| /* |
| * Page fault handler for SH with an MMU. |
| * |
| * Copyright (C) 1999 Niibe Yutaka |
| * Copyright (C) 2003 - 2007 Paul Mundt |
| * |
| * Based on linux/arch/i386/mm/fault.c: |
| * Copyright (C) 1995 Linus Torvalds |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/hardirq.h> |
| #include <linux/kprobes.h> |
| #include <asm/system.h> |
| #include <asm/mmu_context.h> |
| #include <asm/tlbflush.h> |
| #include <asm/kgdb.h> |
| |
| /* |
| * This routine handles page faults. It determines the address, |
| * and the problem, and then passes it off to one of the appropriate |
| * routines. |
| */ |
| asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, |
| unsigned long writeaccess, |
| unsigned long address) |
| { |
| struct task_struct *tsk; |
| struct mm_struct *mm; |
| struct vm_area_struct * vma; |
| unsigned long page; |
| int si_code; |
| siginfo_t info; |
| |
| trace_hardirqs_on(); |
| local_irq_enable(); |
| |
| #ifdef CONFIG_SH_KGDB |
| if (kgdb_nofault && kgdb_bus_err_hook) |
| kgdb_bus_err_hook(); |
| #endif |
| |
| tsk = current; |
| mm = tsk->mm; |
| si_code = SEGV_MAPERR; |
| |
| if (unlikely(address >= TASK_SIZE)) { |
| /* |
| * Synchronize this task's top level page-table |
| * with the 'reference' page table. |
| * |
| * Do _not_ use "tsk" here. We might be inside |
| * an interrupt in the middle of a task switch.. |
| */ |
| int offset = pgd_index(address); |
| pgd_t *pgd, *pgd_k; |
| pud_t *pud, *pud_k; |
| pmd_t *pmd, *pmd_k; |
| |
| pgd = get_TTB() + offset; |
| pgd_k = swapper_pg_dir + offset; |
| |
| /* This will never happen with the folded page table. */ |
| if (!pgd_present(*pgd)) { |
| if (!pgd_present(*pgd_k)) |
| goto bad_area_nosemaphore; |
| set_pgd(pgd, *pgd_k); |
| return; |
| } |
| |
| pud = pud_offset(pgd, address); |
| pud_k = pud_offset(pgd_k, address); |
| if (pud_present(*pud) || !pud_present(*pud_k)) |
| goto bad_area_nosemaphore; |
| set_pud(pud, *pud_k); |
| |
| pmd = pmd_offset(pud, address); |
| pmd_k = pmd_offset(pud_k, address); |
| if (pmd_present(*pmd) || !pmd_present(*pmd_k)) |
| goto bad_area_nosemaphore; |
| set_pmd(pmd, *pmd_k); |
| |
| return; |
| } |
| |
| /* |
| * If we're in an interrupt or have no user |
| * context, we must not take the fault.. |
| */ |
| if (in_atomic() || !mm) |
| goto no_context; |
| |
| down_read(&mm->mmap_sem); |
| |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| si_code = SEGV_ACCERR; |
| if (writeaccess) { |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| } else { |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) |
| goto bad_area; |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, |
| * make sure we exit gracefully rather than endlessly redo |
| * the fault. |
| */ |
| survive: |
| switch (handle_mm_fault(mm, vma, address, writeaccess)) { |
| case VM_FAULT_MINOR: |
| tsk->min_flt++; |
| break; |
| case VM_FAULT_MAJOR: |
| tsk->maj_flt++; |
| break; |
| case VM_FAULT_SIGBUS: |
| goto do_sigbus; |
| case VM_FAULT_OOM: |
| goto out_of_memory; |
| default: |
| BUG(); |
| } |
| |
| up_read(&mm->mmap_sem); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| bad_area_nosemaphore: |
| if (user_mode(regs)) { |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| info.si_code = si_code; |
| info.si_addr = (void *) address; |
| force_sig_info(SIGSEGV, &info, tsk); |
| return; |
| } |
| |
| no_context: |
| /* Are we prepared to handle this kernel fault? */ |
| if (fixup_exception(regs)) |
| return; |
| |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to |
| * terminate things with extreme prejudice. |
| * |
| */ |
| if (address < PAGE_SIZE) |
| printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); |
| else |
| printk(KERN_ALERT "Unable to handle kernel paging request"); |
| printk(" at virtual address %08lx\n", address); |
| printk(KERN_ALERT "pc = %08lx\n", regs->pc); |
| page = (unsigned long)get_TTB(); |
| if (page) { |
| page = ((unsigned long *) page)[address >> PGDIR_SHIFT]; |
| printk(KERN_ALERT "*pde = %08lx\n", page); |
| if (page & _PAGE_PRESENT) { |
| page &= PAGE_MASK; |
| address &= 0x003ff000; |
| page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT]; |
| printk(KERN_ALERT "*pte = %08lx\n", page); |
| } |
| } |
| die("Oops", regs, writeaccess); |
| do_exit(SIGKILL); |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (is_init(current)) { |
| yield(); |
| down_read(&mm->mmap_sem); |
| goto survive; |
| } |
| printk("VM: killing process %s\n", tsk->comm); |
| if (user_mode(regs)) |
| do_exit(SIGKILL); |
| goto no_context; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| info.si_signo = SIGBUS; |
| info.si_errno = 0; |
| info.si_code = BUS_ADRERR; |
| info.si_addr = (void *)address; |
| force_sig_info(SIGBUS, &info, tsk); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (!user_mode(regs)) |
| goto no_context; |
| } |
| |
| #ifdef CONFIG_SH_STORE_QUEUES |
| /* |
| * This is a special case for the SH-4 store queues, as pages for this |
| * space still need to be faulted in before it's possible to flush the |
| * store queue cache for writeout to the remapped region. |
| */ |
| #define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) |
| #else |
| #define P3_ADDR_MAX P4SEG |
| #endif |
| |
| /* |
| * Called with interrupts disabled. |
| */ |
| asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, |
| unsigned long writeaccess, |
| unsigned long address) |
| { |
| pgd_t *pgd; |
| pud_t *pud; |
| pmd_t *pmd; |
| pte_t *pte; |
| pte_t entry; |
| struct mm_struct *mm = current->mm; |
| spinlock_t *ptl = NULL; |
| int ret = 1; |
| |
| #ifdef CONFIG_SH_KGDB |
| if (kgdb_nofault && kgdb_bus_err_hook) |
| kgdb_bus_err_hook(); |
| #endif |
| |
| /* |
| * We don't take page faults for P1, P2, and parts of P4, these |
| * are always mapped, whether it be due to legacy behaviour in |
| * 29-bit mode, or due to PMB configuration in 32-bit mode. |
| */ |
| if (address >= P3SEG && address < P3_ADDR_MAX) { |
| pgd = pgd_offset_k(address); |
| mm = NULL; |
| } else { |
| if (unlikely(address >= TASK_SIZE || !mm)) |
| return 1; |
| |
| pgd = pgd_offset(mm, address); |
| } |
| |
| pud = pud_offset(pgd, address); |
| if (pud_none_or_clear_bad(pud)) |
| return 1; |
| pmd = pmd_offset(pud, address); |
| if (pmd_none_or_clear_bad(pmd)) |
| return 1; |
| |
| if (mm) |
| pte = pte_offset_map_lock(mm, pmd, address, &ptl); |
| else |
| pte = pte_offset_kernel(pmd, address); |
| |
| entry = *pte; |
| if (unlikely(pte_none(entry) || pte_not_present(entry))) |
| goto unlock; |
| if (unlikely(writeaccess && !pte_write(entry))) |
| goto unlock; |
| |
| if (writeaccess) |
| entry = pte_mkdirty(entry); |
| entry = pte_mkyoung(entry); |
| |
| #ifdef CONFIG_CPU_SH4 |
| /* |
| * ITLB is not affected by "ldtlb" instruction. |
| * So, we need to flush the entry by ourselves. |
| */ |
| local_flush_tlb_one(get_asid(), address & PAGE_MASK); |
| #endif |
| |
| set_pte(pte, entry); |
| update_mmu_cache(NULL, address, entry); |
| ret = 0; |
| unlock: |
| if (mm) |
| pte_unmap_unlock(pte, ptl); |
| return ret; |
| } |