| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2018 Google LLC. |
| * |
| * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution. |
| * Based on SX9500 driver and Semtech driver using the input framework |
| * <https://my.syncplicity.com/share/teouwsim8niiaud/ |
| * linux-driver-SX9310_NoSmartHSensing>. |
| * Reworked in April 2019 by Evan Green <evgreen@chromium.org> |
| * and in January 2020 by Daniel Campello <campello@chromium.org>. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| /* Register definitions. */ |
| #define SX9310_REG_IRQ_SRC 0x00 |
| #define SX9310_REG_STAT0 0x01 |
| #define SX9310_REG_STAT1 0x02 |
| #define SX9310_REG_STAT1_COMPSTAT_MASK GENMASK(3, 0) |
| #define SX9310_REG_IRQ_MSK 0x03 |
| #define SX9310_CONVDONE_IRQ BIT(3) |
| #define SX9310_FAR_IRQ BIT(5) |
| #define SX9310_CLOSE_IRQ BIT(6) |
| #define SX9310_REG_IRQ_FUNC 0x04 |
| |
| #define SX9310_REG_PROX_CTRL0 0x10 |
| #define SX9310_REG_PROX_CTRL0_SENSOREN_MASK GENMASK(3, 0) |
| #define SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK GENMASK(7, 4) |
| #define SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS 0x01 |
| #define SX9310_REG_PROX_CTRL1 0x11 |
| #define SX9310_REG_PROX_CTRL2 0x12 |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_MASK GENMASK(7, 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3 (0x03 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 (0x02 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1 (0x01 << 6) |
| #define SX9310_REG_PROX_CTRL2_COMBMODE_CS3 (0x00 << 6) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC (0x01 << 2) |
| #define SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND (0x02 << 2) |
| #define SX9310_REG_PROX_CTRL3 0x13 |
| #define SX9310_REG_PROX_CTRL3_GAIN0_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL3_GAIN0_X8 (0x03 << 2) |
| #define SX9310_REG_PROX_CTRL3_GAIN12_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL3_GAIN12_X4 0x02 |
| #define SX9310_REG_PROX_CTRL4 0x14 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MASK GENMASK(2, 0) |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST 0x07 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE 0x06 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_FINE 0x05 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM 0x04 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE 0x03 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE 0x02 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE 0x01 |
| #define SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST 0x00 |
| #define SX9310_REG_PROX_CTRL5 0x15 |
| #define SX9310_REG_PROX_CTRL5_RANGE_SMALL (0x03 << 6) |
| #define SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 (0x01 << 2) |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_SHIFT 0 |
| #define SX9310_REG_PROX_CTRL5_RAWFILT_1P25 0x02 |
| #define SX9310_REG_PROX_CTRL6 0x16 |
| #define SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT 0x20 |
| #define SX9310_REG_PROX_CTRL7 0x17 |
| #define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 (0x01 << 3) |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK GENMASK(2, 0) |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_SHIFT 0 |
| #define SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 0x05 |
| #define SX9310_REG_PROX_CTRL8 0x18 |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK GENMASK(7, 3) |
| #define SX9310_REG_PROX_CTRL9 0x19 |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_28 (0x08 << 3) |
| #define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 (0x11 << 3) |
| #define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 0x03 |
| #define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 0x05 |
| #define SX9310_REG_PROX_CTRL10 0x1a |
| #define SX9310_REG_PROX_CTRL10_HYST_MASK GENMASK(5, 4) |
| #define SX9310_REG_PROX_CTRL10_HYST_6PCT (0x01 << 4) |
| #define SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK GENMASK(3, 2) |
| #define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK GENMASK(1, 0) |
| #define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 0x01 |
| #define SX9310_REG_PROX_CTRL11 0x1b |
| #define SX9310_REG_PROX_CTRL12 0x1c |
| #define SX9310_REG_PROX_CTRL13 0x1d |
| #define SX9310_REG_PROX_CTRL14 0x1e |
| #define SX9310_REG_PROX_CTRL15 0x1f |
| #define SX9310_REG_PROX_CTRL16 0x20 |
| #define SX9310_REG_PROX_CTRL17 0x21 |
| #define SX9310_REG_PROX_CTRL18 0x22 |
| #define SX9310_REG_PROX_CTRL19 0x23 |
| #define SX9310_REG_SAR_CTRL0 0x2a |
| #define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES (0x02 << 5) |
| #define SX9310_REG_SAR_CTRL0_SARHYST_8 (0x02 << 3) |
| #define SX9310_REG_SAR_CTRL1 0x2b |
| /* Each increment of the slope register is 0.0078125. */ |
| #define SX9310_REG_SAR_CTRL1_SLOPE(_hnslope) (_hnslope / 78125) |
| #define SX9310_REG_SAR_CTRL2 0x2c |
| #define SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT 0x3c |
| |
| #define SX9310_REG_SENSOR_SEL 0x30 |
| #define SX9310_REG_USE_MSB 0x31 |
| #define SX9310_REG_USE_LSB 0x32 |
| #define SX9310_REG_AVG_MSB 0x33 |
| #define SX9310_REG_AVG_LSB 0x34 |
| #define SX9310_REG_DIFF_MSB 0x35 |
| #define SX9310_REG_DIFF_LSB 0x36 |
| #define SX9310_REG_OFFSET_MSB 0x37 |
| #define SX9310_REG_OFFSET_LSB 0x38 |
| #define SX9310_REG_SAR_MSB 0x39 |
| #define SX9310_REG_SAR_LSB 0x3a |
| #define SX9310_REG_I2C_ADDR 0x40 |
| #define SX9310_REG_PAUSE 0x41 |
| #define SX9310_REG_WHOAMI 0x42 |
| #define SX9310_WHOAMI_VALUE 0x01 |
| #define SX9311_WHOAMI_VALUE 0x02 |
| #define SX9310_REG_RESET 0x7f |
| #define SX9310_SOFT_RESET 0xde |
| |
| |
| /* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */ |
| #define SX9310_NUM_CHANNELS 4 |
| static_assert(SX9310_NUM_CHANNELS < BITS_PER_LONG); |
| |
| struct sx9310_data { |
| /* Serialize access to registers and channel configuration */ |
| struct mutex mutex; |
| struct i2c_client *client; |
| struct iio_trigger *trig; |
| struct regmap *regmap; |
| struct regulator_bulk_data supplies[2]; |
| /* |
| * Last reading of the proximity status for each channel. |
| * We only send an event to user space when this changes. |
| */ |
| unsigned long chan_prox_stat; |
| bool trigger_enabled; |
| /* Ensure correct alignment of timestamp when present. */ |
| struct { |
| __be16 channels[SX9310_NUM_CHANNELS]; |
| s64 ts __aligned(8); |
| } buffer; |
| /* Remember enabled channels and sample rate during suspend. */ |
| unsigned int suspend_ctrl0; |
| struct completion completion; |
| unsigned long chan_read; |
| unsigned long chan_event; |
| unsigned int whoami; |
| }; |
| |
| static const struct iio_event_spec sx9310_events[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD), |
| }, |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD), |
| }, |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE) | |
| BIT(IIO_EV_INFO_HYSTERESIS) | |
| BIT(IIO_EV_INFO_VALUE), |
| }, |
| }; |
| |
| #define SX9310_NAMED_CHANNEL(idx, name) \ |
| { \ |
| .type = IIO_PROXIMITY, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .info_mask_separate_available = \ |
| BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| .indexed = 1, \ |
| .channel = idx, \ |
| .extend_name = name, \ |
| .address = SX9310_REG_DIFF_MSB, \ |
| .event_spec = sx9310_events, \ |
| .num_event_specs = ARRAY_SIZE(sx9310_events), \ |
| .scan_index = idx, \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| #define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL) |
| |
| static const struct iio_chan_spec sx9310_channels[] = { |
| SX9310_CHANNEL(0), /* CS0 */ |
| SX9310_CHANNEL(1), /* CS1 */ |
| SX9310_CHANNEL(2), /* CS2 */ |
| SX9310_NAMED_CHANNEL(3, "comb"), /* COMB */ |
| |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| /* |
| * Each entry contains the integer part (val) and the fractional part, in micro |
| * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO. |
| */ |
| static const struct { |
| int val; |
| int val2; |
| } sx9310_samp_freq_table[] = { |
| { 500, 0 }, /* 0000: Min (no idle time) */ |
| { 66, 666666 }, /* 0001: 15 ms */ |
| { 33, 333333 }, /* 0010: 30 ms (Typ.) */ |
| { 22, 222222 }, /* 0011: 45 ms */ |
| { 16, 666666 }, /* 0100: 60 ms */ |
| { 11, 111111 }, /* 0101: 90 ms */ |
| { 8, 333333 }, /* 0110: 120 ms */ |
| { 5, 0 }, /* 0111: 200 ms */ |
| { 2, 500000 }, /* 1000: 400 ms */ |
| { 1, 666666 }, /* 1001: 600 ms */ |
| { 1, 250000 }, /* 1010: 800 ms */ |
| { 1, 0 }, /* 1011: 1 s */ |
| { 0, 500000 }, /* 1100: 2 s */ |
| { 0, 333333 }, /* 1101: 3 s */ |
| { 0, 250000 }, /* 1110: 4 s */ |
| { 0, 200000 }, /* 1111: 5 s */ |
| }; |
| static const unsigned int sx9310_scan_period_table[] = { |
| 2, 15, 30, 45, 60, 90, 120, 200, |
| 400, 600, 800, 1000, 2000, 3000, 4000, 5000, |
| }; |
| |
| static ssize_t sx9310_show_samp_freq_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| size_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ", |
| sx9310_samp_freq_table[i].val, |
| sx9310_samp_freq_table[i].val2); |
| buf[len - 1] = '\n'; |
| return len; |
| } |
| static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail); |
| |
| static const struct regmap_range sx9310_writable_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC), |
| regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19), |
| regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2), |
| regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL), |
| regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB), |
| regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_writeable_regs = { |
| .yes_ranges = sx9310_writable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9310_readable_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC), |
| regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19), |
| regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2), |
| regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB), |
| regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_readable_regs = { |
| .yes_ranges = sx9310_readable_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges), |
| }; |
| |
| static const struct regmap_range sx9310_volatile_reg_ranges[] = { |
| regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1), |
| regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB), |
| regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB), |
| regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET), |
| }; |
| |
| static const struct regmap_access_table sx9310_volatile_regs = { |
| .yes_ranges = sx9310_volatile_reg_ranges, |
| .n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges), |
| }; |
| |
| static const struct regmap_config sx9310_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = SX9310_REG_RESET, |
| .cache_type = REGCACHE_RBTREE, |
| |
| .wr_table = &sx9310_writeable_regs, |
| .rd_table = &sx9310_readable_regs, |
| .volatile_table = &sx9310_volatile_regs, |
| }; |
| |
| static int sx9310_update_chan_en(struct sx9310_data *data, |
| unsigned long chan_read, |
| unsigned long chan_event) |
| { |
| int ret; |
| unsigned long channels = chan_read | chan_event; |
| |
| if ((data->chan_read | data->chan_event) != channels) { |
| ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0, |
| SX9310_REG_PROX_CTRL0_SENSOREN_MASK, |
| channels); |
| if (ret) |
| return ret; |
| } |
| data->chan_read = chan_read; |
| data->chan_event = chan_event; |
| return 0; |
| } |
| |
| static int sx9310_get_read_channel(struct sx9310_data *data, int channel) |
| { |
| return sx9310_update_chan_en(data, data->chan_read | BIT(channel), |
| data->chan_event); |
| } |
| |
| static int sx9310_put_read_channel(struct sx9310_data *data, int channel) |
| { |
| return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel), |
| data->chan_event); |
| } |
| |
| static int sx9310_get_event_channel(struct sx9310_data *data, int channel) |
| { |
| return sx9310_update_chan_en(data, data->chan_read, |
| data->chan_event | BIT(channel)); |
| } |
| |
| static int sx9310_put_event_channel(struct sx9310_data *data, int channel) |
| { |
| return sx9310_update_chan_en(data, data->chan_read, |
| data->chan_event & ~BIT(channel)); |
| } |
| |
| static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq) |
| { |
| if (!data->client->irq) |
| return 0; |
| return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq); |
| } |
| |
| static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq) |
| { |
| if (!data->client->irq) |
| return 0; |
| return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0); |
| } |
| |
| static int sx9310_read_prox_data(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, __be16 *val) |
| { |
| int ret; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel); |
| if (ret) |
| return ret; |
| |
| return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val)); |
| } |
| |
| /* |
| * If we have no interrupt support, we have to wait for a scan period |
| * after enabling a channel to get a result. |
| */ |
| static int sx9310_wait_for_sample(struct sx9310_data *data) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val); |
| if (ret) |
| return ret; |
| |
| val = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, val); |
| |
| msleep(sx9310_scan_period_table[val]); |
| |
| return 0; |
| } |
| |
| static int sx9310_read_proximity(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| int ret; |
| __be16 rawval; |
| |
| mutex_lock(&data->mutex); |
| |
| ret = sx9310_get_read_channel(data, chan->channel); |
| if (ret) |
| goto out; |
| |
| ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ); |
| if (ret) |
| goto out_put_channel; |
| |
| mutex_unlock(&data->mutex); |
| |
| if (data->client->irq) { |
| ret = wait_for_completion_interruptible(&data->completion); |
| reinit_completion(&data->completion); |
| } else { |
| ret = sx9310_wait_for_sample(data); |
| } |
| |
| mutex_lock(&data->mutex); |
| |
| if (ret) |
| goto out_disable_irq; |
| |
| ret = sx9310_read_prox_data(data, chan, &rawval); |
| if (ret) |
| goto out_disable_irq; |
| |
| *val = sign_extend32(be16_to_cpu(rawval), |
| chan->address == SX9310_REG_DIFF_MSB ? 11 : 15); |
| |
| ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ); |
| if (ret) |
| goto out_put_channel; |
| |
| ret = sx9310_put_read_channel(data, chan->channel); |
| if (ret) |
| goto out; |
| |
| mutex_unlock(&data->mutex); |
| |
| return IIO_VAL_INT; |
| |
| out_disable_irq: |
| sx9310_disable_irq(data, SX9310_CONVDONE_IRQ); |
| out_put_channel: |
| sx9310_put_read_channel(data, chan->channel); |
| out: |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_read_gain(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval, gain; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL3, ®val); |
| if (ret) |
| return ret; |
| |
| switch (chan->channel) { |
| case 0: |
| case 3: |
| gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN0_MASK, regval); |
| break; |
| case 1: |
| case 2: |
| gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN12_MASK, regval); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val = 1 << gain; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, regval); |
| *val = sx9310_samp_freq_table[regval].val; |
| *val2 = sx9310_samp_freq_table[regval].val2; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int sx9310_read_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int *val, |
| int *val2, long mask) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = sx9310_read_proximity(data, chan, val); |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = sx9310_read_gain(data, chan, val); |
| iio_device_release_direct_mode(indio_dev); |
| return ret; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9310_read_samp_freq(data, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const int sx9310_gain_vals[] = { 1, 2, 4, 8 }; |
| |
| static int sx9310_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| *type = IIO_VAL_INT; |
| *length = ARRAY_SIZE(sx9310_gain_vals); |
| *vals = sx9310_gain_vals; |
| return IIO_AVAIL_LIST; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const unsigned int sx9310_pthresh_codes[] = { |
| 2, 4, 6, 8, 12, 16, 20, 24, 28, 32, 40, 48, 56, 64, 72, 80, 88, 96, 112, |
| 128, 144, 160, 192, 224, 256, 320, 384, 512, 640, 768, 1024, 1536 |
| }; |
| |
| static int sx9310_get_thresh_reg(unsigned int channel) |
| { |
| switch (channel) { |
| case 0: |
| case 3: |
| return SX9310_REG_PROX_CTRL8; |
| case 1: |
| case 2: |
| return SX9310_REG_PROX_CTRL9; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int sx9310_read_thresh(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int reg; |
| unsigned int regval; |
| int ret; |
| |
| reg = ret = sx9310_get_thresh_reg(chan->channel); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, reg, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| if (regval >= ARRAY_SIZE(sx9310_pthresh_codes)) |
| return -EINVAL; |
| |
| *val = sx9310_pthresh_codes[regval]; |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_hysteresis(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int *val) |
| { |
| unsigned int regval, pthresh; |
| int ret; |
| |
| ret = sx9310_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_HYST_MASK, regval); |
| if (!regval) |
| regval = 5; |
| |
| /* regval is at most 5 */ |
| *val = pthresh >> (5 - regval); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_far_debounce(struct sx9310_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_close_debounce(struct sx9310_data *data, int *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, ®val); |
| if (ret) |
| return ret; |
| |
| regval = FIELD_GET(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, regval); |
| if (regval) |
| *val = 1 << regval; |
| else |
| *val = 0; |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int sx9310_read_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int *val, int *val2) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9310_read_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9310_read_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9310_read_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9310_read_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9310_write_thresh(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int reg; |
| unsigned int regval; |
| int ret, i; |
| |
| reg = ret = sx9310_get_thresh_reg(chan->channel); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9310_pthresh_codes); i++) { |
| if (sx9310_pthresh_codes[i] == val) { |
| regval = i; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(sx9310_pthresh_codes)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, reg, |
| SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_hysteresis(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int _val) |
| { |
| unsigned int hyst, val = _val; |
| int ret, pthresh; |
| |
| ret = sx9310_read_thresh(data, chan, &pthresh); |
| if (ret < 0) |
| return ret; |
| |
| if (val == 0) |
| hyst = 0; |
| else if (val == pthresh >> 2) |
| hyst = 3; |
| else if (val == pthresh >> 3) |
| hyst = 2; |
| else if (val == pthresh >> 4) |
| hyst = 1; |
| else |
| return -EINVAL; |
| |
| hyst = FIELD_PREP(SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_far_debounce(struct sx9310_data *data, int val) |
| { |
| int ret; |
| unsigned int regval; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, |
| regval); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_close_debounce(struct sx9310_data *data, int val) |
| { |
| int ret; |
| unsigned int regval; |
| |
| if (val > 0) |
| val = ilog2(val); |
| if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val)) |
| return -EINVAL; |
| |
| regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, |
| SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, |
| regval); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, int val, int val2) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return sx9310_write_thresh(data, chan, val); |
| case IIO_EV_INFO_PERIOD: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return sx9310_write_far_debounce(data, val); |
| case IIO_EV_DIR_FALLING: |
| return sx9310_write_close_debounce(data, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_HYSTERESIS: |
| return sx9310_write_hysteresis(data, chan, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2) |
| { |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++) |
| if (val == sx9310_samp_freq_table[i].val && |
| val2 == sx9310_samp_freq_table[i].val2) |
| break; |
| |
| if (i == ARRAY_SIZE(sx9310_samp_freq_table)) |
| return -EINVAL; |
| |
| mutex_lock(&data->mutex); |
| |
| ret = regmap_update_bits( |
| data->regmap, SX9310_REG_PROX_CTRL0, |
| SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, |
| FIELD_PREP(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, i)); |
| |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_gain(struct sx9310_data *data, |
| const struct iio_chan_spec *chan, int val) |
| { |
| unsigned int gain, mask; |
| int ret; |
| |
| gain = ilog2(val); |
| |
| switch (chan->channel) { |
| case 0: |
| case 3: |
| mask = SX9310_REG_PROX_CTRL3_GAIN0_MASK; |
| gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN0_MASK, gain); |
| break; |
| case 1: |
| case 2: |
| mask = SX9310_REG_PROX_CTRL3_GAIN12_MASK; |
| gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN12_MASK, gain); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask, |
| gain); |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static int sx9310_write_raw(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, int val, int val2, |
| long mask) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| |
| if (chan->type != IIO_PROXIMITY) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return sx9310_set_samp_freq(data, val, val2); |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return sx9310_write_gain(data, chan, val); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static irqreturn_t sx9310_irq_handler(int irq, void *private) |
| { |
| struct iio_dev *indio_dev = private; |
| struct sx9310_data *data = iio_priv(indio_dev); |
| |
| if (data->trigger_enabled) |
| iio_trigger_poll(data->trig); |
| |
| /* |
| * Even if no event is enabled, we need to wake the thread to clear the |
| * interrupt state by reading SX9310_REG_IRQ_SRC. |
| * It is not possible to do that here because regmap_read takes a mutex. |
| */ |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static void sx9310_push_events(struct iio_dev *indio_dev) |
| { |
| int ret; |
| unsigned int val, chan; |
| struct sx9310_data *data = iio_priv(indio_dev); |
| s64 timestamp = iio_get_time_ns(indio_dev); |
| unsigned long prox_changed; |
| |
| /* Read proximity state on all channels */ |
| ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val); |
| if (ret) { |
| dev_err(&data->client->dev, "i2c transfer error in irq\n"); |
| return; |
| } |
| |
| /* |
| * Only iterate over channels with changes on proximity status that have |
| * events enabled. |
| */ |
| prox_changed = (data->chan_prox_stat ^ val) & data->chan_event; |
| |
| for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) { |
| int dir; |
| u64 ev; |
| |
| dir = (val & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING; |
| ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan, |
| IIO_EV_TYPE_THRESH, dir); |
| |
| iio_push_event(indio_dev, ev, timestamp); |
| } |
| data->chan_prox_stat = val; |
| } |
| |
| static irqreturn_t sx9310_irq_thread_handler(int irq, void *private) |
| { |
| struct iio_dev *indio_dev = private; |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret; |
| unsigned int val; |
| |
| mutex_lock(&data->mutex); |
| |
| ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val); |
| if (ret) { |
| dev_err(&data->client->dev, "i2c transfer error in irq\n"); |
| goto out; |
| } |
| |
| if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ)) |
| sx9310_push_events(indio_dev); |
| |
| if (val & SX9310_CONVDONE_IRQ) |
| complete(&data->completion); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sx9310_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| |
| return !!(data->chan_event & BIT(chan->channel)); |
| } |
| |
| static int sx9310_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ; |
| int ret; |
| |
| /* If the state hasn't changed, there's nothing to do. */ |
| if (!!(data->chan_event & BIT(chan->channel)) == state) |
| return 0; |
| |
| mutex_lock(&data->mutex); |
| if (state) { |
| ret = sx9310_get_event_channel(data, chan->channel); |
| if (ret) |
| goto out_unlock; |
| if (!(data->chan_event & ~BIT(chan->channel))) { |
| ret = sx9310_enable_irq(data, eventirq); |
| if (ret) |
| sx9310_put_event_channel(data, chan->channel); |
| } |
| } else { |
| ret = sx9310_put_event_channel(data, chan->channel); |
| if (ret) |
| goto out_unlock; |
| if (!data->chan_event) { |
| ret = sx9310_disable_irq(data, eventirq); |
| if (ret) |
| sx9310_get_event_channel(data, chan->channel); |
| } |
| } |
| |
| out_unlock: |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static struct attribute *sx9310_attributes[] = { |
| &iio_dev_attr_sampling_frequency_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group sx9310_attribute_group = { |
| .attrs = sx9310_attributes, |
| }; |
| |
| static const struct iio_info sx9310_info = { |
| .attrs = &sx9310_attribute_group, |
| .read_raw = sx9310_read_raw, |
| .read_avail = sx9310_read_avail, |
| .read_event_value = sx9310_read_event_val, |
| .write_event_value = sx9310_write_event_val, |
| .write_raw = sx9310_write_raw, |
| .read_event_config = sx9310_read_event_config, |
| .write_event_config = sx9310_write_event_config, |
| }; |
| |
| static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state) |
| { |
| struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret = 0; |
| |
| mutex_lock(&data->mutex); |
| |
| if (state) |
| ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ); |
| else if (!data->chan_read) |
| ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ); |
| if (ret) |
| goto out; |
| |
| data->trigger_enabled = state; |
| |
| out: |
| mutex_unlock(&data->mutex); |
| |
| return ret; |
| } |
| |
| static const struct iio_trigger_ops sx9310_trigger_ops = { |
| .set_trigger_state = sx9310_set_trigger_state, |
| }; |
| |
| static irqreturn_t sx9310_trigger_handler(int irq, void *private) |
| { |
| struct iio_poll_func *pf = private; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct sx9310_data *data = iio_priv(indio_dev); |
| __be16 val; |
| int bit, ret, i = 0; |
| |
| mutex_lock(&data->mutex); |
| |
| for_each_set_bit(bit, indio_dev->active_scan_mask, |
| indio_dev->masklength) { |
| ret = sx9310_read_prox_data(data, &indio_dev->channels[bit], |
| &val); |
| if (ret) |
| goto out; |
| |
| data->buffer.channels[i++] = val; |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, |
| pf->timestamp); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sx9310_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| unsigned long channels = 0; |
| int bit, ret; |
| |
| mutex_lock(&data->mutex); |
| for_each_set_bit(bit, indio_dev->active_scan_mask, |
| indio_dev->masklength) |
| __set_bit(indio_dev->channels[bit].channel, &channels); |
| |
| ret = sx9310_update_chan_en(data, channels, data->chan_event); |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static int sx9310_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = sx9310_update_chan_en(data, 0, data->chan_event); |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = { |
| .preenable = sx9310_buffer_preenable, |
| .postdisable = sx9310_buffer_postdisable, |
| }; |
| |
| struct sx9310_reg_default { |
| u8 reg; |
| u8 def; |
| }; |
| |
| static const struct sx9310_reg_default sx9310_default_regs[] = { |
| { SX9310_REG_IRQ_MSK, 0x00 }, |
| { SX9310_REG_IRQ_FUNC, 0x00 }, |
| /* |
| * The lower 4 bits should not be set as it enable sensors measurements. |
| * Turning the detection on before the configuration values are set to |
| * good values can cause the device to return erroneous readings. |
| */ |
| { SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS }, |
| { SX9310_REG_PROX_CTRL1, 0x00 }, |
| { SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 | |
| SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC }, |
| { SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 | |
| SX9310_REG_PROX_CTRL3_GAIN12_X4 }, |
| { SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST }, |
| { SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL | |
| SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 | |
| SX9310_REG_PROX_CTRL5_RAWFILT_1P25 }, |
| { SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT }, |
| { SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 | |
| SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 }, |
| { SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 | |
| SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 }, |
| { SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 | |
| SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 }, |
| { SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT | |
| SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 }, |
| { SX9310_REG_PROX_CTRL11, 0x00 }, |
| { SX9310_REG_PROX_CTRL12, 0x00 }, |
| { SX9310_REG_PROX_CTRL13, 0x00 }, |
| { SX9310_REG_PROX_CTRL14, 0x00 }, |
| { SX9310_REG_PROX_CTRL15, 0x00 }, |
| { SX9310_REG_PROX_CTRL16, 0x00 }, |
| { SX9310_REG_PROX_CTRL17, 0x00 }, |
| { SX9310_REG_PROX_CTRL18, 0x00 }, |
| { SX9310_REG_PROX_CTRL19, 0x00 }, |
| { SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES | |
| SX9310_REG_SAR_CTRL0_SARHYST_8 }, |
| { SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) }, |
| { SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT }, |
| }; |
| |
| /* Activate all channels and perform an initial compensation. */ |
| static int sx9310_init_compensation(struct iio_dev *indio_dev) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret; |
| unsigned int val; |
| unsigned int ctrl0; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0); |
| if (ret) |
| return ret; |
| |
| /* run the compensation phase on all channels */ |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, |
| ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val, |
| !(val & SX9310_REG_STAT1_COMPSTAT_MASK), |
| 20000, 2000000); |
| if (ret) { |
| if (ret == -ETIMEDOUT) |
| dev_err(&data->client->dev, |
| "initial compensation timed out: 0x%02x\n", |
| val); |
| return ret; |
| } |
| |
| regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0); |
| return ret; |
| } |
| |
| static const struct sx9310_reg_default * |
| sx9310_get_default_reg(struct device *dev, int idx, |
| struct sx9310_reg_default *reg_def) |
| { |
| u32 combined[SX9310_NUM_CHANNELS]; |
| u32 start = 0, raw = 0, pos = 0; |
| unsigned long comb_mask = 0; |
| int ret, i, count; |
| const char *res; |
| |
| memcpy(reg_def, &sx9310_default_regs[idx], sizeof(*reg_def)); |
| switch (reg_def->reg) { |
| case SX9310_REG_PROX_CTRL2: |
| if (device_property_read_bool(dev, "semtech,cs0-ground")) { |
| reg_def->def &= ~SX9310_REG_PROX_CTRL2_SHIELDEN_MASK; |
| reg_def->def |= SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND; |
| } |
| |
| count = device_property_count_u32(dev, "semtech,combined-sensors"); |
| if (count < 0 || count > ARRAY_SIZE(combined)) |
| break; |
| ret = device_property_read_u32_array(dev, "semtech,combined-sensors", |
| combined, count); |
| if (ret) |
| break; |
| |
| for (i = 0; i < count; i++) |
| comb_mask |= BIT(combined[i]); |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK; |
| if (comb_mask == (BIT(3) | BIT(2) | BIT(1) | BIT(0))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3; |
| else if (comb_mask == (BIT(1) | BIT(2))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2; |
| else if (comb_mask == (BIT(0) | BIT(1))) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1; |
| else if (comb_mask == BIT(3)) |
| reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS3; |
| |
| break; |
| case SX9310_REG_PROX_CTRL4: |
| ret = device_property_read_string(dev, "semtech,resolution", &res); |
| if (ret) |
| break; |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL4_RESOLUTION_MASK; |
| if (!strcmp(res, "coarsest")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST; |
| else if (!strcmp(res, "very-coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE; |
| else if (!strcmp(res, "coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE; |
| else if (!strcmp(res, "medium-coarse")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE; |
| else if (!strcmp(res, "medium")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM; |
| else if (!strcmp(res, "fine")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINE; |
| else if (!strcmp(res, "very-fine")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE; |
| else if (!strcmp(res, "finest")) |
| reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST; |
| |
| break; |
| case SX9310_REG_PROX_CTRL5: |
| ret = device_property_read_u32(dev, "semtech,startup-sensor", &start); |
| if (ret) { |
| start = FIELD_GET(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK, |
| reg_def->def); |
| } |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK, |
| start); |
| |
| ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw); |
| if (ret) { |
| raw = FIELD_GET(SX9310_REG_PROX_CTRL5_RAWFILT_MASK, |
| reg_def->def); |
| } else { |
| raw = ilog2(raw); |
| } |
| |
| reg_def->def &= ~SX9310_REG_PROX_CTRL5_RAWFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_RAWFILT_MASK, |
| raw); |
| break; |
| case SX9310_REG_PROX_CTRL7: |
| ret = device_property_read_u32(dev, "semtech,avg-pos-strength", &pos); |
| if (ret) |
| break; |
| |
| /* Powers of 2, except for a gap between 16 and 64 */ |
| pos = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3); |
| reg_def->def &= ~SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK; |
| reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK, |
| pos); |
| break; |
| } |
| |
| return reg_def; |
| } |
| |
| static int sx9310_init_device(struct iio_dev *indio_dev) |
| { |
| struct sx9310_data *data = iio_priv(indio_dev); |
| struct sx9310_reg_default tmp; |
| const struct sx9310_reg_default *initval; |
| int ret; |
| unsigned int i, val; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET); |
| if (ret) |
| return ret; |
| |
| usleep_range(1000, 2000); /* power-up time is ~1ms. */ |
| |
| /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */ |
| ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val); |
| if (ret) |
| return ret; |
| |
| /* Program some sane defaults. */ |
| for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) { |
| initval = sx9310_get_default_reg(&indio_dev->dev, i, &tmp); |
| ret = regmap_write(data->regmap, initval->reg, initval->def); |
| if (ret) |
| return ret; |
| } |
| |
| return sx9310_init_compensation(indio_dev); |
| } |
| |
| static int sx9310_set_indio_dev_name(struct device *dev, |
| struct iio_dev *indio_dev, |
| unsigned int whoami) |
| { |
| unsigned int long ddata; |
| |
| ddata = (uintptr_t)device_get_match_data(dev); |
| if (ddata != whoami) { |
| dev_err(dev, "WHOAMI does not match device data: %u\n", whoami); |
| return -ENODEV; |
| } |
| |
| switch (whoami) { |
| case SX9310_WHOAMI_VALUE: |
| indio_dev->name = "sx9310"; |
| break; |
| case SX9311_WHOAMI_VALUE: |
| indio_dev->name = "sx9311"; |
| break; |
| default: |
| dev_err(dev, "unexpected WHOAMI response: %u\n", whoami); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static void sx9310_regulator_disable(void *_data) |
| { |
| struct sx9310_data *data = _data; |
| |
| regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies); |
| } |
| |
| static int sx9310_probe(struct i2c_client *client) |
| { |
| int ret; |
| struct device *dev = &client->dev; |
| struct iio_dev *indio_dev; |
| struct sx9310_data *data; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| data->client = client; |
| data->supplies[0].supply = "vdd"; |
| data->supplies[1].supply = "svdd"; |
| mutex_init(&data->mutex); |
| init_completion(&data->completion); |
| |
| data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config); |
| if (IS_ERR(data->regmap)) |
| return PTR_ERR(data->regmap); |
| |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies), |
| data->supplies); |
| if (ret) |
| return ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies); |
| if (ret) |
| return ret; |
| /* Must wait for Tpor time after initial power up */ |
| usleep_range(1000, 1100); |
| |
| ret = devm_add_action_or_reset(dev, sx9310_regulator_disable, data); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami); |
| if (ret) { |
| dev_err(dev, "error in reading WHOAMI register: %d", ret); |
| return ret; |
| } |
| |
| ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami); |
| if (ret) |
| return ret; |
| |
| ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev)); |
| indio_dev->channels = sx9310_channels; |
| indio_dev->num_channels = ARRAY_SIZE(sx9310_channels); |
| indio_dev->info = &sx9310_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| i2c_set_clientdata(client, indio_dev); |
| |
| ret = sx9310_init_device(indio_dev); |
| if (ret) |
| return ret; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(dev, client->irq, |
| sx9310_irq_handler, |
| sx9310_irq_thread_handler, |
| IRQF_ONESHOT, |
| "sx9310_event", indio_dev); |
| if (ret) |
| return ret; |
| |
| data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", |
| indio_dev->name, |
| iio_device_id(indio_dev)); |
| if (!data->trig) |
| return -ENOMEM; |
| |
| data->trig->ops = &sx9310_trigger_ops; |
| iio_trigger_set_drvdata(data->trig, indio_dev); |
| |
| ret = devm_iio_trigger_register(dev, data->trig); |
| if (ret) |
| return ret; |
| } |
| |
| ret = devm_iio_triggered_buffer_setup(dev, indio_dev, |
| iio_pollfunc_store_time, |
| sx9310_trigger_handler, |
| &sx9310_buffer_setup_ops); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static int __maybe_unused sx9310_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct sx9310_data *data = iio_priv(indio_dev); |
| u8 ctrl0; |
| int ret; |
| |
| disable_irq_nosync(data->client->irq); |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, |
| &data->suspend_ctrl0); |
| if (ret) |
| goto out; |
| |
| ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK; |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0); |
| if (ret) |
| goto out; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| return ret; |
| } |
| |
| static int __maybe_unused sx9310_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct sx9310_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&data->mutex); |
| ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1); |
| if (ret) |
| goto out; |
| |
| ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, |
| data->suspend_ctrl0); |
| |
| out: |
| mutex_unlock(&data->mutex); |
| if (ret) |
| return ret; |
| |
| enable_irq(data->client->irq); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops sx9310_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(sx9310_suspend, sx9310_resume) |
| }; |
| |
| static const struct acpi_device_id sx9310_acpi_match[] = { |
| { "STH9310", SX9310_WHOAMI_VALUE }, |
| { "STH9311", SX9311_WHOAMI_VALUE }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match); |
| |
| static const struct of_device_id sx9310_of_match[] = { |
| { .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE }, |
| { .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, sx9310_of_match); |
| |
| static const struct i2c_device_id sx9310_id[] = { |
| { "sx9310", SX9310_WHOAMI_VALUE }, |
| { "sx9311", SX9311_WHOAMI_VALUE }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx9310_id); |
| |
| static struct i2c_driver sx9310_driver = { |
| .driver = { |
| .name = "sx9310", |
| .acpi_match_table = sx9310_acpi_match, |
| .of_match_table = sx9310_of_match, |
| .pm = &sx9310_pm_ops, |
| |
| /* |
| * Lots of i2c transfers in probe + over 200 ms waiting in |
| * sx9310_init_compensation() mean a slow probe; prefer async |
| * so we don't delay boot if we're builtin to the kernel. |
| */ |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .probe_new = sx9310_probe, |
| .id_table = sx9310_id, |
| }; |
| module_i2c_driver(sx9310_driver); |
| |
| MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>"); |
| MODULE_AUTHOR("Daniel Campello <campello@chromium.org>"); |
| MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor"); |
| MODULE_LICENSE("GPL v2"); |