| * TI OMAP SDHCI Controller |
| |
| Refer to mmc.txt for standard MMC bindings. |
| |
| For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning. |
| |
| Required properties: |
| - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers |
| Should be "ti,k2g-sdhci" for K2G |
| - ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 |
| (Not required for K2G). |
| - pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50", |
| "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104", |
| "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11", |
| "hs200_1_8v", |
| - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt |
| |
| Example: |
| mmc1: mmc@4809c000 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x4809c000 0x400>; |
| ti,hwmods = "mmc1"; |
| bus-width = <4>; |
| vmmc-supply = <&vmmc>; /* phandle to regulator node */ |
| }; |
