| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2017, Microsoft Corporation. |
| * |
| * Author(s): Long Li <longli@microsoft.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/highmem.h> |
| #include "smbdirect.h" |
| #include "cifs_debug.h" |
| #include "cifsproto.h" |
| #include "smb2proto.h" |
| |
| static struct smbd_response *get_empty_queue_buffer( |
| struct smbd_connection *info); |
| static struct smbd_response *get_receive_buffer( |
| struct smbd_connection *info); |
| static void put_receive_buffer( |
| struct smbd_connection *info, |
| struct smbd_response *response); |
| static int allocate_receive_buffers(struct smbd_connection *info, int num_buf); |
| static void destroy_receive_buffers(struct smbd_connection *info); |
| |
| static void put_empty_packet( |
| struct smbd_connection *info, struct smbd_response *response); |
| static void enqueue_reassembly( |
| struct smbd_connection *info, |
| struct smbd_response *response, int data_length); |
| static struct smbd_response *_get_first_reassembly( |
| struct smbd_connection *info); |
| |
| static int smbd_post_recv( |
| struct smbd_connection *info, |
| struct smbd_response *response); |
| |
| static int smbd_post_send_empty(struct smbd_connection *info); |
| |
| static void destroy_mr_list(struct smbd_connection *info); |
| static int allocate_mr_list(struct smbd_connection *info); |
| |
| struct smb_extract_to_rdma { |
| struct ib_sge *sge; |
| unsigned int nr_sge; |
| unsigned int max_sge; |
| struct ib_device *device; |
| u32 local_dma_lkey; |
| enum dma_data_direction direction; |
| }; |
| static ssize_t smb_extract_iter_to_rdma(struct iov_iter *iter, size_t len, |
| struct smb_extract_to_rdma *rdma); |
| |
| /* SMBD version number */ |
| #define SMBD_V1 0x0100 |
| |
| /* Port numbers for SMBD transport */ |
| #define SMB_PORT 445 |
| #define SMBD_PORT 5445 |
| |
| /* Address lookup and resolve timeout in ms */ |
| #define RDMA_RESOLVE_TIMEOUT 5000 |
| |
| /* SMBD negotiation timeout in seconds */ |
| #define SMBD_NEGOTIATE_TIMEOUT 120 |
| |
| /* SMBD minimum receive size and fragmented sized defined in [MS-SMBD] */ |
| #define SMBD_MIN_RECEIVE_SIZE 128 |
| #define SMBD_MIN_FRAGMENTED_SIZE 131072 |
| |
| /* |
| * Default maximum number of RDMA read/write outstanding on this connection |
| * This value is possibly decreased during QP creation on hardware limit |
| */ |
| #define SMBD_CM_RESPONDER_RESOURCES 32 |
| |
| /* Maximum number of retries on data transfer operations */ |
| #define SMBD_CM_RETRY 6 |
| /* No need to retry on Receiver Not Ready since SMBD manages credits */ |
| #define SMBD_CM_RNR_RETRY 0 |
| |
| /* |
| * User configurable initial values per SMBD transport connection |
| * as defined in [MS-SMBD] 3.1.1.1 |
| * Those may change after a SMBD negotiation |
| */ |
| /* The local peer's maximum number of credits to grant to the peer */ |
| int smbd_receive_credit_max = 255; |
| |
| /* The remote peer's credit request of local peer */ |
| int smbd_send_credit_target = 255; |
| |
| /* The maximum single message size can be sent to remote peer */ |
| int smbd_max_send_size = 1364; |
| |
| /* The maximum fragmented upper-layer payload receive size supported */ |
| int smbd_max_fragmented_recv_size = 1024 * 1024; |
| |
| /* The maximum single-message size which can be received */ |
| int smbd_max_receive_size = 1364; |
| |
| /* The timeout to initiate send of a keepalive message on idle */ |
| int smbd_keep_alive_interval = 120; |
| |
| /* |
| * User configurable initial values for RDMA transport |
| * The actual values used may be lower and are limited to hardware capabilities |
| */ |
| /* Default maximum number of pages in a single RDMA write/read */ |
| int smbd_max_frmr_depth = 2048; |
| |
| /* If payload is less than this byte, use RDMA send/recv not read/write */ |
| int rdma_readwrite_threshold = 4096; |
| |
| /* Transport logging functions |
| * Logging are defined as classes. They can be OR'ed to define the actual |
| * logging level via module parameter smbd_logging_class |
| * e.g. cifs.smbd_logging_class=0xa0 will log all log_rdma_recv() and |
| * log_rdma_event() |
| */ |
| #define LOG_OUTGOING 0x1 |
| #define LOG_INCOMING 0x2 |
| #define LOG_READ 0x4 |
| #define LOG_WRITE 0x8 |
| #define LOG_RDMA_SEND 0x10 |
| #define LOG_RDMA_RECV 0x20 |
| #define LOG_KEEP_ALIVE 0x40 |
| #define LOG_RDMA_EVENT 0x80 |
| #define LOG_RDMA_MR 0x100 |
| static unsigned int smbd_logging_class; |
| module_param(smbd_logging_class, uint, 0644); |
| MODULE_PARM_DESC(smbd_logging_class, |
| "Logging class for SMBD transport 0x0 to 0x100"); |
| |
| #define ERR 0x0 |
| #define INFO 0x1 |
| static unsigned int smbd_logging_level = ERR; |
| module_param(smbd_logging_level, uint, 0644); |
| MODULE_PARM_DESC(smbd_logging_level, |
| "Logging level for SMBD transport, 0 (default): error, 1: info"); |
| |
| #define log_rdma(level, class, fmt, args...) \ |
| do { \ |
| if (level <= smbd_logging_level || class & smbd_logging_class) \ |
| cifs_dbg(VFS, "%s:%d " fmt, __func__, __LINE__, ##args);\ |
| } while (0) |
| |
| #define log_outgoing(level, fmt, args...) \ |
| log_rdma(level, LOG_OUTGOING, fmt, ##args) |
| #define log_incoming(level, fmt, args...) \ |
| log_rdma(level, LOG_INCOMING, fmt, ##args) |
| #define log_read(level, fmt, args...) log_rdma(level, LOG_READ, fmt, ##args) |
| #define log_write(level, fmt, args...) log_rdma(level, LOG_WRITE, fmt, ##args) |
| #define log_rdma_send(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_SEND, fmt, ##args) |
| #define log_rdma_recv(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_RECV, fmt, ##args) |
| #define log_keep_alive(level, fmt, args...) \ |
| log_rdma(level, LOG_KEEP_ALIVE, fmt, ##args) |
| #define log_rdma_event(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_EVENT, fmt, ##args) |
| #define log_rdma_mr(level, fmt, args...) \ |
| log_rdma(level, LOG_RDMA_MR, fmt, ##args) |
| |
| static void smbd_disconnect_rdma_work(struct work_struct *work) |
| { |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, disconnect_work); |
| |
| if (info->transport_status == SMBD_CONNECTED) { |
| info->transport_status = SMBD_DISCONNECTING; |
| rdma_disconnect(info->id); |
| } |
| } |
| |
| static void smbd_disconnect_rdma_connection(struct smbd_connection *info) |
| { |
| queue_work(info->workqueue, &info->disconnect_work); |
| } |
| |
| /* Upcall from RDMA CM */ |
| static int smbd_conn_upcall( |
| struct rdma_cm_id *id, struct rdma_cm_event *event) |
| { |
| struct smbd_connection *info = id->context; |
| |
| log_rdma_event(INFO, "event=%d status=%d\n", |
| event->event, event->status); |
| |
| switch (event->event) { |
| case RDMA_CM_EVENT_ADDR_RESOLVED: |
| case RDMA_CM_EVENT_ROUTE_RESOLVED: |
| info->ri_rc = 0; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ADDR_ERROR: |
| info->ri_rc = -EHOSTUNREACH; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ROUTE_ERROR: |
| info->ri_rc = -ENETUNREACH; |
| complete(&info->ri_done); |
| break; |
| |
| case RDMA_CM_EVENT_ESTABLISHED: |
| log_rdma_event(INFO, "connected event=%d\n", event->event); |
| info->transport_status = SMBD_CONNECTED; |
| wake_up_interruptible(&info->conn_wait); |
| break; |
| |
| case RDMA_CM_EVENT_CONNECT_ERROR: |
| case RDMA_CM_EVENT_UNREACHABLE: |
| case RDMA_CM_EVENT_REJECTED: |
| log_rdma_event(INFO, "connecting failed event=%d\n", event->event); |
| info->transport_status = SMBD_DISCONNECTED; |
| wake_up_interruptible(&info->conn_wait); |
| break; |
| |
| case RDMA_CM_EVENT_DEVICE_REMOVAL: |
| case RDMA_CM_EVENT_DISCONNECTED: |
| /* This happenes when we fail the negotiation */ |
| if (info->transport_status == SMBD_NEGOTIATE_FAILED) { |
| info->transport_status = SMBD_DISCONNECTED; |
| wake_up(&info->conn_wait); |
| break; |
| } |
| |
| info->transport_status = SMBD_DISCONNECTED; |
| wake_up_interruptible(&info->disconn_wait); |
| wake_up_interruptible(&info->wait_reassembly_queue); |
| wake_up_interruptible_all(&info->wait_send_queue); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* Upcall from RDMA QP */ |
| static void |
| smbd_qp_async_error_upcall(struct ib_event *event, void *context) |
| { |
| struct smbd_connection *info = context; |
| |
| log_rdma_event(ERR, "%s on device %s info %p\n", |
| ib_event_msg(event->event), event->device->name, info); |
| |
| switch (event->event) { |
| case IB_EVENT_CQ_ERR: |
| case IB_EVENT_QP_FATAL: |
| smbd_disconnect_rdma_connection(info); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static inline void *smbd_request_payload(struct smbd_request *request) |
| { |
| return (void *)request->packet; |
| } |
| |
| static inline void *smbd_response_payload(struct smbd_response *response) |
| { |
| return (void *)response->packet; |
| } |
| |
| /* Called when a RDMA send is done */ |
| static void send_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| int i; |
| struct smbd_request *request = |
| container_of(wc->wr_cqe, struct smbd_request, cqe); |
| |
| log_rdma_send(INFO, "smbd_request 0x%p completed wc->status=%d\n", |
| request, wc->status); |
| |
| if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_SEND) { |
| log_rdma_send(ERR, "wc->status=%d wc->opcode=%d\n", |
| wc->status, wc->opcode); |
| smbd_disconnect_rdma_connection(request->info); |
| } |
| |
| for (i = 0; i < request->num_sge; i++) |
| ib_dma_unmap_single(request->info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| |
| if (atomic_dec_and_test(&request->info->send_pending)) |
| wake_up(&request->info->wait_send_pending); |
| |
| wake_up(&request->info->wait_post_send); |
| |
| mempool_free(request, request->info->request_mempool); |
| } |
| |
| static void dump_smbd_negotiate_resp(struct smbd_negotiate_resp *resp) |
| { |
| log_rdma_event(INFO, "resp message min_version %u max_version %u negotiated_version %u credits_requested %u credits_granted %u status %u max_readwrite_size %u preferred_send_size %u max_receive_size %u max_fragmented_size %u\n", |
| resp->min_version, resp->max_version, |
| resp->negotiated_version, resp->credits_requested, |
| resp->credits_granted, resp->status, |
| resp->max_readwrite_size, resp->preferred_send_size, |
| resp->max_receive_size, resp->max_fragmented_size); |
| } |
| |
| /* |
| * Process a negotiation response message, according to [MS-SMBD]3.1.5.7 |
| * response, packet_length: the negotiation response message |
| * return value: true if negotiation is a success, false if failed |
| */ |
| static bool process_negotiation_response( |
| struct smbd_response *response, int packet_length) |
| { |
| struct smbd_connection *info = response->info; |
| struct smbd_negotiate_resp *packet = smbd_response_payload(response); |
| |
| if (packet_length < sizeof(struct smbd_negotiate_resp)) { |
| log_rdma_event(ERR, |
| "error: packet_length=%d\n", packet_length); |
| return false; |
| } |
| |
| if (le16_to_cpu(packet->negotiated_version) != SMBD_V1) { |
| log_rdma_event(ERR, "error: negotiated_version=%x\n", |
| le16_to_cpu(packet->negotiated_version)); |
| return false; |
| } |
| info->protocol = le16_to_cpu(packet->negotiated_version); |
| |
| if (packet->credits_requested == 0) { |
| log_rdma_event(ERR, "error: credits_requested==0\n"); |
| return false; |
| } |
| info->receive_credit_target = le16_to_cpu(packet->credits_requested); |
| |
| if (packet->credits_granted == 0) { |
| log_rdma_event(ERR, "error: credits_granted==0\n"); |
| return false; |
| } |
| atomic_set(&info->send_credits, le16_to_cpu(packet->credits_granted)); |
| |
| atomic_set(&info->receive_credits, 0); |
| |
| if (le32_to_cpu(packet->preferred_send_size) > info->max_receive_size) { |
| log_rdma_event(ERR, "error: preferred_send_size=%d\n", |
| le32_to_cpu(packet->preferred_send_size)); |
| return false; |
| } |
| info->max_receive_size = le32_to_cpu(packet->preferred_send_size); |
| |
| if (le32_to_cpu(packet->max_receive_size) < SMBD_MIN_RECEIVE_SIZE) { |
| log_rdma_event(ERR, "error: max_receive_size=%d\n", |
| le32_to_cpu(packet->max_receive_size)); |
| return false; |
| } |
| info->max_send_size = min_t(int, info->max_send_size, |
| le32_to_cpu(packet->max_receive_size)); |
| |
| if (le32_to_cpu(packet->max_fragmented_size) < |
| SMBD_MIN_FRAGMENTED_SIZE) { |
| log_rdma_event(ERR, "error: max_fragmented_size=%d\n", |
| le32_to_cpu(packet->max_fragmented_size)); |
| return false; |
| } |
| info->max_fragmented_send_size = |
| le32_to_cpu(packet->max_fragmented_size); |
| info->rdma_readwrite_threshold = |
| rdma_readwrite_threshold > info->max_fragmented_send_size ? |
| info->max_fragmented_send_size : |
| rdma_readwrite_threshold; |
| |
| |
| info->max_readwrite_size = min_t(u32, |
| le32_to_cpu(packet->max_readwrite_size), |
| info->max_frmr_depth * PAGE_SIZE); |
| info->max_frmr_depth = info->max_readwrite_size / PAGE_SIZE; |
| |
| return true; |
| } |
| |
| static void smbd_post_send_credits(struct work_struct *work) |
| { |
| int ret = 0; |
| int use_receive_queue = 1; |
| int rc; |
| struct smbd_response *response; |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, |
| post_send_credits_work); |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| wake_up(&info->wait_receive_queues); |
| return; |
| } |
| |
| if (info->receive_credit_target > |
| atomic_read(&info->receive_credits)) { |
| while (true) { |
| if (use_receive_queue) |
| response = get_receive_buffer(info); |
| else |
| response = get_empty_queue_buffer(info); |
| if (!response) { |
| /* now switch to empty packet queue */ |
| if (use_receive_queue) { |
| use_receive_queue = 0; |
| continue; |
| } else |
| break; |
| } |
| |
| response->type = SMBD_TRANSFER_DATA; |
| response->first_segment = false; |
| rc = smbd_post_recv(info, response); |
| if (rc) { |
| log_rdma_recv(ERR, |
| "post_recv failed rc=%d\n", rc); |
| put_receive_buffer(info, response); |
| break; |
| } |
| |
| ret++; |
| } |
| } |
| |
| spin_lock(&info->lock_new_credits_offered); |
| info->new_credits_offered += ret; |
| spin_unlock(&info->lock_new_credits_offered); |
| |
| /* Promptly send an immediate packet as defined in [MS-SMBD] 3.1.1.1 */ |
| info->send_immediate = true; |
| if (atomic_read(&info->receive_credits) < |
| info->receive_credit_target - 1) { |
| if (info->keep_alive_requested == KEEP_ALIVE_PENDING || |
| info->send_immediate) { |
| log_keep_alive(INFO, "send an empty message\n"); |
| smbd_post_send_empty(info); |
| } |
| } |
| } |
| |
| /* Called from softirq, when recv is done */ |
| static void recv_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| struct smbd_data_transfer *data_transfer; |
| struct smbd_response *response = |
| container_of(wc->wr_cqe, struct smbd_response, cqe); |
| struct smbd_connection *info = response->info; |
| int data_length = 0; |
| |
| log_rdma_recv(INFO, "response=0x%p type=%d wc status=%d wc opcode %d byte_len=%d pkey_index=%u\n", |
| response, response->type, wc->status, wc->opcode, |
| wc->byte_len, wc->pkey_index); |
| |
| if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_RECV) { |
| log_rdma_recv(INFO, "wc->status=%d opcode=%d\n", |
| wc->status, wc->opcode); |
| smbd_disconnect_rdma_connection(info); |
| goto error; |
| } |
| |
| ib_dma_sync_single_for_cpu( |
| wc->qp->device, |
| response->sge.addr, |
| response->sge.length, |
| DMA_FROM_DEVICE); |
| |
| switch (response->type) { |
| /* SMBD negotiation response */ |
| case SMBD_NEGOTIATE_RESP: |
| dump_smbd_negotiate_resp(smbd_response_payload(response)); |
| info->full_packet_received = true; |
| info->negotiate_done = |
| process_negotiation_response(response, wc->byte_len); |
| complete(&info->negotiate_completion); |
| break; |
| |
| /* SMBD data transfer packet */ |
| case SMBD_TRANSFER_DATA: |
| data_transfer = smbd_response_payload(response); |
| data_length = le32_to_cpu(data_transfer->data_length); |
| |
| /* |
| * If this is a packet with data playload place the data in |
| * reassembly queue and wake up the reading thread |
| */ |
| if (data_length) { |
| if (info->full_packet_received) |
| response->first_segment = true; |
| |
| if (le32_to_cpu(data_transfer->remaining_data_length)) |
| info->full_packet_received = false; |
| else |
| info->full_packet_received = true; |
| |
| enqueue_reassembly( |
| info, |
| response, |
| data_length); |
| } else |
| put_empty_packet(info, response); |
| |
| if (data_length) |
| wake_up_interruptible(&info->wait_reassembly_queue); |
| |
| atomic_dec(&info->receive_credits); |
| info->receive_credit_target = |
| le16_to_cpu(data_transfer->credits_requested); |
| if (le16_to_cpu(data_transfer->credits_granted)) { |
| atomic_add(le16_to_cpu(data_transfer->credits_granted), |
| &info->send_credits); |
| /* |
| * We have new send credits granted from remote peer |
| * If any sender is waiting for credits, unblock it |
| */ |
| wake_up_interruptible(&info->wait_send_queue); |
| } |
| |
| log_incoming(INFO, "data flags %d data_offset %d data_length %d remaining_data_length %d\n", |
| le16_to_cpu(data_transfer->flags), |
| le32_to_cpu(data_transfer->data_offset), |
| le32_to_cpu(data_transfer->data_length), |
| le32_to_cpu(data_transfer->remaining_data_length)); |
| |
| /* Send a KEEP_ALIVE response right away if requested */ |
| info->keep_alive_requested = KEEP_ALIVE_NONE; |
| if (le16_to_cpu(data_transfer->flags) & |
| SMB_DIRECT_RESPONSE_REQUESTED) { |
| info->keep_alive_requested = KEEP_ALIVE_PENDING; |
| } |
| |
| return; |
| |
| default: |
| log_rdma_recv(ERR, |
| "unexpected response type=%d\n", response->type); |
| } |
| |
| error: |
| put_receive_buffer(info, response); |
| } |
| |
| static struct rdma_cm_id *smbd_create_id( |
| struct smbd_connection *info, |
| struct sockaddr *dstaddr, int port) |
| { |
| struct rdma_cm_id *id; |
| int rc; |
| __be16 *sport; |
| |
| id = rdma_create_id(&init_net, smbd_conn_upcall, info, |
| RDMA_PS_TCP, IB_QPT_RC); |
| if (IS_ERR(id)) { |
| rc = PTR_ERR(id); |
| log_rdma_event(ERR, "rdma_create_id() failed %i\n", rc); |
| return id; |
| } |
| |
| if (dstaddr->sa_family == AF_INET6) |
| sport = &((struct sockaddr_in6 *)dstaddr)->sin6_port; |
| else |
| sport = &((struct sockaddr_in *)dstaddr)->sin_port; |
| |
| *sport = htons(port); |
| |
| init_completion(&info->ri_done); |
| info->ri_rc = -ETIMEDOUT; |
| |
| rc = rdma_resolve_addr(id, NULL, (struct sockaddr *)dstaddr, |
| RDMA_RESOLVE_TIMEOUT); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_addr() failed %i\n", rc); |
| goto out; |
| } |
| rc = wait_for_completion_interruptible_timeout( |
| &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT)); |
| /* e.g. if interrupted returns -ERESTARTSYS */ |
| if (rc < 0) { |
| log_rdma_event(ERR, "rdma_resolve_addr timeout rc: %i\n", rc); |
| goto out; |
| } |
| rc = info->ri_rc; |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_addr() completed %i\n", rc); |
| goto out; |
| } |
| |
| info->ri_rc = -ETIMEDOUT; |
| rc = rdma_resolve_route(id, RDMA_RESOLVE_TIMEOUT); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_route() failed %i\n", rc); |
| goto out; |
| } |
| rc = wait_for_completion_interruptible_timeout( |
| &info->ri_done, msecs_to_jiffies(RDMA_RESOLVE_TIMEOUT)); |
| /* e.g. if interrupted returns -ERESTARTSYS */ |
| if (rc < 0) { |
| log_rdma_event(ERR, "rdma_resolve_addr timeout rc: %i\n", rc); |
| goto out; |
| } |
| rc = info->ri_rc; |
| if (rc) { |
| log_rdma_event(ERR, "rdma_resolve_route() completed %i\n", rc); |
| goto out; |
| } |
| |
| return id; |
| |
| out: |
| rdma_destroy_id(id); |
| return ERR_PTR(rc); |
| } |
| |
| /* |
| * Test if FRWR (Fast Registration Work Requests) is supported on the device |
| * This implementation requires FRWR on RDMA read/write |
| * return value: true if it is supported |
| */ |
| static bool frwr_is_supported(struct ib_device_attr *attrs) |
| { |
| if (!(attrs->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS)) |
| return false; |
| if (attrs->max_fast_reg_page_list_len == 0) |
| return false; |
| return true; |
| } |
| |
| static int smbd_ia_open( |
| struct smbd_connection *info, |
| struct sockaddr *dstaddr, int port) |
| { |
| int rc; |
| |
| info->id = smbd_create_id(info, dstaddr, port); |
| if (IS_ERR(info->id)) { |
| rc = PTR_ERR(info->id); |
| goto out1; |
| } |
| |
| if (!frwr_is_supported(&info->id->device->attrs)) { |
| log_rdma_event(ERR, "Fast Registration Work Requests (FRWR) is not supported\n"); |
| log_rdma_event(ERR, "Device capability flags = %llx max_fast_reg_page_list_len = %u\n", |
| info->id->device->attrs.device_cap_flags, |
| info->id->device->attrs.max_fast_reg_page_list_len); |
| rc = -EPROTONOSUPPORT; |
| goto out2; |
| } |
| info->max_frmr_depth = min_t(int, |
| smbd_max_frmr_depth, |
| info->id->device->attrs.max_fast_reg_page_list_len); |
| info->mr_type = IB_MR_TYPE_MEM_REG; |
| if (info->id->device->attrs.kernel_cap_flags & IBK_SG_GAPS_REG) |
| info->mr_type = IB_MR_TYPE_SG_GAPS; |
| |
| info->pd = ib_alloc_pd(info->id->device, 0); |
| if (IS_ERR(info->pd)) { |
| rc = PTR_ERR(info->pd); |
| log_rdma_event(ERR, "ib_alloc_pd() returned %d\n", rc); |
| goto out2; |
| } |
| |
| return 0; |
| |
| out2: |
| rdma_destroy_id(info->id); |
| info->id = NULL; |
| |
| out1: |
| return rc; |
| } |
| |
| /* |
| * Send a negotiation request message to the peer |
| * The negotiation procedure is in [MS-SMBD] 3.1.5.2 and 3.1.5.3 |
| * After negotiation, the transport is connected and ready for |
| * carrying upper layer SMB payload |
| */ |
| static int smbd_post_send_negotiate_req(struct smbd_connection *info) |
| { |
| struct ib_send_wr send_wr; |
| int rc = -ENOMEM; |
| struct smbd_request *request; |
| struct smbd_negotiate_req *packet; |
| |
| request = mempool_alloc(info->request_mempool, GFP_KERNEL); |
| if (!request) |
| return rc; |
| |
| request->info = info; |
| |
| packet = smbd_request_payload(request); |
| packet->min_version = cpu_to_le16(SMBD_V1); |
| packet->max_version = cpu_to_le16(SMBD_V1); |
| packet->reserved = 0; |
| packet->credits_requested = cpu_to_le16(info->send_credit_target); |
| packet->preferred_send_size = cpu_to_le32(info->max_send_size); |
| packet->max_receive_size = cpu_to_le32(info->max_receive_size); |
| packet->max_fragmented_size = |
| cpu_to_le32(info->max_fragmented_recv_size); |
| |
| request->num_sge = 1; |
| request->sge[0].addr = ib_dma_map_single( |
| info->id->device, (void *)packet, |
| sizeof(*packet), DMA_TO_DEVICE); |
| if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) { |
| rc = -EIO; |
| goto dma_mapping_failed; |
| } |
| |
| request->sge[0].length = sizeof(*packet); |
| request->sge[0].lkey = info->pd->local_dma_lkey; |
| |
| ib_dma_sync_single_for_device( |
| info->id->device, request->sge[0].addr, |
| request->sge[0].length, DMA_TO_DEVICE); |
| |
| request->cqe.done = send_done; |
| |
| send_wr.next = NULL; |
| send_wr.wr_cqe = &request->cqe; |
| send_wr.sg_list = request->sge; |
| send_wr.num_sge = request->num_sge; |
| send_wr.opcode = IB_WR_SEND; |
| send_wr.send_flags = IB_SEND_SIGNALED; |
| |
| log_rdma_send(INFO, "sge addr=0x%llx length=%u lkey=0x%x\n", |
| request->sge[0].addr, |
| request->sge[0].length, request->sge[0].lkey); |
| |
| atomic_inc(&info->send_pending); |
| rc = ib_post_send(info->id->qp, &send_wr, NULL); |
| if (!rc) |
| return 0; |
| |
| /* if we reach here, post send failed */ |
| log_rdma_send(ERR, "ib_post_send failed rc=%d\n", rc); |
| atomic_dec(&info->send_pending); |
| ib_dma_unmap_single(info->id->device, request->sge[0].addr, |
| request->sge[0].length, DMA_TO_DEVICE); |
| |
| smbd_disconnect_rdma_connection(info); |
| |
| dma_mapping_failed: |
| mempool_free(request, info->request_mempool); |
| return rc; |
| } |
| |
| /* |
| * Extend the credits to remote peer |
| * This implements [MS-SMBD] 3.1.5.9 |
| * The idea is that we should extend credits to remote peer as quickly as |
| * it's allowed, to maintain data flow. We allocate as much receive |
| * buffer as possible, and extend the receive credits to remote peer |
| * return value: the new credtis being granted. |
| */ |
| static int manage_credits_prior_sending(struct smbd_connection *info) |
| { |
| int new_credits; |
| |
| spin_lock(&info->lock_new_credits_offered); |
| new_credits = info->new_credits_offered; |
| info->new_credits_offered = 0; |
| spin_unlock(&info->lock_new_credits_offered); |
| |
| return new_credits; |
| } |
| |
| /* |
| * Check if we need to send a KEEP_ALIVE message |
| * The idle connection timer triggers a KEEP_ALIVE message when expires |
| * SMB_DIRECT_RESPONSE_REQUESTED is set in the message flag to have peer send |
| * back a response. |
| * return value: |
| * 1 if SMB_DIRECT_RESPONSE_REQUESTED needs to be set |
| * 0: otherwise |
| */ |
| static int manage_keep_alive_before_sending(struct smbd_connection *info) |
| { |
| if (info->keep_alive_requested == KEEP_ALIVE_PENDING) { |
| info->keep_alive_requested = KEEP_ALIVE_SENT; |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* Post the send request */ |
| static int smbd_post_send(struct smbd_connection *info, |
| struct smbd_request *request) |
| { |
| struct ib_send_wr send_wr; |
| int rc, i; |
| |
| for (i = 0; i < request->num_sge; i++) { |
| log_rdma_send(INFO, |
| "rdma_request sge[%d] addr=0x%llx length=%u\n", |
| i, request->sge[i].addr, request->sge[i].length); |
| ib_dma_sync_single_for_device( |
| info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| } |
| |
| request->cqe.done = send_done; |
| |
| send_wr.next = NULL; |
| send_wr.wr_cqe = &request->cqe; |
| send_wr.sg_list = request->sge; |
| send_wr.num_sge = request->num_sge; |
| send_wr.opcode = IB_WR_SEND; |
| send_wr.send_flags = IB_SEND_SIGNALED; |
| |
| rc = ib_post_send(info->id->qp, &send_wr, NULL); |
| if (rc) { |
| log_rdma_send(ERR, "ib_post_send failed rc=%d\n", rc); |
| smbd_disconnect_rdma_connection(info); |
| rc = -EAGAIN; |
| } else |
| /* Reset timer for idle connection after packet is sent */ |
| mod_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| |
| return rc; |
| } |
| |
| static int smbd_post_send_iter(struct smbd_connection *info, |
| struct iov_iter *iter, |
| int *_remaining_data_length) |
| { |
| int i, rc; |
| int header_length; |
| int data_length; |
| struct smbd_request *request; |
| struct smbd_data_transfer *packet; |
| int new_credits = 0; |
| |
| wait_credit: |
| /* Wait for send credits. A SMBD packet needs one credit */ |
| rc = wait_event_interruptible(info->wait_send_queue, |
| atomic_read(&info->send_credits) > 0 || |
| info->transport_status != SMBD_CONNECTED); |
| if (rc) |
| goto err_wait_credit; |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_outgoing(ERR, "disconnected not sending on wait_credit\n"); |
| rc = -EAGAIN; |
| goto err_wait_credit; |
| } |
| if (unlikely(atomic_dec_return(&info->send_credits) < 0)) { |
| atomic_inc(&info->send_credits); |
| goto wait_credit; |
| } |
| |
| wait_send_queue: |
| wait_event(info->wait_post_send, |
| atomic_read(&info->send_pending) < info->send_credit_target || |
| info->transport_status != SMBD_CONNECTED); |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_outgoing(ERR, "disconnected not sending on wait_send_queue\n"); |
| rc = -EAGAIN; |
| goto err_wait_send_queue; |
| } |
| |
| if (unlikely(atomic_inc_return(&info->send_pending) > |
| info->send_credit_target)) { |
| atomic_dec(&info->send_pending); |
| goto wait_send_queue; |
| } |
| |
| request = mempool_alloc(info->request_mempool, GFP_KERNEL); |
| if (!request) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| request->info = info; |
| memset(request->sge, 0, sizeof(request->sge)); |
| |
| /* Fill in the data payload to find out how much data we can add */ |
| if (iter) { |
| struct smb_extract_to_rdma extract = { |
| .nr_sge = 1, |
| .max_sge = SMBDIRECT_MAX_SEND_SGE, |
| .sge = request->sge, |
| .device = info->id->device, |
| .local_dma_lkey = info->pd->local_dma_lkey, |
| .direction = DMA_TO_DEVICE, |
| }; |
| |
| rc = smb_extract_iter_to_rdma(iter, *_remaining_data_length, |
| &extract); |
| if (rc < 0) |
| goto err_dma; |
| data_length = rc; |
| request->num_sge = extract.nr_sge; |
| *_remaining_data_length -= data_length; |
| } else { |
| data_length = 0; |
| request->num_sge = 1; |
| } |
| |
| /* Fill in the packet header */ |
| packet = smbd_request_payload(request); |
| packet->credits_requested = cpu_to_le16(info->send_credit_target); |
| |
| new_credits = manage_credits_prior_sending(info); |
| atomic_add(new_credits, &info->receive_credits); |
| packet->credits_granted = cpu_to_le16(new_credits); |
| |
| info->send_immediate = false; |
| |
| packet->flags = 0; |
| if (manage_keep_alive_before_sending(info)) |
| packet->flags |= cpu_to_le16(SMB_DIRECT_RESPONSE_REQUESTED); |
| |
| packet->reserved = 0; |
| if (!data_length) |
| packet->data_offset = 0; |
| else |
| packet->data_offset = cpu_to_le32(24); |
| packet->data_length = cpu_to_le32(data_length); |
| packet->remaining_data_length = cpu_to_le32(*_remaining_data_length); |
| packet->padding = 0; |
| |
| log_outgoing(INFO, "credits_requested=%d credits_granted=%d data_offset=%d data_length=%d remaining_data_length=%d\n", |
| le16_to_cpu(packet->credits_requested), |
| le16_to_cpu(packet->credits_granted), |
| le32_to_cpu(packet->data_offset), |
| le32_to_cpu(packet->data_length), |
| le32_to_cpu(packet->remaining_data_length)); |
| |
| /* Map the packet to DMA */ |
| header_length = sizeof(struct smbd_data_transfer); |
| /* If this is a packet without payload, don't send padding */ |
| if (!data_length) |
| header_length = offsetof(struct smbd_data_transfer, padding); |
| |
| request->sge[0].addr = ib_dma_map_single(info->id->device, |
| (void *)packet, |
| header_length, |
| DMA_TO_DEVICE); |
| if (ib_dma_mapping_error(info->id->device, request->sge[0].addr)) { |
| rc = -EIO; |
| request->sge[0].addr = 0; |
| goto err_dma; |
| } |
| |
| request->sge[0].length = header_length; |
| request->sge[0].lkey = info->pd->local_dma_lkey; |
| |
| rc = smbd_post_send(info, request); |
| if (!rc) |
| return 0; |
| |
| err_dma: |
| for (i = 0; i < request->num_sge; i++) |
| if (request->sge[i].addr) |
| ib_dma_unmap_single(info->id->device, |
| request->sge[i].addr, |
| request->sge[i].length, |
| DMA_TO_DEVICE); |
| mempool_free(request, info->request_mempool); |
| |
| /* roll back receive credits and credits to be offered */ |
| spin_lock(&info->lock_new_credits_offered); |
| info->new_credits_offered += new_credits; |
| spin_unlock(&info->lock_new_credits_offered); |
| atomic_sub(new_credits, &info->receive_credits); |
| |
| err_alloc: |
| if (atomic_dec_and_test(&info->send_pending)) |
| wake_up(&info->wait_send_pending); |
| |
| err_wait_send_queue: |
| /* roll back send credits and pending */ |
| atomic_inc(&info->send_credits); |
| |
| err_wait_credit: |
| return rc; |
| } |
| |
| /* |
| * Send an empty message |
| * Empty message is used to extend credits to peer to for keep live |
| * while there is no upper layer payload to send at the time |
| */ |
| static int smbd_post_send_empty(struct smbd_connection *info) |
| { |
| int remaining_data_length = 0; |
| |
| info->count_send_empty++; |
| return smbd_post_send_iter(info, NULL, &remaining_data_length); |
| } |
| |
| /* |
| * Post a receive request to the transport |
| * The remote peer can only send data when a receive request is posted |
| * The interaction is controlled by send/receive credit system |
| */ |
| static int smbd_post_recv( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| struct ib_recv_wr recv_wr; |
| int rc = -EIO; |
| |
| response->sge.addr = ib_dma_map_single( |
| info->id->device, response->packet, |
| info->max_receive_size, DMA_FROM_DEVICE); |
| if (ib_dma_mapping_error(info->id->device, response->sge.addr)) |
| return rc; |
| |
| response->sge.length = info->max_receive_size; |
| response->sge.lkey = info->pd->local_dma_lkey; |
| |
| response->cqe.done = recv_done; |
| |
| recv_wr.wr_cqe = &response->cqe; |
| recv_wr.next = NULL; |
| recv_wr.sg_list = &response->sge; |
| recv_wr.num_sge = 1; |
| |
| rc = ib_post_recv(info->id->qp, &recv_wr, NULL); |
| if (rc) { |
| ib_dma_unmap_single(info->id->device, response->sge.addr, |
| response->sge.length, DMA_FROM_DEVICE); |
| smbd_disconnect_rdma_connection(info); |
| log_rdma_recv(ERR, "ib_post_recv failed rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| /* Perform SMBD negotiate according to [MS-SMBD] 3.1.5.2 */ |
| static int smbd_negotiate(struct smbd_connection *info) |
| { |
| int rc; |
| struct smbd_response *response = get_receive_buffer(info); |
| |
| response->type = SMBD_NEGOTIATE_RESP; |
| rc = smbd_post_recv(info, response); |
| log_rdma_event(INFO, "smbd_post_recv rc=%d iov.addr=0x%llx iov.length=%u iov.lkey=0x%x\n", |
| rc, response->sge.addr, |
| response->sge.length, response->sge.lkey); |
| if (rc) |
| return rc; |
| |
| init_completion(&info->negotiate_completion); |
| info->negotiate_done = false; |
| rc = smbd_post_send_negotiate_req(info); |
| if (rc) |
| return rc; |
| |
| rc = wait_for_completion_interruptible_timeout( |
| &info->negotiate_completion, SMBD_NEGOTIATE_TIMEOUT * HZ); |
| log_rdma_event(INFO, "wait_for_completion_timeout rc=%d\n", rc); |
| |
| if (info->negotiate_done) |
| return 0; |
| |
| if (rc == 0) |
| rc = -ETIMEDOUT; |
| else if (rc == -ERESTARTSYS) |
| rc = -EINTR; |
| else |
| rc = -ENOTCONN; |
| |
| return rc; |
| } |
| |
| static void put_empty_packet( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| spin_lock(&info->empty_packet_queue_lock); |
| list_add_tail(&response->list, &info->empty_packet_queue); |
| info->count_empty_packet_queue++; |
| spin_unlock(&info->empty_packet_queue_lock); |
| |
| queue_work(info->workqueue, &info->post_send_credits_work); |
| } |
| |
| /* |
| * Implement Connection.FragmentReassemblyBuffer defined in [MS-SMBD] 3.1.1.1 |
| * This is a queue for reassembling upper layer payload and present to upper |
| * layer. All the inncoming payload go to the reassembly queue, regardless of |
| * if reassembly is required. The uuper layer code reads from the queue for all |
| * incoming payloads. |
| * Put a received packet to the reassembly queue |
| * response: the packet received |
| * data_length: the size of payload in this packet |
| */ |
| static void enqueue_reassembly( |
| struct smbd_connection *info, |
| struct smbd_response *response, |
| int data_length) |
| { |
| spin_lock(&info->reassembly_queue_lock); |
| list_add_tail(&response->list, &info->reassembly_queue); |
| info->reassembly_queue_length++; |
| /* |
| * Make sure reassembly_data_length is updated after list and |
| * reassembly_queue_length are updated. On the dequeue side |
| * reassembly_data_length is checked without a lock to determine |
| * if reassembly_queue_length and list is up to date |
| */ |
| virt_wmb(); |
| info->reassembly_data_length += data_length; |
| spin_unlock(&info->reassembly_queue_lock); |
| info->count_reassembly_queue++; |
| info->count_enqueue_reassembly_queue++; |
| } |
| |
| /* |
| * Get the first entry at the front of reassembly queue |
| * Caller is responsible for locking |
| * return value: the first entry if any, NULL if queue is empty |
| */ |
| static struct smbd_response *_get_first_reassembly(struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| |
| if (!list_empty(&info->reassembly_queue)) { |
| ret = list_first_entry( |
| &info->reassembly_queue, |
| struct smbd_response, list); |
| } |
| return ret; |
| } |
| |
| static struct smbd_response *get_empty_queue_buffer( |
| struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&info->empty_packet_queue_lock, flags); |
| if (!list_empty(&info->empty_packet_queue)) { |
| ret = list_first_entry( |
| &info->empty_packet_queue, |
| struct smbd_response, list); |
| list_del(&ret->list); |
| info->count_empty_packet_queue--; |
| } |
| spin_unlock_irqrestore(&info->empty_packet_queue_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Get a receive buffer |
| * For each remote send, we need to post a receive. The receive buffers are |
| * pre-allocated in advance. |
| * return value: the receive buffer, NULL if none is available |
| */ |
| static struct smbd_response *get_receive_buffer(struct smbd_connection *info) |
| { |
| struct smbd_response *ret = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&info->receive_queue_lock, flags); |
| if (!list_empty(&info->receive_queue)) { |
| ret = list_first_entry( |
| &info->receive_queue, |
| struct smbd_response, list); |
| list_del(&ret->list); |
| info->count_receive_queue--; |
| info->count_get_receive_buffer++; |
| } |
| spin_unlock_irqrestore(&info->receive_queue_lock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * Return a receive buffer |
| * Upon returning of a receive buffer, we can post new receive and extend |
| * more receive credits to remote peer. This is done immediately after a |
| * receive buffer is returned. |
| */ |
| static void put_receive_buffer( |
| struct smbd_connection *info, struct smbd_response *response) |
| { |
| unsigned long flags; |
| |
| ib_dma_unmap_single(info->id->device, response->sge.addr, |
| response->sge.length, DMA_FROM_DEVICE); |
| |
| spin_lock_irqsave(&info->receive_queue_lock, flags); |
| list_add_tail(&response->list, &info->receive_queue); |
| info->count_receive_queue++; |
| info->count_put_receive_buffer++; |
| spin_unlock_irqrestore(&info->receive_queue_lock, flags); |
| |
| queue_work(info->workqueue, &info->post_send_credits_work); |
| } |
| |
| /* Preallocate all receive buffer on transport establishment */ |
| static int allocate_receive_buffers(struct smbd_connection *info, int num_buf) |
| { |
| int i; |
| struct smbd_response *response; |
| |
| INIT_LIST_HEAD(&info->reassembly_queue); |
| spin_lock_init(&info->reassembly_queue_lock); |
| info->reassembly_data_length = 0; |
| info->reassembly_queue_length = 0; |
| |
| INIT_LIST_HEAD(&info->receive_queue); |
| spin_lock_init(&info->receive_queue_lock); |
| info->count_receive_queue = 0; |
| |
| INIT_LIST_HEAD(&info->empty_packet_queue); |
| spin_lock_init(&info->empty_packet_queue_lock); |
| info->count_empty_packet_queue = 0; |
| |
| init_waitqueue_head(&info->wait_receive_queues); |
| |
| for (i = 0; i < num_buf; i++) { |
| response = mempool_alloc(info->response_mempool, GFP_KERNEL); |
| if (!response) |
| goto allocate_failed; |
| |
| response->info = info; |
| list_add_tail(&response->list, &info->receive_queue); |
| info->count_receive_queue++; |
| } |
| |
| return 0; |
| |
| allocate_failed: |
| while (!list_empty(&info->receive_queue)) { |
| response = list_first_entry( |
| &info->receive_queue, |
| struct smbd_response, list); |
| list_del(&response->list); |
| info->count_receive_queue--; |
| |
| mempool_free(response, info->response_mempool); |
| } |
| return -ENOMEM; |
| } |
| |
| static void destroy_receive_buffers(struct smbd_connection *info) |
| { |
| struct smbd_response *response; |
| |
| while ((response = get_receive_buffer(info))) |
| mempool_free(response, info->response_mempool); |
| |
| while ((response = get_empty_queue_buffer(info))) |
| mempool_free(response, info->response_mempool); |
| } |
| |
| /* Implement idle connection timer [MS-SMBD] 3.1.6.2 */ |
| static void idle_connection_timer(struct work_struct *work) |
| { |
| struct smbd_connection *info = container_of( |
| work, struct smbd_connection, |
| idle_timer_work.work); |
| |
| if (info->keep_alive_requested != KEEP_ALIVE_NONE) { |
| log_keep_alive(ERR, |
| "error status info->keep_alive_requested=%d\n", |
| info->keep_alive_requested); |
| smbd_disconnect_rdma_connection(info); |
| return; |
| } |
| |
| log_keep_alive(INFO, "about to send an empty idle message\n"); |
| smbd_post_send_empty(info); |
| |
| /* Setup the next idle timeout work */ |
| queue_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| } |
| |
| /* |
| * Destroy the transport and related RDMA and memory resources |
| * Need to go through all the pending counters and make sure on one is using |
| * the transport while it is destroyed |
| */ |
| void smbd_destroy(struct TCP_Server_Info *server) |
| { |
| struct smbd_connection *info = server->smbd_conn; |
| struct smbd_response *response; |
| unsigned long flags; |
| |
| if (!info) { |
| log_rdma_event(INFO, "rdma session already destroyed\n"); |
| return; |
| } |
| |
| log_rdma_event(INFO, "destroying rdma session\n"); |
| if (info->transport_status != SMBD_DISCONNECTED) { |
| rdma_disconnect(server->smbd_conn->id); |
| log_rdma_event(INFO, "wait for transport being disconnected\n"); |
| wait_event_interruptible( |
| info->disconn_wait, |
| info->transport_status == SMBD_DISCONNECTED); |
| } |
| |
| log_rdma_event(INFO, "destroying qp\n"); |
| ib_drain_qp(info->id->qp); |
| rdma_destroy_qp(info->id); |
| |
| log_rdma_event(INFO, "cancelling idle timer\n"); |
| cancel_delayed_work_sync(&info->idle_timer_work); |
| |
| log_rdma_event(INFO, "wait for all send posted to IB to finish\n"); |
| wait_event(info->wait_send_pending, |
| atomic_read(&info->send_pending) == 0); |
| |
| /* It's not possible for upper layer to get to reassembly */ |
| log_rdma_event(INFO, "drain the reassembly queue\n"); |
| do { |
| spin_lock_irqsave(&info->reassembly_queue_lock, flags); |
| response = _get_first_reassembly(info); |
| if (response) { |
| list_del(&response->list); |
| spin_unlock_irqrestore( |
| &info->reassembly_queue_lock, flags); |
| put_receive_buffer(info, response); |
| } else |
| spin_unlock_irqrestore( |
| &info->reassembly_queue_lock, flags); |
| } while (response); |
| info->reassembly_data_length = 0; |
| |
| log_rdma_event(INFO, "free receive buffers\n"); |
| wait_event(info->wait_receive_queues, |
| info->count_receive_queue + info->count_empty_packet_queue |
| == info->receive_credit_max); |
| destroy_receive_buffers(info); |
| |
| /* |
| * For performance reasons, memory registration and deregistration |
| * are not locked by srv_mutex. It is possible some processes are |
| * blocked on transport srv_mutex while holding memory registration. |
| * Release the transport srv_mutex to allow them to hit the failure |
| * path when sending data, and then release memory registartions. |
| */ |
| log_rdma_event(INFO, "freeing mr list\n"); |
| wake_up_interruptible_all(&info->wait_mr); |
| while (atomic_read(&info->mr_used_count)) { |
| cifs_server_unlock(server); |
| msleep(1000); |
| cifs_server_lock(server); |
| } |
| destroy_mr_list(info); |
| |
| ib_free_cq(info->send_cq); |
| ib_free_cq(info->recv_cq); |
| ib_dealloc_pd(info->pd); |
| rdma_destroy_id(info->id); |
| |
| /* free mempools */ |
| mempool_destroy(info->request_mempool); |
| kmem_cache_destroy(info->request_cache); |
| |
| mempool_destroy(info->response_mempool); |
| kmem_cache_destroy(info->response_cache); |
| |
| info->transport_status = SMBD_DESTROYED; |
| |
| destroy_workqueue(info->workqueue); |
| log_rdma_event(INFO, "rdma session destroyed\n"); |
| kfree(info); |
| server->smbd_conn = NULL; |
| } |
| |
| /* |
| * Reconnect this SMBD connection, called from upper layer |
| * return value: 0 on success, or actual error code |
| */ |
| int smbd_reconnect(struct TCP_Server_Info *server) |
| { |
| log_rdma_event(INFO, "reconnecting rdma session\n"); |
| |
| if (!server->smbd_conn) { |
| log_rdma_event(INFO, "rdma session already destroyed\n"); |
| goto create_conn; |
| } |
| |
| /* |
| * This is possible if transport is disconnected and we haven't received |
| * notification from RDMA, but upper layer has detected timeout |
| */ |
| if (server->smbd_conn->transport_status == SMBD_CONNECTED) { |
| log_rdma_event(INFO, "disconnecting transport\n"); |
| smbd_destroy(server); |
| } |
| |
| create_conn: |
| log_rdma_event(INFO, "creating rdma session\n"); |
| server->smbd_conn = smbd_get_connection( |
| server, (struct sockaddr *) &server->dstaddr); |
| |
| if (server->smbd_conn) { |
| cifs_dbg(VFS, "RDMA transport re-established\n"); |
| trace_smb3_smbd_connect_done(server->hostname, server->conn_id, &server->dstaddr); |
| return 0; |
| } |
| trace_smb3_smbd_connect_err(server->hostname, server->conn_id, &server->dstaddr); |
| return -ENOENT; |
| } |
| |
| static void destroy_caches_and_workqueue(struct smbd_connection *info) |
| { |
| destroy_receive_buffers(info); |
| destroy_workqueue(info->workqueue); |
| mempool_destroy(info->response_mempool); |
| kmem_cache_destroy(info->response_cache); |
| mempool_destroy(info->request_mempool); |
| kmem_cache_destroy(info->request_cache); |
| } |
| |
| #define MAX_NAME_LEN 80 |
| static int allocate_caches_and_workqueue(struct smbd_connection *info) |
| { |
| char name[MAX_NAME_LEN]; |
| int rc; |
| |
| scnprintf(name, MAX_NAME_LEN, "smbd_request_%p", info); |
| info->request_cache = |
| kmem_cache_create( |
| name, |
| sizeof(struct smbd_request) + |
| sizeof(struct smbd_data_transfer), |
| 0, SLAB_HWCACHE_ALIGN, NULL); |
| if (!info->request_cache) |
| return -ENOMEM; |
| |
| info->request_mempool = |
| mempool_create(info->send_credit_target, mempool_alloc_slab, |
| mempool_free_slab, info->request_cache); |
| if (!info->request_mempool) |
| goto out1; |
| |
| scnprintf(name, MAX_NAME_LEN, "smbd_response_%p", info); |
| info->response_cache = |
| kmem_cache_create( |
| name, |
| sizeof(struct smbd_response) + |
| info->max_receive_size, |
| 0, SLAB_HWCACHE_ALIGN, NULL); |
| if (!info->response_cache) |
| goto out2; |
| |
| info->response_mempool = |
| mempool_create(info->receive_credit_max, mempool_alloc_slab, |
| mempool_free_slab, info->response_cache); |
| if (!info->response_mempool) |
| goto out3; |
| |
| scnprintf(name, MAX_NAME_LEN, "smbd_%p", info); |
| info->workqueue = create_workqueue(name); |
| if (!info->workqueue) |
| goto out4; |
| |
| rc = allocate_receive_buffers(info, info->receive_credit_max); |
| if (rc) { |
| log_rdma_event(ERR, "failed to allocate receive buffers\n"); |
| goto out5; |
| } |
| |
| return 0; |
| |
| out5: |
| destroy_workqueue(info->workqueue); |
| out4: |
| mempool_destroy(info->response_mempool); |
| out3: |
| kmem_cache_destroy(info->response_cache); |
| out2: |
| mempool_destroy(info->request_mempool); |
| out1: |
| kmem_cache_destroy(info->request_cache); |
| return -ENOMEM; |
| } |
| |
| /* Create a SMBD connection, called by upper layer */ |
| static struct smbd_connection *_smbd_get_connection( |
| struct TCP_Server_Info *server, struct sockaddr *dstaddr, int port) |
| { |
| int rc; |
| struct smbd_connection *info; |
| struct rdma_conn_param conn_param; |
| struct ib_qp_init_attr qp_attr; |
| struct sockaddr_in *addr_in = (struct sockaddr_in *) dstaddr; |
| struct ib_port_immutable port_immutable; |
| u32 ird_ord_hdr[2]; |
| |
| info = kzalloc(sizeof(struct smbd_connection), GFP_KERNEL); |
| if (!info) |
| return NULL; |
| |
| info->transport_status = SMBD_CONNECTING; |
| rc = smbd_ia_open(info, dstaddr, port); |
| if (rc) { |
| log_rdma_event(INFO, "smbd_ia_open rc=%d\n", rc); |
| goto create_id_failed; |
| } |
| |
| if (smbd_send_credit_target > info->id->device->attrs.max_cqe || |
| smbd_send_credit_target > info->id->device->attrs.max_qp_wr) { |
| log_rdma_event(ERR, "consider lowering send_credit_target = %d. Possible CQE overrun, device reporting max_cqe %d max_qp_wr %d\n", |
| smbd_send_credit_target, |
| info->id->device->attrs.max_cqe, |
| info->id->device->attrs.max_qp_wr); |
| goto config_failed; |
| } |
| |
| if (smbd_receive_credit_max > info->id->device->attrs.max_cqe || |
| smbd_receive_credit_max > info->id->device->attrs.max_qp_wr) { |
| log_rdma_event(ERR, "consider lowering receive_credit_max = %d. Possible CQE overrun, device reporting max_cqe %d max_qp_wr %d\n", |
| smbd_receive_credit_max, |
| info->id->device->attrs.max_cqe, |
| info->id->device->attrs.max_qp_wr); |
| goto config_failed; |
| } |
| |
| info->receive_credit_max = smbd_receive_credit_max; |
| info->send_credit_target = smbd_send_credit_target; |
| info->max_send_size = smbd_max_send_size; |
| info->max_fragmented_recv_size = smbd_max_fragmented_recv_size; |
| info->max_receive_size = smbd_max_receive_size; |
| info->keep_alive_interval = smbd_keep_alive_interval; |
| |
| if (info->id->device->attrs.max_send_sge < SMBDIRECT_MAX_SEND_SGE || |
| info->id->device->attrs.max_recv_sge < SMBDIRECT_MAX_RECV_SGE) { |
| log_rdma_event(ERR, |
| "device %.*s max_send_sge/max_recv_sge = %d/%d too small\n", |
| IB_DEVICE_NAME_MAX, |
| info->id->device->name, |
| info->id->device->attrs.max_send_sge, |
| info->id->device->attrs.max_recv_sge); |
| goto config_failed; |
| } |
| |
| info->send_cq = NULL; |
| info->recv_cq = NULL; |
| info->send_cq = |
| ib_alloc_cq_any(info->id->device, info, |
| info->send_credit_target, IB_POLL_SOFTIRQ); |
| if (IS_ERR(info->send_cq)) { |
| info->send_cq = NULL; |
| goto alloc_cq_failed; |
| } |
| |
| info->recv_cq = |
| ib_alloc_cq_any(info->id->device, info, |
| info->receive_credit_max, IB_POLL_SOFTIRQ); |
| if (IS_ERR(info->recv_cq)) { |
| info->recv_cq = NULL; |
| goto alloc_cq_failed; |
| } |
| |
| memset(&qp_attr, 0, sizeof(qp_attr)); |
| qp_attr.event_handler = smbd_qp_async_error_upcall; |
| qp_attr.qp_context = info; |
| qp_attr.cap.max_send_wr = info->send_credit_target; |
| qp_attr.cap.max_recv_wr = info->receive_credit_max; |
| qp_attr.cap.max_send_sge = SMBDIRECT_MAX_SEND_SGE; |
| qp_attr.cap.max_recv_sge = SMBDIRECT_MAX_RECV_SGE; |
| qp_attr.cap.max_inline_data = 0; |
| qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR; |
| qp_attr.qp_type = IB_QPT_RC; |
| qp_attr.send_cq = info->send_cq; |
| qp_attr.recv_cq = info->recv_cq; |
| qp_attr.port_num = ~0; |
| |
| rc = rdma_create_qp(info->id, info->pd, &qp_attr); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_create_qp failed %i\n", rc); |
| goto create_qp_failed; |
| } |
| |
| memset(&conn_param, 0, sizeof(conn_param)); |
| conn_param.initiator_depth = 0; |
| |
| conn_param.responder_resources = |
| info->id->device->attrs.max_qp_rd_atom |
| < SMBD_CM_RESPONDER_RESOURCES ? |
| info->id->device->attrs.max_qp_rd_atom : |
| SMBD_CM_RESPONDER_RESOURCES; |
| info->responder_resources = conn_param.responder_resources; |
| log_rdma_mr(INFO, "responder_resources=%d\n", |
| info->responder_resources); |
| |
| /* Need to send IRD/ORD in private data for iWARP */ |
| info->id->device->ops.get_port_immutable( |
| info->id->device, info->id->port_num, &port_immutable); |
| if (port_immutable.core_cap_flags & RDMA_CORE_PORT_IWARP) { |
| ird_ord_hdr[0] = info->responder_resources; |
| ird_ord_hdr[1] = 1; |
| conn_param.private_data = ird_ord_hdr; |
| conn_param.private_data_len = sizeof(ird_ord_hdr); |
| } else { |
| conn_param.private_data = NULL; |
| conn_param.private_data_len = 0; |
| } |
| |
| conn_param.retry_count = SMBD_CM_RETRY; |
| conn_param.rnr_retry_count = SMBD_CM_RNR_RETRY; |
| conn_param.flow_control = 0; |
| |
| log_rdma_event(INFO, "connecting to IP %pI4 port %d\n", |
| &addr_in->sin_addr, port); |
| |
| init_waitqueue_head(&info->conn_wait); |
| init_waitqueue_head(&info->disconn_wait); |
| init_waitqueue_head(&info->wait_reassembly_queue); |
| rc = rdma_connect(info->id, &conn_param); |
| if (rc) { |
| log_rdma_event(ERR, "rdma_connect() failed with %i\n", rc); |
| goto rdma_connect_failed; |
| } |
| |
| wait_event_interruptible( |
| info->conn_wait, info->transport_status != SMBD_CONNECTING); |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_rdma_event(ERR, "rdma_connect failed port=%d\n", port); |
| goto rdma_connect_failed; |
| } |
| |
| log_rdma_event(INFO, "rdma_connect connected\n"); |
| |
| rc = allocate_caches_and_workqueue(info); |
| if (rc) { |
| log_rdma_event(ERR, "cache allocation failed\n"); |
| goto allocate_cache_failed; |
| } |
| |
| init_waitqueue_head(&info->wait_send_queue); |
| INIT_DELAYED_WORK(&info->idle_timer_work, idle_connection_timer); |
| queue_delayed_work(info->workqueue, &info->idle_timer_work, |
| info->keep_alive_interval*HZ); |
| |
| init_waitqueue_head(&info->wait_send_pending); |
| atomic_set(&info->send_pending, 0); |
| |
| init_waitqueue_head(&info->wait_post_send); |
| |
| INIT_WORK(&info->disconnect_work, smbd_disconnect_rdma_work); |
| INIT_WORK(&info->post_send_credits_work, smbd_post_send_credits); |
| info->new_credits_offered = 0; |
| spin_lock_init(&info->lock_new_credits_offered); |
| |
| rc = smbd_negotiate(info); |
| if (rc) { |
| log_rdma_event(ERR, "smbd_negotiate rc=%d\n", rc); |
| goto negotiation_failed; |
| } |
| |
| rc = allocate_mr_list(info); |
| if (rc) { |
| log_rdma_mr(ERR, "memory registration allocation failed\n"); |
| goto allocate_mr_failed; |
| } |
| |
| return info; |
| |
| allocate_mr_failed: |
| /* At this point, need to a full transport shutdown */ |
| server->smbd_conn = info; |
| smbd_destroy(server); |
| return NULL; |
| |
| negotiation_failed: |
| cancel_delayed_work_sync(&info->idle_timer_work); |
| destroy_caches_and_workqueue(info); |
| info->transport_status = SMBD_NEGOTIATE_FAILED; |
| init_waitqueue_head(&info->conn_wait); |
| rdma_disconnect(info->id); |
| wait_event(info->conn_wait, |
| info->transport_status == SMBD_DISCONNECTED); |
| |
| allocate_cache_failed: |
| rdma_connect_failed: |
| rdma_destroy_qp(info->id); |
| |
| create_qp_failed: |
| alloc_cq_failed: |
| if (info->send_cq) |
| ib_free_cq(info->send_cq); |
| if (info->recv_cq) |
| ib_free_cq(info->recv_cq); |
| |
| config_failed: |
| ib_dealloc_pd(info->pd); |
| rdma_destroy_id(info->id); |
| |
| create_id_failed: |
| kfree(info); |
| return NULL; |
| } |
| |
| struct smbd_connection *smbd_get_connection( |
| struct TCP_Server_Info *server, struct sockaddr *dstaddr) |
| { |
| struct smbd_connection *ret; |
| int port = SMBD_PORT; |
| |
| try_again: |
| ret = _smbd_get_connection(server, dstaddr, port); |
| |
| /* Try SMB_PORT if SMBD_PORT doesn't work */ |
| if (!ret && port == SMBD_PORT) { |
| port = SMB_PORT; |
| goto try_again; |
| } |
| return ret; |
| } |
| |
| /* |
| * Receive data from receive reassembly queue |
| * All the incoming data packets are placed in reassembly queue |
| * buf: the buffer to read data into |
| * size: the length of data to read |
| * return value: actual data read |
| * Note: this implementation copies the data from reassebmly queue to receive |
| * buffers used by upper layer. This is not the optimal code path. A better way |
| * to do it is to not have upper layer allocate its receive buffers but rather |
| * borrow the buffer from reassembly queue, and return it after data is |
| * consumed. But this will require more changes to upper layer code, and also |
| * need to consider packet boundaries while they still being reassembled. |
| */ |
| static int smbd_recv_buf(struct smbd_connection *info, char *buf, |
| unsigned int size) |
| { |
| struct smbd_response *response; |
| struct smbd_data_transfer *data_transfer; |
| int to_copy, to_read, data_read, offset; |
| u32 data_length, remaining_data_length, data_offset; |
| int rc; |
| |
| again: |
| /* |
| * No need to hold the reassembly queue lock all the time as we are |
| * the only one reading from the front of the queue. The transport |
| * may add more entries to the back of the queue at the same time |
| */ |
| log_read(INFO, "size=%d info->reassembly_data_length=%d\n", size, |
| info->reassembly_data_length); |
| if (info->reassembly_data_length >= size) { |
| int queue_length; |
| int queue_removed = 0; |
| |
| /* |
| * Need to make sure reassembly_data_length is read before |
| * reading reassembly_queue_length and calling |
| * _get_first_reassembly. This call is lock free |
| * as we never read at the end of the queue which are being |
| * updated in SOFTIRQ as more data is received |
| */ |
| virt_rmb(); |
| queue_length = info->reassembly_queue_length; |
| data_read = 0; |
| to_read = size; |
| offset = info->first_entry_offset; |
| while (data_read < size) { |
| response = _get_first_reassembly(info); |
| data_transfer = smbd_response_payload(response); |
| data_length = le32_to_cpu(data_transfer->data_length); |
| remaining_data_length = |
| le32_to_cpu( |
| data_transfer->remaining_data_length); |
| data_offset = le32_to_cpu(data_transfer->data_offset); |
| |
| /* |
| * The upper layer expects RFC1002 length at the |
| * beginning of the payload. Return it to indicate |
| * the total length of the packet. This minimize the |
| * change to upper layer packet processing logic. This |
| * will be eventually remove when an intermediate |
| * transport layer is added |
| */ |
| if (response->first_segment && size == 4) { |
| unsigned int rfc1002_len = |
| data_length + remaining_data_length; |
| *((__be32 *)buf) = cpu_to_be32(rfc1002_len); |
| data_read = 4; |
| response->first_segment = false; |
| log_read(INFO, "returning rfc1002 length %d\n", |
| rfc1002_len); |
| goto read_rfc1002_done; |
| } |
| |
| to_copy = min_t(int, data_length - offset, to_read); |
| memcpy( |
| buf + data_read, |
| (char *)data_transfer + data_offset + offset, |
| to_copy); |
| |
| /* move on to the next buffer? */ |
| if (to_copy == data_length - offset) { |
| queue_length--; |
| /* |
| * No need to lock if we are not at the |
| * end of the queue |
| */ |
| if (queue_length) |
| list_del(&response->list); |
| else { |
| spin_lock_irq( |
| &info->reassembly_queue_lock); |
| list_del(&response->list); |
| spin_unlock_irq( |
| &info->reassembly_queue_lock); |
| } |
| queue_removed++; |
| info->count_reassembly_queue--; |
| info->count_dequeue_reassembly_queue++; |
| put_receive_buffer(info, response); |
| offset = 0; |
| log_read(INFO, "put_receive_buffer offset=0\n"); |
| } else |
| offset += to_copy; |
| |
| to_read -= to_copy; |
| data_read += to_copy; |
| |
| log_read(INFO, "_get_first_reassembly memcpy %d bytes data_transfer_length-offset=%d after that to_read=%d data_read=%d offset=%d\n", |
| to_copy, data_length - offset, |
| to_read, data_read, offset); |
| } |
| |
| spin_lock_irq(&info->reassembly_queue_lock); |
| info->reassembly_data_length -= data_read; |
| info->reassembly_queue_length -= queue_removed; |
| spin_unlock_irq(&info->reassembly_queue_lock); |
| |
| info->first_entry_offset = offset; |
| log_read(INFO, "returning to thread data_read=%d reassembly_data_length=%d first_entry_offset=%d\n", |
| data_read, info->reassembly_data_length, |
| info->first_entry_offset); |
| read_rfc1002_done: |
| return data_read; |
| } |
| |
| log_read(INFO, "wait_event on more data\n"); |
| rc = wait_event_interruptible( |
| info->wait_reassembly_queue, |
| info->reassembly_data_length >= size || |
| info->transport_status != SMBD_CONNECTED); |
| /* Don't return any data if interrupted */ |
| if (rc) |
| return rc; |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_read(ERR, "disconnected\n"); |
| return -ECONNABORTED; |
| } |
| |
| goto again; |
| } |
| |
| /* |
| * Receive a page from receive reassembly queue |
| * page: the page to read data into |
| * to_read: the length of data to read |
| * return value: actual data read |
| */ |
| static int smbd_recv_page(struct smbd_connection *info, |
| struct page *page, unsigned int page_offset, |
| unsigned int to_read) |
| { |
| int ret; |
| char *to_address; |
| void *page_address; |
| |
| /* make sure we have the page ready for read */ |
| ret = wait_event_interruptible( |
| info->wait_reassembly_queue, |
| info->reassembly_data_length >= to_read || |
| info->transport_status != SMBD_CONNECTED); |
| if (ret) |
| return ret; |
| |
| /* now we can read from reassembly queue and not sleep */ |
| page_address = kmap_atomic(page); |
| to_address = (char *) page_address + page_offset; |
| |
| log_read(INFO, "reading from page=%p address=%p to_read=%d\n", |
| page, to_address, to_read); |
| |
| ret = smbd_recv_buf(info, to_address, to_read); |
| kunmap_atomic(page_address); |
| |
| return ret; |
| } |
| |
| /* |
| * Receive data from transport |
| * msg: a msghdr point to the buffer, can be ITER_KVEC or ITER_BVEC |
| * return: total bytes read, or 0. SMB Direct will not do partial read. |
| */ |
| int smbd_recv(struct smbd_connection *info, struct msghdr *msg) |
| { |
| char *buf; |
| struct page *page; |
| unsigned int to_read, page_offset; |
| int rc; |
| |
| if (iov_iter_rw(&msg->msg_iter) == WRITE) { |
| /* It's a bug in upper layer to get there */ |
| cifs_dbg(VFS, "Invalid msg iter dir %u\n", |
| iov_iter_rw(&msg->msg_iter)); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| switch (iov_iter_type(&msg->msg_iter)) { |
| case ITER_KVEC: |
| buf = msg->msg_iter.kvec->iov_base; |
| to_read = msg->msg_iter.kvec->iov_len; |
| rc = smbd_recv_buf(info, buf, to_read); |
| break; |
| |
| case ITER_BVEC: |
| page = msg->msg_iter.bvec->bv_page; |
| page_offset = msg->msg_iter.bvec->bv_offset; |
| to_read = msg->msg_iter.bvec->bv_len; |
| rc = smbd_recv_page(info, page, page_offset, to_read); |
| break; |
| |
| default: |
| /* It's a bug in upper layer to get there */ |
| cifs_dbg(VFS, "Invalid msg type %d\n", |
| iov_iter_type(&msg->msg_iter)); |
| rc = -EINVAL; |
| } |
| |
| out: |
| /* SMBDirect will read it all or nothing */ |
| if (rc > 0) |
| msg->msg_iter.count = 0; |
| return rc; |
| } |
| |
| /* |
| * Send data to transport |
| * Each rqst is transported as a SMBDirect payload |
| * rqst: the data to write |
| * return value: 0 if successfully write, otherwise error code |
| */ |
| int smbd_send(struct TCP_Server_Info *server, |
| int num_rqst, struct smb_rqst *rqst_array) |
| { |
| struct smbd_connection *info = server->smbd_conn; |
| struct smb_rqst *rqst; |
| struct iov_iter iter; |
| unsigned int remaining_data_length, klen; |
| int rc, i, rqst_idx; |
| |
| if (info->transport_status != SMBD_CONNECTED) |
| return -EAGAIN; |
| |
| /* |
| * Add in the page array if there is one. The caller needs to set |
| * rq_tailsz to PAGE_SIZE when the buffer has multiple pages and |
| * ends at page boundary |
| */ |
| remaining_data_length = 0; |
| for (i = 0; i < num_rqst; i++) |
| remaining_data_length += smb_rqst_len(server, &rqst_array[i]); |
| |
| if (unlikely(remaining_data_length > info->max_fragmented_send_size)) { |
| /* assertion: payload never exceeds negotiated maximum */ |
| log_write(ERR, "payload size %d > max size %d\n", |
| remaining_data_length, info->max_fragmented_send_size); |
| return -EINVAL; |
| } |
| |
| log_write(INFO, "num_rqst=%d total length=%u\n", |
| num_rqst, remaining_data_length); |
| |
| rqst_idx = 0; |
| do { |
| rqst = &rqst_array[rqst_idx]; |
| |
| cifs_dbg(FYI, "Sending smb (RDMA): idx=%d smb_len=%lu\n", |
| rqst_idx, smb_rqst_len(server, rqst)); |
| for (i = 0; i < rqst->rq_nvec; i++) |
| dump_smb(rqst->rq_iov[i].iov_base, rqst->rq_iov[i].iov_len); |
| |
| log_write(INFO, "RDMA-WR[%u] nvec=%d len=%u iter=%zu rqlen=%lu\n", |
| rqst_idx, rqst->rq_nvec, remaining_data_length, |
| iov_iter_count(&rqst->rq_iter), smb_rqst_len(server, rqst)); |
| |
| /* Send the metadata pages. */ |
| klen = 0; |
| for (i = 0; i < rqst->rq_nvec; i++) |
| klen += rqst->rq_iov[i].iov_len; |
| iov_iter_kvec(&iter, ITER_SOURCE, rqst->rq_iov, rqst->rq_nvec, klen); |
| |
| rc = smbd_post_send_iter(info, &iter, &remaining_data_length); |
| if (rc < 0) |
| break; |
| |
| if (iov_iter_count(&rqst->rq_iter) > 0) { |
| /* And then the data pages if there are any */ |
| rc = smbd_post_send_iter(info, &rqst->rq_iter, |
| &remaining_data_length); |
| if (rc < 0) |
| break; |
| } |
| |
| } while (++rqst_idx < num_rqst); |
| |
| /* |
| * As an optimization, we don't wait for individual I/O to finish |
| * before sending the next one. |
| * Send them all and wait for pending send count to get to 0 |
| * that means all the I/Os have been out and we are good to return |
| */ |
| |
| wait_event(info->wait_send_pending, |
| atomic_read(&info->send_pending) == 0); |
| |
| return rc; |
| } |
| |
| static void register_mr_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| struct smbd_mr *mr; |
| struct ib_cqe *cqe; |
| |
| if (wc->status) { |
| log_rdma_mr(ERR, "status=%d\n", wc->status); |
| cqe = wc->wr_cqe; |
| mr = container_of(cqe, struct smbd_mr, cqe); |
| smbd_disconnect_rdma_connection(mr->conn); |
| } |
| } |
| |
| /* |
| * The work queue function that recovers MRs |
| * We need to call ib_dereg_mr() and ib_alloc_mr() before this MR can be used |
| * again. Both calls are slow, so finish them in a workqueue. This will not |
| * block I/O path. |
| * There is one workqueue that recovers MRs, there is no need to lock as the |
| * I/O requests calling smbd_register_mr will never update the links in the |
| * mr_list. |
| */ |
| static void smbd_mr_recovery_work(struct work_struct *work) |
| { |
| struct smbd_connection *info = |
| container_of(work, struct smbd_connection, mr_recovery_work); |
| struct smbd_mr *smbdirect_mr; |
| int rc; |
| |
| list_for_each_entry(smbdirect_mr, &info->mr_list, list) { |
| if (smbdirect_mr->state == MR_ERROR) { |
| |
| /* recover this MR entry */ |
| rc = ib_dereg_mr(smbdirect_mr->mr); |
| if (rc) { |
| log_rdma_mr(ERR, |
| "ib_dereg_mr failed rc=%x\n", |
| rc); |
| smbd_disconnect_rdma_connection(info); |
| continue; |
| } |
| |
| smbdirect_mr->mr = ib_alloc_mr( |
| info->pd, info->mr_type, |
| info->max_frmr_depth); |
| if (IS_ERR(smbdirect_mr->mr)) { |
| log_rdma_mr(ERR, "ib_alloc_mr failed mr_type=%x max_frmr_depth=%x\n", |
| info->mr_type, |
| info->max_frmr_depth); |
| smbd_disconnect_rdma_connection(info); |
| continue; |
| } |
| } else |
| /* This MR is being used, don't recover it */ |
| continue; |
| |
| smbdirect_mr->state = MR_READY; |
| |
| /* smbdirect_mr->state is updated by this function |
| * and is read and updated by I/O issuing CPUs trying |
| * to get a MR, the call to atomic_inc_return |
| * implicates a memory barrier and guarantees this |
| * value is updated before waking up any calls to |
| * get_mr() from the I/O issuing CPUs |
| */ |
| if (atomic_inc_return(&info->mr_ready_count) == 1) |
| wake_up_interruptible(&info->wait_mr); |
| } |
| } |
| |
| static void destroy_mr_list(struct smbd_connection *info) |
| { |
| struct smbd_mr *mr, *tmp; |
| |
| cancel_work_sync(&info->mr_recovery_work); |
| list_for_each_entry_safe(mr, tmp, &info->mr_list, list) { |
| if (mr->state == MR_INVALIDATED) |
| ib_dma_unmap_sg(info->id->device, mr->sgt.sgl, |
| mr->sgt.nents, mr->dir); |
| ib_dereg_mr(mr->mr); |
| kfree(mr->sgt.sgl); |
| kfree(mr); |
| } |
| } |
| |
| /* |
| * Allocate MRs used for RDMA read/write |
| * The number of MRs will not exceed hardware capability in responder_resources |
| * All MRs are kept in mr_list. The MR can be recovered after it's used |
| * Recovery is done in smbd_mr_recovery_work. The content of list entry changes |
| * as MRs are used and recovered for I/O, but the list links will not change |
| */ |
| static int allocate_mr_list(struct smbd_connection *info) |
| { |
| int i; |
| struct smbd_mr *smbdirect_mr, *tmp; |
| |
| INIT_LIST_HEAD(&info->mr_list); |
| init_waitqueue_head(&info->wait_mr); |
| spin_lock_init(&info->mr_list_lock); |
| atomic_set(&info->mr_ready_count, 0); |
| atomic_set(&info->mr_used_count, 0); |
| init_waitqueue_head(&info->wait_for_mr_cleanup); |
| INIT_WORK(&info->mr_recovery_work, smbd_mr_recovery_work); |
| /* Allocate more MRs (2x) than hardware responder_resources */ |
| for (i = 0; i < info->responder_resources * 2; i++) { |
| smbdirect_mr = kzalloc(sizeof(*smbdirect_mr), GFP_KERNEL); |
| if (!smbdirect_mr) |
| goto cleanup_entries; |
| smbdirect_mr->mr = ib_alloc_mr(info->pd, info->mr_type, |
| info->max_frmr_depth); |
| if (IS_ERR(smbdirect_mr->mr)) { |
| log_rdma_mr(ERR, "ib_alloc_mr failed mr_type=%x max_frmr_depth=%x\n", |
| info->mr_type, info->max_frmr_depth); |
| goto out; |
| } |
| smbdirect_mr->sgt.sgl = kcalloc(info->max_frmr_depth, |
| sizeof(struct scatterlist), |
| GFP_KERNEL); |
| if (!smbdirect_mr->sgt.sgl) { |
| log_rdma_mr(ERR, "failed to allocate sgl\n"); |
| ib_dereg_mr(smbdirect_mr->mr); |
| goto out; |
| } |
| smbdirect_mr->state = MR_READY; |
| smbdirect_mr->conn = info; |
| |
| list_add_tail(&smbdirect_mr->list, &info->mr_list); |
| atomic_inc(&info->mr_ready_count); |
| } |
| return 0; |
| |
| out: |
| kfree(smbdirect_mr); |
| cleanup_entries: |
| list_for_each_entry_safe(smbdirect_mr, tmp, &info->mr_list, list) { |
| list_del(&smbdirect_mr->list); |
| ib_dereg_mr(smbdirect_mr->mr); |
| kfree(smbdirect_mr->sgt.sgl); |
| kfree(smbdirect_mr); |
| } |
| return -ENOMEM; |
| } |
| |
| /* |
| * Get a MR from mr_list. This function waits until there is at least one |
| * MR available in the list. It may access the list while the |
| * smbd_mr_recovery_work is recovering the MR list. This doesn't need a lock |
| * as they never modify the same places. However, there may be several CPUs |
| * issuing I/O trying to get MR at the same time, mr_list_lock is used to |
| * protect this situation. |
| */ |
| static struct smbd_mr *get_mr(struct smbd_connection *info) |
| { |
| struct smbd_mr *ret; |
| int rc; |
| again: |
| rc = wait_event_interruptible(info->wait_mr, |
| atomic_read(&info->mr_ready_count) || |
| info->transport_status != SMBD_CONNECTED); |
| if (rc) { |
| log_rdma_mr(ERR, "wait_event_interruptible rc=%x\n", rc); |
| return NULL; |
| } |
| |
| if (info->transport_status != SMBD_CONNECTED) { |
| log_rdma_mr(ERR, "info->transport_status=%x\n", |
| info->transport_status); |
| return NULL; |
| } |
| |
| spin_lock(&info->mr_list_lock); |
| list_for_each_entry(ret, &info->mr_list, list) { |
| if (ret->state == MR_READY) { |
| ret->state = MR_REGISTERED; |
| spin_unlock(&info->mr_list_lock); |
| atomic_dec(&info->mr_ready_count); |
| atomic_inc(&info->mr_used_count); |
| return ret; |
| } |
| } |
| |
| spin_unlock(&info->mr_list_lock); |
| /* |
| * It is possible that we could fail to get MR because other processes may |
| * try to acquire a MR at the same time. If this is the case, retry it. |
| */ |
| goto again; |
| } |
| |
| /* |
| * Transcribe the pages from an iterator into an MR scatterlist. |
| */ |
| static int smbd_iter_to_mr(struct smbd_connection *info, |
| struct iov_iter *iter, |
| struct sg_table *sgt, |
| unsigned int max_sg) |
| { |
| int ret; |
| |
| memset(sgt->sgl, 0, max_sg * sizeof(struct scatterlist)); |
| |
| ret = extract_iter_to_sg(iter, iov_iter_count(iter), sgt, max_sg, 0); |
| WARN_ON(ret < 0); |
| if (sgt->nents > 0) |
| sg_mark_end(&sgt->sgl[sgt->nents - 1]); |
| return ret; |
| } |
| |
| /* |
| * Register memory for RDMA read/write |
| * iter: the buffer to register memory with |
| * writing: true if this is a RDMA write (SMB read), false for RDMA read |
| * need_invalidate: true if this MR needs to be locally invalidated after I/O |
| * return value: the MR registered, NULL if failed. |
| */ |
| struct smbd_mr *smbd_register_mr(struct smbd_connection *info, |
| struct iov_iter *iter, |
| bool writing, bool need_invalidate) |
| { |
| struct smbd_mr *smbdirect_mr; |
| int rc, num_pages; |
| enum dma_data_direction dir; |
| struct ib_reg_wr *reg_wr; |
| |
| num_pages = iov_iter_npages(iter, info->max_frmr_depth + 1); |
| if (num_pages > info->max_frmr_depth) { |
| log_rdma_mr(ERR, "num_pages=%d max_frmr_depth=%d\n", |
| num_pages, info->max_frmr_depth); |
| WARN_ON_ONCE(1); |
| return NULL; |
| } |
| |
| smbdirect_mr = get_mr(info); |
| if (!smbdirect_mr) { |
| log_rdma_mr(ERR, "get_mr returning NULL\n"); |
| return NULL; |
| } |
| |
| dir = writing ? DMA_FROM_DEVICE : DMA_TO_DEVICE; |
| smbdirect_mr->dir = dir; |
| smbdirect_mr->need_invalidate = need_invalidate; |
| smbdirect_mr->sgt.nents = 0; |
| smbdirect_mr->sgt.orig_nents = 0; |
| |
| log_rdma_mr(INFO, "num_pages=0x%x count=0x%zx depth=%u\n", |
| num_pages, iov_iter_count(iter), info->max_frmr_depth); |
| smbd_iter_to_mr(info, iter, &smbdirect_mr->sgt, info->max_frmr_depth); |
| |
| rc = ib_dma_map_sg(info->id->device, smbdirect_mr->sgt.sgl, |
| smbdirect_mr->sgt.nents, dir); |
| if (!rc) { |
| log_rdma_mr(ERR, "ib_dma_map_sg num_pages=%x dir=%x rc=%x\n", |
| num_pages, dir, rc); |
| goto dma_map_error; |
| } |
| |
| rc = ib_map_mr_sg(smbdirect_mr->mr, smbdirect_mr->sgt.sgl, |
| smbdirect_mr->sgt.nents, NULL, PAGE_SIZE); |
| if (rc != smbdirect_mr->sgt.nents) { |
| log_rdma_mr(ERR, |
| "ib_map_mr_sg failed rc = %d nents = %x\n", |
| rc, smbdirect_mr->sgt.nents); |
| goto map_mr_error; |
| } |
| |
| ib_update_fast_reg_key(smbdirect_mr->mr, |
| ib_inc_rkey(smbdirect_mr->mr->rkey)); |
| reg_wr = &smbdirect_mr->wr; |
| reg_wr->wr.opcode = IB_WR_REG_MR; |
| smbdirect_mr->cqe.done = register_mr_done; |
| reg_wr->wr.wr_cqe = &smbdirect_mr->cqe; |
| reg_wr->wr.num_sge = 0; |
| reg_wr->wr.send_flags = IB_SEND_SIGNALED; |
| reg_wr->mr = smbdirect_mr->mr; |
| reg_wr->key = smbdirect_mr->mr->rkey; |
| reg_wr->access = writing ? |
| IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE : |
| IB_ACCESS_REMOTE_READ; |
| |
| /* |
| * There is no need for waiting for complemtion on ib_post_send |
| * on IB_WR_REG_MR. Hardware enforces a barrier and order of execution |
| * on the next ib_post_send when we actually send I/O to remote peer |
| */ |
| rc = ib_post_send(info->id->qp, ®_wr->wr, NULL); |
| if (!rc) |
| return smbdirect_mr; |
| |
| log_rdma_mr(ERR, "ib_post_send failed rc=%x reg_wr->key=%x\n", |
| rc, reg_wr->key); |
| |
| /* If all failed, attempt to recover this MR by setting it MR_ERROR*/ |
| map_mr_error: |
| ib_dma_unmap_sg(info->id->device, smbdirect_mr->sgt.sgl, |
| smbdirect_mr->sgt.nents, smbdirect_mr->dir); |
| |
| dma_map_error: |
| smbdirect_mr->state = MR_ERROR; |
| if (atomic_dec_and_test(&info->mr_used_count)) |
| wake_up(&info->wait_for_mr_cleanup); |
| |
| smbd_disconnect_rdma_connection(info); |
| |
| return NULL; |
| } |
| |
| static void local_inv_done(struct ib_cq *cq, struct ib_wc *wc) |
| { |
| struct smbd_mr *smbdirect_mr; |
| struct ib_cqe *cqe; |
| |
| cqe = wc->wr_cqe; |
| smbdirect_mr = container_of(cqe, struct smbd_mr, cqe); |
| smbdirect_mr->state = MR_INVALIDATED; |
| if (wc->status != IB_WC_SUCCESS) { |
| log_rdma_mr(ERR, "invalidate failed status=%x\n", wc->status); |
| smbdirect_mr->state = MR_ERROR; |
| } |
| complete(&smbdirect_mr->invalidate_done); |
| } |
| |
| /* |
| * Deregister a MR after I/O is done |
| * This function may wait if remote invalidation is not used |
| * and we have to locally invalidate the buffer to prevent data is being |
| * modified by remote peer after upper layer consumes it |
| */ |
| int smbd_deregister_mr(struct smbd_mr *smbdirect_mr) |
| { |
| struct ib_send_wr *wr; |
| struct smbd_connection *info = smbdirect_mr->conn; |
| int rc = 0; |
| |
| if (smbdirect_mr->need_invalidate) { |
| /* Need to finish local invalidation before returning */ |
| wr = &smbdirect_mr->inv_wr; |
| wr->opcode = IB_WR_LOCAL_INV; |
| smbdirect_mr->cqe.done = local_inv_done; |
| wr->wr_cqe = &smbdirect_mr->cqe; |
| wr->num_sge = 0; |
| wr->ex.invalidate_rkey = smbdirect_mr->mr->rkey; |
| wr->send_flags = IB_SEND_SIGNALED; |
| |
| init_completion(&smbdirect_mr->invalidate_done); |
| rc = ib_post_send(info->id->qp, wr, NULL); |
| if (rc) { |
| log_rdma_mr(ERR, "ib_post_send failed rc=%x\n", rc); |
| smbd_disconnect_rdma_connection(info); |
| goto done; |
| } |
| wait_for_completion(&smbdirect_mr->invalidate_done); |
| smbdirect_mr->need_invalidate = false; |
| } else |
| /* |
| * For remote invalidation, just set it to MR_INVALIDATED |
| * and defer to mr_recovery_work to recover the MR for next use |
| */ |
| smbdirect_mr->state = MR_INVALIDATED; |
| |
| if (smbdirect_mr->state == MR_INVALIDATED) { |
| ib_dma_unmap_sg( |
| info->id->device, smbdirect_mr->sgt.sgl, |
| smbdirect_mr->sgt.nents, |
| smbdirect_mr->dir); |
| smbdirect_mr->state = MR_READY; |
| if (atomic_inc_return(&info->mr_ready_count) == 1) |
| wake_up_interruptible(&info->wait_mr); |
| } else |
| /* |
| * Schedule the work to do MR recovery for future I/Os MR |
| * recovery is slow and don't want it to block current I/O |
| */ |
| queue_work(info->workqueue, &info->mr_recovery_work); |
| |
| done: |
| if (atomic_dec_and_test(&info->mr_used_count)) |
| wake_up(&info->wait_for_mr_cleanup); |
| |
| return rc; |
| } |
| |
| static bool smb_set_sge(struct smb_extract_to_rdma *rdma, |
| struct page *lowest_page, size_t off, size_t len) |
| { |
| struct ib_sge *sge = &rdma->sge[rdma->nr_sge]; |
| u64 addr; |
| |
| addr = ib_dma_map_page(rdma->device, lowest_page, |
| off, len, rdma->direction); |
| if (ib_dma_mapping_error(rdma->device, addr)) |
| return false; |
| |
| sge->addr = addr; |
| sge->length = len; |
| sge->lkey = rdma->local_dma_lkey; |
| rdma->nr_sge++; |
| return true; |
| } |
| |
| /* |
| * Extract page fragments from a BVEC-class iterator and add them to an RDMA |
| * element list. The pages are not pinned. |
| */ |
| static ssize_t smb_extract_bvec_to_rdma(struct iov_iter *iter, |
| struct smb_extract_to_rdma *rdma, |
| ssize_t maxsize) |
| { |
| const struct bio_vec *bv = iter->bvec; |
| unsigned long start = iter->iov_offset; |
| unsigned int i; |
| ssize_t ret = 0; |
| |
| for (i = 0; i < iter->nr_segs; i++) { |
| size_t off, len; |
| |
| len = bv[i].bv_len; |
| if (start >= len) { |
| start -= len; |
| continue; |
| } |
| |
| len = min_t(size_t, maxsize, len - start); |
| off = bv[i].bv_offset + start; |
| |
| if (!smb_set_sge(rdma, bv[i].bv_page, off, len)) |
| return -EIO; |
| |
| ret += len; |
| maxsize -= len; |
| if (rdma->nr_sge >= rdma->max_sge || maxsize <= 0) |
| break; |
| start = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Extract fragments from a KVEC-class iterator and add them to an RDMA list. |
| * This can deal with vmalloc'd buffers as well as kmalloc'd or static buffers. |
| * The pages are not pinned. |
| */ |
| static ssize_t smb_extract_kvec_to_rdma(struct iov_iter *iter, |
| struct smb_extract_to_rdma *rdma, |
| ssize_t maxsize) |
| { |
| const struct kvec *kv = iter->kvec; |
| unsigned long start = iter->iov_offset; |
| unsigned int i; |
| ssize_t ret = 0; |
| |
| for (i = 0; i < iter->nr_segs; i++) { |
| struct page *page; |
| unsigned long kaddr; |
| size_t off, len, seg; |
| |
| len = kv[i].iov_len; |
| if (start >= len) { |
| start -= len; |
| continue; |
| } |
| |
| kaddr = (unsigned long)kv[i].iov_base + start; |
| off = kaddr & ~PAGE_MASK; |
| len = min_t(size_t, maxsize, len - start); |
| kaddr &= PAGE_MASK; |
| |
| maxsize -= len; |
| do { |
| seg = min_t(size_t, len, PAGE_SIZE - off); |
| |
| if (is_vmalloc_or_module_addr((void *)kaddr)) |
| page = vmalloc_to_page((void *)kaddr); |
| else |
| page = virt_to_page((void *)kaddr); |
| |
| if (!smb_set_sge(rdma, page, off, seg)) |
| return -EIO; |
| |
| ret += seg; |
| len -= seg; |
| kaddr += PAGE_SIZE; |
| off = 0; |
| } while (len > 0 && rdma->nr_sge < rdma->max_sge); |
| |
| if (rdma->nr_sge >= rdma->max_sge || maxsize <= 0) |
| break; |
| start = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Extract folio fragments from an XARRAY-class iterator and add them to an |
| * RDMA list. The folios are not pinned. |
| */ |
| static ssize_t smb_extract_xarray_to_rdma(struct iov_iter *iter, |
| struct smb_extract_to_rdma *rdma, |
| ssize_t maxsize) |
| { |
| struct xarray *xa = iter->xarray; |
| struct folio *folio; |
| loff_t start = iter->xarray_start + iter->iov_offset; |
| pgoff_t index = start / PAGE_SIZE; |
| ssize_t ret = 0; |
| size_t off, len; |
| XA_STATE(xas, xa, index); |
| |
| rcu_read_lock(); |
| |
| xas_for_each(&xas, folio, ULONG_MAX) { |
| if (xas_retry(&xas, folio)) |
| continue; |
| if (WARN_ON(xa_is_value(folio))) |
| break; |
| if (WARN_ON(folio_test_hugetlb(folio))) |
| break; |
| |
| off = offset_in_folio(folio, start); |
| len = min_t(size_t, maxsize, folio_size(folio) - off); |
| |
| if (!smb_set_sge(rdma, folio_page(folio, 0), off, len)) { |
| rcu_read_unlock(); |
| return -EIO; |
| } |
| |
| maxsize -= len; |
| ret += len; |
| if (rdma->nr_sge >= rdma->max_sge || maxsize <= 0) |
| break; |
| } |
| |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /* |
| * Extract page fragments from up to the given amount of the source iterator |
| * and build up an RDMA list that refers to all of those bits. The RDMA list |
| * is appended to, up to the maximum number of elements set in the parameter |
| * block. |
| * |
| * The extracted page fragments are not pinned or ref'd in any way; if an |
| * IOVEC/UBUF-type iterator is to be used, it should be converted to a |
| * BVEC-type iterator and the pages pinned, ref'd or otherwise held in some |
| * way. |
| */ |
| static ssize_t smb_extract_iter_to_rdma(struct iov_iter *iter, size_t len, |
| struct smb_extract_to_rdma *rdma) |
| { |
| ssize_t ret; |
| int before = rdma->nr_sge; |
| |
| switch (iov_iter_type(iter)) { |
| case ITER_BVEC: |
| ret = smb_extract_bvec_to_rdma(iter, rdma, len); |
| break; |
| case ITER_KVEC: |
| ret = smb_extract_kvec_to_rdma(iter, rdma, len); |
| break; |
| case ITER_XARRAY: |
| ret = smb_extract_xarray_to_rdma(iter, rdma, len); |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| return -EIO; |
| } |
| |
| if (ret > 0) { |
| iov_iter_advance(iter, ret); |
| } else if (ret < 0) { |
| while (rdma->nr_sge > before) { |
| struct ib_sge *sge = &rdma->sge[rdma->nr_sge--]; |
| |
| ib_dma_unmap_single(rdma->device, sge->addr, sge->length, |
| rdma->direction); |
| sge->addr = 0; |
| } |
| } |
| |
| return ret; |
| } |