| config SND_SOC_TEGRA |
| tristate "SoC Audio for the Tegra System-on-Chip" |
| depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA |
| select REGMAP_MMIO |
| help |
| Say Y or M here if you want support for SoC audio on Tegra. |
| |
| config SND_SOC_TEGRA20_DAS |
| tristate |
| depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC |
| help |
| Say Y or M if you want to add support for the Tegra20 DAS module. |
| You will also need to select the individual machine drivers to |
| support below. |
| |
| config SND_SOC_TEGRA20_I2S |
| tristate |
| depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC |
| select SND_SOC_TEGRA20_DAS |
| help |
| Say Y or M if you want to add support for codecs attached to the |
| Tegra20 I2S interface. You will also need to select the individual |
| machine drivers to support below. |
| |
| config SND_SOC_TEGRA20_SPDIF |
| tristate |
| depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC |
| default m |
| help |
| Say Y or M if you want to add support for the Tegra20 SPDIF interface. |
| You will also need to select the individual machine drivers to support |
| below. |
| |
| config SND_SOC_TEGRA30_AHUB |
| tristate |
| depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC |
| help |
| Say Y or M if you want to add support for the Tegra20 AHUB module. |
| You will also need to select the individual machine drivers to |
| support below. |
| |
| config SND_SOC_TEGRA30_I2S |
| tristate |
| depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC |
| select SND_SOC_TEGRA30_AHUB |
| help |
| Say Y or M if you want to add support for codecs attached to the |
| Tegra30 I2S interface. You will also need to select the individual |
| machine drivers to support below. |
| |
| config SND_SOC_TEGRA_WM8753 |
| tristate "SoC Audio support for Tegra boards using a WM8753 codec" |
| depends on SND_SOC_TEGRA && I2C |
| select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC |
| select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC |
| select SND_SOC_WM8753 |
| help |
| Say Y or M here if you want to add support for SoC audio on Tegra |
| boards using the WM8753 codec, such as Whistler. |
| |
| config SND_SOC_TEGRA_WM8903 |
| tristate "SoC Audio support for Tegra boards using a WM8903 codec" |
| depends on SND_SOC_TEGRA && I2C |
| select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC |
| select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC |
| select SND_SOC_WM8903 |
| help |
| Say Y or M here if you want to add support for SoC audio on Tegra |
| boards using the WM8093 codec. Currently, the supported boards are |
| Harmony, Ventana, Seaboard, Kaen, and Aebl. |
| |
| config SND_SOC_TEGRA_TRIMSLICE |
| tristate "SoC Audio support for TrimSlice board" |
| depends on SND_SOC_TEGRA && I2C |
| select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC |
| select SND_SOC_TLV320AIC23 |
| help |
| Say Y or M here if you want to add support for SoC audio on the |
| TrimSlice platform. |
| |
| config SND_SOC_TEGRA_ALC5632 |
| tristate "SoC Audio support for Tegra boards using an ALC5632 codec" |
| depends on SND_SOC_TEGRA && I2C |
| select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC |
| select SND_SOC_ALC5632 |
| help |
| Say Y or M here if you want to add support for SoC audio on the |
| Toshiba AC100 netbook. |
