| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * arch/arm/mach-dove/cm-a510.c |
| * |
| * Copyright (C) 2010 CompuLab, Ltd. |
| * Konstantin Sinyuk <kostyas@compulab.co.il> |
| * |
| * Based on Marvell DB-MV88AP510-BP Development Board Setup |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/ata_platform.h> |
| #include <linux/mv643xx_eth.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/flash.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| |
| #include "dove.h" |
| #include "common.h" |
| |
| static struct mv643xx_eth_platform_data cm_a510_ge00_data = { |
| .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, |
| }; |
| |
| static struct mv_sata_platform_data cm_a510_sata_data = { |
| .n_ports = 1, |
| }; |
| |
| /* |
| * SPI Devices: |
| * SPI0: 1M Flash Winbond w25q32bv |
| */ |
| static const struct flash_platform_data cm_a510_spi_flash_data = { |
| .type = "w25q32bv", |
| }; |
| |
| static struct spi_board_info __initdata cm_a510_spi_flash_info[] = { |
| { |
| .modalias = "m25p80", |
| .platform_data = &cm_a510_spi_flash_data, |
| .irq = -1, |
| .max_speed_hz = 20000000, |
| .bus_num = 0, |
| .chip_select = 0, |
| }, |
| }; |
| |
| static int __init cm_a510_pci_init(void) |
| { |
| if (machine_is_cm_a510()) |
| dove_pcie_init(1, 1); |
| |
| return 0; |
| } |
| |
| subsys_initcall(cm_a510_pci_init); |
| |
| /* Board Init */ |
| static void __init cm_a510_init(void) |
| { |
| /* |
| * Basic Dove setup. Needs to be called early. |
| */ |
| dove_init(); |
| |
| dove_ge00_init(&cm_a510_ge00_data); |
| dove_ehci0_init(); |
| dove_ehci1_init(); |
| dove_sata_init(&cm_a510_sata_data); |
| dove_sdio0_init(); |
| dove_sdio1_init(); |
| dove_spi0_init(); |
| dove_spi1_init(); |
| dove_uart0_init(); |
| dove_uart1_init(); |
| dove_i2c_init(); |
| spi_register_board_info(cm_a510_spi_flash_info, |
| ARRAY_SIZE(cm_a510_spi_flash_info)); |
| } |
| |
| MACHINE_START(CM_A510, "Compulab CM-A510 Board") |
| .atag_offset = 0x100, |
| .nr_irqs = DOVE_NR_IRQS, |
| .init_machine = cm_a510_init, |
| .map_io = dove_map_io, |
| .init_early = dove_init_early, |
| .init_irq = dove_init_irq, |
| .init_time = dove_timer_init, |
| .restart = dove_restart, |
| MACHINE_END |