| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2004 Embedded Edge, LLC |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/rawnand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/platform_device.h> |
| #include <asm/io.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #include <asm/mach-au1x00/au1550nd.h> |
| |
| |
| struct au1550nd_ctx { |
| struct nand_controller controller; |
| struct nand_chip chip; |
| |
| int cs; |
| void __iomem *base; |
| }; |
| |
| static struct au1550nd_ctx *chip_to_au_ctx(struct nand_chip *this) |
| { |
| return container_of(this, struct au1550nd_ctx, chip); |
| } |
| |
| /** |
| * au_write_buf - write buffer to chip |
| * @this: NAND chip object |
| * @buf: data buffer |
| * @len: number of bytes to write |
| * |
| * write function for 8bit buswidth |
| */ |
| static void au_write_buf(struct nand_chip *this, const void *buf, |
| unsigned int len) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| const u8 *p = buf; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| writeb(p[i], ctx->base + MEM_STNAND_DATA); |
| wmb(); /* drain writebuffer */ |
| } |
| } |
| |
| /** |
| * au_read_buf - read chip data into buffer |
| * @this: NAND chip object |
| * @buf: buffer to store date |
| * @len: number of bytes to read |
| * |
| * read function for 8bit buswidth |
| */ |
| static void au_read_buf(struct nand_chip *this, void *buf, |
| unsigned int len) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| u8 *p = buf; |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| p[i] = readb(ctx->base + MEM_STNAND_DATA); |
| wmb(); /* drain writebuffer */ |
| } |
| } |
| |
| /** |
| * au_write_buf16 - write buffer to chip |
| * @this: NAND chip object |
| * @buf: data buffer |
| * @len: number of bytes to write |
| * |
| * write function for 16bit buswidth |
| */ |
| static void au_write_buf16(struct nand_chip *this, const void *buf, |
| unsigned int len) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| const u16 *p = buf; |
| unsigned int i; |
| |
| len >>= 1; |
| for (i = 0; i < len; i++) { |
| writew(p[i], ctx->base + MEM_STNAND_DATA); |
| wmb(); /* drain writebuffer */ |
| } |
| } |
| |
| /** |
| * au_read_buf16 - read chip data into buffer |
| * @this: NAND chip object |
| * @buf: buffer to store date |
| * @len: number of bytes to read |
| * |
| * read function for 16bit buswidth |
| */ |
| static void au_read_buf16(struct nand_chip *this, void *buf, unsigned int len) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| unsigned int i; |
| u16 *p = buf; |
| |
| len >>= 1; |
| for (i = 0; i < len; i++) { |
| p[i] = readw(ctx->base + MEM_STNAND_DATA); |
| wmb(); /* drain writebuffer */ |
| } |
| } |
| |
| static int find_nand_cs(unsigned long nand_base) |
| { |
| void __iomem *base = |
| (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR); |
| unsigned long addr, staddr, start, mask, end; |
| int i; |
| |
| for (i = 0; i < 4; i++) { |
| addr = 0x1000 + (i * 0x10); /* CSx */ |
| staddr = __raw_readl(base + addr + 0x08); /* STADDRx */ |
| /* figure out the decoded range of this CS */ |
| start = (staddr << 4) & 0xfffc0000; |
| mask = (staddr << 18) & 0xfffc0000; |
| end = (start | (start - 1)) & ~(start ^ mask); |
| if ((nand_base >= start) && (nand_base < end)) |
| return i; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static int au1550nd_waitrdy(struct nand_chip *this, unsigned int timeout_ms) |
| { |
| unsigned long timeout_jiffies = jiffies; |
| |
| timeout_jiffies += msecs_to_jiffies(timeout_ms) + 1; |
| do { |
| if (alchemy_rdsmem(AU1000_MEM_STSTAT) & 0x1) |
| return 0; |
| |
| usleep_range(10, 100); |
| } while (time_before(jiffies, timeout_jiffies)); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int au1550nd_exec_instr(struct nand_chip *this, |
| const struct nand_op_instr *instr) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| unsigned int i; |
| int ret = 0; |
| |
| switch (instr->type) { |
| case NAND_OP_CMD_INSTR: |
| writeb(instr->ctx.cmd.opcode, |
| ctx->base + MEM_STNAND_CMD); |
| /* Drain the writebuffer */ |
| wmb(); |
| break; |
| |
| case NAND_OP_ADDR_INSTR: |
| for (i = 0; i < instr->ctx.addr.naddrs; i++) { |
| writeb(instr->ctx.addr.addrs[i], |
| ctx->base + MEM_STNAND_ADDR); |
| /* Drain the writebuffer */ |
| wmb(); |
| } |
| break; |
| |
| case NAND_OP_DATA_IN_INSTR: |
| if ((this->options & NAND_BUSWIDTH_16) && |
| !instr->ctx.data.force_8bit) |
| au_read_buf16(this, instr->ctx.data.buf.in, |
| instr->ctx.data.len); |
| else |
| au_read_buf(this, instr->ctx.data.buf.in, |
| instr->ctx.data.len); |
| break; |
| |
| case NAND_OP_DATA_OUT_INSTR: |
| if ((this->options & NAND_BUSWIDTH_16) && |
| !instr->ctx.data.force_8bit) |
| au_write_buf16(this, instr->ctx.data.buf.out, |
| instr->ctx.data.len); |
| else |
| au_write_buf(this, instr->ctx.data.buf.out, |
| instr->ctx.data.len); |
| break; |
| |
| case NAND_OP_WAITRDY_INSTR: |
| ret = au1550nd_waitrdy(this, instr->ctx.waitrdy.timeout_ms); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (instr->delay_ns) |
| ndelay(instr->delay_ns); |
| |
| return ret; |
| } |
| |
| static int au1550nd_exec_op(struct nand_chip *this, |
| const struct nand_operation *op, |
| bool check_only) |
| { |
| struct au1550nd_ctx *ctx = chip_to_au_ctx(this); |
| unsigned int i; |
| int ret; |
| |
| if (check_only) |
| return 0; |
| |
| /* assert (force assert) chip enable */ |
| alchemy_wrsmem((1 << (4 + ctx->cs)), AU1000_MEM_STNDCTL); |
| /* Drain the writebuffer */ |
| wmb(); |
| |
| for (i = 0; i < op->ninstrs; i++) { |
| ret = au1550nd_exec_instr(this, &op->instrs[i]); |
| if (ret) |
| break; |
| } |
| |
| /* deassert chip enable */ |
| alchemy_wrsmem(0, AU1000_MEM_STNDCTL); |
| /* Drain the writebuffer */ |
| wmb(); |
| |
| return ret; |
| } |
| |
| static int au1550nd_attach_chip(struct nand_chip *chip) |
| { |
| if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT && |
| chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) |
| chip->ecc.algo = NAND_ECC_ALGO_HAMMING; |
| |
| return 0; |
| } |
| |
| static const struct nand_controller_ops au1550nd_ops = { |
| .exec_op = au1550nd_exec_op, |
| .attach_chip = au1550nd_attach_chip, |
| }; |
| |
| static int au1550nd_probe(struct platform_device *pdev) |
| { |
| struct au1550nd_platdata *pd; |
| struct au1550nd_ctx *ctx; |
| struct nand_chip *this; |
| struct mtd_info *mtd; |
| struct resource *r; |
| int ret, cs; |
| |
| pd = dev_get_platdata(&pdev->dev); |
| if (!pd) { |
| dev_err(&pdev->dev, "missing platform data\n"); |
| return -ENODEV; |
| } |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!r) { |
| dev_err(&pdev->dev, "no NAND memory resource\n"); |
| ret = -ENODEV; |
| goto out1; |
| } |
| if (request_mem_region(r->start, resource_size(r), "au1550-nand")) { |
| dev_err(&pdev->dev, "cannot claim NAND memory area\n"); |
| ret = -ENOMEM; |
| goto out1; |
| } |
| |
| ctx->base = ioremap(r->start, 0x1000); |
| if (!ctx->base) { |
| dev_err(&pdev->dev, "cannot remap NAND memory area\n"); |
| ret = -ENODEV; |
| goto out2; |
| } |
| |
| this = &ctx->chip; |
| mtd = nand_to_mtd(this); |
| mtd->dev.parent = &pdev->dev; |
| |
| /* figure out which CS# r->start belongs to */ |
| cs = find_nand_cs(r->start); |
| if (cs < 0) { |
| dev_err(&pdev->dev, "cannot detect NAND chipselect\n"); |
| ret = -ENODEV; |
| goto out3; |
| } |
| ctx->cs = cs; |
| |
| nand_controller_init(&ctx->controller); |
| ctx->controller.ops = &au1550nd_ops; |
| this->controller = &ctx->controller; |
| |
| if (pd->devwidth) |
| this->options |= NAND_BUSWIDTH_16; |
| |
| /* |
| * This driver assumes that the default ECC engine should be TYPE_SOFT. |
| * Set ->engine_type before registering the NAND devices in order to |
| * provide a driver specific default value. |
| */ |
| this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; |
| |
| ret = nand_scan(this, 1); |
| if (ret) { |
| dev_err(&pdev->dev, "NAND scan failed with %d\n", ret); |
| goto out3; |
| } |
| |
| mtd_device_register(mtd, pd->parts, pd->num_parts); |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| return 0; |
| |
| out3: |
| iounmap(ctx->base); |
| out2: |
| release_mem_region(r->start, resource_size(r)); |
| out1: |
| kfree(ctx); |
| return ret; |
| } |
| |
| static int au1550nd_remove(struct platform_device *pdev) |
| { |
| struct au1550nd_ctx *ctx = platform_get_drvdata(pdev); |
| struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct nand_chip *chip = &ctx->chip; |
| int ret; |
| |
| ret = mtd_device_unregister(nand_to_mtd(chip)); |
| WARN_ON(ret); |
| nand_cleanup(chip); |
| iounmap(ctx->base); |
| release_mem_region(r->start, 0x1000); |
| kfree(ctx); |
| return 0; |
| } |
| |
| static struct platform_driver au1550nd_driver = { |
| .driver = { |
| .name = "au1550-nand", |
| }, |
| .probe = au1550nd_probe, |
| .remove = au1550nd_remove, |
| }; |
| |
| module_platform_driver(au1550nd_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Embedded Edge, LLC"); |
| MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board"); |