| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| #ifndef __USBAUDIO_H |
| #define __USBAUDIO_H |
| /* |
| * (Tentative) USB Audio Driver for ALSA |
| * |
| * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de> |
| */ |
| |
| /* handling of USB vendor/product ID pairs as 32-bit numbers */ |
| #define USB_ID(vendor, product) (((unsigned int)(vendor) << 16) | (product)) |
| #define USB_ID_VENDOR(id) ((id) >> 16) |
| #define USB_ID_PRODUCT(id) ((u16)(id)) |
| |
| /* |
| * |
| */ |
| |
| struct media_device; |
| struct media_intf_devnode; |
| |
| #define MAX_CARD_INTERFACES 16 |
| |
| struct snd_usb_audio { |
| int index; |
| struct usb_device *dev; |
| struct snd_card *card; |
| struct usb_interface *intf[MAX_CARD_INTERFACES]; |
| u32 usb_id; |
| uint16_t quirk_type; |
| struct mutex mutex; |
| unsigned int system_suspend; |
| atomic_t active; |
| atomic_t shutdown; |
| atomic_t usage_count; |
| wait_queue_head_t shutdown_wait; |
| unsigned int quirk_flags; |
| unsigned int need_delayed_register:1; /* warn for delayed registration */ |
| int num_interfaces; |
| int num_suspended_intf; |
| int sample_rate_read_error; |
| |
| int badd_profile; /* UAC3 BADD profile */ |
| |
| struct list_head pcm_list; /* list of pcm streams */ |
| struct list_head ep_list; /* list of audio-related endpoints */ |
| struct list_head iface_ref_list; /* list of interface refcounts */ |
| struct list_head clock_ref_list; /* list of clock refcounts */ |
| int pcm_devs; |
| |
| struct list_head midi_list; /* list of midi interfaces */ |
| |
| struct list_head mixer_list; /* list of mixer interfaces */ |
| |
| int setup; /* from the 'device_setup' module param */ |
| bool generic_implicit_fb; /* from the 'implicit_fb' module param */ |
| bool autoclock; /* from the 'autoclock' module param */ |
| |
| bool lowlatency; /* from the 'lowlatency' module param */ |
| struct usb_host_interface *ctrl_intf; /* the audio control interface */ |
| struct media_device *media_dev; |
| struct media_intf_devnode *ctl_intf_media_devnode; |
| }; |
| |
| #define USB_AUDIO_IFACE_UNUSED ((void *)-1L) |
| |
| #define usb_audio_err(chip, fmt, args...) \ |
| dev_err(&(chip)->dev->dev, fmt, ##args) |
| #define usb_audio_warn(chip, fmt, args...) \ |
| dev_warn(&(chip)->dev->dev, fmt, ##args) |
| #define usb_audio_info(chip, fmt, args...) \ |
| dev_info(&(chip)->dev->dev, fmt, ##args) |
| #define usb_audio_dbg(chip, fmt, args...) \ |
| dev_dbg(&(chip)->dev->dev, fmt, ##args) |
| |
| /* |
| * Information about devices with broken descriptors |
| */ |
| |
| /* special values for .ifnum */ |
| #define QUIRK_NODEV_INTERFACE -3 /* return -ENODEV */ |
| #define QUIRK_NO_INTERFACE -2 |
| #define QUIRK_ANY_INTERFACE -1 |
| |
| enum quirk_type { |
| QUIRK_IGNORE_INTERFACE, |
| QUIRK_COMPOSITE, |
| QUIRK_AUTODETECT, |
| QUIRK_MIDI_STANDARD_INTERFACE, |
| QUIRK_MIDI_FIXED_ENDPOINT, |
| QUIRK_MIDI_YAMAHA, |
| QUIRK_MIDI_ROLAND, |
| QUIRK_MIDI_MIDIMAN, |
| QUIRK_MIDI_NOVATION, |
| QUIRK_MIDI_RAW_BYTES, |
| QUIRK_MIDI_EMAGIC, |
| QUIRK_MIDI_CME, |
| QUIRK_MIDI_AKAI, |
| QUIRK_MIDI_US122L, |
| QUIRK_MIDI_FTDI, |
| QUIRK_MIDI_CH345, |
| QUIRK_AUDIO_STANDARD_INTERFACE, |
| QUIRK_AUDIO_FIXED_ENDPOINT, |
| QUIRK_AUDIO_EDIROL_UAXX, |
| QUIRK_AUDIO_STANDARD_MIXER, |
| |
| QUIRK_TYPE_COUNT |
| }; |
| |
| struct snd_usb_audio_quirk { |
| const char *vendor_name; |
| const char *product_name; |
| int16_t ifnum; |
| uint16_t type; |
| const void *data; |
| }; |
| |
| #define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8)) |
| #define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16)) |
| #define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24)) |
| |
| int snd_usb_lock_shutdown(struct snd_usb_audio *chip); |
| void snd_usb_unlock_shutdown(struct snd_usb_audio *chip); |
| |
| extern bool snd_usb_use_vmalloc; |
| extern bool snd_usb_skip_validation; |
| |
| /* |
| * Driver behavior quirk flags, stored in chip->quirk_flags |
| * |
| * QUIRK_FLAG_GET_SAMPLE_RATE: |
| * Skip reading sample rate for devices, as some devices behave inconsistently |
| * or return error |
| * QUIRK_FLAG_SHARE_MEDIA_DEVICE: |
| * Create Media Controller API entries |
| * QUIRK_FLAG_ALIGN_TRANSFER: |
| * Allow alignment on audio sub-slot (channel samples) rather than on audio |
| * slots (audio frames) |
| * QUIRK_TX_LENGTH: |
| * Add length specifier to transfers |
| * QUIRK_FLAG_PLAYBACK_FIRST: |
| * Start playback stream at first even in implement feedback mode |
| * QUIRK_FLAG_SKIP_CLOCK_SELECTOR: |
| * Skip clock selector setup; the device may reset to invalid state |
| * QUIRK_FLAG_IGNORE_CLOCK_SOURCE: |
| * Ignore errors from clock source search; i.e. hardcoded clock |
| * QUIRK_FLAG_ITF_USB_DSD_DAC: |
| * Indicates the device is for ITF-USB DSD based DACs that need a vendor cmd |
| * to switch between PCM and native DSD mode |
| * QUIRK_FLAG_CTL_MSG_DELAY: |
| * Add a delay of 20ms at each control message handling |
| * QUIRK_FLAG_CTL_MSG_DELAY_1M: |
| * Add a delay of 1-2ms at each control message handling |
| * QUIRK_FLAG_CTL_MSG_DELAY_5M: |
| * Add a delay of 5-6ms at each control message handling |
| * QUIRK_FLAG_IFACE_DELAY: |
| * Add a delay of 50ms at each interface setup |
| * QUIRK_FLAG_VALIDATE_RATES: |
| * Perform sample rate validations at probe |
| * QUIRK_FLAG_DISABLE_AUTOSUSPEND: |
| * Disable runtime PM autosuspend |
| * QUIRK_FLAG_IGNORE_CTL_ERROR: |
| * Ignore errors for mixer access |
| * QUIRK_FLAG_DSD_RAW: |
| * Support generic DSD raw U32_BE format |
| * QUIRK_FLAG_SET_IFACE_FIRST: |
| * Set up the interface at first like UAC1 |
| * QUIRK_FLAG_GENERIC_IMPLICIT_FB |
| * Apply the generic implicit feedback sync mode (same as implicit_fb=1 option) |
| * QUIRK_FLAG_SKIP_IMPLICIT_FB |
| * Don't apply implicit feedback sync mode |
| */ |
| |
| #define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0) |
| #define QUIRK_FLAG_SHARE_MEDIA_DEVICE (1U << 1) |
| #define QUIRK_FLAG_ALIGN_TRANSFER (1U << 2) |
| #define QUIRK_FLAG_TX_LENGTH (1U << 3) |
| #define QUIRK_FLAG_PLAYBACK_FIRST (1U << 4) |
| #define QUIRK_FLAG_SKIP_CLOCK_SELECTOR (1U << 5) |
| #define QUIRK_FLAG_IGNORE_CLOCK_SOURCE (1U << 6) |
| #define QUIRK_FLAG_ITF_USB_DSD_DAC (1U << 7) |
| #define QUIRK_FLAG_CTL_MSG_DELAY (1U << 8) |
| #define QUIRK_FLAG_CTL_MSG_DELAY_1M (1U << 9) |
| #define QUIRK_FLAG_CTL_MSG_DELAY_5M (1U << 10) |
| #define QUIRK_FLAG_IFACE_DELAY (1U << 11) |
| #define QUIRK_FLAG_VALIDATE_RATES (1U << 12) |
| #define QUIRK_FLAG_DISABLE_AUTOSUSPEND (1U << 13) |
| #define QUIRK_FLAG_IGNORE_CTL_ERROR (1U << 14) |
| #define QUIRK_FLAG_DSD_RAW (1U << 15) |
| #define QUIRK_FLAG_SET_IFACE_FIRST (1U << 16) |
| #define QUIRK_FLAG_GENERIC_IMPLICIT_FB (1U << 17) |
| #define QUIRK_FLAG_SKIP_IMPLICIT_FB (1U << 18) |
| |
| #endif /* __USBAUDIO_H */ |