blob: a1c293f42a1fb131d06d6cfd51fe91e229325e2e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* IO workarounds for PCI on Celleb/Cell platform
*
* (C) Copyright 2006-2007 TOSHIBA CORPORATION
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <asm/ppc-pci.h>
#include <asm/pci-bridge.h>
#include <asm/io-workarounds.h>
#define SPIDER_PCI_DISABLE_PREFETCH
struct spiderpci_iowa_private {
void __iomem *regs;
};
static void spiderpci_io_flush(struct iowa_bus *bus)
{
struct spiderpci_iowa_private *priv;
priv = bus->private;
in_be32(priv->regs + SPIDER_PCI_DUMMY_READ);
iosync();
}
#define SPIDER_PCI_MMIO_READ(name, ret) \
static ret spiderpci_##name(const PCI_IO_ADDR addr) \
{ \
ret val = __do_##name(addr); \
spiderpci_io_flush(iowa_mem_find_bus(addr)); \
return val; \
}
#define SPIDER_PCI_MMIO_READ_STR(name) \
static void spiderpci_##name(const PCI_IO_ADDR addr, void *buf, \
unsigned long count) \
{ \
__do_##name(addr, buf, count); \
spiderpci_io_flush(iowa_mem_find_bus(addr)); \
}
SPIDER_PCI_MMIO_READ(readb, u8)
SPIDER_PCI_MMIO_READ(readw, u16)
SPIDER_PCI_MMIO_READ(readl, u32)
SPIDER_PCI_MMIO_READ(readq, u64)
SPIDER_PCI_MMIO_READ(readw_be, u16)
SPIDER_PCI_MMIO_READ(readl_be, u32)
SPIDER_PCI_MMIO_READ(readq_be, u64)
SPIDER_PCI_MMIO_READ_STR(readsb)
SPIDER_PCI_MMIO_READ_STR(readsw)
SPIDER_PCI_MMIO_READ_STR(readsl)
static void spiderpci_memcpy_fromio(void *dest, const PCI_IO_ADDR src,
unsigned long n)
{
__do_memcpy_fromio(dest, src, n);
spiderpci_io_flush(iowa_mem_find_bus(src));
}
static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
void __iomem *regs)
{
void *dummy_page_va;
dma_addr_t dummy_page_da;
#ifdef SPIDER_PCI_DISABLE_PREFETCH
u32 val = in_be32(regs + SPIDER_PCI_VCI_CNTL_STAT);
pr_debug("SPIDER_IOWA:PVCI_Control_Status was 0x%08x\n", val);
out_be32(regs + SPIDER_PCI_VCI_CNTL_STAT, val | 0x8);
#endif /* SPIDER_PCI_DISABLE_PREFETCH */
/* setup dummy read */
/*
* On CellBlade, we can't know that which XDR memory is used by
* kmalloc() to allocate dummy_page_va.
* In order to imporve the performance, the XDR which is used to
* allocate dummy_page_va is the nearest the spider-pci.
* We have to select the CBE which is the nearest the spider-pci
* to allocate memory from the best XDR, but I don't know that
* how to do.
*
* Celleb does not have this problem, because it has only one XDR.
*/
dummy_page_va = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!dummy_page_va) {
pr_err("SPIDERPCI-IOWA:Alloc dummy_page_va failed.\n");
return -1;
}
dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
PAGE_SIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(phb->parent, dummy_page_da)) {
pr_err("SPIDER-IOWA:Map dummy page filed.\n");
kfree(dummy_page_va);
return -1;
}
out_be32(regs + SPIDER_PCI_DUMMY_READ_BASE, dummy_page_da);
return 0;
}
int __init spiderpci_iowa_init(struct iowa_bus *bus, void *data)
{
void __iomem *regs = NULL;
struct spiderpci_iowa_private *priv;
struct device_node *np = bus->phb->dn;
struct resource r;
unsigned long offset = (unsigned long)data;
pr_debug("SPIDERPCI-IOWA:Bus initialize for spider(%pOF)\n",
np);
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
pr_err("SPIDERPCI-IOWA:"
"Can't allocate struct spiderpci_iowa_private");
return -1;
}
if (of_address_to_resource(np, 0, &r)) {
pr_err("SPIDERPCI-IOWA:Can't get resource.\n");
goto error;
}
regs = ioremap(r.start + offset, SPIDER_PCI_REG_SIZE);
if (!regs) {
pr_err("SPIDERPCI-IOWA:ioremap failed.\n");
goto error;
}
priv->regs = regs;
bus->private = priv;
if (spiderpci_pci_setup_chip(bus->phb, regs))
goto error;
return 0;
error:
kfree(priv);
bus->private = NULL;
if (regs)
iounmap(regs);
return -1;
}
struct ppc_pci_io spiderpci_ops = {
.readb = spiderpci_readb,
.readw = spiderpci_readw,
.readl = spiderpci_readl,
.readq = spiderpci_readq,
.readw_be = spiderpci_readw_be,
.readl_be = spiderpci_readl_be,
.readq_be = spiderpci_readq_be,
.readsb = spiderpci_readsb,
.readsw = spiderpci_readsw,
.readsl = spiderpci_readsl,
.memcpy_fromio = spiderpci_memcpy_fromio,
};