blob: 63dab914a48de9ff3c297ff57a2295828b7b4484 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Socionext UniPhier USB2 PHY
description: |
This describes the devicetree bindings for PHY interface built into
USB2 controller implemented on Socionext UniPhier SoCs.
Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
controller doesn't include its own High-Speed PHY. This needs to specify
USB2 PHY instead of USB3 HS-PHY.
maintainers:
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
properties:
compatible:
enum:
- socionext,uniphier-pro4-usb2-phy
- socionext,uniphier-ld11-usb2-phy
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^phy@[0-9]+$":
type: object
additionalProperties: false
properties:
reg:
minimum: 0
maximum: 3
description:
The ID number for the PHY
"#phy-cells":
const: 0
vbus-supply:
description: A phandle to the regulator for USB VBUS, only for USB host
required:
- reg
- "#phy-cells"
required:
- compatible
- "#address-cells"
- "#size-cells"
additionalProperties: false
examples:
- |
// The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
soc-glue@5f800000 {
compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
usb-controller {
compatible = "socionext,uniphier-ld11-usb2-phy";
#address-cells = <1>;
#size-cells = <0>;
usb_phy0: phy@0 {
reg = <0>;
#phy-cells = <0>;
};
usb_phy1: phy@1 {
reg = <1>;
#phy-cells = <0>;
};
usb_phy2: phy@2 {
reg = <2>;
#phy-cells = <0>;
};
};
};