| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Intel USBIO Bridge driver | |
| * | |
| * Copyright (c) 2025 Intel Corporation. | |
| * Copyright (c) 2025 Red Hat, Inc. | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/byteorder/generic.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/completion.h> | |
| #include <linux/dev_printk.h> | |
| #include <linux/device.h> | |
| #include <linux/lockdep.h> | |
| #include <linux/mutex.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/usbio.h> | |
| /************************************* | |
| * USBIO Bridge Protocol Definitions * | |
| *************************************/ | |
| /* USBIO Control Commands */ | |
| #define USBIO_CTRLCMD_PROTVER 0 | |
| #define USBIO_CTRLCMD_FWVER 1 | |
| #define USBIO_CTRLCMD_HS 2 | |
| #define USBIO_CTRLCMD_ENUMGPIO 16 | |
| #define USBIO_CTRLCMD_ENUMI2C 17 | |
| /* USBIO Packet Flags */ | |
| #define USBIO_PKTFLAG_ACK BIT(0) | |
| #define USBIO_PKTFLAG_RSP BIT(1) | |
| #define USBIO_PKTFLAG_CMP BIT(2) | |
| #define USBIO_PKTFLAG_ERR BIT(3) | |
| #define USBIO_PKTFLAGS_REQRESP (USBIO_PKTFLAG_CMP | USBIO_PKTFLAG_ACK) | |
| #define USBIO_CTRLXFER_TIMEOUT 0 | |
| #define USBIO_BULKXFER_TIMEOUT 100 | |
| struct usbio_protver { | |
| u8 ver; | |
| } __packed; | |
| struct usbio_fwver { | |
| u8 major; | |
| u8 minor; | |
| __le16 patch; | |
| __le16 build; | |
| } __packed; | |
| /*********************************** | |
| * USBIO Bridge Device Definitions * | |
| ***********************************/ | |
| /** | |
| * struct usbio_device - the usb device exposing IOs | |
| * | |
| * @dev: the device in the usb interface | |
| * @udev: the detected usb device | |
| * @intf: the usb interface | |
| * @quirks: quirks | |
| * @ctrl_mutex: protects ctrl_buf | |
| * @ctrl_pipe: the control transfer pipe | |
| * @ctrlbuf_len: the size of the control transfer pipe | |
| * @ctrlbuf: the buffer used for control transfers | |
| * @bulk_mutex: protects tx_buf, rx_buf and split bulk-transfers getting interrupted | |
| * @tx_pipe: the bulk out pipe | |
| * @txbuf_len: the size of the bulk out pipe | |
| * @txbuf: the buffer used for bulk out transfers | |
| * @rx_pipe: the bulk in pipe | |
| * @rxbuf_len: the size of the bulk in pipe | |
| * @rxdat_len: the data length at rx buffer | |
| * @rxbuf: the buffer used for bulk in transfers | |
| * @urb: the urb to read bulk pipe | |
| * @done: completion object as request is done | |
| * @cli_list: device's client list | |
| * @nr_gpio_banks: Number of GPIO banks | |
| * @gpios: GPIO bank descriptors | |
| * @nr_gpio_banks: Number of I2C busses | |
| * @gpios: I2C bank descriptors | |
| */ | |
| struct usbio_device { | |
| struct device *dev; | |
| struct usb_device *udev; | |
| struct usb_interface *intf; | |
| unsigned long quirks; | |
| struct mutex ctrl_mutex; | |
| unsigned int ctrl_pipe; | |
| u16 ctrlbuf_len; | |
| void *ctrlbuf; | |
| struct mutex bulk_mutex; | |
| unsigned int tx_pipe; | |
| u16 txbuf_len; | |
| void *txbuf; | |
| unsigned int rx_pipe; | |
| u16 rxbuf_len; | |
| u16 rxdat_len; | |
| void *rxbuf; | |
| struct urb *urb; | |
| struct completion done; | |
| struct list_head cli_list; | |
| unsigned int nr_gpio_banks; | |
| struct usbio_gpio_bank_desc gpios[USBIO_MAX_GPIOBANKS]; | |
| unsigned int nr_i2c_buses; | |
| struct usbio_i2c_bus_desc i2cs[USBIO_MAX_I2CBUSES]; | |
| }; | |
| /** | |
| * struct usbio_client - represents a usbio client | |
| * | |
| * @auxdev: auxiliary device object | |
| * @mutex: protects @bridge | |
| * @bridge: usbio bridge who service the client | |
| * @link: usbio bridge clients list member | |
| */ | |
| struct usbio_client { | |
| struct auxiliary_device auxdev; | |
| struct mutex mutex; | |
| struct usbio_device *bridge; | |
| struct list_head link; | |
| }; | |
| #define adev_to_client(adev) container_of_const(adev, struct usbio_client, auxdev) | |
| static int usbio_ctrl_msg(struct usbio_device *usbio, u8 type, u8 cmd, | |
| const void *obuf, u16 obuf_len, void *ibuf, u16 ibuf_len) | |
| { | |
| u8 request = USB_TYPE_VENDOR | USB_RECIP_DEVICE; | |
| struct usbio_ctrl_packet *cpkt; | |
| unsigned int pipe; | |
| u16 cpkt_len; | |
| int ret; | |
| lockdep_assert_held(&usbio->ctrl_mutex); | |
| if ((obuf_len > (usbio->ctrlbuf_len - sizeof(*cpkt))) || | |
| (ibuf_len > (usbio->ctrlbuf_len - sizeof(*cpkt)))) | |
| return -EMSGSIZE; | |
| /* Prepare Control Packet Header */ | |
| cpkt = usbio->ctrlbuf; | |
| cpkt->header.type = type; | |
| cpkt->header.cmd = cmd; | |
| if (type == USBIO_PKTTYPE_CTRL || ibuf_len) | |
| cpkt->header.flags = USBIO_PKTFLAGS_REQRESP; | |
| else | |
| cpkt->header.flags = USBIO_PKTFLAG_CMP; | |
| cpkt->len = obuf_len; | |
| /* Copy the data */ | |
| memcpy(cpkt->data, obuf, obuf_len); | |
| pipe = usb_sndctrlpipe(usbio->udev, usbio->ctrl_pipe); | |
| cpkt_len = sizeof(*cpkt) + obuf_len; | |
| ret = usb_control_msg(usbio->udev, pipe, 0, request | USB_DIR_OUT, 0, 0, | |
| cpkt, cpkt_len, USBIO_CTRLXFER_TIMEOUT); | |
| dev_dbg(usbio->dev, "control out %d hdr %*phN data %*phN\n", ret, | |
| (int)sizeof(*cpkt), cpkt, (int)cpkt->len, cpkt->data); | |
| if (ret != cpkt_len) { | |
| dev_err(usbio->dev, "USB control out failed: %d\n", ret); | |
| return (ret < 0) ? ret : -EPROTO; | |
| } | |
| if (!(cpkt->header.flags & USBIO_PKTFLAG_ACK)) | |
| return 0; | |
| pipe = usb_rcvctrlpipe(usbio->udev, usbio->ctrl_pipe); | |
| cpkt_len = sizeof(*cpkt) + ibuf_len; | |
| ret = usb_control_msg(usbio->udev, pipe, 0, request | USB_DIR_IN, 0, 0, | |
| cpkt, cpkt_len, USBIO_CTRLXFER_TIMEOUT); | |
| dev_dbg(usbio->dev, "control in %d hdr %*phN data %*phN\n", ret, | |
| (int)sizeof(*cpkt), cpkt, (int)cpkt->len, cpkt->data); | |
| if (ret < sizeof(*cpkt)) { | |
| dev_err(usbio->dev, "USB control in failed: %d\n", ret); | |
| return (ret < 0) ? ret : -EPROTO; | |
| } | |
| if (cpkt->header.type != type || cpkt->header.cmd != cmd || | |
| !(cpkt->header.flags & USBIO_PKTFLAG_RSP)) { | |
| dev_err(usbio->dev, "Unexpected reply type: %u, cmd: %u, flags: %u\n", | |
| cpkt->header.type, cpkt->header.cmd, cpkt->header.flags); | |
| return -EPROTO; | |
| } | |
| if (cpkt->header.flags & USBIO_PKTFLAG_ERR) | |
| return -EREMOTEIO; | |
| if (ibuf_len < cpkt->len) | |
| return -ENOSPC; | |
| memcpy(ibuf, cpkt->data, cpkt->len); | |
| return cpkt->len; | |
| } | |
| int usbio_control_msg(struct auxiliary_device *adev, u8 type, u8 cmd, | |
| const void *obuf, u16 obuf_len, void *ibuf, u16 ibuf_len) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio; | |
| int ret; | |
| guard(mutex)(&client->mutex); | |
| usbio = client->bridge; | |
| if (!usbio) | |
| return -ENODEV; /* Disconnected */ | |
| ret = usb_autopm_get_interface(usbio->intf); | |
| if (ret) | |
| return ret; | |
| mutex_lock(&usbio->ctrl_mutex); | |
| ret = usbio_ctrl_msg(client->bridge, type, cmd, obuf, obuf_len, ibuf, ibuf_len); | |
| mutex_unlock(&usbio->ctrl_mutex); | |
| usb_autopm_put_interface(usbio->intf); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_control_msg, "USBIO"); | |
| static void usbio_bulk_recv(struct urb *urb) | |
| { | |
| struct usbio_bulk_packet *bpkt = urb->transfer_buffer; | |
| struct usbio_device *usbio = urb->context; | |
| if (!urb->status) { | |
| if (bpkt->header.flags & USBIO_PKTFLAG_RSP) { | |
| usbio->rxdat_len = urb->actual_length; | |
| complete(&usbio->done); | |
| } | |
| } else if (urb->status != -ENOENT) { | |
| dev_err(usbio->dev, "Bulk in error %d\n", urb->status); | |
| } | |
| usb_submit_urb(usbio->urb, GFP_ATOMIC); | |
| } | |
| int usbio_bulk_msg(struct auxiliary_device *adev, u8 type, u8 cmd, bool last, | |
| const void *obuf, u16 obuf_len, void *ibuf, u16 ibuf_len) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio = client->bridge; | |
| struct usbio_bulk_packet *bpkt; | |
| int ret, act = 0; | |
| u16 bpkt_len; | |
| lockdep_assert_held(&client->mutex); | |
| lockdep_assert_held(&usbio->bulk_mutex); | |
| if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || | |
| (ibuf_len > (usbio->rxbuf_len - sizeof(*bpkt)))) | |
| return -EMSGSIZE; | |
| if (ibuf_len) | |
| reinit_completion(&usbio->done); | |
| /* If no data to send, skip to read */ | |
| if (!obuf_len) | |
| goto read; | |
| /* Prepare Bulk Packet Header */ | |
| bpkt = usbio->txbuf; | |
| bpkt->header.type = type; | |
| bpkt->header.cmd = cmd; | |
| if (!last) | |
| bpkt->header.flags = 0; | |
| else if (ibuf_len) | |
| bpkt->header.flags = USBIO_PKTFLAGS_REQRESP; | |
| else | |
| bpkt->header.flags = USBIO_PKTFLAG_CMP; | |
| bpkt->len = cpu_to_le16(obuf_len); | |
| /* Copy the data */ | |
| memcpy(bpkt->data, obuf, obuf_len); | |
| bpkt_len = sizeof(*bpkt) + obuf_len; | |
| ret = usb_bulk_msg(usbio->udev, usbio->tx_pipe, bpkt, bpkt_len, &act, | |
| USBIO_BULKXFER_TIMEOUT); | |
| dev_dbg(usbio->dev, "bulk out %d hdr %*phN data %*phN\n", act, | |
| (int)sizeof(*bpkt), bpkt, obuf_len, bpkt->data); | |
| if (ret || act != bpkt_len) { | |
| dev_err(usbio->dev, "Bulk out failed: %d\n", ret); | |
| return ret ?: -EPROTO; | |
| } | |
| if (!(bpkt->header.flags & USBIO_PKTFLAG_ACK)) | |
| return obuf_len; | |
| read: | |
| ret = wait_for_completion_timeout(&usbio->done, USBIO_BULKXFER_TIMEOUT); | |
| if (ret <= 0) { | |
| dev_err(usbio->dev, "Bulk in wait failed: %d\n", ret); | |
| return ret ?: -ETIMEDOUT; | |
| } | |
| act = usbio->rxdat_len; | |
| bpkt = usbio->rxbuf; | |
| bpkt_len = le16_to_cpu(bpkt->len); | |
| dev_dbg(usbio->dev, "bulk in %d hdr %*phN data %*phN\n", act, | |
| (int)sizeof(*bpkt), bpkt, bpkt_len, bpkt->data); | |
| /* | |
| * Unsupported bulk commands get only an usbio_packet_header with | |
| * the error flag set as reply. Return -EPIPE for this case. | |
| */ | |
| if (act == sizeof(struct usbio_packet_header) && | |
| (bpkt->header.flags & USBIO_PKTFLAG_ERR)) | |
| return -EPIPE; | |
| if (act < sizeof(*bpkt)) { | |
| dev_err(usbio->dev, "Bulk in short read: %d\n", act); | |
| return -EPROTO; | |
| } | |
| if (bpkt->header.type != type || bpkt->header.cmd != cmd || | |
| !(bpkt->header.flags & USBIO_PKTFLAG_RSP)) { | |
| dev_err(usbio->dev, | |
| "Unexpected bulk in type 0x%02x cmd 0x%02x flags 0x%02x\n", | |
| bpkt->header.type, bpkt->header.cmd, bpkt->header.flags); | |
| return -EPROTO; | |
| } | |
| if (bpkt->header.flags & USBIO_PKTFLAG_ERR) | |
| return -EREMOTEIO; | |
| if (ibuf_len < bpkt_len) | |
| return -ENOSPC; | |
| /* The device must not claim more payload than it actually sent. */ | |
| if (bpkt_len > act - sizeof(*bpkt)) | |
| return -EPROTO; | |
| memcpy(ibuf, bpkt->data, bpkt_len); | |
| return bpkt_len; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_bulk_msg, "USBIO"); | |
| int usbio_acquire(struct auxiliary_device *adev) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio; | |
| int ret; | |
| mutex_lock(&client->mutex); | |
| usbio = client->bridge; | |
| if (!usbio) { | |
| ret = -ENODEV; /* Disconnected */ | |
| goto err_unlock; | |
| } | |
| ret = usb_autopm_get_interface(usbio->intf); | |
| if (ret) | |
| goto err_unlock; | |
| mutex_lock(&usbio->bulk_mutex); | |
| /* Leave client locked until release to avoid abba deadlock issues */ | |
| return 0; | |
| err_unlock: | |
| mutex_unlock(&client->mutex); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_acquire, "USBIO"); | |
| void usbio_release(struct auxiliary_device *adev) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio = client->bridge; | |
| lockdep_assert_held(&client->mutex); | |
| mutex_unlock(&usbio->bulk_mutex); | |
| usb_autopm_put_interface(usbio->intf); | |
| mutex_unlock(&client->mutex); | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_release, "USBIO"); | |
| void usbio_get_txrxbuf_len(struct auxiliary_device *adev, u16 *txbuf_len, u16 *rxbuf_len) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio; | |
| guard(mutex)(&client->mutex); | |
| usbio = client->bridge; | |
| if (!usbio) | |
| return; /* Disconnected */ | |
| *txbuf_len = usbio->txbuf_len; | |
| *rxbuf_len = usbio->rxbuf_len; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_get_txrxbuf_len, "USBIO"); | |
| unsigned long usbio_get_quirks(struct auxiliary_device *adev) | |
| { | |
| struct usbio_client *client = adev_to_client(adev); | |
| struct usbio_device *usbio; | |
| guard(mutex)(&client->mutex); | |
| usbio = client->bridge; | |
| if (!usbio) | |
| return 0; /* Disconnected */ | |
| return usbio->quirks; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_get_quirks, "USBIO"); | |
| static void usbio_auxdev_release(struct device *dev) | |
| { | |
| struct auxiliary_device *adev = to_auxiliary_dev(dev); | |
| struct usbio_client *client = adev_to_client(adev); | |
| mutex_destroy(&client->mutex); | |
| kfree(client); | |
| } | |
| static int usbio_add_client(struct usbio_device *usbio, char *name, u8 id, void *data) | |
| { | |
| struct usbio_client *client; | |
| struct auxiliary_device *adev; | |
| int ret; | |
| client = kzalloc_obj(*client); | |
| if (!client) | |
| return -ENOMEM; | |
| mutex_init(&client->mutex); | |
| client->bridge = usbio; | |
| adev = &client->auxdev; | |
| adev->name = name; | |
| adev->id = id; | |
| adev->dev.parent = usbio->dev; | |
| adev->dev.platform_data = data; | |
| adev->dev.release = usbio_auxdev_release; | |
| ret = auxiliary_device_init(adev); | |
| if (ret) { | |
| usbio_auxdev_release(&adev->dev); | |
| return ret; | |
| } | |
| ret = auxiliary_device_add(adev); | |
| if (ret) { | |
| auxiliary_device_uninit(adev); | |
| return ret; | |
| } | |
| list_add_tail(&client->link, &usbio->cli_list); | |
| return 0; | |
| } | |
| static int usbio_enum_gpios(struct usbio_device *usbio) | |
| { | |
| struct usbio_gpio_bank_desc *gpio = usbio->gpios; | |
| dev_dbg(usbio->dev, "GPIO Banks: %d\n", usbio->nr_gpio_banks); | |
| for (unsigned int i = 0; i < usbio->nr_gpio_banks; i++) | |
| dev_dbg(usbio->dev, "\tBank%d[%d] map: %#08x\n", | |
| gpio[i].id, gpio[i].pins, gpio[i].bmap); | |
| usbio_add_client(usbio, USBIO_GPIO_CLIENT, 0, gpio); | |
| return 0; | |
| } | |
| static int usbio_enum_i2cs(struct usbio_device *usbio) | |
| { | |
| struct usbio_i2c_bus_desc *i2c = usbio->i2cs; | |
| dev_dbg(usbio->dev, "I2C Busses: %d\n", usbio->nr_i2c_buses); | |
| for (unsigned int i = 0; i < usbio->nr_i2c_buses; i++) { | |
| dev_dbg(usbio->dev, "\tBus%d caps: %#02x\n", i2c[i].id, i2c[i].caps); | |
| usbio_add_client(usbio, USBIO_I2C_CLIENT, i, &i2c[i]); | |
| } | |
| return 0; | |
| } | |
| static int usbio_suspend(struct usb_interface *intf, pm_message_t msg) | |
| { | |
| struct usbio_device *usbio = usb_get_intfdata(intf); | |
| usb_kill_urb(usbio->urb); | |
| return 0; | |
| } | |
| static int usbio_resume(struct usb_interface *intf) | |
| { | |
| struct usbio_device *usbio = usb_get_intfdata(intf); | |
| return usb_submit_urb(usbio->urb, GFP_KERNEL); | |
| } | |
| static void usbio_disconnect(struct usb_interface *intf) | |
| { | |
| struct usbio_device *usbio = usb_get_intfdata(intf); | |
| struct usbio_client *client, *next; | |
| /* Wakeup any clients waiting for a reply */ | |
| usbio->rxdat_len = 0; | |
| complete(&usbio->done); | |
| /* Let clients know the bridge is gone */ | |
| list_for_each_entry(client, &usbio->cli_list, link) { | |
| mutex_lock(&client->mutex); | |
| client->bridge = NULL; | |
| mutex_unlock(&client->mutex); | |
| } | |
| /* From here on clients will no longer touch struct usbio_device */ | |
| usb_kill_urb(usbio->urb); | |
| usb_free_urb(usbio->urb); | |
| list_for_each_entry_safe_reverse(client, next, &usbio->cli_list, link) { | |
| auxiliary_device_delete(&client->auxdev); | |
| auxiliary_device_uninit(&client->auxdev); | |
| } | |
| } | |
| static int usbio_probe(struct usb_interface *intf, const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct usb_endpoint_descriptor *ep_in, *ep_out; | |
| struct device *dev = &intf->dev; | |
| struct usbio_protver protver; | |
| struct usbio_device *usbio; | |
| struct usbio_fwver fwver; | |
| int ret; | |
| usbio = devm_kzalloc(dev, sizeof(*usbio), GFP_KERNEL); | |
| if (!usbio) | |
| return -ENOMEM; | |
| ret = devm_mutex_init(dev, &usbio->ctrl_mutex); | |
| if (ret) | |
| return ret; | |
| ret = devm_mutex_init(dev, &usbio->bulk_mutex); | |
| if (ret) | |
| return ret; | |
| usbio->dev = dev; | |
| usbio->udev = udev; | |
| usbio->intf = intf; | |
| usbio->quirks = id ? id->driver_info : 0; | |
| init_completion(&usbio->done); | |
| INIT_LIST_HEAD(&usbio->cli_list); | |
| usb_set_intfdata(intf, usbio); | |
| usbio->ctrl_pipe = usb_endpoint_num(&udev->ep0.desc); | |
| usbio->ctrlbuf_len = usb_maxpacket(udev, usbio->ctrl_pipe); | |
| usbio->ctrlbuf = devm_kzalloc(dev, usbio->ctrlbuf_len, GFP_KERNEL); | |
| if (!usbio->ctrlbuf) | |
| return -ENOMEM; | |
| /* Find the first bulk-in and bulk-out endpoints */ | |
| ret = usb_find_common_endpoints(intf->cur_altsetting, &ep_in, &ep_out, | |
| NULL, NULL); | |
| if (ret) { | |
| dev_err(dev, "Cannot find bulk endpoints: %d\n", ret); | |
| return ret; | |
| } | |
| usbio->tx_pipe = usb_sndbulkpipe(udev, usb_endpoint_num(ep_out)); | |
| if (usbio->quirks & USBIO_QUIRK_BULK_MAXP_63) | |
| usbio->txbuf_len = 63; | |
| else | |
| usbio->txbuf_len = usb_endpoint_maxp(ep_out); | |
| usbio->txbuf = devm_kzalloc(dev, usbio->txbuf_len, GFP_KERNEL); | |
| if (!usbio->txbuf) | |
| return -ENOMEM; | |
| usbio->rx_pipe = usb_rcvbulkpipe(udev, usb_endpoint_num(ep_in)); | |
| if (usbio->quirks & USBIO_QUIRK_BULK_MAXP_63) | |
| usbio->rxbuf_len = 63; | |
| else | |
| usbio->rxbuf_len = usb_endpoint_maxp(ep_in); | |
| usbio->rxbuf = devm_kzalloc(dev, usbio->rxbuf_len, GFP_KERNEL); | |
| if (!usbio->rxbuf) | |
| return -ENOMEM; | |
| usbio->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!usbio->urb) | |
| return -ENOMEM; | |
| usb_fill_bulk_urb(usbio->urb, udev, usbio->rx_pipe, usbio->rxbuf, | |
| usbio->rxbuf_len, usbio_bulk_recv, usbio); | |
| ret = usb_submit_urb(usbio->urb, GFP_KERNEL); | |
| if (ret) { | |
| dev_err_probe(dev, ret, "Submitting usb urb\n"); | |
| goto err_free_urb; | |
| } | |
| mutex_lock(&usbio->ctrl_mutex); | |
| ret = usbio_ctrl_msg(usbio, USBIO_PKTTYPE_CTRL, USBIO_CTRLCMD_HS, NULL, 0, NULL, 0); | |
| if (ret < 0) | |
| goto err_unlock; | |
| ret = usbio_ctrl_msg(usbio, USBIO_PKTTYPE_CTRL, USBIO_CTRLCMD_PROTVER, NULL, 0, | |
| &protver, sizeof(protver)); | |
| if (ret < 0) | |
| goto err_unlock; | |
| ret = usbio_ctrl_msg(usbio, USBIO_PKTTYPE_CTRL, USBIO_CTRLCMD_FWVER, NULL, 0, | |
| &fwver, sizeof(fwver)); | |
| if (ret < 0) | |
| goto err_unlock; | |
| ret = usbio_ctrl_msg(usbio, USBIO_PKTTYPE_CTRL, USBIO_CTRLCMD_ENUMGPIO, NULL, 0, | |
| usbio->gpios, sizeof(usbio->gpios)); | |
| if (ret < 0 || ret % sizeof(struct usbio_gpio_bank_desc)) { | |
| ret = (ret < 0) ? ret : -EPROTO; | |
| goto err_unlock; | |
| } | |
| usbio->nr_gpio_banks = ret / sizeof(struct usbio_gpio_bank_desc); | |
| ret = usbio_ctrl_msg(usbio, USBIO_PKTTYPE_CTRL, USBIO_CTRLCMD_ENUMI2C, NULL, 0, | |
| usbio->i2cs, sizeof(usbio->i2cs)); | |
| if (ret < 0 || ret % sizeof(struct usbio_i2c_bus_desc)) { | |
| ret = (ret < 0) ? ret : -EPROTO; | |
| goto err_unlock; | |
| } | |
| usbio->nr_i2c_buses = ret / sizeof(struct usbio_i2c_bus_desc); | |
| mutex_unlock(&usbio->ctrl_mutex); | |
| dev_dbg(dev, "ProtVer(BCD): %02x FwVer: %d.%d.%d.%d\n", | |
| protver.ver, fwver.major, fwver.minor, | |
| le16_to_cpu(fwver.patch), le16_to_cpu(fwver.build)); | |
| usbio_enum_gpios(usbio); | |
| usbio_enum_i2cs(usbio); | |
| return 0; | |
| err_unlock: | |
| mutex_unlock(&usbio->ctrl_mutex); | |
| usb_kill_urb(usbio->urb); | |
| err_free_urb: | |
| usb_free_urb(usbio->urb); | |
| return ret; | |
| } | |
| static const struct usb_device_id usbio_table[] = { | |
| { USB_DEVICE(0x2ac1, 0x20c1), /* Lattice NX40 */ | |
| .driver_info = USBIO_QUIRK_I2C_MAX_RW_LEN_52 }, | |
| { USB_DEVICE(0x2ac1, 0x20c9), /* Lattice NX33 */ | |
| .driver_info = USBIO_QUIRK_I2C_NO_INIT_ACK | USBIO_QUIRK_I2C_MAX_RW_LEN_52 | | |
| USBIO_QUIRK_I2C_ALLOW_400KHZ }, | |
| { USB_DEVICE(0x2ac1, 0x20cb) }, /* Lattice NX33U */ | |
| { USB_DEVICE(0x06cb, 0x0701), /* Synaptics Sabre */ | |
| .driver_info = USBIO_QUIRK_BULK_MAXP_63 | USBIO_QUIRK_I2C_USE_CHUNK_LEN }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, usbio_table); | |
| static struct usb_driver usbio_driver = { | |
| .name = "usbio-bridge", | |
| .probe = usbio_probe, | |
| .disconnect = usbio_disconnect, | |
| .suspend = usbio_suspend, | |
| .resume = usbio_resume, | |
| .id_table = usbio_table, | |
| .supports_autosuspend = 1, | |
| }; | |
| module_usb_driver(usbio_driver); | |
| struct usbio_match_ids_walk_data { | |
| struct acpi_device *adev; | |
| const struct acpi_device_id *hids; | |
| unsigned int id; | |
| }; | |
| static int usbio_match_device_ids(struct acpi_device *adev, void *data) | |
| { | |
| struct usbio_match_ids_walk_data *wd = data; | |
| unsigned int id = 0; | |
| char *uid; | |
| if (acpi_match_device_ids(adev, wd->hids)) | |
| return 0; | |
| uid = acpi_device_uid(adev); | |
| if (uid) { | |
| for (int i = 0; i < strlen(uid); i++) { | |
| if (!kstrtouint(&uid[i], 10, &id)) | |
| break; | |
| } | |
| } | |
| if (!uid || wd->id == id) { | |
| wd->adev = adev; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| void usbio_acpi_bind(struct auxiliary_device *adev, const struct acpi_device_id *hids) | |
| { | |
| struct device *dev = &adev->dev; | |
| struct acpi_device *parent; | |
| struct usbio_match_ids_walk_data wd = { | |
| .adev = NULL, | |
| .hids = hids, | |
| .id = adev->id, | |
| }; | |
| parent = ACPI_COMPANION(dev->parent); | |
| if (!parent) | |
| return; | |
| acpi_dev_for_each_child(parent, usbio_match_device_ids, &wd); | |
| if (wd.adev) | |
| ACPI_COMPANION_SET(dev, wd.adev); | |
| } | |
| EXPORT_SYMBOL_NS_GPL(usbio_acpi_bind, "USBIO"); | |
| MODULE_DESCRIPTION("Intel USBIO Bridge driver"); | |
| MODULE_AUTHOR("Israel Cepeda <israel.a.cepeda.lopez@intel.com>"); | |
| MODULE_AUTHOR("Hans de Goede <hansg@kernel.org>"); | |
| MODULE_LICENSE("GPL"); |