| menuconfig SND_FIREWIRE |
| bool "FireWire sound devices" |
| depends on FIREWIRE |
| default y |
| help |
| Support for IEEE-1394/FireWire/iLink sound devices. |
| |
| if SND_FIREWIRE && FIREWIRE |
| |
| config SND_FIREWIRE_LIB |
| tristate |
| depends on SND_PCM |
| |
| config SND_DICE |
| tristate "DICE-based DACs (EXPERIMENTAL)" |
| select SND_HWDEP |
| select SND_PCM |
| select SND_FIREWIRE_LIB |
| help |
| Say Y here to include support for many DACs based on the DICE |
| chip family (DICE-II/Jr/Mini) from TC Applied Technologies. |
| |
| At the moment, this driver supports playback only. If you |
| want to use devices that support capturing, use FFADO instead. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-dice. |
| |
| config SND_FIREWIRE_SPEAKERS |
| tristate "FireWire speakers" |
| select SND_PCM |
| select SND_FIREWIRE_LIB |
| help |
| Say Y here to include support for the Griffin FireWave Surround |
| and the LaCie FireWire Speakers. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-firewire-speakers. |
| |
| config SND_ISIGHT |
| tristate "Apple iSight microphone" |
| select SND_PCM |
| select SND_FIREWIRE_LIB |
| help |
| Say Y here to include support for the front and rear microphones |
| of the Apple iSight web camera. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-isight. |
| |
| config SND_SCS1X |
| tristate "Stanton Control System 1 MIDI" |
| select SND_PCM |
| select SND_RAWMIDI |
| select SND_FIREWIRE_LIB |
| help |
| Say Y here to include support for the MIDI ports of the Stanton |
| SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled |
| by FFADO.) |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-scs1x. |
| |
| config SND_FIREWORKS |
| tristate "Echo Fireworks board module support" |
| select SND_FIREWIRE_LIB |
| select SND_RAWMIDI |
| select SND_PCM |
| select SND_HWDEP |
| help |
| Say Y here to include support for FireWire devices based |
| on Echo Digital Audio Fireworks board: |
| * Mackie Onyx 400F/1200F |
| * Echo AudioFire12/8(until 2009 July) |
| * Echo AudioFire2/4/Pre8/8(since 2009 July) |
| * Echo Fireworks 8/HDMI |
| * Gibson Robot Interface Pack/GoldTop |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-fireworks. |
| |
| config SND_BEBOB |
| tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware" |
| select SND_FIREWIRE_LIB |
| select SND_RAWMIDI |
| select SND_PCM |
| select SND_HWDEP |
| help |
| Say Y here to include support for FireWire devices based |
| on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware: |
| * Edirol FA-66/FA-101 |
| * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 |
| * BridgeCo RDAudio1/Audio5 |
| * Mackie Onyx 1220/1620/1640 (Firewire I/O Card) |
| * Mackie d.2 (Firewire Option) |
| * Stanton FinalScratch 2 (ScratchAmp) |
| * Tascam IF-FW/DM |
| * Behringer XENIX UFX 1204/1604 |
| * Behringer Digital Mixer X32 series (X-UF Card) |
| * Apogee Rosetta 200/400 (X-FireWire card) |
| * Apogee DA/AD/DD-16X (X-FireWire card) |
| * Apogee Ensemble |
| * ESI Quotafire610 |
| * AcousticReality eARMasterOne |
| * CME MatrixKFW |
| * Phonic Helix Board 12 MkII/18 MkII/24 MkII |
| * Phonic Helix Board 12 Universal/18 Universal/24 Universal |
| * Lynx Aurora 8/16 (LT-FW) |
| * ICON FireXon |
| * PrismSound Orpheus/ADA-8XR |
| * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW |
| * Terratec EWS MIC2/EWS MIC4 |
| * Terratec Aureon 7.1 Firewire |
| * Yamaha GO44/GO46 |
| * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO |
| * M-Audio Firewire410/AudioPhile/Solo |
| * M-Audio Ozonic/NRV10/ProfireLightBridge |
| * M-Audio Firewire 1814/ProjectMix IO |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-bebob. |
| |
| endif # SND_FIREWIRE |
