blob: 56483860306b4b2970aa9ab654444a122fb7f82f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2021, ASPEED Technology Inc.
// Authors: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <drm/drm_print.h>
#include "ast_drv.h"
int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata)
{
struct ast_private *ast = to_ast_private(dev);
u8 i = 0, j = 0;
/*
* CRD1[b5]: DP MCU FW is executing
* CRDC[b0]: DP link success
* CRDF[b0]: DP HPD
* CRE5[b0]: Host reading EDID process is done
*/
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, ASTDP_MCU_FW_EXECUTING) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, ASTDP_LINK_SUCCESS) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5,
ASTDP_HOST_EDID_READ_DONE_MASK))) {
goto err_astdp_edid_not_ready;
}
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, (u8) ~ASTDP_HOST_EDID_READ_DONE_MASK,
0x00);
for (i = 0; i < 32; i++) {
/*
* CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64
*/
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE4,
ASTDP_AND_CLEAR_MASK, (u8)i);
j = 0;
/*
* CRD7[b0]: valid flag for EDID
* CRD6[b0]: mirror read pointer for EDID
*/
while ((ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD7,
ASTDP_EDID_VALID_FLAG_MASK) != 0x01) ||
(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD6,
ASTDP_EDID_READ_POINTER_MASK) != i)) {
/*
* Delay are getting longer with each retry.
* 1. The Delays are often 2 loops when users request "Display Settings"
* of right-click of mouse.
* 2. The Delays are often longer a lot when system resume from S3/S4.
*/
mdelay(j+1);
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1,
ASTDP_MCU_FW_EXECUTING) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC,
ASTDP_LINK_SUCCESS) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD))) {
goto err_astdp_jump_out_loop_of_edid;
}
j++;
if (j > 200)
goto err_astdp_jump_out_loop_of_edid;
}
*(ediddata) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT,
0xD8, ASTDP_EDID_READ_DATA_MASK);
*(ediddata + 1) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD9,
ASTDP_EDID_READ_DATA_MASK);
*(ediddata + 2) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDA,
ASTDP_EDID_READ_DATA_MASK);
*(ediddata + 3) = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDB,
ASTDP_EDID_READ_DATA_MASK);
if (i == 31) {
/*
* For 128-bytes EDID_1.3,
* 1. Add the value of Bytes-126 to Bytes-127.
* The Bytes-127 is Checksum. Sum of all 128bytes should
* equal 0 (mod 256).
* 2. Modify Bytes-126 to be 0.
* The Bytes-126 indicates the Number of extensions to
* follow. 0 represents noextensions.
*/
*(ediddata + 3) = *(ediddata + 3) + *(ediddata + 2);
*(ediddata + 2) = 0;
}
ediddata += 4;
}
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, (u8) ~ASTDP_HOST_EDID_READ_DONE_MASK,
ASTDP_HOST_EDID_READ_DONE);
return 0;
err_astdp_jump_out_loop_of_edid:
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5,
(u8) ~ASTDP_HOST_EDID_READ_DONE_MASK,
ASTDP_HOST_EDID_READ_DONE);
return (~(j+256) + 1);
err_astdp_edid_not_ready:
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, ASTDP_MCU_FW_EXECUTING)))
return (~0xD1 + 1);
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, ASTDP_LINK_SUCCESS)))
return (~0xDC + 1);
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD)))
return (~0xDF + 1);
if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, ASTDP_HOST_EDID_READ_DONE_MASK)))
return (~0xE5 + 1);
return 0;
}
/*
* Launch Aspeed DP
*/
void ast_dp_launch(struct drm_device *dev, u8 bPower)
{
u32 i = 0, j = 0, WaitCount = 1;
u8 bDPTX = 0;
u8 bDPExecute = 1;
struct ast_private *ast = to_ast_private(dev);
// S3 come back, need more time to wait BMC ready.
if (bPower)
WaitCount = 300;
// Wait total count by different condition.
for (j = 0; j < WaitCount; j++) {
bDPTX = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, TX_TYPE_MASK);
if (bDPTX)
break;
msleep(100);
}
// 0xE : ASTDP with DPMCU FW handling
if (bDPTX == ASTDP_DPMCU_TX) {
// Wait one second then timeout.
i = 0;
while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, COPROCESSOR_LAUNCH) !=
COPROCESSOR_LAUNCH) {
i++;
// wait 100 ms
msleep(100);
if (i >= 10) {
// DP would not be ready.
bDPExecute = 0;
break;
}
}
if (bDPExecute)
ast->tx_chip_types |= BIT(AST_TX_ASTDP);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5,
(u8) ~ASTDP_HOST_EDID_READ_DONE_MASK,
ASTDP_HOST_EDID_READ_DONE);
}
}
void ast_dp_power_on_off(struct drm_device *dev, bool on)
{
struct ast_private *ast = to_ast_private(dev);
// Read and Turn off DP PHY sleep
u8 bE3 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, AST_DP_VIDEO_ENABLE);
// Turn on DP PHY sleep
if (!on)
bE3 |= AST_DP_PHY_SLEEP;
// DP Power on/off
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, (u8) ~AST_DP_PHY_SLEEP, bE3);
}
void ast_dp_set_on_off(struct drm_device *dev, bool on)
{
struct ast_private *ast = to_ast_private(dev);
u8 video_on_off = on;
// Video On/Off
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, (u8) ~AST_DP_VIDEO_ENABLE, on);
// If DP plug in and link successful then check video on / off status
if (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, ASTDP_LINK_SUCCESS) &&
ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD)) {
video_on_off <<= 4;
while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF,
ASTDP_MIRROR_VIDEO_ENABLE) != video_on_off) {
// wait 1 ms
mdelay(1);
}
}
}
void ast_dp_set_mode(struct drm_crtc *crtc, struct ast_vbios_mode_info *vbios_mode)
{
struct ast_private *ast = to_ast_private(crtc->dev);
u32 ulRefreshRateIndex;
u8 ModeIdx;
ulRefreshRateIndex = vbios_mode->enh_table->refresh_rate_index - 1;
switch (crtc->mode.crtc_hdisplay) {
case 320:
ModeIdx = ASTDP_320x240_60;
break;
case 400:
ModeIdx = ASTDP_400x300_60;
break;
case 512:
ModeIdx = ASTDP_512x384_60;
break;
case 640:
ModeIdx = (ASTDP_640x480_60 + (u8) ulRefreshRateIndex);
break;
case 800:
ModeIdx = (ASTDP_800x600_56 + (u8) ulRefreshRateIndex);
break;
case 1024:
ModeIdx = (ASTDP_1024x768_60 + (u8) ulRefreshRateIndex);
break;
case 1152:
ModeIdx = ASTDP_1152x864_75;
break;
case 1280:
if (crtc->mode.crtc_vdisplay == 800)
ModeIdx = (ASTDP_1280x800_60_RB - (u8) ulRefreshRateIndex);
else // 1024
ModeIdx = (ASTDP_1280x1024_60 + (u8) ulRefreshRateIndex);
break;
case 1360:
case 1366:
ModeIdx = ASTDP_1366x768_60;
break;
case 1440:
ModeIdx = (ASTDP_1440x900_60_RB - (u8) ulRefreshRateIndex);
break;
case 1600:
if (crtc->mode.crtc_vdisplay == 900)
ModeIdx = (ASTDP_1600x900_60_RB - (u8) ulRefreshRateIndex);
else //1200
ModeIdx = ASTDP_1600x1200_60;
break;
case 1680:
ModeIdx = (ASTDP_1680x1050_60_RB - (u8) ulRefreshRateIndex);
break;
case 1920:
if (crtc->mode.crtc_vdisplay == 1080)
ModeIdx = ASTDP_1920x1080_60;
else //1200
ModeIdx = ASTDP_1920x1200_60;
break;
default:
return;
}
/*
* CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp)
* CRE1[7:0]: MISC1 (default: 0x00)
* CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50)
*/
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE0, ASTDP_AND_CLEAR_MASK,
ASTDP_MISC0_24bpp);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE1, ASTDP_AND_CLEAR_MASK, ASTDP_MISC1);
ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE2, ASTDP_AND_CLEAR_MASK, ModeIdx);
}