: |
| case ID_MAX77859A: |
| ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2, ®val); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(MAX77859_CONT2_FPWM, regval)) |
| return REGULATOR_MODE_FAST; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| enum max77857_id id = (uintptr_t)rdev_get_drvdata(rdev); |
| unsigned int reg, val; |
| |
| switch (id) { |
| case ID_MAX77831: |
| case ID_MAX77857: |
| reg = MAX77857_REG_CONT3; |
| val = MAX77857_CONT3_FPWM; |
| break; |
| case ID_MAX77859: |
| case ID_MAX77859A: |
| reg = MAX77859_REG_CONT2; |
| val = MAX77859_CONT2_FPWM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| return regmap_set_bits(rdev->regmap, reg, val); |
| case REGULATOR_MODE_NORMAL: |
| return regmap_clear_bits(rdev->regmap, reg, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max77857_get_error_flags(struct regulator_dev *rdev, |
| unsigned int *flags) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val); |
| if (ret) |
| return ret; |
| |
| *flags = 0; |
| |
| if (FIELD_GET(MAX77857_INT_SRC_OVP, val)) |
| *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN; |
| |
| if (FIELD_GET(MAX77857_INT_SRC_OCP, val) || |
| FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val)) |
| *flags |= REGULATOR_ERROR_OVER_CURRENT; |
| |
| if (FIELD_GET(MAX77857_INT_SRC_THS, val)) |
| *flags |= REGULATOR_ERROR_OVER_TEMP; |
| |
| if (!FIELD_GET(MAX77857_INT_SRC_POK, val)) |
| *flags |= REGULATOR_ERROR_FAIL; |
| |
| return 0; |
| } |
| |
| static struct linear_range max77859_lin_ranges[] = { |
| REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000) |
| }; |
| |
| static const unsigned int max77859_ramp_table[4] = { |
| 1000, 500, 250, 125 |
| }; |
| |
| static int max77859_set_voltage_sel(struct regulator_dev *rdev, |
| unsigned int sel) |
| { |
| __be16 reg; |
| int ret; |
| |
| reg = cpu_to_be16(sel); |
| |
| ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2); |
| if (ret) |
| return ret; |
| |
| /* actually apply new voltage */ |
| return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3, |
| MAX77859_CONT3_DVS_START); |
| } |
| |
| static int max77859_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| __be16 reg; |
| int ret; |
| |
| ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2); |
| if (ret) |
| return ret; |
| |
| return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg)); |
| } |
| |
| static int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA) |
| { |
| u32 selector; |
| |
| if (max_uA < MAX77859_CURRENT_MIN) |
| return -EINVAL; |
| |
| selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) / MAX77859_CURRENT_STEP; |
| |
| selector = clamp_val(selector, 0x00, 0x7F); |
| |
| return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector); |
| } |
| |
| static int max77859_get_current_limit(struct regulator_dev *rdev) |
| { |
| u32 selector; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector); |
| if (ret) |
| return ret; |
| |
| if (selector <= 0x12) |
| return MAX77859_CURRENT_MIN; |
| |
| if (selector >= 0x64) |
| return MAX77859_CURRENT_MAX; |
| |
| return MAX77859_CURRENT_MIN + (selector - 0x12) * MAX77859_CURRENT_STEP; |
| } |
| |
| static const struct regulator_ops max77859_regulator_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .set_voltage_sel = max77859_set_voltage_sel, |
| .get_voltage_sel = max77859_get_voltage_sel, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| .get_status = max77857_get_status, |
| .set_mode = max77857_set_mode, |
| .get_mode = max77857_get_mode, |
| .get_error_flags = max77857_get_error_flags, |
| }; |
| |
| static const struct regulator_ops max77859a_regulator_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .set_voltage_sel = max77859_set_voltage_sel, |
| .get_voltage_sel = max77859_get_voltage_sel, |
| .set_current_limit = max77859_set_current_limit, |
| .get_current_limit = max77859_get_current_limit, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| .get_status = max77857_get_status, |
| .set_mode = max77857_set_mode, |
| .get_mode = max77857_get_mode, |
| .get_error_flags = max77857_get_error_flags, |
| }; |
| |
| static const struct regulator_ops max77857_regulator_ops = { |
| .list_voltage = regulator_list_voltage_linear_range, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| .get_status = max77857_get_status, |
| .set_mode = max77857_set_mode, |
| .get_mode = max77857_get_mode, |
| .get_error_flags = max77857_get_error_flags, |
| }; |
| |
| static struct linear_range max77857_lin_ranges[] = { |
| REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500) |
| }; |
| |
| static const unsigned int max77857_switch_freq[] = { |
| 1200000, 1500000, 1800000, 2100000 |
| }; |
| |
| #define RAMAP_DELAY_INIT_VAL 1333 |
| |
| static const unsigned int max77857_ramp_table[2][4] = { |
| { RAMAP_DELAY_INIT_VAL, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */ |
| { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */ |
| }; |
| |
| static struct regulator_desc max77857_regulator_desc = { |
| .ops = &max77857_regulator_ops, |
| .name = "max77857", |
| .linear_ranges = max77857_lin_ranges, |
| .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges), |
| .vsel_mask = 0xFF, |
| .vsel_reg = MAX77857_REG_CONT2, |
| .ramp_delay_table = max77857_ramp_table[0], |
| .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]), |
| .ramp_reg = MAX77857_REG_CONT3, |
| .ramp_mask = GENMASK(1, 0), |
| .ramp_delay = RAMAP_DELAY_INIT_VAL, |
| .owner = THIS_MODULE, |
| }; |
| |
| static void max77857_calc_range(struct device *dev, enum max77857_id id) |
| { |
| struct linear_range *range; |
| unsigned long vref_step; |
| u32 rtop = 0; |
| u32 rbot = 0; |
| |
| device_property_read_u32(dev, "adi,rtop-ohms", &rtop); |
| device_property_read_u32(dev, "adi,rbot-ohms", &rbot); |
| |
| if (!rbot || !rtop) |
| return; |
| |
| switch (id) { |
| case ID_MAX77831: |
| case ID_MAX77857: |
| range = max77857_lin_ranges; |
| vref_step = 4900UL; |
| break; |
| case ID_MAX77859: |
| case ID_MAX77859A: |
| range = max77859_lin_ranges; |
| vref_step = 1250UL; |
| break; |
| } |
| |
| range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot); |
| range->min = range->step * range->min_sel; |
| } |
| |
| static int max77857_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *i2c_id; |
| struct device *dev = &client->dev; |
| struct regulator_config cfg = { }; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| enum max77857_id id; |
| u32 switch_freq = 0; |
| int ret; |
| |
| i2c_id = i2c_client_get_device_id(client); |
| if (!i2c_id) |
| return -EINVAL; |
| |
| id = i2c_id->driver_data; |
| |
| dev_set_drvdata(dev, (void *)id); |
| |
| if (id == ID_MAX77859 || id == ID_MAX77859A) { |
| max77857_regulator_desc.ops = &max77859_regulator_ops; |
| max77857_regulator_desc.linear_ranges = max77859_lin_ranges; |
| max77857_regulator_desc.ramp_delay_table = max77859_ramp_table; |
| max77857_regulator_desc.ramp_delay = max77859_ramp_table[0]; |
| } |
| |
| if (id == ID_MAX77859A) |
| max77857_regulator_desc.ops = &max77859a_regulator_ops; |
| |
| max77857_calc_range(dev, id); |
| |
| regmap = devm_regmap_init_i2c(client, &max77857_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(dev, PTR_ERR(regmap), |
| "cannot initialize regmap\n"); |
| |
| device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq); |
| if (switch_freq) { |
| switch_freq = find_closest(switch_freq, max77857_switch_freq, |
| ARRAY_SIZE(max77857_switch_freq)); |
| |
| if (id == ID_MAX77831 && switch_freq == 3) |
| switch_freq = 2; |
| |
| switch (id) { |
| case ID_MAX77831: |
| case ID_MAX77857: |
| ret = regmap_update_bits(regmap, MAX77857_REG_CONT1, |
| MAX77857_CONT1_FREQ, switch_freq); |
| |
| if (switch_freq >= 2) |
| break; |
| |
| max77857_regulator_desc.ramp_delay_table = max77857_ramp_table[1]; |
| max77857_regulator_desc.ramp_delay = max77857_ramp_table[1][0]; |
| break; |
| case ID_MAX77859: |
| case ID_MAX77859A: |
| ret = regmap_update_bits(regmap, MAX77859_REG_CONT1, |
| MAX77857_CONT1_FREQ, switch_freq); |
| break; |
| } |
| if (ret) |
| return ret; |
| } |
| |
| cfg.dev = dev; |
| cfg.driver_data = (void *)id; |
| cfg.regmap = regmap; |
| cfg.init_data = of_get_regulator_init_data(dev, dev->of_node, |
| &max77857_regulator_desc); |
| if (!cfg.init_data) |
| return -ENOMEM; |
| |
| rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg); |
| if (IS_ERR(rdev)) |
| return dev_err_probe(dev, PTR_ERR(rdev), |
| "cannot register regulator\n"); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id max77857_id[] = { |
| { "max77831", ID_MAX77831 }, |
| { "max77857", ID_MAX77857 }, |
| { "max77859", ID_MAX77859 }, |
| { "max77859a", ID_MAX77859A }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max77857_id); |
| |
| static const struct of_device_id max77857_of_id[] = { |
| { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 }, |
| { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 }, |
| { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 }, |
| { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, max77857_of_id); |
| |
| static struct i2c_driver max77857_driver = { |
| .driver = { |
| .name = "max77857", |
| .of_match_table = max77857_of_id, |
| }, |
| .id_table = max77857_id, |
| .probe = max77857_probe, |
| }; |
| module_i2c_driver(max77857_driver); |
| |
| MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter Driver"); |
| MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>"); |
| MODULE_AUTHOR("Okan Sahin <Okan.Sahin@analog.com>"); |
| MODULE_LICENSE("GPL"); |