drivers/net/wireless/intel/iwlwifi/mvm/time-event.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
  * Copyright (C) 2012-2014, 2019-2020 Intel Corporation
  * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
  */
 #ifndef __time_event_h__
 #define __time_event_h__

 #include "fw-api.h"

 #include "mvm.h"

 /**
  * DOC: Time Events - what is it?
  *
  * Time Events are a fw feature that allows the driver to control the presence
  * of the device on the channel. Since the fw supports multiple channels
  * concurrently, the fw may choose to jump to another channel at any time.
  * In order to make sure that the fw is on a specific channel at a certain time
  * and for a certain duration, the driver needs to issue a time event.
  *
  * The simplest example is for BSS association. The driver issues a time event,
  * waits for it to start, and only then tells mac80211 that we can start the
  * association. This way, we make sure that the association will be done
  * smoothly and won't be interrupted by channel switch decided within the fw.
  */

  /**
  * DOC: The flow against the fw
  *
  * When the driver needs to make sure we are in a certain channel, at a certain
  * time and for a certain duration, it sends a Time Event. The flow against the
  * fw goes like this:
  *	1) Driver sends a TIME_EVENT_CMD to the fw
  *	2) Driver gets the response for that command. This response contains the
  *	   Unique ID (UID) of the event.
  *	3) The fw sends notification when the event starts.
  *
  * Of course the API provides various options that allow to cover parameters
  * of the flow.
  *	What is the duration of the event?
  *	What is the start time of the event?
  *	Is there an end-time for the event?
  *	How much can the event be delayed?
  *	Can the event be split?
  *	If yes what is the maximal number of chunks?
  *	etc...
  */

 /**
  * DOC: Abstraction to the driver
  *
  * In order to simplify the use of time events to the rest of the driver,
  * we abstract the use of time events. This component provides the functions
  * needed by the driver.
  */

 #define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 600
 #define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400

 /**
  * iwl_mvm_protect_session - start / extend the session protection.
  * @mvm: the mvm component
  * @vif: the virtual interface for which the session is issued
  * @duration: the duration of the session in TU.
  * @min_duration: will start a new session if the current session will end
  *	in less than min_duration.
  * @max_delay: maximum delay before starting the time event (in TU)
  * @wait_for_notif: true if it is required that a time event notification be
  *	waited for (that the time event has been scheduled before returning)
  *
  * This function can be used to start a session protection which means that the
  * fw will stay on the channel for %duration_ms milliseconds. This function
  * can block (sleep) until the session starts. This function can also be used
  * to extend a currently running session.
  * This function is meant to be used for BSS association for example, where we
  * want to make sure that the fw stays on the channel during the association.
  */
 void iwl_mvm_protect_session(struct iwl_mvm *mvm,
 			     struct ieee80211_vif *vif,
 			     u32 duration, u32 min_duration,
 			     u32 max_delay, bool wait_for_notif);

 /**
  * iwl_mvm_stop_session_protection - cancel the session protection.
  * @mvm: the mvm component
  * @vif: the virtual interface for which the session is issued
  *
  * This functions cancels the session protection which is an act of good
  * citizenship. If it is not needed any more it should be canceled because
  * the other bindings wait for the medium during that time.
  * This funtions doesn't sleep.
  */
 void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm,
 				      struct ieee80211_vif *vif);

 /*
  * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION.
  */
 void iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm,
 				 struct iwl_rx_cmd_buffer *rxb);

 /**
  * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionality
  * @mvm: the mvm component
  * @vif: the virtual interface for which the roc is requested. It is assumed
  * that the vif type is NL80211_IFTYPE_P2P_DEVICE
  * @duration: the requested duration in millisecond for the fw to be on the
  * channel that is bound to the vif.
  * @type: the remain on channel request type
  *
  * This function can be used to issue a remain on channel session,
  * which means that the fw will stay in the channel for the request %duration
  * milliseconds. The function is async, meaning that it only issues the ROC
  * request but does not wait for it to start. Once the FW is ready to serve the
  * ROC request, it will issue a notification to the driver that it is on the
  * requested channel. Once the FW completes the ROC request it will issue
  * another notification to the driver.
  */
 int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			  int duration, enum ieee80211_roc_type type);

 /**
  * iwl_mvm_stop_roc - stop remain on channel functionality
  * @mvm: the mvm component
  * @vif: the virtual interface for which the roc is stopped
  *
  * This function can be used to cancel an ongoing ROC session.
  * The function is async, it will instruct the FW to stop serving the ROC
  * session, but will not wait for the actual stopping of the session.
  */
 void iwl_mvm_stop_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif);

 /**
  * iwl_mvm_remove_time_event - general function to clean up of time event
  * @mvm: the mvm component
  * @vif: the vif to which the time event belongs
  * @te_data: the time event data that corresponds to that time event
  *
  * This function can be used to cancel a time event regardless its type.
  * It is useful for cleaning up time events running before removing an
  * interface.
  */
 void iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
 			       struct iwl_mvm_vif *mvmvif,
 			       struct iwl_mvm_time_event_data *te_data);

 /**
  * iwl_mvm_te_clear_data - remove time event from list
  * @mvm: the mvm component
  * @te_data: the time event data to remove
  *
  * This function is mostly internal, it is made available here only
  * for firmware restart purposes.
  */
 void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
 			   struct iwl_mvm_time_event_data *te_data);

 void iwl_mvm_cleanup_roc_te(struct iwl_mvm *mvm);
 void iwl_mvm_roc_done_wk(struct work_struct *wk);

 void iwl_mvm_remove_csa_period(struct iwl_mvm *mvm,
 			       struct ieee80211_vif *vif);

 /**
  * iwl_mvm_schedule_csa_period - request channel switch absence period
  * @mvm: the mvm component
  * @vif: the virtual interface for which the channel switch is issued
  * @duration: the duration of the NoA in TU.
  * @apply_time: NoA start time in GP2.
  *
  * This function is used to schedule NoA time event and is used to perform
  * the channel switch flow.
  */
 int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm,
 				struct ieee80211_vif *vif,
 				u32 duration, u32 apply_time);

 /**
  * iwl_mvm_te_scheduled - check if the fw received the TE cmd
  * @te_data: the time event data that corresponds to that time event
  *
  * This function returns true iff this TE is added to the fw.
  */
 static inline bool
 iwl_mvm_te_scheduled(struct iwl_mvm_time_event_data *te_data)
 {
 	if (!te_data)
 		return false;

 	return !!te_data->uid;
 }

 /**
  * iwl_mvm_schedule_session_protection - schedule a session protection
  * @mvm: the mvm component
  * @vif: the virtual interface for which the protection issued
  * @duration: the duration of the protection
  * @wait_for_notif: if true, will block until the start of the protection
  */
 void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
 					 struct ieee80211_vif *vif,
 					 u32 duration, u32 min_duration,
 					 bool wait_for_notif);

 /**
  * iwl_mvm_rx_session_protect_notif - handles %SESSION_PROTECTION_NOTIF
  */
 void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm,
 				      struct iwl_rx_cmd_buffer *rxb);

 #endif /* __time_event_h__ */
	/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
	/*
	* Copyright (C) 2012-2014, 2019-2020 Intel Corporation
	* Copyright (C) 2013-2014 Intel Mobile Communications GmbH
	*/
	#ifndef __time_event_h__
	#define __time_event_h__

	#include "fw-api.h"

	#include "mvm.h"

	/**
	* DOC: Time Events - what is it?
	*
	* Time Events are a fw feature that allows the driver to control the presence
	* of the device on the channel. Since the fw supports multiple channels
	* concurrently, the fw may choose to jump to another channel at any time.
	* In order to make sure that the fw is on a specific channel at a certain time
	* and for a certain duration, the driver needs to issue a time event.
	*
	* The simplest example is for BSS association. The driver issues a time event,
	* waits for it to start, and only then tells mac80211 that we can start the
	* association. This way, we make sure that the association will be done
	* smoothly and won't be interrupted by channel switch decided within the fw.
	*/

	/**
	* DOC: The flow against the fw
	*
	* When the driver needs to make sure we are in a certain channel, at a certain
	* time and for a certain duration, it sends a Time Event. The flow against the
	* fw goes like this:
	* 1) Driver sends a TIME_EVENT_CMD to the fw
	* 2) Driver gets the response for that command. This response contains the
	* Unique ID (UID) of the event.
	* 3) The fw sends notification when the event starts.
	*
	* Of course the API provides various options that allow to cover parameters
	* of the flow.
	* What is the duration of the event?
	* What is the start time of the event?
	* Is there an end-time for the event?
	* How much can the event be delayed?
	* Can the event be split?
	* If yes what is the maximal number of chunks?
	* etc...
	*/

	/**
	* DOC: Abstraction to the driver
	*
	* In order to simplify the use of time events to the rest of the driver,
	* we abstract the use of time events. This component provides the functions
	* needed by the driver.
	*/

	#define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 600
	#define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400

	/**
	* iwl_mvm_protect_session - start / extend the session protection.
	* @mvm: the mvm component
	* @vif: the virtual interface for which the session is issued
	* @duration: the duration of the session in TU.
	* @min_duration: will start a new session if the current session will end
	* in less than min_duration.
	* @max_delay: maximum delay before starting the time event (in TU)
	* @wait_for_notif: true if it is required that a time event notification be
	* waited for (that the time event has been scheduled before returning)
	*
	* This function can be used to start a session protection which means that the
	* fw will stay on the channel for %duration_ms milliseconds. This function
	* can block (sleep) until the session starts. This function can also be used
	* to extend a currently running session.
	* This function is meant to be used for BSS association for example, where we
	* want to make sure that the fw stays on the channel during the association.
	*/
	void iwl_mvm_protect_session(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif,
	u32 duration, u32 min_duration,
	u32 max_delay, bool wait_for_notif);

	/**
	* iwl_mvm_stop_session_protection - cancel the session protection.
	* @mvm: the mvm component
	* @vif: the virtual interface for which the session is issued
	*
	* This functions cancels the session protection which is an act of good
	* citizenship. If it is not needed any more it should be canceled because
	* the other bindings wait for the medium during that time.
	* This funtions doesn't sleep.
	*/
	void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif);

	/*
	* iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION.
	*/
	void iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm,
	struct iwl_rx_cmd_buffer *rxb);

	/**
	* iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionality
	* @mvm: the mvm component
	* @vif: the virtual interface for which the roc is requested. It is assumed
	* that the vif type is NL80211_IFTYPE_P2P_DEVICE
	* @duration: the requested duration in millisecond for the fw to be on the
	* channel that is bound to the vif.
	* @type: the remain on channel request type
	*
	* This function can be used to issue a remain on channel session,
	* which means that the fw will stay in the channel for the request %duration
	* milliseconds. The function is async, meaning that it only issues the ROC
	* request but does not wait for it to start. Once the FW is ready to serve the
	* ROC request, it will issue a notification to the driver that it is on the
	* requested channel. Once the FW completes the ROC request it will issue
	* another notification to the driver.
	*/
	int iwl_mvm_start_p2p_roc(struct iwl_mvm mvm, struct ieee80211_vif vif,
	int duration, enum ieee80211_roc_type type);

	/**
	* iwl_mvm_stop_roc - stop remain on channel functionality
	* @mvm: the mvm component
	* @vif: the virtual interface for which the roc is stopped
	*
	* This function can be used to cancel an ongoing ROC session.
	* The function is async, it will instruct the FW to stop serving the ROC
	* session, but will not wait for the actual stopping of the session.
	*/
	void iwl_mvm_stop_roc(struct iwl_mvm mvm, struct ieee80211_vif vif);

	/**
	* iwl_mvm_remove_time_event - general function to clean up of time event
	* @mvm: the mvm component
	* @vif: the vif to which the time event belongs
	* @te_data: the time event data that corresponds to that time event
	*
	* This function can be used to cancel a time event regardless its type.
	* It is useful for cleaning up time events running before removing an
	* interface.
	*/
	void iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
	struct iwl_mvm_vif *mvmvif,
	struct iwl_mvm_time_event_data *te_data);

	/**
	* iwl_mvm_te_clear_data - remove time event from list
	* @mvm: the mvm component
	* @te_data: the time event data to remove
	*
	* This function is mostly internal, it is made available here only
	* for firmware restart purposes.
	*/
	void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
	struct iwl_mvm_time_event_data *te_data);

	void iwl_mvm_cleanup_roc_te(struct iwl_mvm *mvm);
	void iwl_mvm_roc_done_wk(struct work_struct *wk);

	void iwl_mvm_remove_csa_period(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif);

	/**
	* iwl_mvm_schedule_csa_period - request channel switch absence period
	* @mvm: the mvm component
	* @vif: the virtual interface for which the channel switch is issued
	* @duration: the duration of the NoA in TU.
	* @apply_time: NoA start time in GP2.
	*
	* This function is used to schedule NoA time event and is used to perform
	* the channel switch flow.
	*/
	int iwl_mvm_schedule_csa_period(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif,
	u32 duration, u32 apply_time);

	/**
	* iwl_mvm_te_scheduled - check if the fw received the TE cmd
	* @te_data: the time event data that corresponds to that time event
	*
	* This function returns true iff this TE is added to the fw.
	*/
	static inline bool
	iwl_mvm_te_scheduled(struct iwl_mvm_time_event_data *te_data)
	{
	if (!te_data)
	return false;

	return !!te_data->uid;
	}

	/**
	* iwl_mvm_schedule_session_protection - schedule a session protection
	* @mvm: the mvm component
	* @vif: the virtual interface for which the protection issued
	* @duration: the duration of the protection
	* @wait_for_notif: if true, will block until the start of the protection
	*/
	void iwl_mvm_schedule_session_protection(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif,
	u32 duration, u32 min_duration,
	bool wait_for_notif);

	/**
	* iwl_mvm_rx_session_protect_notif - handles %SESSION_PROTECTION_NOTIF
	*/
	void iwl_mvm_rx_session_protect_notif(struct iwl_mvm *mvm,
	struct iwl_rx_cmd_buffer *rxb);

	#endif /* __time_event_h__ */