blob: f8c1d73b251d0eacda41e44772cfd04a1f596eea [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
menu "Distributed Switch Architecture drivers"
depends on NET_DSA
source "drivers/net/dsa/b53/Kconfig"
config NET_DSA_BCM_SF2
tristate "Broadcom Starfighter 2 Ethernet switch support"
depends on HAS_IOMEM
select NET_DSA_TAG_BRCM
select FIXED_PHY
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
select B53
help
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
config NET_DSA_LOOP
tristate "DSA mock-up Ethernet switch chip support"
select NET_DSA_TAG_NONE
select FIXED_PHY
help
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
source "drivers/net/dsa/hirschmann/Kconfig"
config NET_DSA_LANTIQ_GSWIP
tristate "Lantiq / Intel GSWIP"
depends on HAS_IOMEM
select NET_DSA_TAG_GSWIP
help
This enables support for the Lantiq / Intel GSWIP 2.1 found in
the xrx200 / VR9 SoC.
config NET_DSA_MT7530
tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
select NET_DSA_TAG_MTK
imply NET_DSA_MT7530_MDIO
imply NET_DSA_MT7530_MMIO
help
This enables support for the MediaTek MT7530 and MT7531 Ethernet
switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
supported as well.
config NET_DSA_MT7530_MDIO
tristate "MediaTek MT7530 MDIO interface driver"
depends on NET_DSA_MT7530
imply MEDIATEK_GE_PHY
select PCS_MTK_LYNXI
help
This enables support for the MediaTek MT7530 and MT7531 switch
chips which are connected via MDIO, as well as multi-chip
module MT7530 which can be found in the MT7621AT, MT7621DAT,
MT7621ST and MT7623AI SoCs.
config NET_DSA_MT7530_MMIO
tristate "MediaTek MT7530 MMIO interface driver"
depends on NET_DSA_MT7530
depends on HAS_IOMEM
imply MEDIATEK_GE_SOC_PHY
help
This enables support for the built-in Ethernet switch found
in the MediaTek MT7988 SoC.
The switch is a similar design as MT7531, but the switch registers
are directly mapped into the SoCs register space rather than being
accessible via MDIO.
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
select NET_DSA_TAG_TRAILER
help
This enables support for the Marvell 88E6060 ethernet switch
chip.
source "drivers/net/dsa/microchip/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
source "drivers/net/dsa/ocelot/Kconfig"
source "drivers/net/dsa/qca/Kconfig"
source "drivers/net/dsa/sja1105/Kconfig"
source "drivers/net/dsa/xrs700x/Kconfig"
source "drivers/net/dsa/realtek/Kconfig"
config NET_DSA_RZN1_A5PSW
tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
depends on OF && ARCH_RZN1
select NET_DSA_TAG_RZN1_A5PSW
select PCS_RZN1_MIIC
help
This driver supports the A5PSW switch, which is embedded in Renesas
RZ/N1 SoC.
config NET_DSA_SMSC_LAN9303
tristate
select NET_DSA_TAG_LAN9303
select REGMAP
help
This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
switch chips.
config NET_DSA_SMSC_LAN9303_I2C
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
depends on I2C
depends on VLAN_8021Q || VLAN_8021Q=n
select NET_DSA_SMSC_LAN9303
select REGMAP_I2C
help
Enable access functions if the SMSC/Microchip LAN9303 is configured
for I2C managed mode.
config NET_DSA_SMSC_LAN9303_MDIO
tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
select NET_DSA_SMSC_LAN9303
depends on VLAN_8021Q || VLAN_8021Q=n
help
Enable access functions if the Microchip LAN9303/LAN9354 is configured
for MDIO managed mode.
config NET_DSA_VITESSE_VSC73XX
tristate
select NET_DSA_TAG_NONE
select FIXED_PHY
select VITESSE_PHY
select GPIOLIB
help
This enables support for the Vitesse VSC7385, VSC7388,
VSC7395 and VSC7398 SparX integrated ethernet switches.
config NET_DSA_VITESSE_VSC73XX_SPI
tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
depends on SPI
select NET_DSA_VITESSE_VSC73XX
help
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
and VSC7398 SparX integrated ethernet switches in SPI managed mode.
config NET_DSA_VITESSE_VSC73XX_PLATFORM
tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
depends on HAS_IOMEM
select NET_DSA_VITESSE_VSC73XX
help
This enables support for the Vitesse VSC7385, VSC7388, VSC7395
and VSC7398 SparX integrated ethernet switches, connected over
a CPU-attached address bus and work in memory-mapped I/O mode.
endmenu