| /* |
| * drivers/input/tablet/wacom_sys.c |
| * |
| * USB Wacom Graphire and Wacom Intuos tablet support - system specific code |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "wacom.h" |
| #include "wacom_wac.h" |
| |
| #define USB_REQ_GET_REPORT 0x01 |
| #define USB_REQ_SET_REPORT 0x09 |
| |
| static int usb_get_report(struct usb_interface *intf, unsigned char type, |
| unsigned char id, void *buf, int size) |
| { |
| return usb_control_msg(interface_to_usbdev(intf), |
| usb_rcvctrlpipe(interface_to_usbdev(intf), 0), |
| USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, |
| buf, size, 100); |
| } |
| |
| static int usb_set_report(struct usb_interface *intf, unsigned char type, |
| unsigned char id, void *buf, int size) |
| { |
| return usb_control_msg(interface_to_usbdev(intf), |
| usb_sndctrlpipe(interface_to_usbdev(intf), 0), |
| USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, |
| buf, size, 1000); |
| } |
| |
| static struct input_dev * get_input_dev(struct wacom_combo *wcombo) |
| { |
| return wcombo->wacom->dev; |
| } |
| |
| static void wacom_sys_irq(struct urb *urb) |
| { |
| struct wacom *wacom = urb->context; |
| struct wacom_combo wcombo; |
| int retval; |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dbg("%s - urb shutting down with status: %d", __func__, urb->status); |
| return; |
| default: |
| dbg("%s - nonzero urb status received: %d", __func__, urb->status); |
| goto exit; |
| } |
| |
| wcombo.wacom = wacom; |
| wcombo.urb = urb; |
| |
| if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo)) |
| input_sync(get_input_dev(&wcombo)); |
| |
| exit: |
| usb_mark_last_busy(wacom->usbdev); |
| retval = usb_submit_urb (urb, GFP_ATOMIC); |
| if (retval) |
| err ("%s - usb_submit_urb failed with result %d", |
| __func__, retval); |
| } |
| |
| void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) |
| { |
| input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); |
| return; |
| } |
| |
| void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) |
| { |
| input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); |
| return; |
| } |
| |
| void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) |
| { |
| input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); |
| return; |
| } |
| |
| void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) |
| { |
| input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); |
| return; |
| } |
| |
| __u16 wacom_be16_to_cpu(unsigned char *data) |
| { |
| __u16 value; |
| value = be16_to_cpu(*(__be16 *) data); |
| return value; |
| } |
| |
| __u16 wacom_le16_to_cpu(unsigned char *data) |
| { |
| __u16 value; |
| value = le16_to_cpu(*(__le16 *) data); |
| return value; |
| } |
| |
| void wacom_input_sync(void *wcombo) |
| { |
| input_sync(get_input_dev((struct wacom_combo *)wcombo)); |
| return; |
| } |
| |
| static int wacom_open(struct input_dev *dev) |
| { |
| struct wacom *wacom = input_get_drvdata(dev); |
| |
| mutex_lock(&wacom->lock); |
| |
| wacom->irq->dev = wacom->usbdev; |
| |
| if (usb_autopm_get_interface(wacom->intf) < 0) { |
| mutex_unlock(&wacom->lock); |
| return -EIO; |
| } |
| |
| if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { |
| usb_autopm_put_interface(wacom->intf); |
| mutex_unlock(&wacom->lock); |
| return -EIO; |
| } |
| |
| wacom->open = 1; |
| wacom->intf->needs_remote_wakeup = 1; |
| |
| mutex_unlock(&wacom->lock); |
| return 0; |
| } |
| |
| static void wacom_close(struct input_dev *dev) |
| { |
| struct wacom *wacom = input_get_drvdata(dev); |
| |
| mutex_lock(&wacom->lock); |
| usb_kill_urb(wacom->irq); |
| wacom->open = 0; |
| wacom->intf->needs_remote_wakeup = 0; |
| mutex_unlock(&wacom->lock); |
| } |
| |
| void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) | |
| BIT_MASK(BTN_5); |
| input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); |
| } |
| |
| void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->evbit[0] |= BIT_MASK(EV_MSC); |
| input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | |
| BIT_MASK(BTN_4); |
| } |
| |
| void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->evbit[0] |= BIT_MASK(EV_REL); |
| input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | |
| BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | |
| BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2); |
| input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); |
| } |
| |
| void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | |
| BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); |
| input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); |
| input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); |
| } |
| |
| void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) | |
| BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7); |
| input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); |
| } |
| |
| void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); |
| } |
| |
| void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); |
| input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); |
| input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); |
| input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | |
| BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) | |
| BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | |
| BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_TOOL_BRUSH) | |
| BIT_MASK(BTN_TOOL_PENCIL) | BIT_MASK(BTN_TOOL_AIRBRUSH) | |
| BIT_MASK(BTN_TOOL_LENS) | BIT_MASK(BTN_STYLUS2); |
| input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0); |
| input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); |
| input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0); |
| input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0); |
| input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); |
| input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); |
| } |
| |
| void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) | |
| BIT_MASK(BTN_TOOL_RUBBER); |
| } |
| |
| void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) |
| { |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER); |
| } |
| |
| static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct usb_endpoint_descriptor *endpoint; |
| struct wacom *wacom; |
| struct wacom_wac *wacom_wac; |
| struct input_dev *input_dev; |
| int error = -ENOMEM; |
| char rep_data[2], limit = 0; |
| |
| wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); |
| wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!wacom || !input_dev || !wacom_wac) |
| goto fail1; |
| |
| wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma); |
| if (!wacom_wac->data) |
| goto fail1; |
| |
| wacom->irq = usb_alloc_urb(0, GFP_KERNEL); |
| if (!wacom->irq) |
| goto fail2; |
| |
| wacom->usbdev = dev; |
| wacom->dev = input_dev; |
| wacom->intf = intf; |
| mutex_init(&wacom->lock); |
| usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); |
| strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); |
| |
| wacom_wac->features = get_wacom_feature(id); |
| BUG_ON(wacom_wac->features->pktlen > 10); |
| |
| input_dev->name = wacom_wac->features->name; |
| wacom->wacom_wac = wacom_wac; |
| usb_to_input_id(dev, &input_dev->id); |
| |
| input_dev->dev.parent = &intf->dev; |
| |
| input_set_drvdata(input_dev, wacom); |
| |
| input_dev->open = wacom_open; |
| input_dev->close = wacom_close; |
| |
| input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); |
| input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) | |
| BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS); |
| input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); |
| input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); |
| input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); |
| input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); |
| |
| wacom_init_input_dev(input_dev, wacom_wac); |
| |
| endpoint = &intf->cur_altsetting->endpoint[0].desc; |
| |
| usb_fill_int_urb(wacom->irq, dev, |
| usb_rcvintpipe(dev, endpoint->bEndpointAddress), |
| wacom_wac->data, wacom_wac->features->pktlen, |
| wacom_sys_irq, wacom, endpoint->bInterval); |
| wacom->irq->transfer_dma = wacom->data_dma; |
| wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| error = input_register_device(wacom->dev); |
| if (error) |
| goto fail3; |
| |
| /* Ask the tablet to report tablet data. Repeat until it succeeds */ |
| do { |
| rep_data[0] = 2; |
| rep_data[1] = 2; |
| usb_set_report(intf, 3, 2, rep_data, 2); |
| usb_get_report(intf, 3, 2, rep_data, 2); |
| } while (rep_data[1] != 2 && limit++ < 5); |
| |
| usb_set_intfdata(intf, wacom); |
| return 0; |
| |
| fail3: usb_free_urb(wacom->irq); |
| fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma); |
| fail1: input_free_device(input_dev); |
| kfree(wacom); |
| kfree(wacom_wac); |
| return error; |
| } |
| |
| static void wacom_disconnect(struct usb_interface *intf) |
| { |
| struct wacom *wacom = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| |
| usb_kill_urb(wacom->irq); |
| input_unregister_device(wacom->dev); |
| usb_free_urb(wacom->irq); |
| usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); |
| kfree(wacom->wacom_wac); |
| kfree(wacom); |
| } |
| |
| static int wacom_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct wacom *wacom = usb_get_intfdata(intf); |
| |
| mutex_lock(&wacom->lock); |
| usb_kill_urb(wacom->irq); |
| mutex_unlock(&wacom->lock); |
| |
| return 0; |
| } |
| |
| static int wacom_resume(struct usb_interface *intf) |
| { |
| struct wacom *wacom = usb_get_intfdata(intf); |
| int rv; |
| |
| mutex_lock(&wacom->lock); |
| if (wacom->open) |
| rv = usb_submit_urb(wacom->irq, GFP_NOIO); |
| else |
| rv = 0; |
| mutex_unlock(&wacom->lock); |
| |
| return rv; |
| } |
| |
| static int wacom_reset_resume(struct usb_interface *intf) |
| { |
| return wacom_resume(intf); |
| } |
| |
| static struct usb_driver wacom_driver = { |
| .name = "wacom", |
| .probe = wacom_probe, |
| .disconnect = wacom_disconnect, |
| .suspend = wacom_suspend, |
| .resume = wacom_resume, |
| .reset_resume = wacom_reset_resume, |
| .supports_autosuspend = 1, |
| }; |
| |
| static int __init wacom_init(void) |
| { |
| int result; |
| wacom_driver.id_table = get_device_table(); |
| result = usb_register(&wacom_driver); |
| if (result == 0) |
| info(DRIVER_VERSION ":" DRIVER_DESC); |
| return result; |
| } |
| |
| static void __exit wacom_exit(void) |
| { |
| usb_deregister(&wacom_driver); |
| } |
| |
| module_init(wacom_init); |
| module_exit(wacom_exit); |