| Allwinner A10 Display Pipeline |
| ============================== |
| |
| The Allwinner A10 Display pipeline is composed of several components |
| that are going to be documented below: |
| |
| TV Encoder |
| ---------- |
| |
| The TV Encoder supports the composite and VGA output. It is one end of |
| the pipeline. |
| |
| Required properties: |
| - compatible: value should be "allwinner,sun4i-a10-tv-encoder". |
| - reg: base address and size of memory-mapped region |
| - clocks: the clocks driving the TV encoder |
| - resets: phandle to the reset controller driving the encoder |
| |
| - ports: A ports node with endpoint definitions as defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. The |
| first port should be the input endpoint. |
| |
| TCON |
| ---- |
| |
| The TCON acts as a timing controller for RGB, LVDS and TV interfaces. |
| |
| Required properties: |
| - compatible: value should be "allwinner,sun5i-a13-tcon". |
| - reg: base address and size of memory-mapped region |
| - interrupts: interrupt associated to this IP |
| - clocks: phandles to the clocks feeding the TCON. Three are needed: |
| - 'ahb': the interface clocks |
| - 'tcon-ch0': The clock driving the TCON channel 0 |
| - 'tcon-ch1': The clock driving the TCON channel 1 |
| - resets: phandles to the reset controllers driving the encoder |
| - "lcd": the reset line for the TCON channel 0 |
| |
| - clock-names: the clock names mentioned above |
| - reset-names: the reset names mentioned above |
| - clock-output-names: Name of the pixel clock created |
| |
| - ports: A ports node with endpoint definitions as defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. The |
| first port should be the input endpoint, the second one the output |
| |
| The output should have two endpoints. The first is the block |
| connected to the TCON channel 0 (usually a panel or a bridge), the |
| second the block connected to the TCON channel 1 (usually the TV |
| encoder) |
| |
| |
| Display Engine Backend |
| ---------------------- |
| |
| The display engine backend exposes layers and sprites to the |
| system. |
| |
| Required properties: |
| - compatible: value must be one of: |
| * allwinner,sun5i-a13-display-backend |
| - reg: base address and size of the memory-mapped region. |
| - clocks: phandles to the clocks feeding the frontend and backend |
| * ahb: the backend interface clock |
| * mod: the backend module clock |
| * ram: the backend DRAM clock |
| - clock-names: the clock names mentioned above |
| - resets: phandles to the reset controllers driving the backend |
| |
| - ports: A ports node with endpoint definitions as defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. The |
| first port should be the input endpoints, the second one the output |
| |
| Display Engine Frontend |
| ----------------------- |
| |
| The display engine frontend does formats conversion, scaling, |
| deinterlacing and color space conversion. |
| |
| Required properties: |
| - compatible: value must be one of: |
| * allwinner,sun5i-a13-display-frontend |
| - reg: base address and size of the memory-mapped region. |
| - interrupts: interrupt associated to this IP |
| - clocks: phandles to the clocks feeding the frontend and backend |
| * ahb: the backend interface clock |
| * mod: the backend module clock |
| * ram: the backend DRAM clock |
| - clock-names: the clock names mentioned above |
| - resets: phandles to the reset controllers driving the backend |
| |
| - ports: A ports node with endpoint definitions as defined in |
| Documentation/devicetree/bindings/media/video-interfaces.txt. The |
| first port should be the input endpoints, the second one the outputs |
| |
| |
| Display Engine Pipeline |
| ----------------------- |
| |
| The display engine pipeline (and its entry point, since it can be |
| either directly the backend or the frontend) is represented as an |
| extra node. |
| |
| Required properties: |
| - compatible: value must be one of: |
| * allwinner,sun5i-a13-display-engine |
| |
| - allwinner,pipelines: list of phandle to the display engine |
| frontends available. |
| |
| Example: |
| |
| panel: panel { |
| compatible = "olimex,lcd-olinuxino-43-ts"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel_input: endpoint { |
| remote-endpoint = <&tcon0_out_panel>; |
| }; |
| }; |
| }; |
| |
| tve0: tv-encoder@01c0a000 { |
| compatible = "allwinner,sun4i-a10-tv-encoder"; |
| reg = <0x01c0a000 0x1000>; |
| clocks = <&ahb_gates 34>; |
| resets = <&tcon_ch0_clk 0>; |
| |
| port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tve0_in_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_out_tve0>; |
| }; |
| }; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun5i-a13-tcon"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <44>; |
| resets = <&tcon_ch0_clk 1>; |
| reset-names = "lcd"; |
| clocks = <&ahb_gates 36>, |
| <&tcon_ch0_clk>, |
| <&tcon_ch1_clk>; |
| clock-names = "ahb", |
| "tcon-ch0", |
| "tcon-ch1"; |
| clock-output-names = "tcon-pixel-clock"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon0_in_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_panel: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&panel_input>; |
| }; |
| |
| tcon0_out_tve0: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tve0_in_tcon0>; |
| }; |
| }; |
| }; |
| }; |
| |
| fe0: display-frontend@1e00000 { |
| compatible = "allwinner,sun5i-a13-display-frontend"; |
| reg = <0x01e00000 0x20000>; |
| interrupts = <47>; |
| clocks = <&ahb_gates 46>, <&de_fe_clk>, |
| <&dram_gates 25>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&de_fe_clk>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fe0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| fe0_out_be0: endpoint { |
| remote-endpoint = <&be0_in_fe0>; |
| }; |
| }; |
| }; |
| }; |
| |
| be0: display-backend@1e60000 { |
| compatible = "allwinner,sun5i-a13-display-backend"; |
| reg = <0x01e60000 0x10000>; |
| clocks = <&ahb_gates 44>, <&de_be_clk>, |
| <&dram_gates 26>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&de_be_clk>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| be0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| be0_in_fe0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&fe0_out_be0>; |
| }; |
| }; |
| |
| be0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| be0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_be0>; |
| }; |
| }; |
| }; |
| }; |
| |
| display-engine { |
| compatible = "allwinner,sun5i-a13-display-engine"; |
| allwinner,pipelines = <&fe0>; |
| }; |
