| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Driver for Phoenix RC Flight Controller Adapter | 
 |  * | 
 |  * Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com> | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb/input.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/input.h> | 
 |  | 
 | #define PXRC_VENDOR_ID	(0x1781) | 
 | #define PXRC_PRODUCT_ID	(0x0898) | 
 |  | 
 | static const struct usb_device_id pxrc_table[] = { | 
 | 	{ USB_DEVICE(PXRC_VENDOR_ID, PXRC_PRODUCT_ID) }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, pxrc_table); | 
 |  | 
 | struct pxrc { | 
 | 	struct input_dev	*input; | 
 | 	struct usb_device	*udev; | 
 | 	struct usb_interface	*intf; | 
 | 	struct urb		*urb; | 
 | 	struct mutex		pm_mutex; | 
 | 	bool			is_open; | 
 | 	__u8			epaddr; | 
 | 	char			phys[64]; | 
 | 	unsigned char           *data; | 
 | 	size_t			bsize; | 
 | }; | 
 |  | 
 | static void pxrc_usb_irq(struct urb *urb) | 
 | { | 
 | 	struct pxrc *pxrc = urb->context; | 
 | 	int error; | 
 |  | 
 | 	switch (urb->status) { | 
 | 	case 0: | 
 | 		/* success */ | 
 | 		break; | 
 | 	case -ETIME: | 
 | 		/* this urb is timing out */ | 
 | 		dev_dbg(&pxrc->intf->dev, | 
 | 			"%s - urb timed out - was the device unplugged?\n", | 
 | 			__func__); | 
 | 		return; | 
 | 	case -ECONNRESET: | 
 | 	case -ENOENT: | 
 | 	case -ESHUTDOWN: | 
 | 	case -EPIPE: | 
 | 		/* this urb is terminated, clean up */ | 
 | 		dev_dbg(&pxrc->intf->dev, "%s - urb shutting down with status: %d\n", | 
 | 			__func__, urb->status); | 
 | 		return; | 
 | 	default: | 
 | 		dev_dbg(&pxrc->intf->dev, "%s - nonzero urb status received: %d\n", | 
 | 			__func__, urb->status); | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	if (urb->actual_length == 8) { | 
 | 		input_report_abs(pxrc->input, ABS_X, pxrc->data[0]); | 
 | 		input_report_abs(pxrc->input, ABS_Y, pxrc->data[2]); | 
 | 		input_report_abs(pxrc->input, ABS_RX, pxrc->data[3]); | 
 | 		input_report_abs(pxrc->input, ABS_RY, pxrc->data[4]); | 
 | 		input_report_abs(pxrc->input, ABS_RUDDER, pxrc->data[5]); | 
 | 		input_report_abs(pxrc->input, ABS_THROTTLE, pxrc->data[6]); | 
 | 		input_report_abs(pxrc->input, ABS_MISC, pxrc->data[7]); | 
 |  | 
 | 		input_report_key(pxrc->input, BTN_A, pxrc->data[1]); | 
 | 	} | 
 |  | 
 | exit: | 
 | 	/* Resubmit to fetch new fresh URBs */ | 
 | 	error = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 	if (error && error != -EPERM) | 
 | 		dev_err(&pxrc->intf->dev, | 
 | 			"%s - usb_submit_urb failed with result: %d", | 
 | 			__func__, error); | 
 | } | 
 |  | 
 | static int pxrc_open(struct input_dev *input) | 
 | { | 
 | 	struct pxrc *pxrc = input_get_drvdata(input); | 
 | 	int retval; | 
 |  | 
 | 	mutex_lock(&pxrc->pm_mutex); | 
 | 	retval = usb_submit_urb(pxrc->urb, GFP_KERNEL); | 
 | 	if (retval) { | 
 | 		dev_err(&pxrc->intf->dev, | 
 | 			"%s - usb_submit_urb failed, error: %d\n", | 
 | 			__func__, retval); | 
 | 		retval = -EIO; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	pxrc->is_open = true; | 
 |  | 
 | out: | 
 | 	mutex_unlock(&pxrc->pm_mutex); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void pxrc_close(struct input_dev *input) | 
 | { | 
 | 	struct pxrc *pxrc = input_get_drvdata(input); | 
 |  | 
 | 	mutex_lock(&pxrc->pm_mutex); | 
 | 	usb_kill_urb(pxrc->urb); | 
 | 	pxrc->is_open = false; | 
 | 	mutex_unlock(&pxrc->pm_mutex); | 
 | } | 
 |  | 
 | static int pxrc_usb_init(struct pxrc *pxrc) | 
 | { | 
 | 	struct usb_endpoint_descriptor *epirq; | 
 | 	unsigned int pipe; | 
 | 	int retval; | 
 |  | 
 | 	/* Set up the endpoint information */ | 
 | 	/* This device only has an interrupt endpoint */ | 
 | 	retval = usb_find_common_endpoints(pxrc->intf->cur_altsetting, | 
 | 			NULL, NULL, &epirq, NULL); | 
 | 	if (retval) { | 
 | 		dev_err(&pxrc->intf->dev, | 
 | 			"Could not find endpoint\n"); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	pxrc->bsize = usb_endpoint_maxp(epirq); | 
 | 	pxrc->epaddr = epirq->bEndpointAddress; | 
 | 	pxrc->data = devm_kmalloc(&pxrc->intf->dev, pxrc->bsize, GFP_KERNEL); | 
 | 	if (!pxrc->data) { | 
 | 		retval = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	usb_set_intfdata(pxrc->intf, pxrc); | 
 | 	usb_make_path(pxrc->udev, pxrc->phys, sizeof(pxrc->phys)); | 
 | 	strlcat(pxrc->phys, "/input0", sizeof(pxrc->phys)); | 
 |  | 
 | 	pxrc->urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!pxrc->urb) { | 
 | 		retval = -ENOMEM; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	pipe = usb_rcvintpipe(pxrc->udev, pxrc->epaddr), | 
 | 	usb_fill_int_urb(pxrc->urb, pxrc->udev, pipe, pxrc->data, pxrc->bsize, | 
 | 						pxrc_usb_irq, pxrc, 1); | 
 |  | 
 | error: | 
 | 	return retval; | 
 |  | 
 |  | 
 | } | 
 |  | 
 | static int pxrc_input_init(struct pxrc *pxrc) | 
 | { | 
 | 	pxrc->input = devm_input_allocate_device(&pxrc->intf->dev); | 
 | 	if (pxrc->input == NULL) { | 
 | 		dev_err(&pxrc->intf->dev, "couldn't allocate input device\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	pxrc->input->name = "PXRC Flight Controller Adapter"; | 
 | 	pxrc->input->phys = pxrc->phys; | 
 | 	usb_to_input_id(pxrc->udev, &pxrc->input->id); | 
 |  | 
 | 	pxrc->input->open = pxrc_open; | 
 | 	pxrc->input->close = pxrc_close; | 
 |  | 
 | 	input_set_capability(pxrc->input, EV_KEY, BTN_A); | 
 | 	input_set_abs_params(pxrc->input, ABS_X, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_Y, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_RX, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_RY, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_RUDDER, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_THROTTLE, 0, 255, 0, 0); | 
 | 	input_set_abs_params(pxrc->input, ABS_MISC, 0, 255, 0, 0); | 
 |  | 
 | 	input_set_drvdata(pxrc->input, pxrc); | 
 |  | 
 | 	return input_register_device(pxrc->input); | 
 | } | 
 |  | 
 | static int pxrc_probe(struct usb_interface *intf, | 
 | 		      const struct usb_device_id *id) | 
 | { | 
 | 	struct pxrc *pxrc; | 
 | 	int retval; | 
 |  | 
 | 	pxrc = devm_kzalloc(&intf->dev, sizeof(*pxrc), GFP_KERNEL); | 
 | 	if (!pxrc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_init(&pxrc->pm_mutex); | 
 | 	pxrc->udev = usb_get_dev(interface_to_usbdev(intf)); | 
 | 	pxrc->intf = intf; | 
 |  | 
 | 	retval = pxrc_usb_init(pxrc); | 
 | 	if (retval) | 
 | 		goto error; | 
 |  | 
 | 	retval = pxrc_input_init(pxrc); | 
 | 	if (retval) | 
 | 		goto err_free_urb; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_urb: | 
 | 	usb_free_urb(pxrc->urb); | 
 |  | 
 | error: | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void pxrc_disconnect(struct usb_interface *intf) | 
 | { | 
 | 	struct pxrc *pxrc = usb_get_intfdata(intf); | 
 |  | 
 | 	usb_free_urb(pxrc->urb); | 
 | 	usb_set_intfdata(intf, NULL); | 
 | } | 
 |  | 
 | static int pxrc_suspend(struct usb_interface *intf, pm_message_t message) | 
 | { | 
 | 	struct pxrc *pxrc = usb_get_intfdata(intf); | 
 |  | 
 | 	mutex_lock(&pxrc->pm_mutex); | 
 | 	if (pxrc->is_open) | 
 | 		usb_kill_urb(pxrc->urb); | 
 | 	mutex_unlock(&pxrc->pm_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pxrc_resume(struct usb_interface *intf) | 
 | { | 
 | 	struct pxrc *pxrc = usb_get_intfdata(intf); | 
 | 	int retval = 0; | 
 |  | 
 | 	mutex_lock(&pxrc->pm_mutex); | 
 | 	if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0) | 
 | 		retval = -EIO; | 
 |  | 
 | 	mutex_unlock(&pxrc->pm_mutex); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int pxrc_pre_reset(struct usb_interface *intf) | 
 | { | 
 | 	struct pxrc *pxrc = usb_get_intfdata(intf); | 
 |  | 
 | 	mutex_lock(&pxrc->pm_mutex); | 
 | 	usb_kill_urb(pxrc->urb); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pxrc_post_reset(struct usb_interface *intf) | 
 | { | 
 | 	struct pxrc *pxrc = usb_get_intfdata(intf); | 
 | 	int retval = 0; | 
 |  | 
 | 	if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0) | 
 | 		retval = -EIO; | 
 |  | 
 | 	mutex_unlock(&pxrc->pm_mutex); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int pxrc_reset_resume(struct usb_interface *intf) | 
 | { | 
 | 	return pxrc_resume(intf); | 
 | } | 
 |  | 
 | static struct usb_driver pxrc_driver = { | 
 | 	.name =		"pxrc", | 
 | 	.probe =	pxrc_probe, | 
 | 	.disconnect =	pxrc_disconnect, | 
 | 	.id_table =	pxrc_table, | 
 | 	.suspend	= pxrc_suspend, | 
 | 	.resume		= pxrc_resume, | 
 | 	.pre_reset	= pxrc_pre_reset, | 
 | 	.post_reset	= pxrc_post_reset, | 
 | 	.reset_resume	= pxrc_reset_resume, | 
 | }; | 
 |  | 
 | module_usb_driver(pxrc_driver); | 
 |  | 
 | MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>"); | 
 | MODULE_DESCRIPTION("PhoenixRC Flight Controller Adapter"); | 
 | MODULE_LICENSE("GPL v2"); |