blob: 86235919c2d15fe2f2fe855c39a4e4c9ba300f08 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* S390 low-level entry points.
*
* Copyright IBM Corp. 1999, 2012
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
* Heiko Carstens <heiko.carstens@de.ibm.com>
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/alternative-asm.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/ctl_reg.h>
#include <asm/dwarf.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/sigp.h>
#include <asm/irq.h>
#include <asm/vx-insn.h>
#include <asm/setup.h>
#include <asm/nmi.h>
#include <asm/export.h>
#include <asm/nospec-insn.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
__PT_R2 = __PT_GPRS + 16
__PT_R3 = __PT_GPRS + 24
__PT_R4 = __PT_GPRS + 32
__PT_R5 = __PT_GPRS + 40
__PT_R6 = __PT_GPRS + 48
__PT_R7 = __PT_GPRS + 56
__PT_R8 = __PT_GPRS + 64
__PT_R9 = __PT_GPRS + 72
__PT_R10 = __PT_GPRS + 80
__PT_R11 = __PT_GPRS + 88
__PT_R12 = __PT_GPRS + 96
__PT_R13 = __PT_GPRS + 104
__PT_R14 = __PT_GPRS + 112
__PT_R15 = __PT_GPRS + 120
STACK_SHIFT = PAGE_SHIFT + THREAD_SIZE_ORDER
STACK_SIZE = 1 << STACK_SHIFT
STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE
_TIF_WORK = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_UPROBE | _TIF_GUARDED_STORAGE | _TIF_PATCH_PENDING)
_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
_TIF_SYSCALL_TRACEPOINT)
_CIF_WORK = (_CIF_ASCE_PRIMARY | _CIF_ASCE_SECONDARY | _CIF_FPU)
_PIF_WORK = (_PIF_PER_TRAP | _PIF_SYSCALL_RESTART)
_LPP_OFFSET = __LC_LPP
.macro TRACE_IRQS_ON
#ifdef CONFIG_TRACE_IRQFLAGS
basr %r2,%r0
brasl %r14,trace_hardirqs_on_caller
#endif
.endm
.macro TRACE_IRQS_OFF
#ifdef CONFIG_TRACE_IRQFLAGS
basr %r2,%r0
brasl %r14,trace_hardirqs_off_caller
#endif
.endm
.macro LOCKDEP_SYS_EXIT
#ifdef CONFIG_LOCKDEP
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jz .+10
brasl %r14,lockdep_sys_exit
#endif
.endm
.macro CHECK_STACK savearea
#ifdef CONFIG_CHECK_STACK
tml %r15,STACK_SIZE - CONFIG_STACK_GUARD
lghi %r14,\savearea
jz stack_overflow
#endif
.endm
.macro CHECK_VMAP_STACK savearea,oklabel
#ifdef CONFIG_VMAP_STACK
lgr %r14,%r15
nill %r14,0x10000 - STACK_SIZE
oill %r14,STACK_INIT
clg %r14,__LC_KERNEL_STACK
je \oklabel
clg %r14,__LC_ASYNC_STACK
je \oklabel
clg %r14,__LC_NODAT_STACK
je \oklabel
clg %r14,__LC_RESTART_STACK
je \oklabel
lghi %r14,\savearea
j stack_overflow
#else
j \oklabel
#endif
.endm
.macro SWITCH_ASYNC savearea,timer
tmhh %r8,0x0001 # interrupting from user ?
jnz 2f
#if IS_ENABLED(CONFIG_KVM)
lgr %r14,%r9
larl %r13,.Lsie_gmap
slgr %r14,%r13
lghi %r13,.Lsie_done - .Lsie_gmap
clgr %r14,%r13
jhe 0f
lghi %r11,\savearea # inside critical section, do cleanup
brasl %r14,.Lcleanup_sie
#endif
0: larl %r13,.Lpsw_idle_exit
cgr %r13,%r9
jne 1f
mvc __CLOCK_IDLE_EXIT(8,%r2), __LC_INT_CLOCK
mvc __TIMER_IDLE_EXIT(8,%r2), __LC_ASYNC_ENTER_TIMER
# account system time going idle
ni __LC_CPU_FLAGS+7,255-_CIF_ENABLED_WAIT
lg %r13,__LC_STEAL_TIMER
alg %r13,__CLOCK_IDLE_ENTER(%r2)
slg %r13,__LC_LAST_UPDATE_CLOCK
stg %r13,__LC_STEAL_TIMER
mvc __LC_LAST_UPDATE_CLOCK(8),__CLOCK_IDLE_EXIT(%r2)
lg %r13,__LC_SYSTEM_TIMER
alg %r13,__LC_LAST_UPDATE_TIMER
slg %r13,__TIMER_IDLE_ENTER(%r2)
stg %r13,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__TIMER_IDLE_EXIT(%r2)
nihh %r8,0xfcfd # clear wait state and irq bits
1: lg %r14,__LC_ASYNC_STACK # are we already on the target stack?
slgr %r14,%r15
srag %r14,%r14,STACK_SHIFT
jnz 3f
CHECK_STACK \savearea
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
j 4f
2: UPDATE_VTIME %r14,%r15,\timer
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
3: lg %r15,__LC_ASYNC_STACK # load async stack
4: la %r11,STACK_FRAME_OVERHEAD(%r15)
.endm
.macro UPDATE_VTIME w1,w2,enter_timer
lg \w1,__LC_EXIT_TIMER
lg \w2,__LC_LAST_UPDATE_TIMER
slg \w1,\enter_timer
slg \w2,__LC_EXIT_TIMER
alg \w1,__LC_USER_TIMER
alg \w2,__LC_SYSTEM_TIMER
stg \w1,__LC_USER_TIMER
stg \w2,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),\enter_timer
.endm
.macro RESTORE_SM_CLEAR_PER
stg %r8,__LC_RETURN_PSW
ni __LC_RETURN_PSW,0xbf
ssm __LC_RETURN_PSW
.endm
.macro ENABLE_INTS
stosm __SF_EMPTY(%r15),3
.endm
.macro ENABLE_INTS_TRACE
TRACE_IRQS_ON
ENABLE_INTS
.endm
.macro DISABLE_INTS
stnsm __SF_EMPTY(%r15),0xfc
.endm
.macro DISABLE_INTS_TRACE
DISABLE_INTS
TRACE_IRQS_OFF
.endm
.macro STCK savearea
#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
.insn s,0xb27c0000,\savearea # store clock fast
#else
.insn s,0xb2050000,\savearea # store clock
#endif
.endm
/*
* The TSTMSK macro generates a test-under-mask instruction by
* calculating the memory offset for the specified mask value.
* Mask value can be any constant. The macro shifts the mask
* value to calculate the memory offset for the test-under-mask
* instruction.
*/
.macro TSTMSK addr, mask, size=8, bytepos=0
.if (\bytepos < \size) && (\mask >> 8)
.if (\mask & 0xff)
.error "Mask exceeds byte boundary"
.endif
TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
.exitm
.endif
.ifeq \mask
.error "Mask must not be zero"
.endif
off = \size - \bytepos - 1
tm off+\addr, \mask
.endm
.macro BPOFF
ALTERNATIVE "", ".long 0xb2e8c000", 82
.endm
.macro BPON
ALTERNATIVE "", ".long 0xb2e8d000", 82
.endm
.macro BPENTER tif_ptr,tif_mask
ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .long 0xb2e8d000", \
"", 82
.endm
.macro BPEXIT tif_ptr,tif_mask
TSTMSK \tif_ptr,\tif_mask
ALTERNATIVE "jz .+8; .long 0xb2e8c000", \
"jnz .+8; .long 0xb2e8d000", 82
.endm
GEN_BR_THUNK %r9
GEN_BR_THUNK %r14
GEN_BR_THUNK %r14,%r11
.section .kprobes.text, "ax"
.Ldummy:
/*
* This nop exists only in order to avoid that __switch_to starts at
* the beginning of the kprobes text section. In that case we would
* have several symbols at the same address. E.g. objdump would take
* an arbitrary symbol name when disassembling this code.
* With the added nop in between the __switch_to symbol is unique
* again.
*/
nop 0
ENTRY(__bpon)
.globl __bpon
BPON
BR_EX %r14
ENDPROC(__bpon)
/*
* Scheduler resume function, called by switch_to
* gpr2 = (task_struct *) prev
* gpr3 = (task_struct *) next
* Returns:
* gpr2 = prev
*/
ENTRY(__switch_to)
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
lghi %r4,__TASK_stack
lghi %r1,__TASK_thread
llill %r5,STACK_INIT
stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev
lg %r15,0(%r4,%r3) # start of kernel stack of next
agr %r15,%r5 # end of kernel stack of next
stg %r3,__LC_CURRENT # store task struct of next
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next
aghi %r3,__TASK_pid
mvc __LC_CURRENT_PID(4,%r0),0(%r3) # store pid of next
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
BR_EX %r14
ENDPROC(__switch_to)
#if IS_ENABLED(CONFIG_KVM)
/*
* sie64a calling convention:
* %r2 pointer to sie control block
* %r3 guest register save area
*/
ENTRY(sie64a)
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
lg %r12,__LC_CURRENT
stg %r2,__SF_SIE_CONTROL(%r15) # save control block pointer
stg %r3,__SF_SIE_SAVEAREA(%r15) # save guest register save area
xc __SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
mvc __SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags
TSTMSK __LC_CPU_FLAGS,_CIF_FPU # load guest fp/vx registers ?
jno .Lsie_load_guest_gprs
brasl %r14,load_fpu_regs # load guest fp/vx regs
.Lsie_load_guest_gprs:
lmg %r0,%r13,0(%r3) # load guest gprs 0-13
lg %r14,__LC_GMAP # get gmap pointer
ltgr %r14,%r14
jz .Lsie_gmap
lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
.Lsie_gmap:
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
tm __SIE_PROG20+3(%r14),3 # last exit...
jnz .Lsie_skip
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lsie_skip # exit if fp/vx regs changed
BPEXIT __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
.Lsie_entry:
sie 0(%r14)
BPOFF
BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
.Lsie_skip:
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
.Lsie_done:
# some program checks are suppressing. C code (e.g. do_protection_exception)
# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
# Other instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
# See also .Lcleanup_sie
.Lrewind_pad6:
nopr 7
.Lrewind_pad4:
nopr 7
.Lrewind_pad2:
nopr 7
.globl sie_exit
sie_exit:
lg %r14,__SF_SIE_SAVEAREA(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
xgr %r0,%r0 # clear guest registers to
xgr %r1,%r1 # prevent speculative use
xgr %r2,%r2
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
lg %r2,__SF_SIE_REASON(%r15) # return exit reason code
BR_EX %r14
.Lsie_fault:
lghi %r14,-EFAULT
stg %r14,__SF_SIE_REASON(%r15) # set exit reason code
j sie_exit
EX_TABLE(.Lrewind_pad6,.Lsie_fault)
EX_TABLE(.Lrewind_pad4,.Lsie_fault)
EX_TABLE(.Lrewind_pad2,.Lsie_fault)
EX_TABLE(sie_exit,.Lsie_fault)
ENDPROC(sie64a)
EXPORT_SYMBOL(sie64a)
EXPORT_SYMBOL(sie_exit)
#endif
/*
* SVC interrupt handler routine. System calls are synchronous events and
* are entered with interrupts disabled.
*/
ENTRY(system_call)
stpt __LC_SYNC_ENTER_TIMER
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
BPOFF
lg %r12,__LC_CURRENT
lghi %r14,_PIF_SYSCALL
.Lsysc_per:
lghi %r13,__TASK_thread
lg %r15,__LC_KERNEL_STACK
la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs
UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
mvc __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC
stg %r14,__PT_FLAGS(%r11)
ENABLE_INTS
.Lsysc_do_svc:
# clear user controlled register to prevent speculative use
xgr %r0,%r0
# load address of system call table
lg %r10,__THREAD_sysc_table(%r13,%r12)
llgh %r8,__PT_INT_CODE+2(%r11)
slag %r8,%r8,3 # shift and test for svc 0
jnz .Lsysc_nr_ok
# svc 0: system call number in %r1
llgfr %r1,%r1 # clear high word in r1
sth %r1,__PT_INT_CODE+2(%r11)
cghi %r1,NR_syscalls
jnl .Lsysc_nr_ok
slag %r8,%r1,3
.Lsysc_nr_ok:
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
stg %r2,__PT_ORIG_GPR2(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lg %r9,0(%r8,%r10) # get system call add.
TSTMSK __TI_flags(%r12),_TIF_TRACE
jnz .Lsysc_tracesys
BASR_EX %r14,%r9 # call sys_xxxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_return:
#ifdef CONFIG_DEBUG_RSEQ
lgr %r2,%r11
brasl %r14,rseq_syscall
#endif
LOCKDEP_SYS_EXIT
.Lsysc_tif:
TSTMSK __PT_FLAGS(%r11),_PIF_WORK
jnz .Lsysc_work
TSTMSK __TI_flags(%r12),_TIF_WORK
jnz .Lsysc_work # check for work
TSTMSK __LC_CPU_FLAGS,(_CIF_WORK-_CIF_FPU)
jnz .Lsysc_work
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
.Lsysc_restore:
DISABLE_INTS
TSTMSK __LC_CPU_FLAGS, _CIF_FPU
jz .Lsysc_skip_fpu
brasl %r14,load_fpu_regs
.Lsysc_skip_fpu:
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
stpt __LC_EXIT_TIMER
lmg %r0,%r15,__PT_R0(%r11)
b __LC_RETURN_LPSWE
#
# One of the work bits is on. Find out which one.
#
.Lsysc_work:
TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jo .Lsysc_reschedule
TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL_RESTART
jo .Lsysc_syscall_restart
#ifdef CONFIG_UPROBES
TSTMSK __TI_flags(%r12),_TIF_UPROBE
jo .Lsysc_uprobe_notify
#endif
TSTMSK __TI_flags(%r12),_TIF_GUARDED_STORAGE
jo .Lsysc_guarded_storage
TSTMSK __PT_FLAGS(%r11),_PIF_PER_TRAP
jo .Lsysc_singlestep
#ifdef CONFIG_LIVEPATCH
TSTMSK __TI_flags(%r12),_TIF_PATCH_PENDING
jo .Lsysc_patch_pending # handle live patching just before
# signals and possible syscall restart
#endif
TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL_RESTART
jo .Lsysc_syscall_restart
TSTMSK __TI_flags(%r12),_TIF_SIGPENDING
jo .Lsysc_sigpending
TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME
jo .Lsysc_notify_resume
TSTMSK __LC_CPU_FLAGS,(_CIF_ASCE_PRIMARY|_CIF_ASCE_SECONDARY)
jnz .Lsysc_asce
j .Lsysc_return
#
# _TIF_NEED_RESCHED is set, call schedule
#
.Lsysc_reschedule:
larl %r14,.Lsysc_return
jg schedule
#
# _CIF_ASCE_PRIMARY and/or _CIF_ASCE_SECONDARY set, load user space asce
#
.Lsysc_asce:
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE_SECONDARY
lctlg %c7,%c7,__LC_VDSO_ASCE # load secondary asce
TSTMSK __LC_CPU_FLAGS,_CIF_ASCE_PRIMARY
jz .Lsysc_return
#ifndef CONFIG_HAVE_MARCH_Z10_FEATURES
tm __LC_STFLE_FAC_LIST+3,0x10 # has MVCOS ?
jnz .Lsysc_set_fs_fixup
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE_PRIMARY
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
j .Lsysc_return
.Lsysc_set_fs_fixup:
#endif
larl %r14,.Lsysc_return
jg set_fs_fixup
#
# _TIF_SIGPENDING is set, call do_signal
#
.Lsysc_sigpending:
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_signal
TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL
jno .Lsysc_return
.Lsysc_do_syscall:
lghi %r13,__TASK_thread
lmg %r2,%r7,__PT_R2(%r11) # load svc arguments
lghi %r1,0 # svc 0 returns -ENOSYS
j .Lsysc_do_svc
#
# _TIF_NOTIFY_RESUME is set, call do_notify_resume
#
.Lsysc_notify_resume:
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
jg do_notify_resume
#
# _TIF_UPROBE is set, call uprobe_notify_resume
#
#ifdef CONFIG_UPROBES
.Lsysc_uprobe_notify:
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
jg uprobe_notify_resume
#endif
#
# _TIF_GUARDED_STORAGE is set, call guarded_storage_load
#
.Lsysc_guarded_storage:
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
jg gs_load_bc_cb
#
# _TIF_PATCH_PENDING is set, call klp_update_patch_state
#
#ifdef CONFIG_LIVEPATCH
.Lsysc_patch_pending:
lg %r2,__LC_CURRENT # pass pointer to task struct
larl %r14,.Lsysc_return
jg klp_update_patch_state
#endif
#
# _PIF_PER_TRAP is set, call do_per_trap
#
.Lsysc_singlestep:
ni __PT_FLAGS+7(%r11),255-_PIF_PER_TRAP
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
jg do_per_trap
#
# _PIF_SYSCALL_RESTART is set, repeat the current system call
#
.Lsysc_syscall_restart:
ni __PT_FLAGS+7(%r11),255-_PIF_SYSCALL_RESTART
lmg %r1,%r7,__PT_R1(%r11) # load svc arguments
lg %r2,__PT_ORIG_GPR2(%r11)
j .Lsysc_do_svc
#
# call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
# and after the system call
#
.Lsysc_tracesys:
lgr %r2,%r11 # pass pointer to pt_regs
la %r3,0
llgh %r0,__PT_INT_CODE+2(%r11)
stg %r0,__PT_R2(%r11)
brasl %r14,do_syscall_trace_enter
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh .Lsysc_tracenogo
sllg %r8,%r2,3
lg %r9,0(%r8,%r10)
lmg %r3,%r7,__PT_R3(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lg %r2,__PT_ORIG_GPR2(%r11)
BASR_EX %r14,%r9 # call sys_xxx
stg %r2,__PT_R2(%r11) # store return value
.Lsysc_tracenogo:
TSTMSK __TI_flags(%r12),_TIF_TRACE
jz .Lsysc_return
lgr %r2,%r11 # pass pointer to pt_regs
larl %r14,.Lsysc_return
jg do_syscall_trace_exit
ENDPROC(system_call)
#
# a new process exits the kernel with ret_from_fork
#
ENTRY(ret_from_fork)
la %r11,STACK_FRAME_OVERHEAD(%r15)
lg %r12,__LC_CURRENT
brasl %r14,schedule_tail
tm __PT_PSW+1(%r11),0x01 # forking a kernel thread ?
jne .Lsysc_tracenogo
# it's a kernel thread
lmg %r9,%r10,__PT_R9(%r11) # load gprs
la %r2,0(%r10)
BASR_EX %r14,%r9
j .Lsysc_tracenogo
ENDPROC(ret_from_fork)
ENTRY(kernel_thread_starter)
la %r2,0(%r10)
BASR_EX %r14,%r9
j .Lsysc_tracenogo
ENDPROC(kernel_thread_starter)
/*
* Program check handler routine
*/
ENTRY(pgm_check_handler)
stpt __LC_SYNC_ENTER_TIMER
BPOFF
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
lg %r10,__LC_LAST_BREAK
srag %r11,%r10,12
jnz 0f
/* if __LC_LAST_BREAK is < 4096, it contains one of
* the lpswe addresses in lowcore. Set it to 1 (initial state)
* to prevent leaking that address to userspace.
*/
lghi %r10,1
0: lg %r12,__LC_CURRENT
lghi %r11,0
lmg %r8,%r9,__LC_PGM_OLD_PSW
tmhh %r8,0x0001 # test problem state bit
jnz 3f # -> fault in user space
#if IS_ENABLED(CONFIG_KVM)
# cleanup critical section for program checks in sie64a
lgr %r14,%r9
larl %r13,.Lsie_gmap
slgr %r14,%r13
lghi %r13,.Lsie_done - .Lsie_gmap
clgr %r14,%r13
jhe 1f
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
lghi %r11,_PIF_GUEST_FAULT
#endif
1: tmhh %r8,0x4000 # PER bit set in old PSW ?
jnz 2f # -> enabled, can't be a double fault
tm __LC_PGM_ILC+3,0x80 # check for per exception
jnz .Lpgm_svcper # -> single stepped svc
2: CHECK_STACK __LC_SAVE_AREA_SYNC
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
# CHECK_VMAP_STACK branches to stack_overflow or 5f
CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,5f
3: UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
lg %r15,__LC_KERNEL_STACK
lgr %r14,%r12
aghi %r14,__TASK_thread # pointer to thread_struct
lghi %r13,__LC_PGM_TDB
tm __LC_PGM_ILC+2,0x02 # check for transaction abort
jz 4f
mvc __THREAD_trap_tdb(256,%r14),0(%r13)
4: stg %r10,__THREAD_last_break(%r14)
5: lgr %r13,%r11
la %r11,STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r2,%r2
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC
mvc __PT_INT_PARM_LONG(8,%r11),__LC_TRANS_EXC_CODE
stg %r13,__PT_FLAGS(%r11)
stg %r10,__PT_ARGS(%r11)
tm __LC_PGM_ILC+3,0x80 # check for per exception
jz 6f
tmhh %r8,0x0001 # kernel per event ?
jz .Lpgm_kprobe
oi __PT_FLAGS+7(%r11),_PIF_PER_TRAP
mvc __THREAD_per_address(8,%r14),__LC_PER_ADDRESS
mvc __THREAD_per_cause(2,%r14),__LC_PER_CODE
mvc __THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID
6: RESTORE_SM_CLEAR_PER
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
larl %r1,pgm_check_table
llgh %r10,__PT_INT_CODE+2(%r11)
nill %r10,0x007f
sll %r10,3
je .Lpgm_return
lg %r9,0(%r10,%r1) # load address of handler routine
lgr %r2,%r11 # pass pointer to pt_regs
BASR_EX %r14,%r9 # branch to interrupt-handler
.Lpgm_return:
LOCKDEP_SYS_EXIT
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jno .Lsysc_restore
TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL
jo .Lsysc_do_syscall
j .Lsysc_tif
#
# PER event in supervisor state, must be kprobes
#
.Lpgm_kprobe:
RESTORE_SM_CLEAR_PER
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_per_trap
j .Lpgm_return
#
# single stepped system call
#
.Lpgm_svcper:
mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
larl %r14,.Lsysc_per
stg %r14,__LC_RETURN_PSW+8
lghi %r14,_PIF_SYSCALL | _PIF_PER_TRAP
lpswe __LC_RETURN_PSW # branch to .Lsysc_per
ENDPROC(pgm_check_handler)
/*
* IO interrupt handler routine
*/
ENTRY(io_int_handler)
STCK __LC_INT_CLOCK
stpt __LC_ASYNC_ENTER_TIMER
BPOFF
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
lg %r12,__LC_CURRENT
lmg %r8,%r9,__LC_IO_OLD_PSW
SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r2,%r2
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
jo .Lio_restore
#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
tmhh %r8,0x300
jz 1f
TRACE_IRQS_OFF
1:
#endif
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
.Lio_loop:
lgr %r2,%r11 # pass pointer to pt_regs
lghi %r3,IO_INTERRUPT
tm __PT_INT_CODE+8(%r11),0x80 # adapter interrupt ?
jz .Lio_call
lghi %r3,THIN_INTERRUPT
.Lio_call:
brasl %r14,do_IRQ
TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPAR
jz .Lio_return
tpi 0
jz .Lio_return
mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
j .Lio_loop
.Lio_return:
LOCKDEP_SYS_EXIT
TSTMSK __TI_flags(%r12),_TIF_WORK
jnz .Lio_work # there is work to do (signals etc.)
TSTMSK __LC_CPU_FLAGS,_CIF_WORK
jnz .Lio_work
.Lio_restore:
#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
tm __PT_PSW(%r11),3
jno 0f
TRACE_IRQS_ON
0:
#endif
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jno .Lio_exit_kernel
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
stpt __LC_EXIT_TIMER
.Lio_exit_kernel:
lmg %r0,%r15,__PT_R0(%r11)
b __LC_RETURN_LPSWE
.Lio_done:
#
# There is work todo, find out in which context we have been interrupted:
# 1) if we return to user space we can do all _TIF_WORK work
# 2) if we return to kernel code and kvm is enabled check if we need to
# modify the psw to leave SIE
# 3) if we return to kernel code and preemptive scheduling is enabled check
# the preemption counter and if it is zero call preempt_schedule_irq
# Before any work can be done, a switch to the kernel stack is required.
#
.Lio_work:
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jo .Lio_work_user # yes -> do resched & signal
#ifdef CONFIG_PREEMPTION
# check for preemptive scheduling
icm %r0,15,__LC_PREEMPT_COUNT
jnz .Lio_restore # preemption is disabled
TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jno .Lio_restore
# switch to kernel stack
lg %r1,__PT_R15(%r11)
aghi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
lgr %r15,%r1
brasl %r14,preempt_schedule_irq
j .Lio_return
#else
j .Lio_restore
#endif
#
# Need to do work before returning to userspace, switch to kernel stack
#
.Lio_work_user:
lg %r1,__LC_KERNEL_STACK
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
lgr %r15,%r1
#
# One of the work bits is on. Find out which one.
#
TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED
jo .Lio_reschedule
#ifdef CONFIG_LIVEPATCH
TSTMSK __TI_flags(%r12),_TIF_PATCH_PENDING
jo .Lio_patch_pending
#endif
TSTMSK __TI_flags(%r12),_TIF_SIGPENDING
jo .Lio_sigpending
TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME
jo .Lio_notify_resume
TSTMSK __TI_flags(%r12),_TIF_GUARDED_STORAGE
jo .Lio_guarded_storage
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lio_vxrs
TSTMSK __LC_CPU_FLAGS,(_CIF_ASCE_PRIMARY|_CIF_ASCE_SECONDARY)
jnz .Lio_asce
j .Lio_return
#
# _CIF_ASCE_PRIMARY and/or CIF_ASCE_SECONDARY set, load user space asce
#
.Lio_asce:
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE_SECONDARY
lctlg %c7,%c7,__LC_VDSO_ASCE # load secondary asce
TSTMSK __LC_CPU_FLAGS,_CIF_ASCE_PRIMARY
jz .Lio_return
#ifndef CONFIG_HAVE_MARCH_Z10_FEATURES
tm __LC_STFLE_FAC_LIST+3,0x10 # has MVCOS ?
jnz .Lio_set_fs_fixup
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE_PRIMARY
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
j .Lio_return
.Lio_set_fs_fixup:
#endif
larl %r14,.Lio_return
jg set_fs_fixup
#
# CIF_FPU is set, restore floating-point controls and floating-point registers.
#
.Lio_vxrs:
larl %r14,.Lio_return
jg load_fpu_regs
#
# _TIF_GUARDED_STORAGE is set, call guarded_storage_load
#
.Lio_guarded_storage:
ENABLE_INTS_TRACE
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,gs_load_bc_cb
DISABLE_INTS_TRACE
j .Lio_return
#
# _TIF_NEED_RESCHED is set, call schedule
#
.Lio_reschedule:
ENABLE_INTS_TRACE
brasl %r14,schedule # call scheduler
DISABLE_INTS_TRACE
j .Lio_return
#
# _TIF_PATCH_PENDING is set, call klp_update_patch_state
#
#ifdef CONFIG_LIVEPATCH
.Lio_patch_pending:
lg %r2,__LC_CURRENT # pass pointer to task struct
larl %r14,.Lio_return
jg klp_update_patch_state
#endif
#
# _TIF_SIGPENDING or is set, call do_signal
#
.Lio_sigpending:
ENABLE_INTS_TRACE
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_signal
DISABLE_INTS_TRACE
j .Lio_return
#
# _TIF_NOTIFY_RESUME or is set, call do_notify_resume
#
.Lio_notify_resume:
ENABLE_INTS_TRACE
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_notify_resume
DISABLE_INTS_TRACE
j .Lio_return
ENDPROC(io_int_handler)
/*
* External interrupt handler routine
*/
ENTRY(ext_int_handler)
STCK __LC_INT_CLOCK
stpt __LC_ASYNC_ENTER_TIMER
BPOFF
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
lg %r12,__LC_CURRENT
lmg %r8,%r9,__LC_EXT_OLD_PSW
SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r2,%r2
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
stmg %r8,%r9,__PT_PSW(%r11)
lghi %r1,__LC_EXT_PARAMS2
mvc __PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR
mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS
mvc __PT_INT_PARM_LONG(8,%r11),0(%r1)
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ
jo .Lio_restore
#if IS_ENABLED(CONFIG_TRACE_IRQFLAGS)
tmhh %r8,0x300
jz 1f
TRACE_IRQS_OFF
1:
#endif
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
lghi %r3,EXT_INTERRUPT
brasl %r14,do_IRQ
j .Lio_return
ENDPROC(ext_int_handler)
/*
* Load idle PSW.
*/
ENTRY(psw_idle)
stg %r3,__SF_EMPTY(%r15)
larl %r1,.Lpsw_idle_exit
stg %r1,__SF_EMPTY+8(%r15)
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz .Lpsw_idle_stcctm
.insn rsy,0xeb0000000017,%r1,5,__SF_EMPTY+16(%r15)
.Lpsw_idle_stcctm:
oi __LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
BPON
STCK __CLOCK_IDLE_ENTER(%r2)
stpt __TIMER_IDLE_ENTER(%r2)
lpswe __SF_EMPTY(%r15)
.Lpsw_idle_exit:
BR_EX %r14
ENDPROC(psw_idle)
/*
* Store floating-point controls and floating-point or vector register
* depending whether the vector facility is available. A critical section
* cleanup assures that the registers are stored even if interrupted for
* some other work. The CIF_FPU flag is set to trigger a lazy restore
* of the register contents at return from io or a system call.
*/
ENTRY(save_fpu_regs)
stnsm __SF_EMPTY(%r15),0xfc
lg %r2,__LC_CURRENT
aghi %r2,__TASK_thread
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lsave_fpu_regs_exit
stfpc __THREAD_FPU_fpc(%r2)
lg %r3,__THREAD_FPU_regs(%r2)
TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
jz .Lsave_fpu_regs_fp # no -> store FP regs
VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3)
VSTM %v16,%v31,256,%r3 # vstm 16,31,256(3)
j .Lsave_fpu_regs_done # -> set CIF_FPU flag
.Lsave_fpu_regs_fp:
std 0,0(%r3)
std 1,8(%r3)
std 2,16(%r3)
std 3,24(%r3)
std 4,32(%r3)
std 5,40(%r3)
std 6,48(%r3)
std 7,56(%r3)
std 8,64(%r3)
std 9,72(%r3)
std 10,80(%r3)
std 11,88(%r3)
std 12,96(%r3)
std 13,104(%r3)
std 14,112(%r3)
std 15,120(%r3)
.Lsave_fpu_regs_done:
oi __LC_CPU_FLAGS+7,_CIF_FPU
.Lsave_fpu_regs_exit:
ssm __SF_EMPTY(%r15)
BR_EX %r14
.Lsave_fpu_regs_end:
ENDPROC(save_fpu_regs)
EXPORT_SYMBOL(save_fpu_regs)
/*
* Load floating-point controls and floating-point or vector registers.
* A critical section cleanup assures that the register contents are
* loaded even if interrupted for some other work.
*
* There are special calling conventions to fit into sysc and io return work:
* %r15: <kernel stack>
* The function requires:
* %r4
*/
load_fpu_regs:
lg %r4,__LC_CURRENT
aghi %r4,__TASK_thread
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jno .Lload_fpu_regs_exit
lfpc __THREAD_FPU_fpc(%r4)
TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area
jz .Lload_fpu_regs_fp # -> no VX, load FP regs
VLM %v0,%v15,0,%r4
VLM %v16,%v31,256,%r4
j .Lload_fpu_regs_done
.Lload_fpu_regs_fp:
ld 0,0(%r4)
ld 1,8(%r4)
ld 2,16(%r4)
ld 3,24(%r4)
ld 4,32(%r4)
ld 5,40(%r4)
ld 6,48(%r4)
ld 7,56(%r4)
ld 8,64(%r4)
ld 9,72(%r4)
ld 10,80(%r4)
ld 11,88(%r4)
ld 12,96(%r4)
ld 13,104(%r4)
ld 14,112(%r4)
ld 15,120(%r4)
.Lload_fpu_regs_done:
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
.Lload_fpu_regs_exit:
BR_EX %r14
.Lload_fpu_regs_end:
ENDPROC(load_fpu_regs)
/*
* Machine check handler routines
*/
ENTRY(mcck_int_handler)
STCK __LC_MCCK_CLOCK
BPOFF
la %r1,4095 # validate r1
spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # validate cpu timer
sckc __LC_CLOCK_COMPARATOR # validate comparator
lam %a0,%a15,__LC_AREGS_SAVE_AREA-4095(%r1) # validate acrs
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# validate gprs
lg %r12,__LC_CURRENT
lmg %r8,%r9,__LC_MCK_OLD_PSW
TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
jo .Lmcck_panic # yes -> rest of mcck code invalid
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CR_VALID
jno .Lmcck_panic # control registers invalid -> panic
la %r14,4095
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r14) # validate ctl regs
ptlb
lg %r11,__LC_MCESAD-4095(%r14) # extended machine check save area
nill %r11,0xfc00 # MCESA_ORIGIN_MASK
TSTMSK __LC_CREGS_SAVE_AREA+16-4095(%r14),CR2_GUARDED_STORAGE
jno 0f
TSTMSK __LC_MCCK_CODE,MCCK_CODE_GS_VALID
jno 0f
.insn rxy,0xe3000000004d,0,__MCESA_GS_SAVE_AREA(%r11) # LGSC
0: l %r14,__LC_FP_CREG_SAVE_AREA-4095(%r14)
TSTMSK __LC_MCCK_CODE,MCCK_CODE_FC_VALID
jo 0f
sr %r14,%r14
0: sfpc %r14
TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX
jo 0f
lghi %r14,__LC_FPREGS_SAVE_AREA
ld %f0,0(%r14)
ld %f1,8(%r14)
ld %f2,16(%r14)
ld %f3,24(%r14)
ld %f4,32(%r14)
ld %f5,40(%r14)
ld %f6,48(%r14)
ld %f7,56(%r14)
ld %f8,64(%r14)
ld %f9,72(%r14)
ld %f10,80(%r14)
ld %f11,88(%r14)
ld %f12,96(%r14)
ld %f13,104(%r14)
ld %f14,112(%r14)
ld %f15,120(%r14)
j 1f
0: VLM %v0,%v15,0,%r11
VLM %v16,%v31,256,%r11
1: lghi %r14,__LC_CPU_TIMER_SAVE_AREA
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
jo 3f
la %r14,__LC_SYNC_ENTER_TIMER
clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER
jl 0f
la %r14,__LC_ASYNC_ENTER_TIMER
0: clc 0(8,%r14),__LC_EXIT_TIMER
jl 1f
la %r14,__LC_EXIT_TIMER
1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER
jl 2f
la %r14,__LC_LAST_UPDATE_TIMER
2: spt 0(%r14)
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
3: TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
jno .Lmcck_panic
tmhh %r8,0x0001 # interrupting from user ?
jnz 4f
TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
jno .Lmcck_panic
4: ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_MCCK_ENTER_TIMER
.Lmcck_skip:
lghi %r14,__LC_GPREGS_SAVE_AREA+64
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r2,%r2
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,s390_do_machine_check
cghi %r2,0
je .Lmcck_return
lg %r1,__LC_KERNEL_STACK # switch to kernel stack
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
lgr %r15,%r1
TRACE_IRQS_OFF
brasl %r14,s390_handle_mcck
TRACE_IRQS_ON
.Lmcck_return:
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
jno 0f
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
stpt __LC_EXIT_TIMER
0: lmg %r11,%r15,__PT_R11(%r11)
b __LC_RETURN_MCCK_LPSWE
.Lmcck_panic:
lg %r15,__LC_NODAT_STACK
la %r11,STACK_FRAME_OVERHEAD(%r15)
j .Lmcck_skip
ENDPROC(mcck_int_handler)
#
# PSW restart interrupt handler
#
ENTRY(restart_int_handler)
ALTERNATIVE "", ".insn s,0xb2800000,_LPP_OFFSET", 40
stg %r15,__LC_SAVE_AREA_RESTART
lg %r15,__LC_RESTART_STACK
xc STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
mvc STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
mvc STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW
xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
lg %r1,__LC_RESTART_FN # load fn, parm & source cpu
lg %r2,__LC_RESTART_DATA
lg %r3,__LC_RESTART_SOURCE
ltgr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
llgh %r3,__SF_EMPTY(%r15)
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
brc 2,2b
3: j 3b
ENDPROC(restart_int_handler)
.section .kprobes.text, "ax"
#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
ENTRY(stack_overflow)
lg %r15,__LC_NODAT_STACK # change to panic stack
la %r11,STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r7,__PT_R0(%r11)
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_R8(64,%r11),0(%r14)
stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
jg kernel_stack_overflow
ENDPROC(stack_overflow)
#endif
#if IS_ENABLED(CONFIG_KVM)
.Lcleanup_sie:
cghi %r11,__LC_SAVE_AREA_ASYNC #Is this in normal interrupt?
je 1f
larl %r13,.Lsie_entry
slgr %r9,%r13
larl %r13,.Lsie_skip
clgr %r9,%r13
jh 1f
oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
1: BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
lg %r9,__SF_SIE_CONTROL(%r15) # get control block pointer
ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
BR_EX %r14,%r11
#endif
.section .rodata, "a"
#define SYSCALL(esame,emu) .quad __s390x_ ## esame
.globl sys_call_table
sys_call_table:
#include "asm/syscall_table.h"
#undef SYSCALL
#ifdef CONFIG_COMPAT
#define SYSCALL(esame,emu) .quad __s390_ ## emu
.globl sys_call_table_emu
sys_call_table_emu:
#include "asm/syscall_table.h"
#undef SYSCALL
#endif