blob: ebf9e217612d65bee7d489ed55b7a77b2bd0d6da [file] [log] [blame]
/*
* Copyright 2007 David Gibson, IBM Corporation.
*
* Based on earlier code:
* Matt Porter <mporter@kernel.crashing.org>
* Copyright 2002-2005 MontaVista Software Inc.
*
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003, 2004 Zultys Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stddef.h>
#include "types.h"
#include "string.h"
#include "stdio.h"
#include "ops.h"
#include "reg.h"
#include "dcr.h"
/* Read the 4xx SDRAM controller to get size of system memory. */
void ibm4xx_fixup_memsize(void)
{
int i;
unsigned long memsize, bank_config;
memsize = 0;
for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]);
bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
}
dt_fixup_memory(0, memsize);
}
/* 4xx DDR1/2 Denali memory controller support */
/* DDR0 registers */
#define DDR0_02 2
#define DDR0_08 8
#define DDR0_10 10
#define DDR0_14 14
#define DDR0_42 42
#define DDR0_43 43
/* DDR0_02 */
#define DDR_START 0x1
#define DDR_START_SHIFT 0
#define DDR_MAX_CS_REG 0x3
#define DDR_MAX_CS_REG_SHIFT 24
#define DDR_MAX_COL_REG 0xf
#define DDR_MAX_COL_REG_SHIFT 16
#define DDR_MAX_ROW_REG 0xf
#define DDR_MAX_ROW_REG_SHIFT 8
/* DDR0_08 */
#define DDR_DDR2_MODE 0x1
#define DDR_DDR2_MODE_SHIFT 0
/* DDR0_10 */
#define DDR_CS_MAP 0x3
#define DDR_CS_MAP_SHIFT 8
/* DDR0_14 */
#define DDR_REDUC 0x1
#define DDR_REDUC_SHIFT 16
/* DDR0_42 */
#define DDR_APIN 0x7
#define DDR_APIN_SHIFT 24
/* DDR0_43 */
#define DDR_COL_SZ 0x7
#define DDR_COL_SZ_SHIFT 8
#define DDR_BANK8 0x1
#define DDR_BANK8_SHIFT 0
#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
static inline u32 mfdcr_sdram0(u32 reg)
{
mtdcr(DCRN_SDRAM0_CFGADDR, reg);
return mfdcr(DCRN_SDRAM0_CFGDATA);
}
void ibm4xx_denali_fixup_memsize(void)
{
u32 val, max_cs, max_col, max_row;
u32 cs, col, row, bank, dpath;
unsigned long memsize;
val = mfdcr_sdram0(DDR0_02);
if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
fatal("DDR controller is not initialized\n");
/* get maximum cs col and row values */
max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
/* get CS value */
val = mfdcr_sdram0(DDR0_10);
val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
cs = 0;
while (val) {
if (val && 0x1)
cs++;
val = val >> 1;
}
if (!cs)
fatal("No memory installed\n");
if (cs > max_cs)
fatal("DDR wrong CS configuration\n");
/* get data path bytes */
val = mfdcr_sdram0(DDR0_14);
if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
dpath = 8; /* 64 bits */
else
dpath = 4; /* 32 bits */
/* get adress pins (rows) */
val = mfdcr_sdram0(DDR0_42);
row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
if (row > max_row)
fatal("DDR wrong APIN configuration\n");
row = max_row - row;
/* get collomn size and banks */
val = mfdcr_sdram0(DDR0_43);
col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
if (col > max_col)
fatal("DDR wrong COL configuration\n");
col = max_col - col;
if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
bank = 8; /* 8 banks */
else
bank = 4; /* 4 banks */
memsize = cs * (1 << (col+row)) * bank * dpath;
dt_fixup_memory(0, memsize);
}
#define SPRN_DBCR0_40X 0x3F2
#define SPRN_DBCR0_44X 0x134
#define DBCR0_RST_SYSTEM 0x30000000
void ibm44x_dbcr_reset(void)
{
unsigned long tmp;
asm volatile (
"mfspr %0,%1\n"
"oris %0,%0,%2@h\n"
"mtspr %1,%0"
: "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM)
);
}
void ibm40x_dbcr_reset(void)
{
unsigned long tmp;
asm volatile (
"mfspr %0,%1\n"
"oris %0,%0,%2@h\n"
"mtspr %1,%0"
: "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM)
);
}
#define EMAC_RESET 0x20000000
void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
{
/* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */
if (emac0)
*emac0 = EMAC_RESET;
if (emac1)
*emac1 = EMAC_RESET;
mtdcr(DCRN_MAL0_CFG, MAL_RESET);
}
/* Read 4xx EBC bus bridge registers to get mappings of the peripheral
* banks into the OPB address space */
void ibm4xx_fixup_ebc_ranges(const char *ebc)
{
void *devp;
u32 bxcr;
u32 ranges[EBC_NUM_BANKS*4];
u32 *p = ranges;
int i;
for (i = 0; i < EBC_NUM_BANKS; i++) {
mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i));
bxcr = mfdcr(DCRN_EBC0_CFGDATA);
if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) {
*p++ = i;
*p++ = 0;
*p++ = bxcr & EBC_BXCR_BAS;
*p++ = EBC_BXCR_BANK_SIZE(bxcr);
}
}
devp = finddevice(ebc);
if (! devp)
fatal("Couldn't locate EBC node %s\n\r", ebc);
setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
}
#define SPRN_CCR1 0x378
void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
{
u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
u32 reg;
u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x000F0000) >> 16;
fwdva = tmp ? tmp : 16;
tmp = (reg & 0x00000700) >> 8;
fwdvb = tmp ? tmp : 8;
tmp = (reg & 0x1F000000) >> 24;
fbdv = tmp ? tmp : 32;
lfbdv = (reg & 0x0000007F);
mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x03000000) >> 24;
opbdv0 = tmp ? tmp : 4;
mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x07000000) >> 24;
perdv0 = tmp ? tmp : 8;
mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x07000000) >> 24;
prbdv0 = tmp ? tmp : 8;
mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x03000000) >> 24;
spcid0 = tmp ? tmp : 4;
/* Calculate M */
mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
reg = mfdcr(DCRN_CPR0_DATA);
tmp = (reg & 0x03000000) >> 24;
if (tmp == 0) { /* PLL output */
tmp = (reg & 0x20000000) >> 29;
if (!tmp) /* PLLOUTA */
m = fbdv * lfbdv * fwdva;
else
m = fbdv * lfbdv * fwdvb;
}
else if (tmp == 1) /* CPU output */
m = fbdv * fwdva;
else
m = perdv0 * opbdv0 * fwdvb;
vco = (m * sysclk) + (m >> 1);
cpu = vco / fwdva;
plb = vco / fwdvb / prbdv0;
opb = plb / opbdv0;
ebc = plb / perdv0;
/* FIXME */
uart0 = ser_clk;
/* Figure out timebase. Either CPU or default TmrClk */
asm volatile (
"mfspr %0,%1\n"
:
"=&r"(reg) : "i"(SPRN_CCR1));
if (reg & 0x0080)
tb = 25000000; /* TmrClk is 25MHz */
else
tb = cpu;
dt_fixup_cpu_clocks(cpu, tb, 0);
dt_fixup_clock("/plb", plb);
dt_fixup_clock("/plb/opb", opb);
dt_fixup_clock("/plb/opb/ebc", ebc);
dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
dt_fixup_clock("/plb/opb/serial@ef600400", uart0);
dt_fixup_clock("/plb/opb/serial@ef600500", uart0);
dt_fixup_clock("/plb/opb/serial@ef600600", uart0);
}