| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Procedures for creating, accessing and interpreting the device tree. |
| * |
| * Paul Mackerras August 1996. |
| * Copyright (C) 1996-2005 Paul Mackerras. |
| * |
| * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. |
| * {engebret|bergner}@us.ibm.com |
| * |
| * Adapted for sparc64 by David S. Miller davem@davemloft.net |
| */ |
| |
| #include <linux/memblock.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/cpu.h> |
| #include <linux/mm.h> |
| #include <linux/of.h> |
| |
| #include <asm/prom.h> |
| #include <asm/oplib.h> |
| #include <asm/irq.h> |
| #include <asm/asi.h> |
| #include <asm/upa.h> |
| #include <asm/smp.h> |
| |
| #include "prom.h" |
| |
| void * __init prom_early_alloc(unsigned long size) |
| { |
| void *ret = memblock_alloc(size, SMP_CACHE_BYTES); |
| |
| if (!ret) { |
| prom_printf("prom_early_alloc(%lu) failed\n", size); |
| prom_halt(); |
| } |
| |
| prom_early_allocated += size; |
| |
| return ret; |
| } |
| |
| /* The following routines deal with the black magic of fully naming a |
| * node. |
| * |
| * Certain well known named nodes are just the simple name string. |
| * |
| * Actual devices have an address specifier appended to the base name |
| * string, like this "foo@addr". The "addr" can be in any number of |
| * formats, and the platform plus the type of the node determine the |
| * format and how it is constructed. |
| * |
| * For children of the ROOT node, the naming convention is fixed and |
| * determined by whether this is a sun4u or sun4v system. |
| * |
| * For children of other nodes, it is bus type specific. So |
| * we walk up the tree until we discover a "device_type" property |
| * we recognize and we go from there. |
| * |
| * As an example, the boot device on my workstation has a full path: |
| * |
| * /pci@1e,600000/ide@d/disk@0,0:c |
| */ |
| static void __init sun4v_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom64_registers *regs; |
| struct property *rprop; |
| u32 high_bits, low_bits, type; |
| |
| rprop = of_find_property(dp, "reg", NULL); |
| if (!rprop) |
| return; |
| |
| regs = rprop->value; |
| if (!of_node_is_root(dp->parent)) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| return; |
| } |
| |
| type = regs->phys_addr >> 60UL; |
| high_bits = (regs->phys_addr >> 32UL) & 0x0fffffffUL; |
| low_bits = (regs->phys_addr & 0xffffffffUL); |
| |
| if (type == 0 || type == 8) { |
| const char *prefix = (type == 0) ? "m" : "i"; |
| |
| if (low_bits) |
| sprintf(tmp_buf, "%s@%s%x,%x", |
| name, prefix, |
| high_bits, low_bits); |
| else |
| sprintf(tmp_buf, "%s@%s%x", |
| name, |
| prefix, |
| high_bits); |
| } else if (type == 12) { |
| sprintf(tmp_buf, "%s@%x", |
| name, high_bits); |
| } |
| } |
| |
| static void __init sun4u_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| if (!of_node_is_root(dp->parent)) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| return; |
| } |
| |
| prop = of_find_property(dp, "upa-portid", NULL); |
| if (!prop) |
| prop = of_find_property(dp, "portid", NULL); |
| if (prop) { |
| unsigned long mask = 0xffffffffUL; |
| |
| if (tlb_type >= cheetah) |
| mask = 0x7fffff; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| *(u32 *)prop->value, |
| (unsigned int) (regs->phys_addr & mask)); |
| } |
| } |
| |
| /* "name@slot,offset" */ |
| static void __init sbus_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| regs->which_io, |
| regs->phys_addr); |
| } |
| |
| /* "name@devnum[,func]" */ |
| static void __init pci_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom_pci_registers *regs; |
| struct property *prop; |
| unsigned int devfn; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| devfn = (regs->phys_hi >> 8) & 0xff; |
| if (devfn & 0x07) { |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| devfn >> 3, |
| devfn & 0x07); |
| } else { |
| sprintf(tmp_buf, "%s@%x", |
| name, |
| devfn >> 3); |
| } |
| } |
| |
| /* "name@UPA_PORTID,offset" */ |
| static void __init upa_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| prop = of_find_property(dp, "upa-portid", NULL); |
| if (!prop) |
| return; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| *(u32 *) prop->value, |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| } |
| |
| /* "name@reg" */ |
| static void __init vdev_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| sprintf(tmp_buf, "%s@%x", name, *regs); |
| } |
| |
| /* "name@addrhi,addrlo" */ |
| static void __init ebus_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct linux_prom64_registers *regs; |
| struct property *prop; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, |
| (unsigned int) (regs->phys_addr >> 32UL), |
| (unsigned int) (regs->phys_addr & 0xffffffffUL)); |
| } |
| |
| /* "name@bus,addr" */ |
| static void __init i2c_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| /* This actually isn't right... should look at the #address-cells |
| * property of the i2c bus node etc. etc. |
| */ |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, regs[0], regs[1]); |
| } |
| |
| /* "name@reg0[,reg1]" */ |
| static void __init usb_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| if (prop->length == sizeof(u32) || regs[1] == 1) { |
| sprintf(tmp_buf, "%s@%x", |
| name, regs[0]); |
| } else { |
| sprintf(tmp_buf, "%s@%x,%x", |
| name, regs[0], regs[1]); |
| } |
| } |
| |
| /* "name@reg0reg1[,reg2reg3]" */ |
| static void __init ieee1394_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| struct property *prop; |
| u32 *regs; |
| |
| prop = of_find_property(dp, "reg", NULL); |
| if (!prop) |
| return; |
| |
| regs = prop->value; |
| |
| if (regs[2] || regs[3]) { |
| sprintf(tmp_buf, "%s@%08x%08x,%04x%08x", |
| name, regs[0], regs[1], regs[2], regs[3]); |
| } else { |
| sprintf(tmp_buf, "%s@%08x%08x", |
| name, regs[0], regs[1]); |
| } |
| } |
| |
| static void __init __build_path_component(struct device_node *dp, char *tmp_buf) |
| { |
| struct device_node *parent = dp->parent; |
| |
| if (parent != NULL) { |
| if (of_node_is_type(parent, "pci") || |
| of_node_is_type(parent, "pciex")) { |
| pci_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "sbus")) { |
| sbus_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "upa")) { |
| upa_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "ebus")) { |
| ebus_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_name_eq(parent, "usb") || |
| of_node_name_eq(parent, "hub")) { |
| usb_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "i2c")) { |
| i2c_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "firewire")) { |
| ieee1394_path_component(dp, tmp_buf); |
| return; |
| } |
| if (of_node_is_type(parent, "virtual-devices")) { |
| vdev_path_component(dp, tmp_buf); |
| return; |
| } |
| /* "isa" is handled with platform naming */ |
| } |
| |
| /* Use platform naming convention. */ |
| if (tlb_type == hypervisor) { |
| sun4v_path_component(dp, tmp_buf); |
| return; |
| } else { |
| sun4u_path_component(dp, tmp_buf); |
| } |
| } |
| |
| char * __init build_path_component(struct device_node *dp) |
| { |
| const char *name = of_get_property(dp, "name", NULL); |
| char tmp_buf[64], *n; |
| |
| tmp_buf[0] = '\0'; |
| __build_path_component(dp, tmp_buf); |
| if (tmp_buf[0] == '\0') |
| strcpy(tmp_buf, name); |
| |
| n = prom_early_alloc(strlen(tmp_buf) + 1); |
| strcpy(n, tmp_buf); |
| |
| return n; |
| } |
| |
| static const char *get_mid_prop(void) |
| { |
| return (tlb_type == spitfire ? "upa-portid" : "portid"); |
| } |
| |
| bool arch_find_n_match_cpu_physical_id(struct device_node *cpun, |
| int cpu, unsigned int *thread) |
| { |
| const char *mid_prop = get_mid_prop(); |
| int this_cpu_id; |
| |
| /* On hypervisor based platforms we interrogate the 'reg' |
| * property. On everything else we look for a 'upa-portid', |
| * 'portid', or 'cpuid' property. |
| */ |
| |
| if (tlb_type == hypervisor) { |
| struct property *prop = of_find_property(cpun, "reg", NULL); |
| u32 *regs; |
| |
| if (!prop) { |
| pr_warn("CPU node missing reg property\n"); |
| return false; |
| } |
| regs = prop->value; |
| this_cpu_id = regs[0] & 0x0fffffff; |
| } else { |
| this_cpu_id = of_getintprop_default(cpun, mid_prop, -1); |
| |
| if (this_cpu_id < 0) { |
| mid_prop = "cpuid"; |
| this_cpu_id = of_getintprop_default(cpun, mid_prop, -1); |
| } |
| if (this_cpu_id < 0) { |
| pr_warn("CPU node missing cpu ID property\n"); |
| return false; |
| } |
| } |
| if (this_cpu_id == cpu) { |
| if (thread) { |
| int proc_id = cpu_data(cpu).proc_id; |
| |
| /* On sparc64, the cpu thread information is obtained |
| * either from OBP or the machine description. We've |
| * actually probed this information already long before |
| * this interface gets called so instead of interrogating |
| * both the OF node and the MDESC again, just use what |
| * we discovered already. |
| */ |
| if (proc_id < 0) |
| proc_id = 0; |
| *thread = proc_id; |
| } |
| return true; |
| } |
| return false; |
| } |
| |
| static void *of_iterate_over_cpus(void *(*func)(struct device_node *, int, int), int arg) |
| { |
| struct device_node *dp; |
| const char *mid_prop; |
| |
| mid_prop = get_mid_prop(); |
| for_each_node_by_type(dp, "cpu") { |
| int cpuid = of_getintprop_default(dp, mid_prop, -1); |
| const char *this_mid_prop = mid_prop; |
| void *ret; |
| |
| if (cpuid < 0) { |
| this_mid_prop = "cpuid"; |
| cpuid = of_getintprop_default(dp, this_mid_prop, -1); |
| } |
| if (cpuid < 0) { |
| prom_printf("OF: Serious problem, cpu lacks " |
| "%s property", this_mid_prop); |
| prom_halt(); |
| } |
| #ifdef CONFIG_SMP |
| if (cpuid >= NR_CPUS) { |
| printk(KERN_WARNING "Ignoring CPU %d which is " |
| ">= NR_CPUS (%d)\n", |
| cpuid, NR_CPUS); |
| continue; |
| } |
| #endif |
| ret = func(dp, cpuid, arg); |
| if (ret) |
| return ret; |
| } |
| return NULL; |
| } |
| |
| static void *check_cpu_node(struct device_node *dp, int cpuid, int id) |
| { |
| if (id == cpuid) |
| return dp; |
| return NULL; |
| } |
| |
| struct device_node *of_find_node_by_cpuid(int cpuid) |
| { |
| return of_iterate_over_cpus(check_cpu_node, cpuid); |
| } |
| |
| static void *record_one_cpu(struct device_node *dp, int cpuid, int arg) |
| { |
| ncpus_probed++; |
| #ifdef CONFIG_SMP |
| set_cpu_present(cpuid, true); |
| |
| if (num_possible_cpus() < nr_cpu_ids) |
| set_cpu_possible(cpuid, true); |
| #endif |
| return NULL; |
| } |
| |
| void __init of_populate_present_mask(void) |
| { |
| if (tlb_type == hypervisor) |
| return; |
| |
| ncpus_probed = 0; |
| of_iterate_over_cpus(record_one_cpu, 0); |
| } |
| |
| static void *fill_in_one_cpu(struct device_node *dp, int cpuid, int arg) |
| { |
| struct device_node *portid_parent = NULL; |
| int portid = -1; |
| |
| if (of_property_present(dp, "cpuid")) { |
| int limit = 2; |
| |
| portid_parent = dp; |
| while (limit--) { |
| portid_parent = portid_parent->parent; |
| if (!portid_parent) |
| break; |
| portid = of_getintprop_default(portid_parent, |
| "portid", -1); |
| if (portid >= 0) |
| break; |
| } |
| } |
| |
| #ifndef CONFIG_SMP |
| /* On uniprocessor we only want the values for the |
| * real physical cpu the kernel booted onto, however |
| * cpu_data() only has one entry at index 0. |
| */ |
| if (cpuid != real_hard_smp_processor_id()) |
| return NULL; |
| cpuid = 0; |
| #endif |
| |
| cpu_data(cpuid).clock_tick = |
| of_getintprop_default(dp, "clock-frequency", 0); |
| |
| if (portid_parent) { |
| cpu_data(cpuid).dcache_size = |
| of_getintprop_default(dp, "l1-dcache-size", |
| 16 * 1024); |
| cpu_data(cpuid).dcache_line_size = |
| of_getintprop_default(dp, "l1-dcache-line-size", |
| 32); |
| cpu_data(cpuid).icache_size = |
| of_getintprop_default(dp, "l1-icache-size", |
| 8 * 1024); |
| cpu_data(cpuid).icache_line_size = |
| of_getintprop_default(dp, "l1-icache-line-size", |
| 32); |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(dp, "l2-cache-size", 0); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(dp, "l2-cache-line-size", 0); |
| if (!cpu_data(cpuid).ecache_size || |
| !cpu_data(cpuid).ecache_line_size) { |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(portid_parent, |
| "l2-cache-size", |
| (4 * 1024 * 1024)); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(portid_parent, |
| "l2-cache-line-size", 64); |
| } |
| |
| cpu_data(cpuid).core_id = portid + 1; |
| cpu_data(cpuid).proc_id = portid; |
| } else { |
| cpu_data(cpuid).dcache_size = |
| of_getintprop_default(dp, "dcache-size", 16 * 1024); |
| cpu_data(cpuid).dcache_line_size = |
| of_getintprop_default(dp, "dcache-line-size", 32); |
| |
| cpu_data(cpuid).icache_size = |
| of_getintprop_default(dp, "icache-size", 16 * 1024); |
| cpu_data(cpuid).icache_line_size = |
| of_getintprop_default(dp, "icache-line-size", 32); |
| |
| cpu_data(cpuid).ecache_size = |
| of_getintprop_default(dp, "ecache-size", |
| (4 * 1024 * 1024)); |
| cpu_data(cpuid).ecache_line_size = |
| of_getintprop_default(dp, "ecache-line-size", 64); |
| |
| cpu_data(cpuid).core_id = 0; |
| cpu_data(cpuid).proc_id = -1; |
| } |
| |
| return NULL; |
| } |
| |
| void __init of_fill_in_cpu_data(void) |
| { |
| if (tlb_type == hypervisor) |
| return; |
| |
| of_iterate_over_cpus(fill_in_one_cpu, 0); |
| |
| smp_fill_in_sib_core_maps(); |
| } |
| |
| void __init of_console_init(void) |
| { |
| char *msg = "OF stdout device is: %s\n"; |
| struct device_node *dp; |
| phandle node; |
| |
| of_console_path = prom_early_alloc(256); |
| if (prom_ihandle2path(prom_stdout, of_console_path, 256) < 0) { |
| prom_printf("Cannot obtain path of stdout.\n"); |
| prom_halt(); |
| } |
| of_console_options = strrchr(of_console_path, ':'); |
| if (of_console_options) { |
| of_console_options++; |
| if (*of_console_options == '\0') |
| of_console_options = NULL; |
| } |
| |
| node = prom_inst2pkg(prom_stdout); |
| if (!node) { |
| prom_printf("Cannot resolve stdout node from " |
| "instance %08x.\n", prom_stdout); |
| prom_halt(); |
| } |
| |
| dp = of_find_node_by_phandle(node); |
| |
| if (!of_node_is_type(dp, "display") && !of_node_is_type(dp, "serial")) { |
| prom_printf("Console device_type is neither display " |
| "nor serial.\n"); |
| prom_halt(); |
| } |
| |
| of_console_device = dp; |
| |
| printk(msg, of_console_path); |
| } |