| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * GPIO interface for Intel Poulsbo SCH |
| * |
| * Copyright (c) 2010 CompuLab Ltd |
| * Author: Denis Turischev <denis@compulab.co.il> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci_ids.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| |
| #define GEN 0x00 |
| #define GIO 0x04 |
| #define GLV 0x08 |
| #define GTPE 0x0c |
| #define GTNE 0x10 |
| #define GGPE 0x14 |
| #define GSMI 0x18 |
| #define GTS 0x1c |
| |
| #define CORE_BANK_OFFSET 0x00 |
| #define RESUME_BANK_OFFSET 0x20 |
| |
| /* |
| * iLB datasheet describes GPE0BLK registers, in particular GPE0E.GPIO bit. |
| * Document Number: 328195-001 |
| */ |
| #define GPE0E_GPIO 14 |
| |
| struct sch_gpio { |
| struct gpio_chip chip; |
| spinlock_t lock; |
| unsigned short iobase; |
| unsigned short resume_base; |
| |
| /* GPE handling */ |
| u32 gpe; |
| acpi_gpe_handler gpe_handler; |
| }; |
| |
| static unsigned int sch_gpio_offset(struct sch_gpio *sch, unsigned int gpio, |
| unsigned int reg) |
| { |
| unsigned int base = CORE_BANK_OFFSET; |
| |
| if (gpio >= sch->resume_base) { |
| gpio -= sch->resume_base; |
| base = RESUME_BANK_OFFSET; |
| } |
| |
| return base + reg + gpio / 8; |
| } |
| |
| static unsigned int sch_gpio_bit(struct sch_gpio *sch, unsigned int gpio) |
| { |
| if (gpio >= sch->resume_base) |
| gpio -= sch->resume_base; |
| return gpio % 8; |
| } |
| |
| static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned int gpio, unsigned int reg) |
| { |
| unsigned short offset, bit; |
| u8 reg_val; |
| |
| offset = sch_gpio_offset(sch, gpio, reg); |
| bit = sch_gpio_bit(sch, gpio); |
| |
| reg_val = !!(inb(sch->iobase + offset) & BIT(bit)); |
| |
| return reg_val; |
| } |
| |
| static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned int gpio, unsigned int reg, |
| int val) |
| { |
| unsigned short offset, bit; |
| u8 reg_val; |
| |
| offset = sch_gpio_offset(sch, gpio, reg); |
| bit = sch_gpio_bit(sch, gpio); |
| |
| reg_val = inb(sch->iobase + offset); |
| |
| if (val) |
| outb(reg_val | BIT(bit), sch->iobase + offset); |
| else |
| outb((reg_val & ~BIT(bit)), sch->iobase + offset); |
| } |
| |
| static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned int gpio_num) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| sch_gpio_reg_set(sch, gpio_num, GIO, 1); |
| spin_unlock_irqrestore(&sch->lock, flags); |
| return 0; |
| } |
| |
| static int sch_gpio_get(struct gpio_chip *gc, unsigned int gpio_num) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| |
| return sch_gpio_reg_get(sch, gpio_num, GLV); |
| } |
| |
| static void sch_gpio_set(struct gpio_chip *gc, unsigned int gpio_num, int val) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| sch_gpio_reg_set(sch, gpio_num, GLV, val); |
| spin_unlock_irqrestore(&sch->lock, flags); |
| } |
| |
| static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num, |
| int val) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| sch_gpio_reg_set(sch, gpio_num, GIO, 0); |
| spin_unlock_irqrestore(&sch->lock, flags); |
| |
| /* |
| * according to the datasheet, writing to the level register has no |
| * effect when GPIO is programmed as input. |
| * Actually the level register is read-only when configured as input. |
| * Thus presetting the output level before switching to output is _NOT_ possible. |
| * Hence we set the level after configuring the GPIO as output. |
| * But we cannot prevent a short low pulse if direction is set to high |
| * and an external pull-up is connected. |
| */ |
| sch_gpio_set(gc, gpio_num, val); |
| return 0; |
| } |
| |
| static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio_num) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| |
| if (sch_gpio_reg_get(sch, gpio_num, GIO)) |
| return GPIO_LINE_DIRECTION_IN; |
| |
| return GPIO_LINE_DIRECTION_OUT; |
| } |
| |
| static const struct gpio_chip sch_gpio_chip = { |
| .label = "sch_gpio", |
| .owner = THIS_MODULE, |
| .direction_input = sch_gpio_direction_in, |
| .get = sch_gpio_get, |
| .direction_output = sch_gpio_direction_out, |
| .set = sch_gpio_set, |
| .get_direction = sch_gpio_get_direction, |
| }; |
| |
| static int sch_irq_type(struct irq_data *d, unsigned int type) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| irq_hw_number_t gpio_num = irqd_to_hwirq(d); |
| unsigned long flags; |
| int rising, falling; |
| |
| switch (type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_EDGE_RISING: |
| rising = 1; |
| falling = 0; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| rising = 0; |
| falling = 1; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| rising = 1; |
| falling = 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| |
| sch_gpio_reg_set(sch, gpio_num, GTPE, rising); |
| sch_gpio_reg_set(sch, gpio_num, GTNE, falling); |
| |
| irq_set_handler_locked(d, handle_edge_irq); |
| |
| spin_unlock_irqrestore(&sch->lock, flags); |
| |
| return 0; |
| } |
| |
| static void sch_irq_ack(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| irq_hw_number_t gpio_num = irqd_to_hwirq(d); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| sch_gpio_reg_set(sch, gpio_num, GTS, 1); |
| spin_unlock_irqrestore(&sch->lock, flags); |
| } |
| |
| static void sch_irq_mask_unmask(struct gpio_chip *gc, irq_hw_number_t gpio_num, int val) |
| { |
| struct sch_gpio *sch = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| sch_gpio_reg_set(sch, gpio_num, GGPE, val); |
| spin_unlock_irqrestore(&sch->lock, flags); |
| } |
| |
| static void sch_irq_mask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| irq_hw_number_t gpio_num = irqd_to_hwirq(d); |
| |
| sch_irq_mask_unmask(gc, gpio_num, 0); |
| gpiochip_disable_irq(gc, gpio_num); |
| } |
| |
| static void sch_irq_unmask(struct irq_data *d) |
| { |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); |
| irq_hw_number_t gpio_num = irqd_to_hwirq(d); |
| |
| gpiochip_enable_irq(gc, gpio_num); |
| sch_irq_mask_unmask(gc, gpio_num, 1); |
| } |
| |
| static const struct irq_chip sch_irqchip = { |
| .name = "sch_gpio", |
| .irq_ack = sch_irq_ack, |
| .irq_mask = sch_irq_mask, |
| .irq_unmask = sch_irq_unmask, |
| .irq_set_type = sch_irq_type, |
| .flags = IRQCHIP_IMMUTABLE, |
| GPIOCHIP_IRQ_RESOURCE_HELPERS, |
| }; |
| |
| static u32 sch_gpio_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context) |
| { |
| struct sch_gpio *sch = context; |
| struct gpio_chip *gc = &sch->chip; |
| unsigned long core_status, resume_status; |
| unsigned long pending; |
| unsigned long flags; |
| int offset; |
| u32 ret; |
| |
| spin_lock_irqsave(&sch->lock, flags); |
| |
| core_status = inl(sch->iobase + CORE_BANK_OFFSET + GTS); |
| resume_status = inl(sch->iobase + RESUME_BANK_OFFSET + GTS); |
| |
| spin_unlock_irqrestore(&sch->lock, flags); |
| |
| pending = (resume_status << sch->resume_base) | core_status; |
| for_each_set_bit(offset, &pending, sch->chip.ngpio) |
| generic_handle_domain_irq(gc->irq.domain, offset); |
| |
| /* Set returning value depending on whether we handled an interrupt */ |
| ret = pending ? ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED; |
| |
| /* Acknowledge GPE to ACPICA */ |
| ret |= ACPI_REENABLE_GPE; |
| |
| return ret; |
| } |
| |
| static void sch_gpio_remove_gpe_handler(void *data) |
| { |
| struct sch_gpio *sch = data; |
| |
| acpi_disable_gpe(NULL, sch->gpe); |
| acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler); |
| } |
| |
| static int sch_gpio_install_gpe_handler(struct sch_gpio *sch) |
| { |
| struct device *dev = sch->chip.parent; |
| acpi_status status; |
| |
| status = acpi_install_gpe_handler(NULL, sch->gpe, ACPI_GPE_LEVEL_TRIGGERED, |
| sch->gpe_handler, sch); |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, "Failed to install GPE handler for %u: %s\n", |
| sch->gpe, acpi_format_exception(status)); |
| return -ENODEV; |
| } |
| |
| status = acpi_enable_gpe(NULL, sch->gpe); |
| if (ACPI_FAILURE(status)) { |
| dev_err(dev, "Failed to enable GPE handler for %u: %s\n", |
| sch->gpe, acpi_format_exception(status)); |
| acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler); |
| return -ENODEV; |
| } |
| |
| return devm_add_action_or_reset(dev, sch_gpio_remove_gpe_handler, sch); |
| } |
| |
| static int sch_gpio_probe(struct platform_device *pdev) |
| { |
| struct gpio_irq_chip *girq; |
| struct sch_gpio *sch; |
| struct resource *res; |
| int ret; |
| |
| sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL); |
| if (!sch) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (!res) |
| return -EBUSY; |
| |
| if (!devm_request_region(&pdev->dev, res->start, resource_size(res), |
| pdev->name)) |
| return -EBUSY; |
| |
| spin_lock_init(&sch->lock); |
| sch->iobase = res->start; |
| sch->chip = sch_gpio_chip; |
| sch->chip.label = dev_name(&pdev->dev); |
| sch->chip.parent = &pdev->dev; |
| |
| switch (pdev->id) { |
| case PCI_DEVICE_ID_INTEL_SCH_LPC: |
| sch->resume_base = 10; |
| sch->chip.ngpio = 14; |
| |
| /* |
| * GPIO[6:0] enabled by default |
| * GPIO7 is configured by the CMC as SLPIOVR |
| * Enable GPIO[9:8] core powered gpios explicitly |
| */ |
| sch_gpio_reg_set(sch, 8, GEN, 1); |
| sch_gpio_reg_set(sch, 9, GEN, 1); |
| /* |
| * SUS_GPIO[2:0] enabled by default |
| * Enable SUS_GPIO3 resume powered gpio explicitly |
| */ |
| sch_gpio_reg_set(sch, 13, GEN, 1); |
| break; |
| |
| case PCI_DEVICE_ID_INTEL_ITC_LPC: |
| sch->resume_base = 5; |
| sch->chip.ngpio = 14; |
| break; |
| |
| case PCI_DEVICE_ID_INTEL_CENTERTON_ILB: |
| sch->resume_base = 21; |
| sch->chip.ngpio = 30; |
| break; |
| |
| case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB: |
| sch->resume_base = 2; |
| sch->chip.ngpio = 8; |
| break; |
| |
| default: |
| return -ENODEV; |
| } |
| |
| platform_set_drvdata(pdev, sch); |
| |
| girq = &sch->chip.irq; |
| gpio_irq_chip_set_chip(girq, &sch_irqchip); |
| girq->num_parents = 0; |
| girq->parents = NULL; |
| girq->parent_handler = NULL; |
| girq->default_type = IRQ_TYPE_NONE; |
| girq->handler = handle_bad_irq; |
| |
| /* GPE setup is optional */ |
| sch->gpe = GPE0E_GPIO; |
| sch->gpe_handler = sch_gpio_gpe_handler; |
| |
| ret = sch_gpio_install_gpe_handler(sch); |
| if (ret) |
| dev_warn(&pdev->dev, "Can't setup GPE, no IRQ support\n"); |
| |
| return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch); |
| } |
| |
| static struct platform_driver sch_gpio_driver = { |
| .driver = { |
| .name = "sch_gpio", |
| }, |
| .probe = sch_gpio_probe, |
| }; |
| |
| module_platform_driver(sch_gpio_driver); |
| |
| MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); |
| MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:sch_gpio"); |