| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/delay.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <uapi/linux/serial.h> |
| |
| struct ledtrig_tty_data { |
| struct led_classdev *led_cdev; |
| struct delayed_work dwork; |
| struct mutex mutex; |
| const char *ttyname; |
| struct tty_struct *tty; |
| int rx, tx; |
| }; |
| |
| static void ledtrig_tty_restart(struct ledtrig_tty_data *trigger_data) |
| { |
| schedule_delayed_work(&trigger_data->dwork, 0); |
| } |
| |
| static ssize_t ttyname_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev); |
| ssize_t len = 0; |
| |
| mutex_lock(&trigger_data->mutex); |
| |
| if (trigger_data->ttyname) |
| len = sprintf(buf, "%s\n", trigger_data->ttyname); |
| |
| mutex_unlock(&trigger_data->mutex); |
| |
| return len; |
| } |
| |
| static ssize_t ttyname_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t size) |
| { |
| struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev); |
| char *ttyname; |
| ssize_t ret = size; |
| bool running; |
| |
| if (size > 0 && buf[size - 1] == '\n') |
| size -= 1; |
| |
| if (size) { |
| ttyname = kmemdup_nul(buf, size, GFP_KERNEL); |
| if (!ttyname) |
| return -ENOMEM; |
| } else { |
| ttyname = NULL; |
| } |
| |
| mutex_lock(&trigger_data->mutex); |
| |
| running = trigger_data->ttyname != NULL; |
| |
| kfree(trigger_data->ttyname); |
| tty_kref_put(trigger_data->tty); |
| trigger_data->tty = NULL; |
| |
| trigger_data->ttyname = ttyname; |
| |
| mutex_unlock(&trigger_data->mutex); |
| |
| if (ttyname && !running) |
| ledtrig_tty_restart(trigger_data); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RW(ttyname); |
| |
| static void ledtrig_tty_work(struct work_struct *work) |
| { |
| struct ledtrig_tty_data *trigger_data = |
| container_of(work, struct ledtrig_tty_data, dwork.work); |
| struct serial_icounter_struct icount; |
| int ret; |
| |
| mutex_lock(&trigger_data->mutex); |
| |
| if (!trigger_data->ttyname) { |
| /* exit without rescheduling */ |
| mutex_unlock(&trigger_data->mutex); |
| return; |
| } |
| |
| /* try to get the tty corresponding to $ttyname */ |
| if (!trigger_data->tty) { |
| dev_t devno; |
| struct tty_struct *tty; |
| int ret; |
| |
| ret = tty_dev_name_to_number(trigger_data->ttyname, &devno); |
| if (ret < 0) |
| /* |
| * A device with this name might appear later, so keep |
| * retrying. |
| */ |
| goto out; |
| |
| tty = tty_kopen_shared(devno); |
| if (IS_ERR(tty) || !tty) |
| /* What to do? retry or abort */ |
| goto out; |
| |
| trigger_data->tty = tty; |
| } |
| |
| ret = tty_get_icount(trigger_data->tty, &icount); |
| if (ret) { |
| dev_info(trigger_data->tty->dev, "Failed to get icount, stopped polling\n"); |
| mutex_unlock(&trigger_data->mutex); |
| return; |
| } |
| |
| if (icount.rx != trigger_data->rx || |
| icount.tx != trigger_data->tx) { |
| led_set_brightness_sync(trigger_data->led_cdev, LED_ON); |
| |
| trigger_data->rx = icount.rx; |
| trigger_data->tx = icount.tx; |
| } else { |
| led_set_brightness_sync(trigger_data->led_cdev, LED_OFF); |
| } |
| |
| out: |
| mutex_unlock(&trigger_data->mutex); |
| schedule_delayed_work(&trigger_data->dwork, msecs_to_jiffies(100)); |
| } |
| |
| static struct attribute *ledtrig_tty_attrs[] = { |
| &dev_attr_ttyname.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(ledtrig_tty); |
| |
| static int ledtrig_tty_activate(struct led_classdev *led_cdev) |
| { |
| struct ledtrig_tty_data *trigger_data; |
| |
| trigger_data = kzalloc(sizeof(*trigger_data), GFP_KERNEL); |
| if (!trigger_data) |
| return -ENOMEM; |
| |
| led_set_trigger_data(led_cdev, trigger_data); |
| |
| INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work); |
| trigger_data->led_cdev = led_cdev; |
| mutex_init(&trigger_data->mutex); |
| |
| return 0; |
| } |
| |
| static void ledtrig_tty_deactivate(struct led_classdev *led_cdev) |
| { |
| struct ledtrig_tty_data *trigger_data = led_get_trigger_data(led_cdev); |
| |
| cancel_delayed_work_sync(&trigger_data->dwork); |
| |
| kfree(trigger_data); |
| } |
| |
| static struct led_trigger ledtrig_tty = { |
| .name = "tty", |
| .activate = ledtrig_tty_activate, |
| .deactivate = ledtrig_tty_deactivate, |
| .groups = ledtrig_tty_groups, |
| }; |
| module_led_trigger(ledtrig_tty); |
| |
| MODULE_AUTHOR("Uwe Kleine-König <u.kleine-koenig@pengutronix.de>"); |
| MODULE_DESCRIPTION("UART LED trigger"); |
| MODULE_LICENSE("GPL v2"); |