| /******************************************************************* |
| * This file is part of the Emulex Linux Device Driver for * |
| * Fibre Channel Host Bus Adapters. * |
| * Copyright (C) 2004-2005 Emulex. All rights reserved. * |
| * EMULEX and SLI are trademarks of Emulex. * |
| * www.emulex.com * |
| * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| * * |
| * This program is free software; you can redistribute it and/or * |
| * modify it under the terms of version 2 of the GNU General * |
| * Public License as published by the Free Software Foundation. * |
| * This program is distributed in the hope that it will be useful. * |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| * more details, a copy of which can be found in the file COPYING * |
| * included with this package. * |
| *******************************************************************/ |
| |
| #include <linux/blkdev.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_transport_fc.h> |
| |
| #include <scsi/scsi.h> |
| |
| #include "lpfc_hw.h" |
| #include "lpfc_sli.h" |
| #include "lpfc_disc.h" |
| #include "lpfc_scsi.h" |
| #include "lpfc.h" |
| #include "lpfc_logmsg.h" |
| #include "lpfc_crtn.h" |
| #include "lpfc_compat.h" |
| |
| /**********************************************/ |
| |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) |
| { |
| MAILBOX_t *mb; |
| void *ctx; |
| |
| mb = &pmb->mb; |
| ctx = pmb->context2; |
| |
| /* Setup to dump VPD region */ |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| mb->mbxCommand = MBX_DUMP_MEMORY; |
| mb->un.varDmp.cv = 1; |
| mb->un.varDmp.type = DMP_NV_PARAMS; |
| mb->un.varDmp.entry_index = offset; |
| mb->un.varDmp.region_id = DMP_REGION_VPD; |
| mb->un.varDmp.word_cnt = (DMP_RSP_SIZE / sizeof (uint32_t)); |
| mb->un.varDmp.co = 0; |
| mb->un.varDmp.resp_offset = 0; |
| pmb->context2 = ctx; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /**********************************************/ |
| /* lpfc_read_nv Issue a READ NVPARAM */ |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| mb->mbxCommand = MBX_READ_NV; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /**********************************************/ |
| /* lpfc_read_la Issue a READ LA */ |
| /* mailbox command */ |
| /**********************************************/ |
| int |
| lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp) |
| { |
| MAILBOX_t *mb; |
| struct lpfc_sli *psli; |
| |
| psli = &phba->sli; |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| INIT_LIST_HEAD(&mp->list); |
| mb->mbxCommand = MBX_READ_LA64; |
| mb->un.varReadLA.un.lilpBde64.tus.f.bdeSize = 128; |
| mb->un.varReadLA.un.lilpBde64.addrHigh = putPaddrHigh(mp->phys); |
| mb->un.varReadLA.un.lilpBde64.addrLow = putPaddrLow(mp->phys); |
| |
| /* Save address for later completion and set the owner to host so that |
| * the FW knows this mailbox is available for processing. |
| */ |
| pmb->context1 = (uint8_t *) mp; |
| mb->mbxOwner = OWN_HOST; |
| return (0); |
| } |
| |
| /**********************************************/ |
| /* lpfc_clear_la Issue a CLEAR LA */ |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->un.varClearLA.eventTag = phba->fc_eventTag; |
| mb->mbxCommand = MBX_CLEAR_LA; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /**************************************************/ |
| /* lpfc_config_link Issue a CONFIG LINK */ |
| /* mailbox command */ |
| /**************************************************/ |
| void |
| lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| /* NEW_FEATURE |
| * SLI-2, Coalescing Response Feature. |
| */ |
| if (phba->cfg_cr_delay) { |
| mb->un.varCfgLnk.cr = 1; |
| mb->un.varCfgLnk.ci = 1; |
| mb->un.varCfgLnk.cr_delay = phba->cfg_cr_delay; |
| mb->un.varCfgLnk.cr_count = phba->cfg_cr_count; |
| } |
| |
| mb->un.varCfgLnk.myId = phba->fc_myDID; |
| mb->un.varCfgLnk.edtov = phba->fc_edtov; |
| mb->un.varCfgLnk.arbtov = phba->fc_arbtov; |
| mb->un.varCfgLnk.ratov = phba->fc_ratov; |
| mb->un.varCfgLnk.rttov = phba->fc_rttov; |
| mb->un.varCfgLnk.altov = phba->fc_altov; |
| mb->un.varCfgLnk.crtov = phba->fc_crtov; |
| mb->un.varCfgLnk.citov = phba->fc_citov; |
| |
| if (phba->cfg_ack0) |
| mb->un.varCfgLnk.ack0_enable = 1; |
| |
| mb->mbxCommand = MBX_CONFIG_LINK; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /**********************************************/ |
| /* lpfc_init_link Issue an INIT LINK */ |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_init_link(struct lpfc_hba * phba, |
| LPFC_MBOXQ_t * pmb, uint32_t topology, uint32_t linkspeed) |
| { |
| lpfc_vpd_t *vpd; |
| struct lpfc_sli *psli; |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| psli = &phba->sli; |
| switch (topology) { |
| case FLAGS_TOPOLOGY_MODE_LOOP_PT: |
| mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP; |
| mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER; |
| break; |
| case FLAGS_TOPOLOGY_MODE_PT_PT: |
| mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; |
| break; |
| case FLAGS_TOPOLOGY_MODE_LOOP: |
| mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_LOOP; |
| break; |
| case FLAGS_TOPOLOGY_MODE_PT_LOOP: |
| mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT; |
| mb->un.varInitLnk.link_flags |= FLAGS_TOPOLOGY_FAILOVER; |
| break; |
| } |
| |
| /* NEW_FEATURE |
| * Setting up the link speed |
| */ |
| vpd = &phba->vpd; |
| if (vpd->rev.feaLevelHigh >= 0x02){ |
| switch(linkspeed){ |
| case LINK_SPEED_1G: |
| case LINK_SPEED_2G: |
| case LINK_SPEED_4G: |
| mb->un.varInitLnk.link_flags |= |
| FLAGS_LINK_SPEED; |
| mb->un.varInitLnk.link_speed = linkspeed; |
| break; |
| case LINK_SPEED_AUTO: |
| default: |
| mb->un.varInitLnk.link_speed = |
| LINK_SPEED_AUTO; |
| break; |
| } |
| |
| } |
| else |
| mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO; |
| |
| mb->mbxCommand = (volatile uint8_t)MBX_INIT_LINK; |
| mb->mbxOwner = OWN_HOST; |
| mb->un.varInitLnk.fabric_AL_PA = phba->fc_pref_ALPA; |
| return; |
| } |
| |
| /**********************************************/ |
| /* lpfc_read_sparam Issue a READ SPARAM */ |
| /* mailbox command */ |
| /**********************************************/ |
| int |
| lpfc_read_sparam(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| struct lpfc_dmabuf *mp; |
| MAILBOX_t *mb; |
| struct lpfc_sli *psli; |
| |
| psli = &phba->sli; |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->mbxOwner = OWN_HOST; |
| |
| /* Get a buffer to hold the HBAs Service Parameters */ |
| |
| if (((mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL)) == 0) || |
| ((mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys))) == 0)) { |
| if (mp) |
| kfree(mp); |
| mb->mbxCommand = MBX_READ_SPARM64; |
| /* READ_SPARAM: no buffers */ |
| lpfc_printf_log(phba, |
| KERN_WARNING, |
| LOG_MBOX, |
| "%d:0301 READ_SPARAM: no buffers\n", |
| phba->brd_no); |
| return (1); |
| } |
| INIT_LIST_HEAD(&mp->list); |
| mb->mbxCommand = MBX_READ_SPARM64; |
| mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); |
| mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); |
| mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); |
| |
| /* save address for completion */ |
| pmb->context1 = mp; |
| |
| return (0); |
| } |
| |
| /********************************************/ |
| /* lpfc_unreg_did Issue a UNREG_DID */ |
| /* mailbox command */ |
| /********************************************/ |
| void |
| lpfc_unreg_did(struct lpfc_hba * phba, uint32_t did, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->un.varUnregDID.did = did; |
| |
| mb->mbxCommand = MBX_UNREG_D_ID; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /***********************************************/ |
| |
| /* command to write slim */ |
| /***********************************************/ |
| void |
| lpfc_set_slim(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t addr, |
| uint32_t value) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| /* addr = 0x090597 is AUTO ABTS disable for ELS commands */ |
| /* addr = 0x052198 is DELAYED ABTS enable for ELS commands */ |
| |
| /* |
| * Always turn on DELAYED ABTS for ELS timeouts |
| */ |
| if ((addr == 0x052198) && (value == 0)) |
| value = 1; |
| |
| mb->un.varWords[0] = addr; |
| mb->un.varWords[1] = value; |
| |
| mb->mbxCommand = MBX_SET_SLIM; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /**********************************************/ |
| /* lpfc_read_nv Issue a READ CONFIG */ |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->mbxCommand = MBX_READ_CONFIG; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| /********************************************/ |
| /* lpfc_reg_login Issue a REG_LOGIN */ |
| /* mailbox command */ |
| /********************************************/ |
| int |
| lpfc_reg_login(struct lpfc_hba * phba, |
| uint32_t did, uint8_t * param, LPFC_MBOXQ_t * pmb, uint32_t flag) |
| { |
| uint8_t *sparam; |
| struct lpfc_dmabuf *mp; |
| MAILBOX_t *mb; |
| struct lpfc_sli *psli; |
| |
| psli = &phba->sli; |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->un.varRegLogin.rpi = 0; |
| mb->un.varRegLogin.did = did; |
| mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */ |
| |
| mb->mbxOwner = OWN_HOST; |
| |
| /* Get a buffer to hold NPorts Service Parameters */ |
| if (((mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL)) == NULL) || |
| ((mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys))) == 0)) { |
| if (mp) |
| kfree(mp); |
| |
| mb->mbxCommand = MBX_REG_LOGIN64; |
| /* REG_LOGIN: no buffers */ |
| lpfc_printf_log(phba, |
| KERN_WARNING, |
| LOG_MBOX, |
| "%d:0302 REG_LOGIN: no buffers Data x%x x%x\n", |
| phba->brd_no, |
| (uint32_t) did, (uint32_t) flag); |
| return (1); |
| } |
| INIT_LIST_HEAD(&mp->list); |
| sparam = mp->virt; |
| |
| /* Copy param's into a new buffer */ |
| memcpy(sparam, param, sizeof (struct serv_parm)); |
| |
| /* save address for completion */ |
| pmb->context1 = (uint8_t *) mp; |
| |
| mb->mbxCommand = MBX_REG_LOGIN64; |
| mb->un.varRegLogin.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); |
| mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys); |
| mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys); |
| |
| return (0); |
| } |
| |
| /**********************************************/ |
| /* lpfc_unreg_login Issue a UNREG_LOGIN */ |
| /* mailbox command */ |
| /**********************************************/ |
| void |
| lpfc_unreg_login(struct lpfc_hba * phba, uint32_t rpi, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->un.varUnregLogin.rpi = (uint16_t) rpi; |
| mb->un.varUnregLogin.rsvd1 = 0; |
| |
| mb->mbxCommand = MBX_UNREG_LOGIN; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| static void |
| lpfc_config_pcb_setup(struct lpfc_hba * phba) |
| { |
| struct lpfc_sli *psli = &phba->sli; |
| struct lpfc_sli_ring *pring; |
| PCB_t *pcbp = &phba->slim2p->pcb; |
| dma_addr_t pdma_addr; |
| uint32_t offset; |
| uint32_t iocbCnt; |
| int i; |
| |
| pcbp->maxRing = (psli->num_rings - 1); |
| |
| iocbCnt = 0; |
| for (i = 0; i < psli->num_rings; i++) { |
| pring = &psli->ring[i]; |
| /* A ring MUST have both cmd and rsp entries defined to be |
| valid */ |
| if ((pring->numCiocb == 0) || (pring->numRiocb == 0)) { |
| pcbp->rdsc[i].cmdEntries = 0; |
| pcbp->rdsc[i].rspEntries = 0; |
| pcbp->rdsc[i].cmdAddrHigh = 0; |
| pcbp->rdsc[i].rspAddrHigh = 0; |
| pcbp->rdsc[i].cmdAddrLow = 0; |
| pcbp->rdsc[i].rspAddrLow = 0; |
| pring->cmdringaddr = NULL; |
| pring->rspringaddr = NULL; |
| continue; |
| } |
| /* Command ring setup for ring */ |
| pring->cmdringaddr = |
| (void *)&phba->slim2p->IOCBs[iocbCnt]; |
| pcbp->rdsc[i].cmdEntries = pring->numCiocb; |
| |
| offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] - |
| (uint8_t *)phba->slim2p; |
| pdma_addr = phba->slim2p_mapping + offset; |
| pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr); |
| pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr); |
| iocbCnt += pring->numCiocb; |
| |
| /* Response ring setup for ring */ |
| pring->rspringaddr = |
| (void *)&phba->slim2p->IOCBs[iocbCnt]; |
| |
| pcbp->rdsc[i].rspEntries = pring->numRiocb; |
| offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] - |
| (uint8_t *)phba->slim2p; |
| pdma_addr = phba->slim2p_mapping + offset; |
| pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr); |
| pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr); |
| iocbCnt += pring->numRiocb; |
| } |
| } |
| |
| void |
| lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb; |
| |
| mb = &pmb->mb; |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| mb->un.varRdRev.cv = 1; |
| mb->mbxCommand = MBX_READ_REV; |
| mb->mbxOwner = OWN_HOST; |
| return; |
| } |
| |
| void |
| lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb) |
| { |
| int i; |
| MAILBOX_t *mb = &pmb->mb; |
| struct lpfc_sli *psli; |
| struct lpfc_sli_ring *pring; |
| |
| memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); |
| |
| mb->un.varCfgRing.ring = ring; |
| mb->un.varCfgRing.maxOrigXchg = 0; |
| mb->un.varCfgRing.maxRespXchg = 0; |
| mb->un.varCfgRing.recvNotify = 1; |
| |
| psli = &phba->sli; |
| pring = &psli->ring[ring]; |
| mb->un.varCfgRing.numMask = pring->num_mask; |
| mb->mbxCommand = MBX_CONFIG_RING; |
| mb->mbxOwner = OWN_HOST; |
| |
| /* Is this ring configured for a specific profile */ |
| if (pring->prt[0].profile) { |
| mb->un.varCfgRing.profile = pring->prt[0].profile; |
| return; |
| } |
| |
| /* Otherwise we setup specific rctl / type masks for this ring */ |
| for (i = 0; i < pring->num_mask; i++) { |
| mb->un.varCfgRing.rrRegs[i].rval = pring->prt[i].rctl; |
| if (mb->un.varCfgRing.rrRegs[i].rval != FC_ELS_REQ) |
| mb->un.varCfgRing.rrRegs[i].rmask = 0xff; |
| else |
| mb->un.varCfgRing.rrRegs[i].rmask = 0xfe; |
| mb->un.varCfgRing.rrRegs[i].tval = pring->prt[i].type; |
| mb->un.varCfgRing.rrRegs[i].tmask = 0xff; |
| } |
| |
| return; |
| } |
| |
| void |
| lpfc_config_port(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) |
| { |
| MAILBOX_t *mb = &pmb->mb; |
| dma_addr_t pdma_addr; |
| uint32_t bar_low, bar_high; |
| size_t offset; |
| struct lpfc_hgp hgp; |
| void __iomem *to_slim; |
| |
| memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); |
| mb->mbxCommand = MBX_CONFIG_PORT; |
| mb->mbxOwner = OWN_HOST; |
| |
| mb->un.varCfgPort.pcbLen = sizeof(PCB_t); |
| |
| offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p; |
| pdma_addr = phba->slim2p_mapping + offset; |
| mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); |
| mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); |
| |
| /* Now setup pcb */ |
| phba->slim2p->pcb.type = TYPE_NATIVE_SLI2; |
| phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2; |
| |
| /* Setup Mailbox pointers */ |
| phba->slim2p->pcb.mailBoxSize = sizeof(MAILBOX_t); |
| offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p; |
| pdma_addr = phba->slim2p_mapping + offset; |
| phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr); |
| phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr); |
| |
| /* |
| * Setup Host Group ring pointer. |
| * |
| * For efficiency reasons, the ring get/put pointers can be |
| * placed in adapter memory (SLIM) rather than in host memory. |
| * This allows firmware to avoid PCI reads/writes when updating |
| * and checking pointers. |
| * |
| * The firmware recognizes the use of SLIM memory by comparing |
| * the address of the get/put pointers structure with that of |
| * the SLIM BAR (BAR0). |
| * |
| * Caution: be sure to use the PCI config space value of BAR0/BAR1 |
| * (the hardware's view of the base address), not the OS's |
| * value of pci_resource_start() as the OS value may be a cookie |
| * for ioremap/iomap. |
| */ |
| |
| |
| pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_0, &bar_low); |
| pci_read_config_dword(phba->pcidev, PCI_BASE_ADDRESS_1, &bar_high); |
| |
| |
| /* mask off BAR0's flag bits 0 - 3 */ |
| phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + |
| (SLIMOFF*sizeof(uint32_t)); |
| if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) |
| phba->slim2p->pcb.hgpAddrHigh = bar_high; |
| else |
| phba->slim2p->pcb.hgpAddrHigh = 0; |
| /* write HGP data to SLIM at the required longword offset */ |
| memset(&hgp, 0, sizeof(struct lpfc_hgp)); |
| to_slim = phba->MBslimaddr + (SLIMOFF*sizeof (uint32_t)); |
| lpfc_memcpy_to_slim(to_slim, &hgp, sizeof(struct lpfc_hgp)); |
| |
| /* Setup Port Group ring pointer */ |
| offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port - |
| (uint8_t *)phba->slim2p; |
| pdma_addr = phba->slim2p_mapping + offset; |
| phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr); |
| phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr); |
| |
| /* Use callback routine to setp rings in the pcb */ |
| lpfc_config_pcb_setup(phba); |
| |
| /* special handling for LC HBAs */ |
| if (lpfc_is_LC_HBA(phba->pcidev->device)) { |
| uint32_t hbainit[5]; |
| |
| lpfc_hba_init(phba, hbainit); |
| |
| memcpy(&mb->un.varCfgPort.hbainit, hbainit, 20); |
| } |
| |
| /* Swap PCB if needed */ |
| lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb, |
| sizeof (PCB_t)); |
| |
| lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
| "%d:0405 Service Level Interface (SLI) 2 selected\n", |
| phba->brd_no); |
| } |
| |
| void |
| lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq) |
| { |
| struct lpfc_sli *psli; |
| |
| psli = &phba->sli; |
| |
| list_add_tail(&mbq->list, &psli->mboxq); |
| |
| psli->mboxq_cnt++; |
| |
| return; |
| } |
| |
| LPFC_MBOXQ_t * |
| lpfc_mbox_get(struct lpfc_hba * phba) |
| { |
| LPFC_MBOXQ_t *mbq = NULL; |
| struct lpfc_sli *psli = &phba->sli; |
| |
| list_remove_head((&psli->mboxq), mbq, LPFC_MBOXQ_t, |
| list); |
| if (mbq) { |
| psli->mboxq_cnt--; |
| } |
| |
| return mbq; |
| } |