| /* | 
 |  *  Copyright (c) 1999-2001 Vojtech Pavlik | 
 |  * | 
 |  *  Based on the work of: | 
 |  *	David Thompson | 
 |  */ | 
 |  | 
 | /* | 
 |  * SpaceTec SpaceOrb 360 and Avenger 6dof controller driver for Linux | 
 |  */ | 
 |  | 
 | /* | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
 |  * | 
 |  *  Should you need to contact me, the author, you can do so either by | 
 |  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: | 
 |  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/input.h> | 
 | #include <linux/serio.h> | 
 |  | 
 | #define DRIVER_DESC	"SpaceTec SpaceOrb 360 and Avenger 6dof controller driver" | 
 |  | 
 | MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* | 
 |  * Constants. | 
 |  */ | 
 |  | 
 | #define SPACEORB_MAX_LENGTH	64 | 
 |  | 
 | static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A }; | 
 | static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ }; | 
 |  | 
 | /* | 
 |  * Per-Orb data. | 
 |  */ | 
 |  | 
 | struct spaceorb { | 
 | 	struct input_dev *dev; | 
 | 	int idx; | 
 | 	unsigned char data[SPACEORB_MAX_LENGTH]; | 
 | 	char phys[32]; | 
 | }; | 
 |  | 
 | static unsigned char spaceorb_xor[] = "SpaceWare"; | 
 |  | 
 | static unsigned char *spaceorb_errors[] = { "EEPROM storing 0 failed", "Receive queue overflow", "Transmit queue timeout", | 
 | 		"Bad packet", "Power brown-out", "EEPROM checksum error", "Hardware fault" }; | 
 |  | 
 | /* | 
 |  * spaceorb_process_packet() decodes packets the driver receives from the | 
 |  * SpaceOrb. | 
 |  */ | 
 |  | 
 | static void spaceorb_process_packet(struct spaceorb *spaceorb) | 
 | { | 
 | 	struct input_dev *dev = spaceorb->dev; | 
 | 	unsigned char *data = spaceorb->data; | 
 | 	unsigned char c = 0; | 
 | 	int axes[6]; | 
 | 	int i; | 
 |  | 
 | 	if (spaceorb->idx < 2) return; | 
 | 	for (i = 0; i < spaceorb->idx; i++) c ^= data[i]; | 
 | 	if (c) return; | 
 |  | 
 | 	switch (data[0]) { | 
 |  | 
 | 		case 'R':				/* Reset packet */ | 
 | 			spaceorb->data[spaceorb->idx - 1] = 0; | 
 | 			for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++); | 
 | 			printk(KERN_INFO "input: %s [%s] is %s\n", | 
 | 				 dev->name, spaceorb->data + i, spaceorb->phys); | 
 | 			break; | 
 |  | 
 | 		case 'D':				/* Ball + button data */ | 
 | 			if (spaceorb->idx != 12) return; | 
 | 			for (i = 0; i < 9; i++) spaceorb->data[i+2] ^= spaceorb_xor[i]; | 
 | 			axes[0] = ( data[2]	 << 3) | (data[ 3] >> 4); | 
 | 			axes[1] = ((data[3] & 0x0f) << 6) | (data[ 4] >> 1); | 
 | 			axes[2] = ((data[4] & 0x01) << 9) | (data[ 5] << 2) | (data[4] >> 5); | 
 | 			axes[3] = ((data[6] & 0x1f) << 5) | (data[ 7] >> 2); | 
 | 			axes[4] = ((data[7] & 0x03) << 8) | (data[ 8] << 1) | (data[7] >> 6); | 
 | 			axes[5] = ((data[9] & 0x3f) << 4) | (data[10] >> 3); | 
 | 			for (i = 0; i < 6; i++) | 
 | 				input_report_abs(dev, spaceorb_axes[i], axes[i] - ((axes[i] & 0x200) ? 1024 : 0)); | 
 | 			for (i = 0; i < 6; i++) | 
 | 				input_report_key(dev, spaceorb_buttons[i], (data[1] >> i) & 1); | 
 | 			break; | 
 |  | 
 | 		case 'K':				/* Button data */ | 
 | 			if (spaceorb->idx != 5) return; | 
 | 			for (i = 0; i < 6; i++) | 
 | 				input_report_key(dev, spaceorb_buttons[i], (data[2] >> i) & 1); | 
 |  | 
 | 			break; | 
 |  | 
 | 		case 'E':				/* Error packet */ | 
 | 			if (spaceorb->idx != 4) return; | 
 | 			printk(KERN_ERR "spaceorb: Device error. [ "); | 
 | 			for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]); | 
 | 			printk("]\n"); | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	input_sync(dev); | 
 | } | 
 |  | 
 | static irqreturn_t spaceorb_interrupt(struct serio *serio, | 
 | 		unsigned char data, unsigned int flags) | 
 | { | 
 | 	struct spaceorb* spaceorb = serio_get_drvdata(serio); | 
 |  | 
 | 	if (~data & 0x80) { | 
 | 		if (spaceorb->idx) spaceorb_process_packet(spaceorb); | 
 | 		spaceorb->idx = 0; | 
 | 	} | 
 | 	if (spaceorb->idx < SPACEORB_MAX_LENGTH) | 
 | 		spaceorb->data[spaceorb->idx++] = data & 0x7f; | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* | 
 |  * spaceorb_disconnect() is the opposite of spaceorb_connect() | 
 |  */ | 
 |  | 
 | static void spaceorb_disconnect(struct serio *serio) | 
 | { | 
 | 	struct spaceorb* spaceorb = serio_get_drvdata(serio); | 
 |  | 
 | 	serio_close(serio); | 
 | 	serio_set_drvdata(serio, NULL); | 
 | 	input_unregister_device(spaceorb->dev); | 
 | 	kfree(spaceorb); | 
 | } | 
 |  | 
 | /* | 
 |  * spaceorb_connect() is the routine that is called when someone adds a | 
 |  * new serio device that supports SpaceOrb/Avenger protocol and registers | 
 |  * it as an input device. | 
 |  */ | 
 |  | 
 | static int spaceorb_connect(struct serio *serio, struct serio_driver *drv) | 
 | { | 
 | 	struct spaceorb *spaceorb; | 
 | 	struct input_dev *input_dev; | 
 | 	int err = -ENOMEM; | 
 | 	int i; | 
 |  | 
 | 	spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL); | 
 | 	input_dev = input_allocate_device(); | 
 | 	if (!spaceorb || !input_dev) | 
 | 		goto fail1; | 
 |  | 
 | 	spaceorb->dev = input_dev; | 
 | 	snprintf(spaceorb->phys, sizeof(spaceorb->phys), "%s/input0", serio->phys); | 
 |  | 
 | 	input_dev->name = "SpaceTec SpaceOrb 360 / Avenger"; | 
 | 	input_dev->phys = spaceorb->phys; | 
 | 	input_dev->id.bustype = BUS_RS232; | 
 | 	input_dev->id.vendor = SERIO_SPACEORB; | 
 | 	input_dev->id.product = 0x0001; | 
 | 	input_dev->id.version = 0x0100; | 
 | 	input_dev->dev.parent = &serio->dev; | 
 |  | 
 | 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); | 
 |  | 
 | 	for (i = 0; i < 6; i++) | 
 | 		set_bit(spaceorb_buttons[i], input_dev->keybit); | 
 |  | 
 | 	for (i = 0; i < 6; i++) | 
 | 		input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0); | 
 |  | 
 | 	serio_set_drvdata(serio, spaceorb); | 
 |  | 
 | 	err = serio_open(serio, drv); | 
 | 	if (err) | 
 | 		goto fail2; | 
 |  | 
 | 	err = input_register_device(spaceorb->dev); | 
 | 	if (err) | 
 | 		goto fail3; | 
 |  | 
 | 	return 0; | 
 |  | 
 |  fail3:	serio_close(serio); | 
 |  fail2:	serio_set_drvdata(serio, NULL); | 
 |  fail1:	input_free_device(input_dev); | 
 | 	kfree(spaceorb); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * The serio driver structure. | 
 |  */ | 
 |  | 
 | static const struct serio_device_id spaceorb_serio_ids[] = { | 
 | 	{ | 
 | 		.type	= SERIO_RS232, | 
 | 		.proto	= SERIO_SPACEORB, | 
 | 		.id	= SERIO_ANY, | 
 | 		.extra	= SERIO_ANY, | 
 | 	}, | 
 | 	{ 0 } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(serio, spaceorb_serio_ids); | 
 |  | 
 | static struct serio_driver spaceorb_drv = { | 
 | 	.driver		= { | 
 | 		.name	= "spaceorb", | 
 | 	}, | 
 | 	.description	= DRIVER_DESC, | 
 | 	.id_table	= spaceorb_serio_ids, | 
 | 	.interrupt	= spaceorb_interrupt, | 
 | 	.connect	= spaceorb_connect, | 
 | 	.disconnect	= spaceorb_disconnect, | 
 | }; | 
 |  | 
 | module_serio_driver(spaceorb_drv); |