| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SMP support for J2 processor |
| * |
| * Copyright (C) 2015-2016 Smart Energy Instruments, Inc. |
| */ |
| |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <asm/cmpxchg.h> |
| |
| DEFINE_PER_CPU(unsigned, j2_ipi_messages); |
| |
| extern u32 *sh2_cpuid_addr; |
| static u32 *j2_ipi_trigger; |
| static int j2_ipi_irq; |
| |
| static irqreturn_t j2_ipi_interrupt_handler(int irq, void *arg) |
| { |
| unsigned cpu = hard_smp_processor_id(); |
| volatile unsigned *pmsg = &per_cpu(j2_ipi_messages, cpu); |
| unsigned messages, i; |
| |
| do messages = *pmsg; |
| while (cmpxchg(pmsg, messages, 0) != messages); |
| |
| if (!messages) return IRQ_NONE; |
| |
| for (i=0; i<SMP_MSG_NR; i++) |
| if (messages & (1U<<i)) |
| smp_message_recv(i); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void j2_smp_setup(void) |
| { |
| } |
| |
| static void j2_prepare_cpus(unsigned int max_cpus) |
| { |
| struct device_node *np; |
| unsigned i, max = 1; |
| |
| np = of_find_compatible_node(NULL, NULL, "jcore,ipi-controller"); |
| if (!np) |
| goto out; |
| |
| j2_ipi_irq = irq_of_parse_and_map(np, 0); |
| j2_ipi_trigger = of_iomap(np, 0); |
| if (!j2_ipi_irq || !j2_ipi_trigger) |
| goto out; |
| |
| np = of_find_compatible_node(NULL, NULL, "jcore,cpuid-mmio"); |
| if (!np) |
| goto out; |
| |
| sh2_cpuid_addr = of_iomap(np, 0); |
| if (!sh2_cpuid_addr) |
| goto out; |
| |
| if (request_irq(j2_ipi_irq, j2_ipi_interrupt_handler, IRQF_PERCPU, |
| "ipi", (void *)j2_ipi_interrupt_handler) != 0) |
| goto out; |
| |
| max = max_cpus; |
| out: |
| /* Disable any cpus past max_cpus, or all secondaries if we didn't |
| * get the necessary resources to support SMP. */ |
| for (i=max; i<NR_CPUS; i++) { |
| set_cpu_possible(i, false); |
| set_cpu_present(i, false); |
| } |
| } |
| |
| static void j2_start_cpu(unsigned int cpu, unsigned long entry_point) |
| { |
| struct device_node *np; |
| u32 regs[2]; |
| void __iomem *release, *initpc; |
| |
| if (!cpu) return; |
| |
| np = of_get_cpu_node(cpu, NULL); |
| if (!np) return; |
| |
| if (of_property_read_u32_array(np, "cpu-release-addr", regs, 2)) return; |
| release = ioremap(regs[0], sizeof(u32)); |
| initpc = ioremap(regs[1], sizeof(u32)); |
| |
| __raw_writel(entry_point, initpc); |
| __raw_writel(1, release); |
| |
| iounmap(initpc); |
| iounmap(release); |
| |
| pr_info("J2 SMP: requested start of cpu %u\n", cpu); |
| } |
| |
| static unsigned int j2_smp_processor_id(void) |
| { |
| return __raw_readl(sh2_cpuid_addr); |
| } |
| |
| static void j2_send_ipi(unsigned int cpu, unsigned int message) |
| { |
| volatile unsigned *pmsg; |
| unsigned old; |
| unsigned long val; |
| |
| /* There is only one IPI interrupt shared by all messages, so |
| * we keep a separate interrupt flag per message type in sw. */ |
| pmsg = &per_cpu(j2_ipi_messages, cpu); |
| do old = *pmsg; |
| while (cmpxchg(pmsg, old, old|(1U<<message)) != old); |
| |
| /* Generate the actual interrupt by writing to CCRn bit 28. */ |
| val = __raw_readl(j2_ipi_trigger + cpu); |
| __raw_writel(val | (1U<<28), j2_ipi_trigger + cpu); |
| } |
| |
| static struct plat_smp_ops j2_smp_ops = { |
| .smp_setup = j2_smp_setup, |
| .prepare_cpus = j2_prepare_cpus, |
| .start_cpu = j2_start_cpu, |
| .smp_processor_id = j2_smp_processor_id, |
| .send_ipi = j2_send_ipi, |
| .cpu_die = native_cpu_die, |
| .cpu_disable = native_cpu_disable, |
| .play_dead = native_play_dead, |
| }; |
| |
| CPU_METHOD_OF_DECLARE(j2_cpu_method, "jcore,spin-table", &j2_smp_ops); |