| /* | 
 |  * 3215 line mode terminal driver. | 
 |  * | 
 |  * Copyright IBM Corp. 1999, 2009 | 
 |  * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> | 
 |  * | 
 |  * Updated: | 
 |  *  Aug-2000: Added tab support | 
 |  *	      Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu> | 
 |  */ | 
 |  | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/module.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kdev_t.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/tty_flip.h> | 
 | #include <linux/vt_kern.h> | 
 | #include <linux/init.h> | 
 | #include <linux/console.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/err.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/slab.h> | 
 | #include <asm/ccwdev.h> | 
 | #include <asm/cio.h> | 
 | #include <asm/io.h> | 
 | #include <asm/ebcdic.h> | 
 | #include <asm/uaccess.h> | 
 | #include <asm/delay.h> | 
 | #include <asm/cpcmd.h> | 
 | #include <asm/setup.h> | 
 |  | 
 | #include "ctrlchar.h" | 
 |  | 
 | #define NR_3215		    1 | 
 | #define NR_3215_REQ	    (4*NR_3215) | 
 | #define RAW3215_BUFFER_SIZE 65536     /* output buffer size */ | 
 | #define RAW3215_INBUF_SIZE  256	      /* input buffer size */ | 
 | #define RAW3215_MIN_SPACE   128	      /* minimum free space for wakeup */ | 
 | #define RAW3215_MIN_WRITE   1024      /* min. length for immediate output */ | 
 | #define RAW3215_MAX_BYTES   3968      /* max. bytes to write with one ssch */ | 
 | #define RAW3215_MAX_NEWLINE 50	      /* max. lines to write with one ssch */ | 
 | #define RAW3215_NR_CCWS	    3 | 
 | #define RAW3215_TIMEOUT	    HZ/10     /* time for delayed output */ | 
 |  | 
 | #define RAW3215_FIXED	    1	      /* 3215 console device is not be freed */ | 
 | #define RAW3215_ACTIVE	    2	      /* set if the device is in use */ | 
 | #define RAW3215_WORKING	    4	      /* set if a request is being worked on */ | 
 | #define RAW3215_THROTTLED   8	      /* set if reading is disabled */ | 
 | #define RAW3215_STOPPED	    16	      /* set if writing is disabled */ | 
 | #define RAW3215_CLOSING	    32	      /* set while in close process */ | 
 | #define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */ | 
 | #define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */ | 
 | #define RAW3215_FROZEN	    256	      /* set if 3215 is frozen for suspend */ | 
 |  | 
 | #define TAB_STOP_SIZE	    8	      /* tab stop size */ | 
 |  | 
 | /* | 
 |  * Request types for a 3215 device | 
 |  */ | 
 | enum raw3215_type { | 
 | 	RAW3215_FREE, RAW3215_READ, RAW3215_WRITE | 
 | }; | 
 |  | 
 | /* | 
 |  * Request structure for a 3215 device | 
 |  */ | 
 | struct raw3215_req { | 
 | 	enum raw3215_type type;	      /* type of the request */ | 
 | 	int start, len;		      /* start index & len in output buffer */ | 
 | 	int delayable;		      /* indication to wait for more data */ | 
 | 	int residual;		      /* residual count for read request */ | 
 | 	struct ccw1 ccws[RAW3215_NR_CCWS]; /* space for the channel program */ | 
 | 	struct raw3215_info *info;    /* pointer to main structure */ | 
 | 	struct raw3215_req *next;     /* pointer to next request */ | 
 | } __attribute__ ((aligned(8))); | 
 |  | 
 | struct raw3215_info { | 
 | 	struct ccw_device *cdev;      /* device for tty driver */ | 
 | 	spinlock_t *lock;	      /* pointer to irq lock */ | 
 | 	int flags;		      /* state flags */ | 
 | 	char *buffer;		      /* pointer to output buffer */ | 
 | 	char *inbuf;		      /* pointer to input buffer */ | 
 | 	int head;		      /* first free byte in output buffer */ | 
 | 	int count;		      /* number of bytes in output buffer */ | 
 | 	int written;		      /* number of bytes in write requests */ | 
 | 	struct tty_struct *tty;	      /* pointer to tty structure if present */ | 
 | 	struct raw3215_req *queued_read; /* pointer to queued read requests */ | 
 | 	struct raw3215_req *queued_write;/* pointer to queued write requests */ | 
 | 	wait_queue_head_t empty_wait; /* wait queue for flushing */ | 
 | 	struct timer_list timer;      /* timer for delayed output */ | 
 | 	int line_pos;		      /* position on the line (for tabs) */ | 
 | 	char ubuffer[80];	      /* copy_from_user buffer */ | 
 | }; | 
 |  | 
 | /* array of 3215 devices structures */ | 
 | static struct raw3215_info *raw3215[NR_3215]; | 
 | /* spinlock to protect the raw3215 array */ | 
 | static DEFINE_SPINLOCK(raw3215_device_lock); | 
 | /* list of free request structures */ | 
 | static struct raw3215_req *raw3215_freelist; | 
 | /* spinlock to protect free list */ | 
 | static spinlock_t raw3215_freelist_lock; | 
 |  | 
 | static struct tty_driver *tty3215_driver; | 
 |  | 
 | /* | 
 |  * Get a request structure from the free list | 
 |  */ | 
 | static inline struct raw3215_req *raw3215_alloc_req(void) | 
 | { | 
 | 	struct raw3215_req *req; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&raw3215_freelist_lock, flags); | 
 | 	req = raw3215_freelist; | 
 | 	raw3215_freelist = req->next; | 
 | 	spin_unlock_irqrestore(&raw3215_freelist_lock, flags); | 
 | 	return req; | 
 | } | 
 |  | 
 | /* | 
 |  * Put a request structure back to the free list | 
 |  */ | 
 | static inline void raw3215_free_req(struct raw3215_req *req) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (req->type == RAW3215_FREE) | 
 | 		return;		/* don't free a free request */ | 
 | 	req->type = RAW3215_FREE; | 
 | 	spin_lock_irqsave(&raw3215_freelist_lock, flags); | 
 | 	req->next = raw3215_freelist; | 
 | 	raw3215_freelist = req; | 
 | 	spin_unlock_irqrestore(&raw3215_freelist_lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Set up a read request that reads up to 160 byte from the 3215 device. | 
 |  * If there is a queued read request it is used, but that shouldn't happen | 
 |  * because a 3215 terminal won't accept a new read before the old one is | 
 |  * completed. | 
 |  */ | 
 | static void raw3215_mk_read_req(struct raw3215_info *raw) | 
 | { | 
 | 	struct raw3215_req *req; | 
 | 	struct ccw1 *ccw; | 
 |  | 
 | 	/* there can only be ONE read request at a time */ | 
 | 	req = raw->queued_read; | 
 | 	if (req == NULL) { | 
 | 		/* no queued read request, use new req structure */ | 
 | 		req = raw3215_alloc_req(); | 
 | 		req->type = RAW3215_READ; | 
 | 		req->info = raw; | 
 | 		raw->queued_read = req; | 
 | 	} | 
 |  | 
 | 	ccw = req->ccws; | 
 | 	ccw->cmd_code = 0x0A; /* read inquiry */ | 
 | 	ccw->flags = 0x20;    /* ignore incorrect length */ | 
 | 	ccw->count = 160; | 
 | 	ccw->cda = (__u32) __pa(raw->inbuf); | 
 | } | 
 |  | 
 | /* | 
 |  * Set up a write request with the information from the main structure. | 
 |  * A ccw chain is created that writes as much as possible from the output | 
 |  * buffer to the 3215 device. If a queued write exists it is replaced by | 
 |  * the new, probably lengthened request. | 
 |  */ | 
 | static void raw3215_mk_write_req(struct raw3215_info *raw) | 
 | { | 
 | 	struct raw3215_req *req; | 
 | 	struct ccw1 *ccw; | 
 | 	int len, count, ix, lines; | 
 |  | 
 | 	if (raw->count <= raw->written) | 
 | 		return; | 
 | 	/* check if there is a queued write request */ | 
 | 	req = raw->queued_write; | 
 | 	if (req == NULL) { | 
 | 		/* no queued write request, use new req structure */ | 
 | 		req = raw3215_alloc_req(); | 
 | 		req->type = RAW3215_WRITE; | 
 | 		req->info = raw; | 
 | 		raw->queued_write = req; | 
 | 	} else { | 
 | 		raw->written -= req->len; | 
 | 	} | 
 |  | 
 | 	ccw = req->ccws; | 
 | 	req->start = (raw->head - raw->count + raw->written) & | 
 | 		     (RAW3215_BUFFER_SIZE - 1); | 
 | 	/* | 
 | 	 * now we have to count newlines. We can at max accept | 
 | 	 * RAW3215_MAX_NEWLINE newlines in a single ssch due to | 
 | 	 * a restriction in VM | 
 | 	 */ | 
 | 	lines = 0; | 
 | 	ix = req->start; | 
 | 	while (lines < RAW3215_MAX_NEWLINE && ix != raw->head) { | 
 | 		if (raw->buffer[ix] == 0x15) | 
 | 			lines++; | 
 | 		ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1); | 
 | 	} | 
 | 	len = ((ix - 1 - req->start) & (RAW3215_BUFFER_SIZE - 1)) + 1; | 
 | 	if (len > RAW3215_MAX_BYTES) | 
 | 		len = RAW3215_MAX_BYTES; | 
 | 	req->len = len; | 
 | 	raw->written += len; | 
 |  | 
 | 	/* set the indication if we should try to enlarge this request */ | 
 | 	req->delayable = (ix == raw->head) && (len < RAW3215_MIN_WRITE); | 
 |  | 
 | 	ix = req->start; | 
 | 	while (len > 0) { | 
 | 		if (ccw > req->ccws) | 
 | 			ccw[-1].flags |= 0x40; /* use command chaining */ | 
 | 		ccw->cmd_code = 0x01; /* write, auto carrier return */ | 
 | 		ccw->flags = 0x20;    /* ignore incorrect length ind.  */ | 
 | 		ccw->cda = | 
 | 			(__u32) __pa(raw->buffer + ix); | 
 | 		count = len; | 
 | 		if (ix + count > RAW3215_BUFFER_SIZE) | 
 | 			count = RAW3215_BUFFER_SIZE - ix; | 
 | 		ccw->count = count; | 
 | 		len -= count; | 
 | 		ix = (ix + count) & (RAW3215_BUFFER_SIZE - 1); | 
 | 		ccw++; | 
 | 	} | 
 | 	/* | 
 | 	 * Add a NOP to the channel program. 3215 devices are purely | 
 | 	 * emulated and its much better to avoid the channel end | 
 | 	 * interrupt in this case. | 
 | 	 */ | 
 | 	if (ccw > req->ccws) | 
 | 		ccw[-1].flags |= 0x40; /* use command chaining */ | 
 | 	ccw->cmd_code = 0x03; /* NOP */ | 
 | 	ccw->flags = 0; | 
 | 	ccw->cda = 0; | 
 | 	ccw->count = 1; | 
 | } | 
 |  | 
 | /* | 
 |  * Start a read or a write request | 
 |  */ | 
 | static void raw3215_start_io(struct raw3215_info *raw) | 
 | { | 
 | 	struct raw3215_req *req; | 
 | 	int res; | 
 |  | 
 | 	req = raw->queued_read; | 
 | 	if (req != NULL && | 
 | 	    !(raw->flags & (RAW3215_WORKING | RAW3215_THROTTLED))) { | 
 | 		/* dequeue request */ | 
 | 		raw->queued_read = NULL; | 
 | 		res = ccw_device_start(raw->cdev, req->ccws, | 
 | 				       (unsigned long) req, 0, 0); | 
 | 		if (res != 0) { | 
 | 			/* do_IO failed, put request back to queue */ | 
 | 			raw->queued_read = req; | 
 | 		} else { | 
 | 			raw->flags |= RAW3215_WORKING; | 
 | 		} | 
 | 	} | 
 | 	req = raw->queued_write; | 
 | 	if (req != NULL && | 
 | 	    !(raw->flags & (RAW3215_WORKING | RAW3215_STOPPED))) { | 
 | 		/* dequeue request */ | 
 | 		raw->queued_write = NULL; | 
 | 		res = ccw_device_start(raw->cdev, req->ccws, | 
 | 				       (unsigned long) req, 0, 0); | 
 | 		if (res != 0) { | 
 | 			/* do_IO failed, put request back to queue */ | 
 | 			raw->queued_write = req; | 
 | 		} else { | 
 | 			raw->flags |= RAW3215_WORKING; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Function to start a delayed output after RAW3215_TIMEOUT seconds | 
 |  */ | 
 | static void raw3215_timeout(unsigned long __data) | 
 | { | 
 | 	struct raw3215_info *raw = (struct raw3215_info *) __data; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	if (raw->flags & RAW3215_TIMER_RUNS) { | 
 | 		del_timer(&raw->timer); | 
 | 		raw->flags &= ~RAW3215_TIMER_RUNS; | 
 | 		if (!(raw->flags & RAW3215_FROZEN)) { | 
 | 			raw3215_mk_write_req(raw); | 
 | 			raw3215_start_io(raw); | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Function to conditionally start an IO. A read is started immediately, | 
 |  * a write is only started immediately if the flush flag is on or the | 
 |  * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not | 
 |  * done immediately a timer is started with a delay of RAW3215_TIMEOUT. | 
 |  */ | 
 | static inline void raw3215_try_io(struct raw3215_info *raw) | 
 | { | 
 | 	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FROZEN)) | 
 | 		return; | 
 | 	if (raw->queued_read != NULL) | 
 | 		raw3215_start_io(raw); | 
 | 	else if (raw->queued_write != NULL) { | 
 | 		if ((raw->queued_write->delayable == 0) || | 
 | 		    (raw->flags & RAW3215_FLUSHING)) { | 
 | 			/* execute write requests bigger than minimum size */ | 
 | 			raw3215_start_io(raw); | 
 | 			if (raw->flags & RAW3215_TIMER_RUNS) { | 
 | 				del_timer(&raw->timer); | 
 | 				raw->flags &= ~RAW3215_TIMER_RUNS; | 
 | 			} | 
 | 		} else if (!(raw->flags & RAW3215_TIMER_RUNS)) { | 
 | 			/* delay small writes */ | 
 | 			init_timer(&raw->timer); | 
 | 			raw->timer.expires = RAW3215_TIMEOUT + jiffies; | 
 | 			raw->timer.data = (unsigned long) raw; | 
 | 			raw->timer.function = raw3215_timeout; | 
 | 			add_timer(&raw->timer); | 
 | 			raw->flags |= RAW3215_TIMER_RUNS; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Try to start the next IO and wake up processes waiting on the tty. | 
 |  */ | 
 | static void raw3215_next_io(struct raw3215_info *raw) | 
 | { | 
 | 	struct tty_struct *tty; | 
 |  | 
 | 	raw3215_mk_write_req(raw); | 
 | 	raw3215_try_io(raw); | 
 | 	tty = raw->tty; | 
 | 	if (tty != NULL && | 
 | 	    RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) { | 
 | 	    	tty_wakeup(tty); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Interrupt routine, called from common io layer | 
 |  */ | 
 | static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm, | 
 | 			struct irb *irb) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	struct raw3215_req *req; | 
 | 	struct tty_struct *tty; | 
 | 	int cstat, dstat; | 
 | 	int count; | 
 |  | 
 | 	kstat_cpu(smp_processor_id()).irqs[IOINT_C15]++; | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	req = (struct raw3215_req *) intparm; | 
 | 	cstat = irb->scsw.cmd.cstat; | 
 | 	dstat = irb->scsw.cmd.dstat; | 
 | 	if (cstat != 0) | 
 | 		raw3215_next_io(raw); | 
 | 	if (dstat & 0x01) { /* we got a unit exception */ | 
 | 		dstat &= ~0x01;	 /* we can ignore it */ | 
 | 	} | 
 | 	switch (dstat) { | 
 | 	case 0x80: | 
 | 		if (cstat != 0) | 
 | 			break; | 
 | 		/* Attention interrupt, someone hit the enter key */ | 
 | 		raw3215_mk_read_req(raw); | 
 | 		raw3215_next_io(raw); | 
 | 		break; | 
 | 	case 0x08: | 
 | 	case 0x0C: | 
 | 		/* Channel end interrupt. */ | 
 | 		if ((raw = req->info) == NULL) | 
 | 			return;		     /* That shouldn't happen ... */ | 
 | 		if (req->type == RAW3215_READ) { | 
 | 			/* store residual count, then wait for device end */ | 
 | 			req->residual = irb->scsw.cmd.count; | 
 | 		} | 
 | 		if (dstat == 0x08) | 
 | 			break; | 
 | 	case 0x04: | 
 | 		/* Device end interrupt. */ | 
 | 		if ((raw = req->info) == NULL) | 
 | 			return;		     /* That shouldn't happen ... */ | 
 | 		if (req->type == RAW3215_READ && raw->tty != NULL) { | 
 | 			unsigned int cchar; | 
 |  | 
 | 			tty = raw->tty; | 
 | 			count = 160 - req->residual; | 
 | 			EBCASC(raw->inbuf, count); | 
 | 			cchar = ctrlchar_handle(raw->inbuf, count, tty); | 
 | 			switch (cchar & CTRLCHAR_MASK) { | 
 | 			case CTRLCHAR_SYSRQ: | 
 | 				break; | 
 |  | 
 | 			case CTRLCHAR_CTRL: | 
 | 				tty_insert_flip_char(tty, cchar, TTY_NORMAL); | 
 | 				tty_flip_buffer_push(raw->tty); | 
 | 				break; | 
 |  | 
 | 			case CTRLCHAR_NONE: | 
 | 				if (count < 2 || | 
 | 				    (strncmp(raw->inbuf+count-2, "\252n", 2) && | 
 | 				     strncmp(raw->inbuf+count-2, "^n", 2)) ) { | 
 | 					/* add the auto \n */ | 
 | 					raw->inbuf[count] = '\n'; | 
 | 					count++; | 
 | 				} else | 
 | 					count -= 2; | 
 | 				tty_insert_flip_string(tty, raw->inbuf, count); | 
 | 				tty_flip_buffer_push(raw->tty); | 
 | 				break; | 
 | 			} | 
 | 		} else if (req->type == RAW3215_WRITE) { | 
 | 			raw->count -= req->len; | 
 | 			raw->written -= req->len; | 
 | 		} | 
 | 		raw->flags &= ~RAW3215_WORKING; | 
 | 		raw3215_free_req(req); | 
 | 		/* check for empty wait */ | 
 | 		if (waitqueue_active(&raw->empty_wait) && | 
 | 		    raw->queued_write == NULL && | 
 | 		    raw->queued_read == NULL) { | 
 | 			wake_up_interruptible(&raw->empty_wait); | 
 | 		} | 
 | 		raw3215_next_io(raw); | 
 | 		break; | 
 | 	default: | 
 | 		/* Strange interrupt, I'll do my best to clean up */ | 
 | 		if (req != NULL && req->type != RAW3215_FREE) { | 
 | 			if (req->type == RAW3215_WRITE) { | 
 | 				raw->count -= req->len; | 
 | 				raw->written -= req->len; | 
 | 			} | 
 | 			raw->flags &= ~RAW3215_WORKING; | 
 | 			raw3215_free_req(req); | 
 | 		} | 
 | 		raw3215_next_io(raw); | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * Drop the oldest line from the output buffer. | 
 |  */ | 
 | static void raw3215_drop_line(struct raw3215_info *raw) | 
 | { | 
 | 	int ix; | 
 | 	char ch; | 
 |  | 
 | 	BUG_ON(raw->written != 0); | 
 | 	ix = (raw->head - raw->count) & (RAW3215_BUFFER_SIZE - 1); | 
 | 	while (raw->count > 0) { | 
 | 		ch = raw->buffer[ix]; | 
 | 		ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1); | 
 | 		raw->count--; | 
 | 		if (ch == 0x15) | 
 | 			break; | 
 | 	} | 
 | 	raw->head = ix; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait until length bytes are available int the output buffer. | 
 |  * Has to be called with the s390irq lock held. Can be called | 
 |  * disabled. | 
 |  */ | 
 | static void raw3215_make_room(struct raw3215_info *raw, unsigned int length) | 
 | { | 
 | 	while (RAW3215_BUFFER_SIZE - raw->count < length) { | 
 | 		/* While console is frozen for suspend we have no other | 
 | 		 * choice but to drop message from the buffer to make | 
 | 		 * room for even more messages. */ | 
 | 		if (raw->flags & RAW3215_FROZEN) { | 
 | 			raw3215_drop_line(raw); | 
 | 			continue; | 
 | 		} | 
 | 		/* there might be a request pending */ | 
 | 		raw->flags |= RAW3215_FLUSHING; | 
 | 		raw3215_mk_write_req(raw); | 
 | 		raw3215_try_io(raw); | 
 | 		raw->flags &= ~RAW3215_FLUSHING; | 
 | #ifdef CONFIG_TN3215_CONSOLE | 
 | 		wait_cons_dev(); | 
 | #endif | 
 | 		/* Enough room freed up ? */ | 
 | 		if (RAW3215_BUFFER_SIZE - raw->count >= length) | 
 | 			break; | 
 | 		/* there might be another cpu waiting for the lock */ | 
 | 		spin_unlock(get_ccwdev_lock(raw->cdev)); | 
 | 		udelay(100); | 
 | 		spin_lock(get_ccwdev_lock(raw->cdev)); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * String write routine for 3215 devices | 
 |  */ | 
 | static void raw3215_write(struct raw3215_info *raw, const char *str, | 
 | 			  unsigned int length) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int c, count; | 
 |  | 
 | 	while (length > 0) { | 
 | 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 		count = (length > RAW3215_BUFFER_SIZE) ? | 
 | 					     RAW3215_BUFFER_SIZE : length; | 
 | 		length -= count; | 
 |  | 
 | 		raw3215_make_room(raw, count); | 
 |  | 
 | 		/* copy string to output buffer and convert it to EBCDIC */ | 
 | 		while (1) { | 
 | 			c = min_t(int, count, | 
 | 				  min(RAW3215_BUFFER_SIZE - raw->count, | 
 | 				      RAW3215_BUFFER_SIZE - raw->head)); | 
 | 			if (c <= 0) | 
 | 				break; | 
 | 			memcpy(raw->buffer + raw->head, str, c); | 
 | 			ASCEBC(raw->buffer + raw->head, c); | 
 | 			raw->head = (raw->head + c) & (RAW3215_BUFFER_SIZE - 1); | 
 | 			raw->count += c; | 
 | 			raw->line_pos += c; | 
 | 			str += c; | 
 | 			count -= c; | 
 | 		} | 
 | 		if (!(raw->flags & RAW3215_WORKING)) { | 
 | 			raw3215_mk_write_req(raw); | 
 | 			/* start or queue request */ | 
 | 			raw3215_try_io(raw); | 
 | 		} | 
 | 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Put character routine for 3215 devices | 
 |  */ | 
 | static void raw3215_putchar(struct raw3215_info *raw, unsigned char ch) | 
 | { | 
 | 	unsigned long flags; | 
 | 	unsigned int length, i; | 
 |  | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	if (ch == '\t') { | 
 | 		length = TAB_STOP_SIZE - (raw->line_pos%TAB_STOP_SIZE); | 
 | 		raw->line_pos += length; | 
 | 		ch = ' '; | 
 | 	} else if (ch == '\n') { | 
 | 		length = 1; | 
 | 		raw->line_pos = 0; | 
 | 	} else { | 
 | 		length = 1; | 
 | 		raw->line_pos++; | 
 | 	} | 
 | 	raw3215_make_room(raw, length); | 
 |  | 
 | 	for (i = 0; i < length; i++) { | 
 | 		raw->buffer[raw->head] = (char) _ascebc[(int) ch]; | 
 | 		raw->head = (raw->head + 1) & (RAW3215_BUFFER_SIZE - 1); | 
 | 		raw->count++; | 
 | 	} | 
 | 	if (!(raw->flags & RAW3215_WORKING)) { | 
 | 		raw3215_mk_write_req(raw); | 
 | 		/* start or queue request */ | 
 | 		raw3215_try_io(raw); | 
 | 	} | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Flush routine, it simply sets the flush flag and tries to start | 
 |  * pending IO. | 
 |  */ | 
 | static void raw3215_flush_buffer(struct raw3215_info *raw) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	if (raw->count > 0) { | 
 | 		raw->flags |= RAW3215_FLUSHING; | 
 | 		raw3215_try_io(raw); | 
 | 		raw->flags &= ~RAW3215_FLUSHING; | 
 | 	} | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Fire up a 3215 device. | 
 |  */ | 
 | static int raw3215_startup(struct raw3215_info *raw) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (raw->flags & RAW3215_ACTIVE) | 
 | 		return 0; | 
 | 	raw->line_pos = 0; | 
 | 	raw->flags |= RAW3215_ACTIVE; | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	raw3215_try_io(raw); | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Shutdown a 3215 device. | 
 |  */ | 
 | static void raw3215_shutdown(struct raw3215_info *raw) | 
 | { | 
 | 	DECLARE_WAITQUEUE(wait, current); | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED)) | 
 | 		return; | 
 | 	/* Wait for outstanding requests, then free irq */ | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	if ((raw->flags & RAW3215_WORKING) || | 
 | 	    raw->queued_write != NULL || | 
 | 	    raw->queued_read != NULL) { | 
 | 		raw->flags |= RAW3215_CLOSING; | 
 | 		add_wait_queue(&raw->empty_wait, &wait); | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 | 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 		schedule(); | 
 | 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 		remove_wait_queue(&raw->empty_wait, &wait); | 
 | 		set_current_state(TASK_RUNNING); | 
 | 		raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING); | 
 | 	} | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | } | 
 |  | 
 | static int raw3215_probe (struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	int line; | 
 |  | 
 | 	/* Console is special. */ | 
 | 	if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev))) | 
 | 		return 0; | 
 | 	raw = kmalloc(sizeof(struct raw3215_info) + | 
 | 		      RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA); | 
 | 	if (raw == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock(&raw3215_device_lock); | 
 | 	for (line = 0; line < NR_3215; line++) { | 
 | 		if (!raw3215[line]) { | 
 | 			raw3215[line] = raw; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock(&raw3215_device_lock); | 
 | 	if (line == NR_3215) { | 
 | 		kfree(raw); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	raw->cdev = cdev; | 
 | 	raw->inbuf = (char *) raw + sizeof(struct raw3215_info); | 
 | 	memset(raw, 0, sizeof(struct raw3215_info)); | 
 | 	raw->buffer = kmalloc(RAW3215_BUFFER_SIZE, | 
 | 				       GFP_KERNEL|GFP_DMA); | 
 | 	if (raw->buffer == NULL) { | 
 | 		spin_lock(&raw3215_device_lock); | 
 | 		raw3215[line] = NULL; | 
 | 		spin_unlock(&raw3215_device_lock); | 
 | 		kfree(raw); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	init_waitqueue_head(&raw->empty_wait); | 
 |  | 
 | 	dev_set_drvdata(&cdev->dev, raw); | 
 | 	cdev->handler = raw3215_irq; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void raw3215_remove (struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	ccw_device_set_offline(cdev); | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	if (raw) { | 
 | 		dev_set_drvdata(&cdev->dev, NULL); | 
 | 		kfree(raw->buffer); | 
 | 		kfree(raw); | 
 | 	} | 
 | } | 
 |  | 
 | static int raw3215_set_online (struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	if (!raw) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return raw3215_startup(raw); | 
 | } | 
 |  | 
 | static int raw3215_set_offline (struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	if (!raw) | 
 | 		return -ENODEV; | 
 |  | 
 | 	raw3215_shutdown(raw); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int raw3215_pm_stop(struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Empty the output buffer, then prevent new I/O. */ | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE); | 
 | 	raw->flags |= RAW3215_FROZEN; | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int raw3215_pm_start(struct ccw_device *cdev) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Allow I/O again and flush output buffer. */ | 
 | 	raw = dev_get_drvdata(&cdev->dev); | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	raw->flags &= ~RAW3215_FROZEN; | 
 | 	raw->flags |= RAW3215_FLUSHING; | 
 | 	raw3215_try_io(raw); | 
 | 	raw->flags &= ~RAW3215_FLUSHING; | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct ccw_device_id raw3215_id[] = { | 
 | 	{ CCW_DEVICE(0x3215, 0) }, | 
 | 	{ /* end of list */ }, | 
 | }; | 
 |  | 
 | static struct ccw_driver raw3215_ccw_driver = { | 
 | 	.name		= "3215", | 
 | 	.owner		= THIS_MODULE, | 
 | 	.ids		= raw3215_id, | 
 | 	.probe		= &raw3215_probe, | 
 | 	.remove		= &raw3215_remove, | 
 | 	.set_online	= &raw3215_set_online, | 
 | 	.set_offline	= &raw3215_set_offline, | 
 | 	.freeze		= &raw3215_pm_stop, | 
 | 	.thaw		= &raw3215_pm_start, | 
 | 	.restore	= &raw3215_pm_start, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_TN3215_CONSOLE | 
 | /* | 
 |  * Write a string to the 3215 console | 
 |  */ | 
 | static void con3215_write(struct console *co, const char *str, | 
 | 			  unsigned int count) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	int i; | 
 |  | 
 | 	if (count <= 0) | 
 | 		return; | 
 | 	raw = raw3215[0];	/* console 3215 is the first one */ | 
 | 	while (count > 0) { | 
 | 		for (i = 0; i < count; i++) | 
 | 			if (str[i] == '\t' || str[i] == '\n') | 
 | 				break; | 
 | 		raw3215_write(raw, str, i); | 
 | 		count -= i; | 
 | 		str += i; | 
 | 		if (count > 0) { | 
 | 			raw3215_putchar(raw, *str); | 
 | 			count--; | 
 | 			str++; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static struct tty_driver *con3215_device(struct console *c, int *index) | 
 | { | 
 | 	*index = c->index; | 
 | 	return tty3215_driver; | 
 | } | 
 |  | 
 | /* | 
 |  * panic() calls con3215_flush through a panic_notifier | 
 |  * before the system enters a disabled, endless loop. | 
 |  */ | 
 | static void con3215_flush(void) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw = raw3215[0];  /* console 3215 is the first one */ | 
 | 	if (raw->flags & RAW3215_FROZEN) | 
 | 		/* The console is still frozen for suspend. */ | 
 | 		if (ccw_device_force_console()) | 
 | 			/* Forcing didn't work, no panic message .. */ | 
 | 			return; | 
 | 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE); | 
 | 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | } | 
 |  | 
 | static int con3215_notify(struct notifier_block *self, | 
 | 			  unsigned long event, void *data) | 
 | { | 
 | 	con3215_flush(); | 
 | 	return NOTIFY_OK; | 
 | } | 
 |  | 
 | static struct notifier_block on_panic_nb = { | 
 | 	.notifier_call = con3215_notify, | 
 | 	.priority = 0, | 
 | }; | 
 |  | 
 | static struct notifier_block on_reboot_nb = { | 
 | 	.notifier_call = con3215_notify, | 
 | 	.priority = 0, | 
 | }; | 
 |  | 
 | /* | 
 |  *  The console structure for the 3215 console | 
 |  */ | 
 | static struct console con3215 = { | 
 | 	.name	 = "ttyS", | 
 | 	.write	 = con3215_write, | 
 | 	.device	 = con3215_device, | 
 | 	.flags	 = CON_PRINTBUFFER, | 
 | }; | 
 |  | 
 | /* | 
 |  * 3215 console initialization code called from console_init(). | 
 |  */ | 
 | static int __init con3215_init(void) | 
 | { | 
 | 	struct ccw_device *cdev; | 
 | 	struct raw3215_info *raw; | 
 | 	struct raw3215_req *req; | 
 | 	int i; | 
 |  | 
 | 	/* Check if 3215 is to be the console */ | 
 | 	if (!CONSOLE_IS_3215) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Set the console mode for VM */ | 
 | 	if (MACHINE_IS_VM) { | 
 | 		cpcmd("TERM CONMODE 3215", NULL, 0, NULL); | 
 | 		cpcmd("TERM AUTOCR OFF", NULL, 0, NULL); | 
 | 	} | 
 |  | 
 | 	/* allocate 3215 request structures */ | 
 | 	raw3215_freelist = NULL; | 
 | 	spin_lock_init(&raw3215_freelist_lock); | 
 | 	for (i = 0; i < NR_3215_REQ; i++) { | 
 | 		req = kzalloc(sizeof(struct raw3215_req), GFP_KERNEL | GFP_DMA); | 
 | 		req->next = raw3215_freelist; | 
 | 		raw3215_freelist = req; | 
 | 	} | 
 |  | 
 | 	cdev = ccw_device_probe_console(); | 
 | 	if (IS_ERR(cdev)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	raw3215[0] = raw = (struct raw3215_info *) | 
 | 		kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA); | 
 | 	raw->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA); | 
 | 	raw->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA); | 
 | 	raw->cdev = cdev; | 
 | 	dev_set_drvdata(&cdev->dev, raw); | 
 | 	cdev->handler = raw3215_irq; | 
 |  | 
 | 	raw->flags |= RAW3215_FIXED; | 
 | 	init_waitqueue_head(&raw->empty_wait); | 
 |  | 
 | 	/* Request the console irq */ | 
 | 	if (raw3215_startup(raw) != 0) { | 
 | 		kfree(raw->inbuf); | 
 | 		kfree(raw->buffer); | 
 | 		kfree(raw); | 
 | 		raw3215[0] = NULL; | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	atomic_notifier_chain_register(&panic_notifier_list, &on_panic_nb); | 
 | 	register_reboot_notifier(&on_reboot_nb); | 
 | 	register_console(&con3215); | 
 | 	return 0; | 
 | } | 
 | console_initcall(con3215_init); | 
 | #endif | 
 |  | 
 | /* | 
 |  * tty3215_open | 
 |  * | 
 |  * This routine is called whenever a 3215 tty is opened. | 
 |  */ | 
 | static int tty3215_open(struct tty_struct *tty, struct file * filp) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	int retval, line; | 
 |  | 
 | 	line = tty->index; | 
 | 	if ((line < 0) || (line >= NR_3215)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	raw = raw3215[line]; | 
 | 	if (raw == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	tty->driver_data = raw; | 
 | 	raw->tty = tty; | 
 |  | 
 | 	tty->low_latency = 0;  /* don't use bottom half for pushing chars */ | 
 | 	/* | 
 | 	 * Start up 3215 device | 
 | 	 */ | 
 | 	retval = raw3215_startup(raw); | 
 | 	if (retval) | 
 | 		return retval; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * tty3215_close() | 
 |  * | 
 |  * This routine is called when the 3215 tty is closed. We wait | 
 |  * for the remaining request to be completed. Then we clean up. | 
 |  */ | 
 | static void tty3215_close(struct tty_struct *tty, struct file * filp) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	if (raw == NULL || tty->count > 1) | 
 | 		return; | 
 | 	tty->closing = 1; | 
 | 	/* Shutdown the terminal */ | 
 | 	raw3215_shutdown(raw); | 
 | 	tty->closing = 0; | 
 | 	raw->tty = NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns the amount of free space in the output buffer. | 
 |  */ | 
 | static int tty3215_write_room(struct tty_struct *tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 |  | 
 | 	/* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */ | 
 | 	if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0) | 
 | 		return RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE; | 
 | 	else | 
 | 		return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * String write routine for 3215 ttys | 
 |  */ | 
 | static int tty3215_write(struct tty_struct * tty, | 
 | 			 const unsigned char *buf, int count) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	if (!tty) | 
 | 		return 0; | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	raw3215_write(raw, buf, count); | 
 | 	return count; | 
 | } | 
 |  | 
 | /* | 
 |  * Put character routine for 3215 ttys | 
 |  */ | 
 | static int tty3215_put_char(struct tty_struct *tty, unsigned char ch) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	if (!tty) | 
 | 		return 0; | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	raw3215_putchar(raw, ch); | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void tty3215_flush_chars(struct tty_struct *tty) | 
 | { | 
 | } | 
 |  | 
 | /* | 
 |  * Returns the number of characters in the output buffer | 
 |  */ | 
 | static int tty3215_chars_in_buffer(struct tty_struct *tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	return raw->count; | 
 | } | 
 |  | 
 | static void tty3215_flush_buffer(struct tty_struct *tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	raw3215_flush_buffer(raw); | 
 | 	tty_wakeup(tty); | 
 | } | 
 |  | 
 | /* | 
 |  * Disable reading from a 3215 tty | 
 |  */ | 
 | static void tty3215_throttle(struct tty_struct * tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	raw->flags |= RAW3215_THROTTLED; | 
 | } | 
 |  | 
 | /* | 
 |  * Enable reading from a 3215 tty | 
 |  */ | 
 | static void tty3215_unthrottle(struct tty_struct * tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	if (raw->flags & RAW3215_THROTTLED) { | 
 | 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 		raw->flags &= ~RAW3215_THROTTLED; | 
 | 		raw3215_try_io(raw); | 
 | 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Disable writing to a 3215 tty | 
 |  */ | 
 | static void tty3215_stop(struct tty_struct *tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	raw->flags |= RAW3215_STOPPED; | 
 | } | 
 |  | 
 | /* | 
 |  * Enable writing to a 3215 tty | 
 |  */ | 
 | static void tty3215_start(struct tty_struct *tty) | 
 | { | 
 | 	struct raw3215_info *raw; | 
 | 	unsigned long flags; | 
 |  | 
 | 	raw = (struct raw3215_info *) tty->driver_data; | 
 | 	if (raw->flags & RAW3215_STOPPED) { | 
 | 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags); | 
 | 		raw->flags &= ~RAW3215_STOPPED; | 
 | 		raw3215_try_io(raw); | 
 | 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags); | 
 | 	} | 
 | } | 
 |  | 
 | static const struct tty_operations tty3215_ops = { | 
 | 	.open = tty3215_open, | 
 | 	.close = tty3215_close, | 
 | 	.write = tty3215_write, | 
 | 	.put_char = tty3215_put_char, | 
 | 	.flush_chars = tty3215_flush_chars, | 
 | 	.write_room = tty3215_write_room, | 
 | 	.chars_in_buffer = tty3215_chars_in_buffer, | 
 | 	.flush_buffer = tty3215_flush_buffer, | 
 | 	.throttle = tty3215_throttle, | 
 | 	.unthrottle = tty3215_unthrottle, | 
 | 	.stop = tty3215_stop, | 
 | 	.start = tty3215_start, | 
 | }; | 
 |  | 
 | /* | 
 |  * 3215 tty registration code called from tty_init(). | 
 |  * Most kernel services (incl. kmalloc) are available at this poimt. | 
 |  */ | 
 | static int __init tty3215_init(void) | 
 | { | 
 | 	struct tty_driver *driver; | 
 | 	int ret; | 
 |  | 
 | 	if (!CONSOLE_IS_3215) | 
 | 		return 0; | 
 |  | 
 | 	driver = alloc_tty_driver(NR_3215); | 
 | 	if (!driver) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = ccw_driver_register(&raw3215_ccw_driver); | 
 | 	if (ret) { | 
 | 		put_tty_driver(driver); | 
 | 		return ret; | 
 | 	} | 
 | 	/* | 
 | 	 * Initialize the tty_driver structure | 
 | 	 * Entries in tty3215_driver that are NOT initialized: | 
 | 	 * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc | 
 | 	 */ | 
 |  | 
 | 	driver->owner = THIS_MODULE; | 
 | 	driver->driver_name = "tty3215"; | 
 | 	driver->name = "ttyS"; | 
 | 	driver->major = TTY_MAJOR; | 
 | 	driver->minor_start = 64; | 
 | 	driver->type = TTY_DRIVER_TYPE_SYSTEM; | 
 | 	driver->subtype = SYSTEM_TYPE_TTY; | 
 | 	driver->init_termios = tty_std_termios; | 
 | 	driver->init_termios.c_iflag = IGNBRK | IGNPAR; | 
 | 	driver->init_termios.c_oflag = ONLCR | XTABS; | 
 | 	driver->init_termios.c_lflag = ISIG; | 
 | 	driver->flags = TTY_DRIVER_REAL_RAW; | 
 | 	tty_set_operations(driver, &tty3215_ops); | 
 | 	ret = tty_register_driver(driver); | 
 | 	if (ret) { | 
 | 		put_tty_driver(driver); | 
 | 		return ret; | 
 | 	} | 
 | 	tty3215_driver = driver; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit tty3215_exit(void) | 
 | { | 
 | 	tty_unregister_driver(tty3215_driver); | 
 | 	put_tty_driver(tty3215_driver); | 
 | 	ccw_driver_unregister(&raw3215_ccw_driver); | 
 | } | 
 |  | 
 | module_init(tty3215_init); | 
 | module_exit(tty3215_exit); |