Google Git
Sign in
android-kvm / linux / 367b3560e10bbae3660d8ba4d0a7cc92170d8398 / . / include / soc / tegra / bpmp-abi.h
blob: 6b995a8f0f6d18d052acb9df3436cba520ccc08b [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2014-2022, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef ABI_BPMP_ABI_H
#define ABI_BPMP_ABI_H
#if defined(LK) || defined(BPMP_ABI_HAVE_STDC)
#include <stddef.h>
#include <stdint.h>
#endif
#ifndef BPMP_ABI_PACKED
#ifdef __ABI_PACKED
#define BPMP_ABI_PACKED __ABI_PACKED
#else
#define BPMP_ABI_PACKED __attribute__((packed))
#endif
#endif
#ifdef NO_GCC_EXTENSIONS
#define BPMP_ABI_EMPTY char empty;
#define BPMP_ABI_EMPTY_ARRAY 1
#else
#define BPMP_ABI_EMPTY
#define BPMP_ABI_EMPTY_ARRAY 0
#endif
#ifndef BPMP_UNION_ANON
#ifdef __UNION_ANON
#define BPMP_UNION_ANON __UNION_ANON
#else
#define BPMP_UNION_ANON
#endif
#endif
/**
* @file
*/
/**
* @defgroup MRQ MRQ Messages
* @brief Messages sent to/from BPMP via IPC
* @{
* @defgroup MRQ_Format Message Format
* @defgroup MRQ_Codes Message Request (MRQ) Codes
* @defgroup MRQ_Payloads Message Payloads
* @defgroup Error_Codes Error Codes
* @}
*/
/**
* @addtogroup MRQ_Format
* @{
* The CPU requests the BPMP to perform a particular service by
* sending it an IVC frame containing a single MRQ message. An MRQ
* message consists of a @ref mrq_request followed by a payload whose
* format depends on mrq_request::mrq.
*
* The BPMP processes the data and replies with an IVC frame (on the
* same IVC channel) containing and MRQ response. An MRQ response
* consists of a @ref mrq_response followed by a payload whose format
* depends on the associated mrq_request::mrq.
*
* A well-defined subset of the MRQ messages that the CPU sends to the
* BPMP can lead to BPMP eventually sending an MRQ message to the
* CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
* a thermal trip point, the BPMP may eventually send a single
* #MRQ_THERMAL message of its own to the CPU indicating that the trip
* point has been crossed.
* @}
*/
/**
* @ingroup MRQ_Format
* Request an answer from the peer.
* This should be set in mrq_request::flags for all requests targetted
* at BPMP. For requests originating in BPMP, this flag is optional except
* for messages targeting MCE, for which the field must be set.
* When this flag is not set, the remote peer must not send a response
* back.
*/
#define BPMP_MAIL_DO_ACK (1U << 0U)
/**
* @ingroup MRQ_Format
* Ring the sender's doorbell when responding. This should be set unless
* the sender wants to poll the underlying communications layer directly.
*
* An optional direction that can be specified in mrq_request::flags.
*/
#define BPMP_MAIL_RING_DB (1U << 1U)
/**
* @ingroup MRQ_Format
* CRC present
*/
#define BPMP_MAIL_CRC_PRESENT (1U << 2U)
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ message
*
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
* mrq_request) whose format depends on mrq.
*/
struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
/**
* @brief 32bit word containing a number of fields as follows:
*
* struct {
* uint8_t options:4;
* uint8_t xid:4;
* uint8_t payload_length;
* uint16_t crc16;
* };
*
* **options** directions to the receiver and indicates CRC presence.
*
* #BPMP_MAIL_DO_ACK and #BPMP_MAIL_RING_DB see documentation of respective options.
* #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms. It indicates the
* crc16, xid and length fields are present when set.
* Some platform configurations, especially when targeted to applications requiring
* functional safety, mandate this option being set or otherwise will respond with
* -BPMP_EBADMSG and ignore the request.
*
* **xid** is a transaction ID.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
* **payload_length** of the message expressed in bytes without the size of this header.
* See table below for minimum accepted payload lengths for each MRQ.
* Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes
* rather than bytes.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
* | MRQ | CMD | minimum payload length
* | -------------------- | ------------------------------------ | ------------------------------------------ |
* | MRQ_PING | | 4 |
* | MRQ_THREADED_PING | | 4 |
* | MRQ_RESET | any | 8 |
* | MRQ_I2C | | 12 + cmd_i2c_xfer_request.data_size |
* | MRQ_CLK | CMD_CLK_GET_RATE | 4 |
* | MRQ_CLK | CMD_CLK_SET_RATE | 16 |
* | MRQ_CLK | CMD_CLK_ROUND_RATE | 16 |
* | MRQ_CLK | CMD_CLK_GET_PARENT | 4 |
* | MRQ_CLK | CMD_CLK_SET_PARENT | 8 |
* | MRQ_CLK | CMD_CLK_ENABLE | 4 |
* | MRQ_CLK | CMD_CLK_DISABLE | 4 |
* | MRQ_CLK | CMD_CLK_IS_ENABLED | 4 |
* | MRQ_CLK | CMD_CLK_GET_ALL_INFO | 4 |
* | MRQ_CLK | CMD_CLK_GET_MAX_CLK_ID | 4 |
* | MRQ_CLK | CMD_CLK_GET_FMAX_AT_VMIN | 4 |
* | MRQ_QUERY_ABI | | 4 |
* | MRQ_PG | CMD_PG_QUERY_ABI | 12 |
* | MRQ_PG | CMD_PG_SET_STATE | 12 |
* | MRQ_PG | CMD_PG_GET_STATE | 8 |
* | MRQ_PG | CMD_PG_GET_NAME | 8 |
* | MRQ_PG | CMD_PG_GET_MAX_ID | 8 |
* | MRQ_THERMAL | CMD_THERMAL_QUERY_ABI | 8 |
* | MRQ_THERMAL | CMD_THERMAL_GET_TEMP | 8 |
* | MRQ_THERMAL | CMD_THERMAL_SET_TRIP | 20 |
* | MRQ_THERMAL | CMD_THERMAL_GET_NUM_ZONES | 4 |
* | MRQ_THERMAL | CMD_THERMAL_GET_THERMTRIP | 8 |
* | MRQ_CPU_VHINT | | 8 |
* | MRQ_ABI_RATCHET | | 2 |
* | MRQ_EMC_DVFS_LATENCY | | 8 |
* | MRQ_EMC_DVFS_EMCHUB | | 8 |
* | MRQ_EMC_DISP_RFL | | 4 |
* | MRQ_BWMGR | CMD_BWMGR_QUERY_ABI | 8 |
* | MRQ_BWMGR | CMD_BWMGR_CALC_RATE | 8 + 8 * bwmgr_rate_req.num_iso_clients |
* | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_QUERY_ABI | 8 |
* | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_CALCULATE_LA | 16 |
* | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_SET_LA | 16 |
* | MRQ_ISO_CLIENT | CMD_ISO_CLIENT_GET_MAX_BW | 8 |
* | MRQ_CPU_NDIV_LIMITS | | 4 |
* | MRQ_CPU_AUTO_CC3 | | 4 |
* | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_READ | 5 |
* | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | MRQ_RINGBUF_CONSOLE | CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* | MRQ_STRAP | STRAP_SET | 12 |
* | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | MRQ_UPHY | CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | MRQ_UPHY | CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | MRQ_UPHY | CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* | MRQ_FMON | CMD_FMON_GEAR_CLAMP | 16 |
* | MRQ_FMON | CMD_FMON_GEAR_FREE | 4 |
* | MRQ_FMON | CMD_FMON_GEAR_GET | 4 |
* | MRQ_FMON | CMD_FMON_FAULT_STS_GET | 8 |
* | MRQ_EC | CMD_EC_STATUS_EX_GET | 12 |
* | MRQ_QUERY_FW_TAG | | 0 |
* | MRQ_DEBUG | CMD_DEBUG_OPEN_RO | 4 + length of cmd_debug_fopen_request.name |
* | MRQ_DEBUG | CMD_DEBUG_OPEN_WO | 4 + length of cmd_debug_fopen_request.name |
* | MRQ_DEBUG | CMD_DEBUG_READ | 8 |
* | MRQ_DEBUG | CMD_DEBUG_WRITE | 12 + cmd_debug_fwrite_request.datalen |
* | MRQ_DEBUG | CMD_DEBUG_CLOSE | 8 |
* | MRQ_TELEMETRY | | 8 |
* | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_QUERY_ABI | 8 |
* | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_SET | 20 |
* | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_GET | 16 |
* | MRQ_PWR_LIMIT | CMD_PWR_LIMIT_CURR_CAP | 8 |
* | MRQ_GEARS | | 0 |
* | MRQ_BWMGR_INT | CMD_BWMGR_INT_QUERY_ABI | 8 |
* | MRQ_BWMGR_INT | CMD_BWMGR_INT_CALC_AND_SET | 16 |
* | MRQ_BWMGR_INT | CMD_BWMGR_INT_CAP_SET | 8 |
* | MRQ_OC_STATUS | | 0 |
*
* **crc16**
*
* CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1
* and initialization value 0x4657. The CRC is calculated over all bytes of the message
* including this header. However the crc16 field is considered to be set to 0 when
* calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set. If
* #BPMP_MAIL_CRC_PRESENT is set and this field does not match the CRC as
* calculated by BPMP, -BPMP_EBADMSG will be returned and the request will
* be ignored. See code snippet below on how to calculate the CRC.
*
* @code
* uint16_t calc_crc_digest(uint16_t crc, uint8_t *data, size_t size)
* {
* for (size_t i = 0; i < size; i++) {
* crc ^= data[i] << 8;
* for (size_t j = 0; j < 8; j++) {
* if ((crc & 0x8000) == 0x8000) {
* crc = (crc << 1) ^ 0xAC9A;
* } else {
* crc = (crc << 1);
* }
* }
* }
* return crc;
* }
*
* uint16_t calc_crc(uint8_t *data, size_t size)
* {
* return calc_crc_digest(0x4657, data, size);
* }
* @endcode
*/
uint32_t flags;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ response
*
* Provides an error code for the associated MRQ message. The
* remainder of the MRQ response is a payload (immediately following
* the mrq_response) whose format depends on the associated
* mrq_request::mrq
*/
struct mrq_response {
/** @brief Error code for the MRQ request itself */
int32_t err;
/**
* @brief 32bit word containing a number of fields as follows:
*
* struct {
* uint8_t options:4;
* uint8_t xid:4;
* uint8_t payload_length;
* uint16_t crc16;
* };
*
* **options** indicates CRC presence.
*
* #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms and
* indicates the crc16 related fields are present when set.
*
* **xid** is the transaction ID as sent by the requestor.
*
* **length** of the message expressed in bytes without the size of this header.
* Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes
* rather than bytes.
*
* **crc16**
*
* CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1
* and initialization value 0x4657. The CRC is calculated over all bytes of the message
* including this header. However the crc16 field is considered to be set to 0 when
* calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set.
*/
uint32_t flags;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Format
* Minimum needed size for an IPC message buffer
*/
#define MSG_MIN_SZ 128U
/**
* @ingroup MRQ_Format
* Minimum size guaranteed for data in an IPC message buffer
*/
#define MSG_DATA_MIN_SZ 120U
/**
* @ingroup MRQ_Codes
* @name Legal MRQ codes
* These are the legal values for mrq_request::mrq
* @{
*/
#define MRQ_PING 0U
#define MRQ_QUERY_TAG 1U
#define MRQ_THREADED_PING 9U
#define MRQ_DEBUGFS 19U
#define MRQ_RESET 20U
#define MRQ_I2C 21U
#define MRQ_CLK 22U
#define MRQ_QUERY_ABI 23U
#define MRQ_THERMAL 27U
#define MRQ_CPU_VHINT 28U
#define MRQ_ABI_RATCHET 29U
#define MRQ_EMC_DVFS_LATENCY 31U
#define MRQ_RINGBUF_CONSOLE 65U
#define MRQ_PG 66U
#define MRQ_CPU_NDIV_LIMITS 67U
#define MRQ_STRAP 68U
#define MRQ_UPHY 69U
#define MRQ_CPU_AUTO_CC3 70U
#define MRQ_QUERY_FW_TAG 71U
#define MRQ_FMON 72U
#define MRQ_EC 73U
#define MRQ_DEBUG 75U
#define MRQ_EMC_DVFS_EMCHUB 76U
#define MRQ_BWMGR 77U
#define MRQ_ISO_CLIENT 78U
#define MRQ_EMC_DISP_RFL 79U
#define MRQ_TELEMETRY 80U
#define MRQ_PWR_LIMIT 81U
#define MRQ_GEARS 82U
#define MRQ_BWMGR_INT 83U
#define MRQ_OC_STATUS 84U
/** @cond DEPRECATED */
#define MRQ_RESERVED_2 2U
#define MRQ_RESERVED_3 3U
#define MRQ_RESERVED_4 4U
#define MRQ_RESERVED_5 5U
#define MRQ_RESERVED_6 6U
#define MRQ_RESERVED_7 7U
#define MRQ_RESERVED_8 8U
#define MRQ_RESERVED_10 10U
#define MRQ_RESERVED_11 11U
#define MRQ_RESERVED_12 12U
#define MRQ_RESERVED_13 13U
#define MRQ_RESERVED_14 14U
#define MRQ_RESERVED_15 15U
#define MRQ_RESERVED_16 16U
#define MRQ_RESERVED_17 17U
#define MRQ_RESERVED_18 18U
#define MRQ_RESERVED_24 24U
#define MRQ_RESERVED_25 25U
#define MRQ_RESERVED_26 26U
#define MRQ_RESERVED_30 30U
#define MRQ_RESERVED_64 64U
#define MRQ_RESERVED_74 74U
/** @endcond DEPRECATED */
/** @} */
/**
* @ingroup MRQ_Codes
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
#define MAX_CPU_MRQ_ID 84U
/**
* @addtogroup MRQ_Payloads
* @{
* @defgroup Ping Ping
* @defgroup Query_Tag Query Tag
* @defgroup Module Loadable Modules
* @defgroup Trace Trace
* @defgroup Debugfs Debug File System
* @defgroup Reset Reset
* @defgroup I2C I2C
* @defgroup Clocks Clocks
* @defgroup ABI_info ABI Info
* @defgroup Powergating Power Gating
* @defgroup Thermal Thermal
* @defgroup OC_status OC status
* @defgroup Vhint CPU Voltage hint
* @defgroup EMC EMC
* @defgroup BWMGR BWMGR
* @defgroup ISO_CLIENT ISO_CLIENT
* @defgroup CPU NDIV Limits
* @defgroup RingbufConsole Ring Buffer Console
* @defgroup Strap Straps
* @defgroup UPHY UPHY
* @defgroup CC3 Auto-CC3
* @defgroup FMON FMON
* @defgroup EC EC
* @defgroup Telemetry Telemetry
* @defgroup Pwrlimit PWR_LIMIT
* @defgroup Gears Gears
* @defgroup BWMGR_INT Bandwidth Manager Integrated
* @} MRQ_Payloads
*/
/**
* @ingroup MRQ_Codes
* @def MRQ_PING
* @brief A simple ping
*
* * Platforms: All
* * Initiators: Any
* * Targets: Any
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* @ingroup MRQ_Codes
* @def MRQ_THREADED_PING
* @brief A deeper ping
*
* * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* Behavior is equivalent to a simple #MRQ_PING except that BPMP
* responds from a thread context (providing a slightly more robust
* sign of life).
*
*/
/**
* @ingroup Ping
* @brief Request with #MRQ_PING
*
* Used by the sender of an #MRQ_PING message to request a pong from
* recipient. The response from the recipient is computed based on
* #challenge.
*/
struct mrq_ping_request {
/** @brief Arbitrarily chosen value */
uint32_t challenge;
} BPMP_ABI_PACKED;
/**
* @ingroup Ping
* @brief Response to #MRQ_PING
*
* Sent in response to an #MRQ_PING message. #reply should be the
* mrq_ping_request challenge left shifted by 1 with the carry-bit
* dropped.
*
*/
struct mrq_ping_response {
/** @brief Response to the MRQ_PING challege */
uint32_t reply;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifer)
*
* @deprecated Use #MRQ_QUERY_FW_TAG instead.
*
* * Platforms: All
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_query_tag_request
* * Response Payload: N/A
*
*/
/**
* @ingroup Query_Tag
* @brief Request with #MRQ_QUERY_TAG
*
* @deprecated This structure will be removed in future version.
* Use MRQ_QUERY_FW_TAG instead.
*/
struct mrq_query_tag_request {
/** @brief Base address to store the firmware tag */
uint32_t addr;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_FW_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifier)
*
* * Platforms: All
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_query_fw_tag_response
*
*/
/**
* @ingroup Query_Tag
* @brief Response to #MRQ_QUERY_FW_TAG
*
* Sent in response to #MRQ_QUERY_FW_TAG message. #tag contains the unique
* identifier for the version of firmware issuing the reply.
*
*/
struct mrq_query_fw_tag_response {
/** @brief Array to store tag information */
uint8_t tag[32];
} BPMP_ABI_PACKED;
/** @private */
struct mrq_threaded_ping_request {
uint32_t challenge;
} BPMP_ABI_PACKED;
/** @private */
struct mrq_threaded_ping_response {
uint32_t reply;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUGFS
* @brief Interact with BPMP's debugfs file nodes
*
* @deprecated use MRQ_DEBUG instead.
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debugfs_request
* * Response Payload: @ref mrq_debugfs_response
*/
/**
* @addtogroup Debugfs
* @{
*
* The BPMP firmware implements a pseudo-filesystem called
* debugfs. Any driver within the firmware may register with debugfs
* to expose an arbitrary set of "files" in the filesystem. When
* software on the CPU writes to a debugfs file, debugfs passes the
* written data to a callback provided by the driver. When software on
* the CPU reads a debugfs file, debugfs queries the driver for the
* data to return to the CPU. The intention of the debugfs filesystem
* is to provide information useful for debugging the system at
* runtime.
*
* @note The files exposed via debugfs are not part of the
* BPMP firmware's ABI. debugfs files may be added or removed in any
* given version of the firmware. Typically the semantics of a debugfs
* file are consistent from version to version but even that is not
* guaranteed.
*
* @}
*/
/** @ingroup Debugfs */
enum mrq_debugfs_commands {
/** @brief Perform read */
CMD_DEBUGFS_READ = 1,
/** @brief Perform write */
CMD_DEBUGFS_WRITE = 2,
/** @brief Perform dumping directory */
CMD_DEBUGFS_DUMPDIR = 3,
/** @brief Not a command */
CMD_DEBUGFS_MAX
};
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_request {
/** @brief Physical address pointing at filename */
uint32_t fnameaddr;
/** @brief Length in bytes of filename buffer */
uint32_t fnamelen;
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_dumpdir_request {
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_DUMPDIR command
*/
struct cmd_debugfs_dumpdir_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUGFS.
*
* The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
* mrq_debugfs_commands. Each command requires a specific additional
* payload of data.
*
* |command |payload|
* |-------------------|-------|
* |CMD_DEBUGFS_READ |fop |
* |CMD_DEBUGFS_WRITE |fop |
* |CMD_DEBUGFS_DUMPDIR|dumpdir|
*/
struct mrq_debugfs_request {
/** @brief Sub-command (@ref mrq_debugfs_commands) */
uint32_t cmd;
union {
struct cmd_debugfs_fileop_request fop;
struct cmd_debugfs_dumpdir_request dumpdir;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
*/
struct mrq_debugfs_response {
/** @brief Always 0 */
int32_t reserved;
union {
/** @brief Response data for CMD_DEBUGFS_READ OR
* CMD_DEBUGFS_WRITE command
*/
struct cmd_debugfs_fileop_response fop;
/** @brief Response data for CMD_DEBUGFS_DUMPDIR command */
struct cmd_debugfs_dumpdir_response dumpdir;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @addtogroup Debugfs
* @{
*/
#define DEBUGFS_S_ISDIR (1 << 9)
#define DEBUGFS_S_IRUSR (1 << 8)
#define DEBUGFS_S_IWUSR (1 << 7)
/** @} Debugfs */
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUG
* @brief Interact with BPMP's debugfs file nodes. Use message payload
* for exchanging data. This is functionally equivalent to
* @ref MRQ_DEBUGFS. But the way in which data is exchanged is different.
* When software running on CPU tries to read a debugfs file,
* the file path and read data will be stored in message payload.
* Since the message payload size is limited, a debugfs file
* transaction might require multiple frames of data exchanged
* between BPMP and CPU until the transaction completes.
*
* * Platforms: T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debug_request
* * Response Payload: @ref mrq_debug_response
*/
/** @ingroup Debugfs */
enum mrq_debug_commands {
/** @brief Open required file for read operation */
CMD_DEBUG_OPEN_RO = 0,
/** @brief Open required file for write operation */
CMD_DEBUG_OPEN_WO = 1,
/** @brief Perform read */
CMD_DEBUG_READ = 2,
/** @brief Perform write */
CMD_DEBUG_WRITE = 3,
/** @brief Close file */
CMD_DEBUG_CLOSE = 4,
/** @brief Not a command */
CMD_DEBUG_MAX
};
/**
* @ingroup Debugfs
* @brief Maximum number of files that can be open at a given time
*/
#define DEBUG_MAX_OPEN_FILES 1
/**
* @ingroup Debugfs
* @brief Maximum size of null-terminated file name string in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fopen_request
* Value 4 corresponds to size of @ref mrq_debug_commands
* in @ref mrq_debug_request.
* 120 - 4 dbg_cmd(32bit) = 116
*/
#define DEBUG_FNAME_MAX_SZ (MSG_DATA_MIN_SZ - 4)
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUG_OPEN command
*/
struct cmd_debug_fopen_request {
/** @brief File name - Null-terminated string with maximum
* length @ref DEBUG_FNAME_MAX_SZ
*/
char name[DEBUG_FNAME_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUG_OPEN_RO/WO command
*/
struct cmd_debug_fopen_response {
/** @brief Identifier for file access */
uint32_t fd;
/** @brief Data length. File data size for READ command.
* Maximum allowed length for WRITE command
*/
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUG_READ command
*/
struct cmd_debug_fread_request {
/** @brief File access identifier received in response
* to CMD_DEBUG_OPEN_RO request
*/
uint32_t fd;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Maximum size of read data in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fread_response.
*/
#define DEBUG_READ_MAX_SZ (MSG_DATA_MIN_SZ - 4)
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUG_READ command
*/
struct cmd_debug_fread_response {
/** @brief Size of data provided in this response in bytes */
uint32_t readlen;
/** @brief File data from seek position */
char data[DEBUG_READ_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Maximum size of write data in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fwrite_request.
*/
#define DEBUG_WRITE_MAX_SZ (MSG_DATA_MIN_SZ - 12)
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUG_WRITE command
*/
struct cmd_debug_fwrite_request {
/** @brief File access identifier received in response
* to CMD_DEBUG_OPEN_RO request
*/
uint32_t fd;
/** @brief Size of write data in bytes */
uint32_t datalen;
/** @brief Data to be written */
char data[DEBUG_WRITE_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUG_CLOSE command
*/
struct cmd_debug_fclose_request {
/** @brief File access identifier received in response
* to CMD_DEBUG_OPEN_RO request
*/
uint32_t fd;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUG.
*
* The sender of an MRQ_DEBUG message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
* mrq_debug_commands. Each command requires a specific additional
* payload of data.
*
* |command |payload|
* |-------------------|-------|
* |CMD_DEBUG_OPEN_RO |fop |
* |CMD_DEBUG_OPEN_WO |fop |
* |CMD_DEBUG_READ |frd |
* |CMD_DEBUG_WRITE |fwr |
* |CMD_DEBUG_CLOSE |fcl |
*/
struct mrq_debug_request {
/** @brief Sub-command (@ref mrq_debug_commands) */
uint32_t cmd;
union {
/** @brief Request payload for CMD_DEBUG_OPEN_RO/WO command */
struct cmd_debug_fopen_request fop;
/** @brief Request payload for CMD_DEBUG_READ command */
struct cmd_debug_fread_request frd;
/** @brief Request payload for CMD_DEBUG_WRITE command */
struct cmd_debug_fwrite_request fwr;
/** @brief Request payload for CMD_DEBUG_CLOSE command */
struct cmd_debug_fclose_request fcl;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
*/
struct mrq_debug_response {
union {
/** @brief Response data for CMD_DEBUG_OPEN_RO/WO command */
struct cmd_debug_fopen_response fop;
/** @brief Response data for CMD_DEBUG_READ command */
struct cmd_debug_fread_response frd;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_RESET
* @brief Reset an IP block
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
* * Response Payload: @ref mrq_reset_response
*
* @addtogroup Reset
* @{
*/
enum mrq_reset_commands {
/**
* @brief Assert module reset
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
* -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
* -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_ASSERT = 1,
/**
* @brief Deassert module reset
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
* -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
* -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_DEASSERT = 2,
/**
* @brief Assert and deassert the module reset
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid @n
* -#BPMP_EACCES if mrq master is not an owner of target domain reset @n
* -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_MODULE = 3,
/**
* @brief Get the highest reset ID
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if no reset domains are supported (number of IDs is 0)
*/
CMD_RESET_GET_MAX_ID = 4,
/** @brief Not part of ABI and subject to change */
CMD_RESET_MAX,
};
/**
* @brief Request with MRQ_RESET
*
* Used by the sender of an #MRQ_RESET message to request BPMP to
* assert or or deassert a given reset line.
*/
struct mrq_reset_request {
/** @brief Reset action to perform (@ref mrq_reset_commands) */
uint32_t cmd;
/** @brief Id of the reset to affected */
uint32_t reset_id;
} BPMP_ABI_PACKED;
/**
* @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
* this sub-command is not supported, firmware will return -BPMP_EBADCMD
* in mrq_response::err.
*/
struct cmd_reset_get_max_id_response {
/** @brief Max reset id */
uint32_t max_id;
} BPMP_ABI_PACKED;
/**
* @brief Response with MRQ_RESET
*
* Each sub-command supported by @ref mrq_reset_request may return
* sub-command-specific data. Some do and some do not as indicated
* in the following table
*
* | sub-command | payload |
* |----------------------|------------------|
* | CMD_RESET_ASSERT | - |
* | CMD_RESET_DEASSERT | - |
* | CMD_RESET_MODULE | - |
* | CMD_RESET_GET_MAX_ID | reset_get_max_id |
*/
struct mrq_reset_response {
union {
struct cmd_reset_get_max_id_response reset_get_max_id;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Reset */
/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
* @brief Issue an i2c transaction
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_i2c_request
* * Response Payload: @ref mrq_i2c_response
*
* @addtogroup I2C
* @{
*/
#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12U)
#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4U)
#define SERIALI2C_TEN 0x0010U
#define SERIALI2C_RD 0x0001U
#define SERIALI2C_STOP 0x8000U
#define SERIALI2C_NOSTART 0x4000U
#define SERIALI2C_REV_DIR_ADDR 0x2000U
#define SERIALI2C_IGNORE_NAK 0x1000U
#define SERIALI2C_NO_RD_ACK 0x0800U
#define SERIALI2C_RECV_LEN 0x0400U
enum {
CMD_I2C_XFER = 1
};
/**
* @brief Serializable i2c request
*
* Instances of this structure are packed (little-endian) into
* cmd_i2c_xfer_request::data_buf. Each instance represents a single
* transaction (or a portion of a transaction with repeated starts) on
* an i2c bus.
*
* Because these structures are packed, some instances are likely to
* be misaligned. Additionally because #data is variable length, it is
* not possible to iterate through a serialized list of these
* structures without inspecting #len in each instance. It may be
* easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
* manually rather than using this structure definition.
*/
struct serial_i2c_request {
/** @brief I2C slave address */
uint16_t addr;
/** @brief Bitmask of SERIALI2C_ flags */
uint16_t flags;
/** @brief Length of I2C transaction in bytes */
uint16_t len;
/** @brief For write transactions only, #len bytes of data */
uint8_t data[];
} BPMP_ABI_PACKED;
/**
* @brief Trigger one or more i2c transactions
*/
struct cmd_i2c_xfer_request {
/**
* @brief Tegra PWR_I2C bus identifier
*
* @cond (bpmp_t234 || bpmp_t239 || bpmp_t194)
* Must be set to 5.
* @endcond (bpmp_t234 || bpmp_t239 || bpmp_t194)
* @cond bpmp_th500
* Must be set to 1.
* @endcond bpmp_th500
*
*/
uint32_t bus_id;
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief Serialized packed instances of @ref serial_i2c_request*/
uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Container for data read from the i2c bus
*
* Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
* zero or more I2C reads. The data read from the bus is serialized
* into #data_buf.
*/
struct cmd_i2c_xfer_response {
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief I2c read data */
uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_I2C
*/
struct mrq_i2c_request {
/** @brief Always CMD_I2C_XFER (i.e. 1) */
uint32_t cmd;
/** @brief Parameters of the transfer request */
struct cmd_i2c_xfer_request xfer;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_I2C
*
* mrq_response:err is
* 0: Success
* -#BPMP_EBADCMD: if mrq_i2c_request::cmd is other than 1
* -#BPMP_EINVAL: if cmd_i2c_xfer_request does not contain correctly formatted request
* -#BPMP_ENODEV: if cmd_i2c_xfer_request::bus_id is not supported by BPMP
* -#BPMP_EACCES: if i2c transaction is not allowed due to firewall rules
* -#BPMP_ETIMEDOUT: if i2c transaction times out
* -#BPMP_ENXIO: if i2c slave device does not reply with ACK to the transaction
* -#BPMP_EAGAIN: if ARB_LOST condition is detected by the i2c controller
* -#BPMP_EIO: any other i2c controller error code than NO_ACK or ARB_LOST
*/
struct mrq_i2c_response {
struct cmd_i2c_xfer_response xfer;
} BPMP_ABI_PACKED;
/** @} I2C */
/**
* @ingroup MRQ_Codes
* @def MRQ_CLK
* @brief Perform a clock operation
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_clk_request
* * Response Payload: @ref mrq_clk_response
*
* @addtogroup Clocks
* @{
*/
enum {
CMD_CLK_GET_RATE = 1,
CMD_CLK_SET_RATE = 2,
CMD_CLK_ROUND_RATE = 3,
CMD_CLK_GET_PARENT = 4,
CMD_CLK_SET_PARENT = 5,
CMD_CLK_IS_ENABLED = 6,
CMD_CLK_ENABLE = 7,
CMD_CLK_DISABLE = 8,
/** @cond DEPRECATED */
CMD_CLK_PROPERTIES = 9,
CMD_CLK_POSSIBLE_PARENTS = 10,
CMD_CLK_NUM_POSSIBLE_PARENTS = 11,
CMD_CLK_GET_POSSIBLE_PARENT = 12,
CMD_CLK_RESET_REFCOUNTS = 13,
/** @endcond DEPRECATED */
CMD_CLK_GET_ALL_INFO = 14,
CMD_CLK_GET_MAX_CLK_ID = 15,
CMD_CLK_GET_FMAX_AT_VMIN = 16,
CMD_CLK_MAX,
};
#define BPMP_CLK_HAS_MUX (1U << 0U)
#define BPMP_CLK_HAS_SET_RATE (1U << 1U)
#define BPMP_CLK_IS_ROOT (1U << 2U)
#define BPMP_CLK_IS_VAR_ROOT (1U << 3U)
/**
* @brief Protection against rate and parent changes
*
* #MRQ_CLK command #CMD_CLK_SET_RATE or #MRQ_CLK command #CMD_CLK_SET_PARENT will return
* -#BPMP_EACCES.
*/
#define BPMP_CLK_RATE_PARENT_CHANGE_DENIED (1U << 30)
/**
* @brief Protection against state changes
*
* #MRQ_CLK command #CMD_CLK_ENABLE or #MRQ_CLK command #CMD_CLK_DISABLE will return
* -#BPMP_EACCES.
*/
#define BPMP_CLK_STATE_CHANGE_DENIED (1U << 31)
#define MRQ_CLK_NAME_MAXLEN 40U
#define MRQ_CLK_MAX_PARENTS 16U
/** @private */
struct cmd_clk_get_rate_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_get_rate_response {
int64_t rate;
} BPMP_ABI_PACKED;
struct cmd_clk_set_rate_request {
int32_t unused;
int64_t rate;
} BPMP_ABI_PACKED;
struct cmd_clk_set_rate_response {
int64_t rate;
} BPMP_ABI_PACKED;
struct cmd_clk_round_rate_request {
int32_t unused;
int64_t rate;
} BPMP_ABI_PACKED;
struct cmd_clk_round_rate_response {
int64_t rate;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_get_parent_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_get_parent_response {
uint32_t parent_id;
} BPMP_ABI_PACKED;
struct cmd_clk_set_parent_request {
uint32_t parent_id;
} BPMP_ABI_PACKED;
struct cmd_clk_set_parent_response {
uint32_t parent_id;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_is_enabled_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response data to #MRQ_CLK sub-command CMD_CLK_IS_ENABLED
*/
struct cmd_clk_is_enabled_response {
/**
* @brief The state of the clock that has been successfully
* requested with CMD_CLK_ENABLE or CMD_CLK_DISABLE by the
* master invoking the command earlier.
*
* The state may not reflect the physical state of the clock
* if there are some other masters requesting it to be
* enabled.
*
* Value 0 is disabled, all other values indicate enabled.
*/
int32_t state;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_enable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_enable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_disable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_disable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @cond DEPRECATED */
/** @private */
struct cmd_clk_properties_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @todo flags need to be spelled out here */
struct cmd_clk_properties_response {
uint32_t flags;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_possible_parents_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_possible_parents_response {
uint8_t num_parents;
uint8_t reserved[3];
uint32_t parent_id[MRQ_CLK_MAX_PARENTS];
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_num_possible_parents_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_num_possible_parents_response {
uint8_t num_parents;
} BPMP_ABI_PACKED;
struct cmd_clk_get_possible_parent_request {
uint8_t parent_idx;
} BPMP_ABI_PACKED;
struct cmd_clk_get_possible_parent_response {
uint32_t parent_id;
} BPMP_ABI_PACKED;
/** @endcond DEPRECATED */
/** @private */
struct cmd_clk_get_all_info_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_get_all_info_response {
uint32_t flags;
uint32_t parent;
uint32_t parents[MRQ_CLK_MAX_PARENTS];
uint8_t num_parents;
uint8_t name[MRQ_CLK_NAME_MAXLEN];
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_get_max_clk_id_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_get_max_clk_id_response {
uint32_t max_id;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_clk_get_fmax_at_vmin_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_clk_get_fmax_at_vmin_response {
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @ingroup Clocks
* @brief Request with #MRQ_CLK
*
* Used by the sender of an #MRQ_CLK message to control clocks. The
* clk_request is split into several sub-commands. Some sub-commands
* require no additional data. Others have a sub-command specific
* payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_CLK_GET_RATE |- |
* |CMD_CLK_SET_RATE |clk_set_rate |
* |CMD_CLK_ROUND_RATE |clk_round_rate |
* |CMD_CLK_GET_PARENT |- |
* |CMD_CLK_SET_PARENT |clk_set_parent |
* |CMD_CLK_IS_ENABLED |- |
* |CMD_CLK_ENABLE |- |
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |- |
* |CMD_CLK_GET_MAX_CLK_ID |- |
* |CMD_CLK_GET_FMAX_AT_VMIN |-
* |
*
*/
/** @cond DEPRECATED
*
* Older versions of firmware also supported following sub-commands:
* |CMD_CLK_PROPERTIES |- |
* |CMD_CLK_POSSIBLE_PARENTS |- |
* |CMD_CLK_NUM_POSSIBLE_PARENTS|- |
* |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parent|
* |CMD_CLK_RESET_REFCOUNTS |- |
*
* @endcond DEPRECATED */
struct mrq_clk_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
* - bits[31..24] is the sub-cmd.
* - bits[23..0] is the clock id
*/
uint32_t cmd_and_id;
union {
/** @private */
struct cmd_clk_get_rate_request clk_get_rate;
struct cmd_clk_set_rate_request clk_set_rate;
struct cmd_clk_round_rate_request clk_round_rate;
/** @private */
struct cmd_clk_get_parent_request clk_get_parent;
struct cmd_clk_set_parent_request clk_set_parent;
/** @private */
struct cmd_clk_enable_request clk_enable;
/** @private */
struct cmd_clk_disable_request clk_disable;
/** @private */
struct cmd_clk_is_enabled_request clk_is_enabled;
/** @cond DEPRECATED */
/** @private */
struct cmd_clk_properties_request clk_properties;
/** @private */
struct cmd_clk_possible_parents_request clk_possible_parents;
/** @private */
struct cmd_clk_num_possible_parents_request clk_num_possible_parents;
struct cmd_clk_get_possible_parent_request clk_get_possible_parent;
/** @endcond DEPRECATED */
/** @private */
struct cmd_clk_get_all_info_request clk_get_all_info;
/** @private */
struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
/** @private */
struct cmd_clk_get_fmax_at_vmin_request clk_get_fmax_at_vmin;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Clocks
* @brief Response to MRQ_CLK
*
* Each sub-command supported by @ref mrq_clk_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |CMD_CLK_GET_RATE |clk_get_rate |
* |CMD_CLK_SET_RATE |clk_set_rate |
* |CMD_CLK_ROUND_RATE |clk_round_rate |
* |CMD_CLK_GET_PARENT |clk_get_parent |
* |CMD_CLK_SET_PARENT |clk_set_parent |
* |CMD_CLK_IS_ENABLED |clk_is_enabled |
* |CMD_CLK_ENABLE |- |
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
* |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
* |CMD_CLK_GET_FMAX_AT_VMIN |clk_get_fmax_at_vmin |
*
*/
/** @cond DEPRECATED
*
* Older versions of firmware also supported following sub-commands:
* |CMD_CLK_PROPERTIES |clk_properties |
* |CMD_CLK_POSSIBLE_PARENTS |clk_possible_parents |
* |CMD_CLK_NUM_POSSIBLE_PARENTS|clk_num_possible_parents|
* |CMD_CLK_GET_POSSIBLE_PARENT |clk_get_possible_parents|
* |CMD_CLK_RESET_REFCOUNTS |- |
*
* @endcond DEPRECATED */
struct mrq_clk_response {
union {
struct cmd_clk_get_rate_response clk_get_rate;
struct cmd_clk_set_rate_response clk_set_rate;
struct cmd_clk_round_rate_response clk_round_rate;
struct cmd_clk_get_parent_response clk_get_parent;
struct cmd_clk_set_parent_response clk_set_parent;
/** @private */
struct cmd_clk_enable_response clk_enable;
/** @private */
struct cmd_clk_disable_response clk_disable;
struct cmd_clk_is_enabled_response clk_is_enabled;
/** @cond DEPRECATED */
struct cmd_clk_properties_response clk_properties;
struct cmd_clk_possible_parents_response clk_possible_parents;
struct cmd_clk_num_possible_parents_response clk_num_possible_parents;
struct cmd_clk_get_possible_parent_response clk_get_possible_parent;
/** @endcond DEPRECATED */
struct cmd_clk_get_all_info_response clk_get_all_info;
struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Clocks */
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_ABI
* @brief Check if an MRQ is implemented
*
* * Platforms: All
* * Initiators: Any
* * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
* * Response Payload: @ref mrq_query_abi_response
*/
/**
* @ingroup ABI_info
* @brief Request with MRQ_QUERY_ABI
*
* Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
* by the recipient.
*/
struct mrq_query_abi_request {
/** @brief MRQ code to query */
uint32_t mrq;
} BPMP_ABI_PACKED;
/**
* @ingroup ABI_info
* @brief Response to MRQ_QUERY_ABI
*
* @note mrq_response::err of 0 indicates that the query was
* successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
int32_t status;
} BPMP_ABI_PACKED;
/**
*
* @ingroup MRQ_Codes
* @def MRQ_PG
* @brief Control power-gating state of a partition. In contrast to
* MRQ_PG_UPDATE_STATE, operations that change the power partition
* state are NOT reference counted
*
* @cond (bpmp_t194 || bpmp_t186)
* @note On T194 and earlier BPMP-FW forcefully turns off some partitions as
* part of SC7 entry because their state cannot be adequately restored on exit.
* Therefore, it is recommended to power off all domains via MRQ_PG prior to SC7
* entry.
* See @ref bpmp_pdomain_ids for further detail.
* @endcond (bpmp_t194 || bpmp_t186)
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
* * Response Payload: @ref mrq_pg_response
*
* @addtogroup Powergating
* @{
*/
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PG_QUERY_ABI = 0,
/**
* @brief Set the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_SET_STATE = 1,
/**
* @brief Get the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_STATE = 2,
/**
* @brief Get the name string of specified power domain id.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_NAME = 3,
/**
* @brief Get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
* mrq_response:err is
* 0: Success
* -#BPMP_EINVAL: Invalid request parameters
*/
CMD_PG_GET_MAX_ID = 4,
};
#define MRQ_PG_NAME_MAXLEN 40
enum pg_states {
/** @brief Power domain is OFF */
PG_STATE_OFF = 0,
/** @brief Power domain is ON */
PG_STATE_ON = 1,
/**
* @brief a legacy state where power domain and the clock
* associated to the domain are ON.
* This state is only supported in T186, and the use of it is
* deprecated.
*/
PG_STATE_RUNNING = 2,
};
struct cmd_pg_query_abi_request {
/** @ref mrq_pg_cmd */
uint32_t type;
} BPMP_ABI_PACKED;
struct cmd_pg_set_state_request {
/** @ref pg_states */
uint32_t state;
} BPMP_ABI_PACKED;
/**
* @brief Response data to #MRQ_PG sub command #CMD_PG_GET_STATE
*/
struct cmd_pg_get_state_response {
/**
* @brief The state of the power partition that has been
* succesfuly requested by the master earlier using #MRQ_PG
* command #CMD_PG_SET_STATE.
*
* The state may not reflect the physical state of the power
* partition if there are some other masters requesting it to
* be enabled.
*
* See @ref pg_states for possible values
*/
uint32_t state;
} BPMP_ABI_PACKED;
struct cmd_pg_get_name_response {
uint8_t name[MRQ_PG_NAME_MAXLEN];
} BPMP_ABI_PACKED;
struct cmd_pg_get_max_id_response {
uint32_t max_id;
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
* partitions. The pg_request is split into several sub-commands. Some
* sub-commands require no additional data. Others have a sub-command
* specific payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | query_abi |
* |CMD_PG_SET_STATE | set_state |
* |CMD_PG_GET_STATE | - |
* |CMD_PG_GET_NAME | - |
* |CMD_PG_GET_MAX_ID | - |
*
*/
struct mrq_pg_request {
uint32_t cmd;
uint32_t id;
union {
struct cmd_pg_query_abi_request query_abi;
struct cmd_pg_set_state_request set_state;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response to MRQ_PG
*
* Each sub-command supported by @ref mrq_pg_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_PG_QUERY_ABI | - |
* |CMD_PG_SET_STATE | - |
* |CMD_PG_GET_STATE | get_state |
* |CMD_PG_GET_NAME | get_name |
* |CMD_PG_GET_MAX_ID | get_max_id |
*/
struct mrq_pg_response {
union {
struct cmd_pg_get_state_response get_state;
struct cmd_pg_get_name_response get_name;
struct cmd_pg_get_max_id_response get_max_id;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Powergating */
/**
* @ingroup MRQ_Codes
* @def MRQ_THERMAL
* @brief Interact with BPMP thermal framework
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: Any
* * Request Payload: TODO
* * Response Payload: TODO
*
* @addtogroup Thermal
*
* The BPMP firmware includes a thermal framework. Drivers within the
* bpmp firmware register with the framework to provide thermal
* zones. Each thermal zone corresponds to an entity whose temperature
* can be measured. The framework also has a notion of trip points. A
* trip point consists of a thermal zone id, a temperature, and a
* callback routine. The framework invokes the callback when the zone
* hits the indicated temperature. The BPMP firmware uses this thermal
* framework interally to implement various temperature-dependent
* functions.
*
* Software on the CPU can use #MRQ_THERMAL (with payload @ref
* mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
* framework. The CPU must It can query the number of supported zones,
* query zone temperatures, and set trip points.
*
* When a trip point set by the CPU gets crossed, BPMP firmware issues
* an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
* payload of @ref mrq_thermal_bpmp_to_host_request.
* @{
*/
enum mrq_thermal_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type.
*
* Host needs to supply request parameters.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_THERMAL_QUERY_ABI = 0,
/**
* @brief Get the current temperature of the specified zone.
*
* Host needs to supply request parameters.
*
* mrq_response::err is
* * 0: Temperature query succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOENT: No driver registered for thermal zone..
* * -#BPMP_EFAULT: Problem reading temperature measurement.
*/
CMD_THERMAL_GET_TEMP = 1,
/**
* @brief Enable or disable and set the lower and upper
* thermal limits for a thermal trip point. Each zone has
* one trip point.
*
* Host needs to supply request parameters. Once the
* temperature hits a trip point, the BPMP will send a message
* to the CPU having MRQ=MRQ_THERMAL and
* type=CMD_THERMAL_HOST_TRIP_REACHED
*
* mrq_response::err is
* * 0: Trip successfully set.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOENT: No driver registered for thermal zone.
* * -#BPMP_EFAULT: Problem setting trip point.
*/
CMD_THERMAL_SET_TRIP = 2,
/**
* @brief Get the number of supported thermal zones.
*
* No request parameters required.
*
* mrq_response::err is always 0, indicating success.
*/
CMD_THERMAL_GET_NUM_ZONES = 3,
/**
* @brief Get the thermtrip of the specified zone.
*
* Host needs to supply request parameters.
*
* mrq_response::err is
* * 0: Valid zone information returned.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOENT: No driver registered for thermal zone.
* * -#BPMP_ERANGE if thermtrip is invalid or disabled.
* * -#BPMP_EFAULT: Problem reading zone information.
*/
CMD_THERMAL_GET_THERMTRIP = 4,
/** @brief: number of supported host-to-bpmp commands. May
* increase in future
*/
CMD_THERMAL_HOST_TO_BPMP_NUM
};
enum mrq_thermal_bpmp_to_host_cmd {
/**
* @brief Indication that the temperature for a zone has
* exceeded the range indicated in the thermal trip point
* for the zone.
*
* BPMP needs to supply request parameters. Host only needs to
* acknowledge.
*/
CMD_THERMAL_HOST_TRIP_REACHED = 100,
/** @brief: number of supported bpmp-to-host commands. May
* increase in future
*/
CMD_THERMAL_BPMP_TO_HOST_NUM
};
/*
* Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
*
* zone: Request type for which to check existence.
*/
struct cmd_thermal_query_abi_request {
uint32_t type;
} BPMP_ABI_PACKED;
/*
* Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
*
* zone: Number of thermal zone.
*/
struct cmd_thermal_get_temp_request {
uint32_t zone;
} BPMP_ABI_PACKED;
/*
* BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
*
* error: 0 if request succeeded.
* -BPMP_EINVAL if request parameters were invalid.
* -BPMP_ENOENT if no driver was registered for the specified thermal zone.
* -BPMP_EFAULT for other thermal zone driver errors.
* temp: Current temperature in millicelsius.
*/
struct cmd_thermal_get_temp_response {
int32_t temp;
} BPMP_ABI_PACKED;
/*
* Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
*
* zone: Number of thermal zone.
* low: Temperature of lower trip point in millicelsius
* high: Temperature of upper trip point in millicelsius
* enabled: 1 to enable trip point, 0 to disable trip point
*/
struct cmd_thermal_set_trip_request {
uint32_t zone;
int32_t low;
int32_t high;
uint32_t enabled;
} BPMP_ABI_PACKED;
/*
* BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
*
* zone: Number of thermal zone where trip point was reached.
*/
struct cmd_thermal_host_trip_reached_request {
uint32_t zone;
} BPMP_ABI_PACKED;
/*
* BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
*
* num: Number of supported thermal zones. The thermal zones are indexed
* starting from zero.
*/
struct cmd_thermal_get_num_zones_response {
uint32_t num;
} BPMP_ABI_PACKED;
/*
* Host->BPMP request data for request type CMD_THERMAL_GET_THERMTRIP
*
* zone: Number of thermal zone.
*/
struct cmd_thermal_get_thermtrip_request {
uint32_t zone;
} BPMP_ABI_PACKED;
/*
* BPMP->Host reply data for request CMD_THERMAL_GET_THERMTRIP
*
* thermtrip: HW shutdown temperature in millicelsius.
*/
struct cmd_thermal_get_thermtrip_response {
int32_t thermtrip;
} BPMP_ABI_PACKED;
/*
* Host->BPMP request data.
*
* Reply type is union mrq_thermal_bpmp_to_host_response.
*
* type: Type of request. Values listed in enum mrq_thermal_type.
* data: Request type specific parameters.
*/
struct mrq_thermal_host_to_bpmp_request {
uint32_t type;
union {
struct cmd_thermal_query_abi_request query_abi;
struct cmd_thermal_get_temp_request get_temp;
struct cmd_thermal_set_trip_request set_trip;
struct cmd_thermal_get_thermtrip_request get_thermtrip;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/*
* BPMP->Host request data.
*
* type: Type of request. Values listed in enum mrq_thermal_type.
* data: Request type specific parameters.
*/
struct mrq_thermal_bpmp_to_host_request {
uint32_t type;
union {
struct cmd_thermal_host_trip_reached_request host_trip_reached;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/*
* Data in reply to a Host->BPMP request.
*/
union mrq_thermal_bpmp_to_host_response {
struct cmd_thermal_get_temp_response get_temp;
struct cmd_thermal_get_thermtrip_response get_thermtrip;
struct cmd_thermal_get_num_zones_response get_num_zones;
} BPMP_ABI_PACKED;
/** @} Thermal */
/**
* @ingroup MRQ_Codes
* @def MRQ_OC_STATUS
* @brief Query over current status
*
* * Platforms: T234
* @cond bpmp_t234
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_oc_status_response
*
* @addtogroup OC_status
* @{
*/
#define OC_STATUS_MAX_SIZE 24U
/*
* @brief Response to #MRQ_OC_STATUS
*
* throt_en: Value for each OC alarm where zero signifies throttle is
* disabled, and non-zero throttle is enabled.
* event_cnt: Total number of OC events for each OC alarm.
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise.
*/
struct mrq_oc_status_response {
uint8_t throt_en[OC_STATUS_MAX_SIZE];
uint32_t event_cnt[OC_STATUS_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} OC_status */
/** @endcond bpmp_t234 */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_VHINT
* @brief Query CPU voltage hint data
*
* * Platforms: T186
* @cond bpmp_t186
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_vhint_request
* * Response Payload: N/A
*
* @addtogroup Vhint
* @{
*/
/**
* @brief Request with #MRQ_CPU_VHINT
*
* Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
* from BPMP to memory space pointed by #addr. CCPLEX is responsible
* to allocate sizeof(cpu_vhint_data) sized block of memory and
* appropriately map it for BPMP before sending the request.
*/
struct mrq_cpu_vhint_request {
/** @brief IOVA address for the #cpu_vhint_data */
uint32_t addr;
/** @brief ID of the cluster whose data is requested */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Description of the CPU v/f relation
*
* Used by #MRQ_CPU_VHINT call to carry data pointed by
* #mrq_cpu_vhint_request::addr
*/
struct cpu_vhint_data {
uint32_t ref_clk_hz; /**< reference frequency in Hz */
uint16_t pdiv; /**< post divider value */
uint16_t mdiv; /**< input divider value */
uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
/** table of ndiv values as a function of vINDEX (voltage index) */
uint16_t ndiv[80];
/** minimum allowed NDIV value */
uint16_t ndiv_min;
/** minimum allowed voltage hint value (as in vINDEX) */
uint16_t vfloor;
/** maximum allowed voltage hint value (as in vINDEX) */
uint16_t vceil;
/** post-multiplier for vindex value */
uint16_t vindex_mult;
/** post-divider for vindex value */
uint16_t vindex_div;
/** reserved for future use */
uint16_t reserved[328];
} BPMP_ABI_PACKED;
/** @} Vhint */
/** @endcond bpmp_t186 */
/**
* @ingroup MRQ_Codes
* @def MRQ_ABI_RATCHET
* @brief ABI ratchet value query
*
* * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_abi_ratchet_request
* * Response Payload: @ref mrq_abi_ratchet_response
* @addtogroup ABI_info
* @{
*/
/**
* @brief An ABI compatibility mechanism
*
* BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
* revision of this header file.
* 1. That future revision deprecates some MRQ
* 2. That future revision introduces a breaking change to an existing
* MRQ or
* 3. A bug is discovered in an existing implementation of the BPMP-FW
* (or possibly one of its clients) which warrants deprecating that
* implementation.
*/
#define BPMP_ABI_RATCHET_VALUE 3
/**
* @brief Request with #MRQ_ABI_RATCHET.
*
* #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which the requester was compiled.
*
* If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
* reply with mrq_response::err = -#BPMP_ERANGE to indicate that
* BPMP-FW cannot interoperate correctly with the requester. Requester
* should cease further communication with BPMP.
*
* Otherwise, err shall be 0.
*/
struct mrq_abi_ratchet_request {
/** @brief Requester's ratchet value */
uint16_t ratchet;
};
/**
* @brief Response to #MRQ_ABI_RATCHET
*
* #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which BPMP firwmare was compiled.
*
* If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
* the requster must either interoperate with BPMP according to an ABI
* header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
* communication with BPMP.
*
* If mrq_response::err is 0 and ratchet is greater than or equal to the
* requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
* normal operation.
*/
struct mrq_abi_ratchet_response {
/** @brief BPMP's ratchet value */
uint16_t ratchet;
};
/** @} ABI_info */
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_LATENCY
* @brief Query frequency dependent EMC DVFS latency
*
* * Platforms: T186, T194, T234
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_emc_dvfs_latency_response
* @addtogroup EMC
* @{
*/
/**
* @brief Used by @ref mrq_emc_dvfs_latency_response
*/
struct emc_dvfs_latency {
/** @brief EMC DVFS node frequency in kHz */
uint32_t freq;
/** @brief EMC DVFS latency in nanoseconds */
uint32_t latency;
} BPMP_ABI_PACKED;
#define EMC_DVFS_LATENCY_MAX_SIZE 14
/**
* @brief Response to #MRQ_EMC_DVFS_LATENCY
*/
struct mrq_emc_dvfs_latency_response {
/** @brief The number valid entries in #pairs */
uint32_t num_pairs;
/** @brief EMC DVFS node <frequency, latency> information */
struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} EMC */
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_EMCHUB
* @brief Query EMC HUB frequencies
*
* * Platforms: T234 onwards
* @cond (bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_emc_dvfs_emchub_response
* @addtogroup EMC
* @{
*/
/**
* @brief Used by @ref mrq_emc_dvfs_emchub_response
*/
struct emc_dvfs_emchub {
/** @brief EMC DVFS node frequency in kHz */
uint32_t freq;
/** @brief EMC HUB frequency in kHz */
uint32_t hub_freq;
} BPMP_ABI_PACKED;
#define EMC_DVFS_EMCHUB_MAX_SIZE EMC_DVFS_LATENCY_MAX_SIZE
/**
* @brief Response to #MRQ_EMC_DVFS_EMCHUB
*/
struct mrq_emc_dvfs_emchub_response {
/** @brief The number valid entries in #pairs */
uint32_t num_pairs;
/** @brief EMC DVFS node <frequency, hub frequency> information */
struct emc_dvfs_emchub pairs[EMC_DVFS_EMCHUB_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} EMC */
/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DISP_RFL
* @brief Set EMC display RFL handshake mode of operations
*
* * Platforms: T234 onwards
* @cond (bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_emc_disp_rfl_request
* * Response Payload: N/A
*
* @addtogroup EMC
* @{
*/
enum mrq_emc_disp_rfl_mode {
/** @brief EMC display RFL handshake disabled */
EMC_DISP_RFL_MODE_DISABLED = 0,
/** @brief EMC display RFL handshake enabled */
EMC_DISP_RFL_MODE_ENABLED = 1,
};
/**
* @ingroup EMC
* @brief Request with #MRQ_EMC_DISP_RFL
*
* Used by the sender of an #MRQ_EMC_DISP_RFL message to
* request the mode of EMC display RFL handshake.
*
* mrq_response::err is
* * 0: RFL mode is set successfully
* * -#BPMP_EINVAL: invalid mode requested
* * -#BPMP_ENOSYS: RFL handshake is not supported
* * -#BPMP_EACCES: Permission denied
* * -#BPMP_ENODEV: if disp rfl mrq is not supported by BPMP-FW
*/
struct mrq_emc_disp_rfl_request {
/** @brief EMC display RFL mode (@ref mrq_emc_disp_rfl_mode) */
uint32_t mode;
} BPMP_ABI_PACKED;
/** @} EMC */
/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_BWMGR
* @brief bwmgr requests
*
* * Platforms: T234 onwards
* @cond (bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_request
* * Response Payload: @ref mrq_bwmgr_response
*
* @addtogroup BWMGR
*
* @{
*/
enum mrq_bwmgr_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_BWMGR_QUERY_ABI = 0,
/**
* @brief Determine dram rate to satisfy iso/niso bw requests
*
* mrq_response::err is
* * 0: calc_rate succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_ENOTSUP: Requested bw is not available.
*/
CMD_BWMGR_CALC_RATE = 1
};
/*
* request data for request type CMD_BWMGR_QUERY_ABI
*
* type: Request type for which to check existence.
*/
struct cmd_bwmgr_query_abi_request {
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @brief Used by @ref cmd_bwmgr_calc_rate_request
*/
struct iso_req {
/* @brief bwmgr client ID @ref bpmp_bwmgr_ids */
uint32_t id;
/* @brief bw in kBps requested by client */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
#define MAX_ISO_CLIENTS 13U
/*
* request data for request type CMD_BWMGR_CALC_RATE
*/
struct cmd_bwmgr_calc_rate_request {
/* @brief total bw in kBps requested by all niso clients */
uint32_t sum_niso_bw;
/* @brief The number of iso clients */
uint32_t num_iso_clients;
/* @brief iso_req <id, iso_bw> information */
struct iso_req isobw_reqs[MAX_ISO_CLIENTS];
} BPMP_ABI_PACKED;
/*
* response data for request type CMD_BWMGR_CALC_RATE
*
* iso_rate_min: min dram data clk rate in kHz to satisfy all iso bw reqs
* total_rate_min: min dram data clk rate in kHz to satisfy all bw reqs
*/
struct cmd_bwmgr_calc_rate_response {
uint32_t iso_rate_min;
uint32_t total_rate_min;
} BPMP_ABI_PACKED;
/*
* @brief Request with #MRQ_BWMGR
*
*
* |sub-command |payload |
* |----------------------------|------------------------------|
* |CMD_BWMGR_QUERY_ABI | cmd_bwmgr_query_abi_request |
* |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_request |
*
*/
struct mrq_bwmgr_request {
uint32_t cmd;
union {
struct cmd_bwmgr_query_abi_request query_abi;
struct cmd_bwmgr_calc_rate_request bwmgr_rate_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/*
* @brief Response to MRQ_BWMGR
*
* |sub-command |payload |
* |----------------------------|------------------------------|
* |CMD_BWMGR_CALC_RATE | cmd_bwmgr_calc_rate_response |
*/
struct mrq_bwmgr_response {
union {
struct cmd_bwmgr_calc_rate_response bwmgr_rate_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} BWMGR */
/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_BWMGR_INT
* @brief bpmp-integrated bwmgr requests
*
* * Platforms: T234 onwards
* @cond (bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_int_request
* * Response Payload: @ref mrq_bwmgr_int_response
*
* @addtogroup BWMGR_INT
* @{
*/
enum mrq_bwmgr_int_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_BWMGR_INT_QUERY_ABI = 1,
/**
* @brief Determine and set dram rate to satisfy iso/niso bw request
*
* mrq_response::err is
* * 0: request succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* set_frequency in @ref cmd_bwmgr_int_calc_and_set_response
* will not be set.
* * -#BPMP_ENOTSUP: Requested bw is not available.
* set_frequency in @ref cmd_bwmgr_int_calc_and_set_response
* will be current dram-clk rate.
*/
CMD_BWMGR_INT_CALC_AND_SET = 2,
/**
* @brief Set a max DRAM frequency for the bandwidth-manager
*
* mrq_response::err is
* * 0: request succeeded.
* * -#BPMP_ENOTSUP: Requested cap frequency is not possible.
*/
CMD_BWMGR_INT_CAP_SET = 3
};
/*
* request structure for request type CMD_BWMGR_QUERY_ABI
*
* type: Request type for which to check existence.
*/
struct cmd_bwmgr_int_query_abi_request {
/* @brief request type determined by @ref mrq_bwmgr_int_cmd */
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @defgroup bwmgr_int_unit_type BWMGR_INT floor unit-types
* @addtogroup bwmgr_int_unit_type
* @{
*/
/** @brief kilobytes per second unit-type */
#define BWMGR_INT_UNIT_KBPS 0U
/** @brief kilohertz unit-type */
#define BWMGR_INT_UNIT_KHZ 1U
/** @} bwmgr_int_unit_type */
/*
* request data for request type CMD_BWMGR_INT_CALC_AND_SET
*/
struct cmd_bwmgr_int_calc_and_set_request {
/* @brief bwmgr client ID @ref bpmp_bwmgr_ids */
uint32_t client_id;
/* @brief average niso bw usage in kBps requested by client. */
uint32_t niso_bw;
/*
* @brief average iso bw usage in kBps requested by client.
* Value is ignored if client is niso. Determined by client_id.
*/
uint32_t iso_bw;
/*
* @brief memory clock floor requested by client.
* Unit determined by floor_unit.
*/
uint32_t mc_floor;
/*
* @brief toggle to determine the unit-type of floor value.
* See @ref bwmgr_int_unit_type definitions for unit-type mappings.
*/
uint8_t floor_unit;
} BPMP_ABI_PACKED;
struct cmd_bwmgr_int_cap_set_request {
/* @brief requested cap frequency in Hz. */
uint64_t rate;
} BPMP_ABI_PACKED;
/*
* response data for request type CMD_BWMGR_CALC_AND_SET
*/
struct cmd_bwmgr_int_calc_and_set_response {
/* @brief current set memory clock frequency in Hz */
uint64_t rate;
} BPMP_ABI_PACKED;
/*
* @brief Request with #MRQ_BWMGR_INT
*
*
* |sub-command |payload |
* |----------------------------|-----------------------------------|
* |CMD_BWMGR_INT_QUERY_ABI | cmd_bwmgr_int_query_abi_request |
* |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_request|
* |CMD_BWMGR_INT_CAP_SET | cmd_bwmgr_int_cap_set_request |
*
*/
struct mrq_bwmgr_int_request {
uint32_t cmd;
union {
struct cmd_bwmgr_int_query_abi_request query_abi;
struct cmd_bwmgr_int_calc_and_set_request bwmgr_calc_set_req;
struct cmd_bwmgr_int_cap_set_request bwmgr_cap_set_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/*
* @brief Response to MRQ_BWMGR_INT
*
* |sub-command |payload |
* |----------------------------|---------------------------------------|
* |CMD_BWMGR_INT_CALC_AND_SET | cmd_bwmgr_int_calc_and_set_response |
*/
struct mrq_bwmgr_int_response {
union {
struct cmd_bwmgr_int_calc_and_set_response bwmgr_calc_set_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} BWMGR_INT */
/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_ISO_CLIENT
* @brief ISO client requests
*
* * Platforms: T234 onwards
* @cond (bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_iso_client_request
* * Response Payload: @ref mrq_iso_client_response
*
* @addtogroup ISO_CLIENT
* @{
*/
enum mrq_iso_client_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_ISO_CLIENT_QUERY_ABI = 0,
/*
* @brief check for legal LA for the iso client. Without programming
* LA MC registers, calculate and ensure that legal LA is possible for
* iso bw requested by the ISO client.
*
* mrq_response::err is
* * 0: check la succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_EFAULT: Legal LA is not possible for client requested iso_bw
*/
CMD_ISO_CLIENT_CALCULATE_LA = 1,
/*
* @brief set LA for the iso client. Calculate and program the LA/PTSA
* MC registers corresponding to the client making bw request
*
* mrq_response::err is
* * 0: set la succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
* * -#BPMP_EFAULT: Failed to calculate or program MC registers.
*/
CMD_ISO_CLIENT_SET_LA = 2,
/*
* @brief Get max possible bw for iso client
*
* mrq_response::err is
* * 0: get_max_bw succeeded.
* * -#BPMP_EINVAL: Invalid request parameters.
*/
CMD_ISO_CLIENT_GET_MAX_BW = 3
};
/*
* request data for request type CMD_ISO_CLIENT_QUERY_ABI
*
* type: Request type for which to check existence.
*/
struct cmd_iso_client_query_abi_request {
uint32_t type;
} BPMP_ABI_PACKED;
/*
* request data for request type CMD_ISO_CLIENT_CALCULATE_LA
*
* id: client ID in @ref bpmp_bwmgr_ids
* bw: bw requested in kBps by client ID.
* init_bw_floor: initial dram_bw_floor in kBps passed by client ID.
* ISO client will perform mempool allocation and DVFS buffering based
* on this dram_bw_floor.
*/
struct cmd_iso_client_calculate_la_request {
uint32_t id;
uint32_t bw;
uint32_t init_bw_floor;
} BPMP_ABI_PACKED;
/*
* request data for request type CMD_ISO_CLIENT_SET_LA
*
* id: client ID in @ref bpmp_bwmgr_ids
* bw: bw requested in kBps by client ID.
* final_bw_floor: final dram_bw_floor in kBps.
* Sometimes the initial dram_bw_floor passed by ISO client may need to be
* updated by considering higher dram freq's. This is the final dram_bw_floor
* used to calculate and program MC registers.
*/
struct cmd_iso_client_set_la_request {
uint32_t id;
uint32_t bw;
uint32_t final_bw_floor;
} BPMP_ABI_PACKED;
/*
* request data for request type CMD_ISO_CLIENT_GET_MAX_BW
*
* id: client ID in @ref bpmp_bwmgr_ids
*/
struct cmd_iso_client_get_max_bw_request {
uint32_t id;
} BPMP_ABI_PACKED;
/*
* response data for request type CMD_ISO_CLIENT_CALCULATE_LA
*
* la_rate_floor: minimum dram_rate_floor in kHz at which a legal la is possible
* iso_client_only_rate: Minimum dram freq in kHz required to satisfy this clients
* iso bw request, assuming all other iso clients are inactive
*/
struct cmd_iso_client_calculate_la_response {
uint32_t la_rate_floor;
uint32_t iso_client_only_rate;
} BPMP_ABI_PACKED;
/**
* @brief Used by @ref cmd_iso_client_get_max_bw_response
*/
struct iso_max_bw {
/* @brief dram frequency in kHz */
uint32_t freq;
/* @brief max possible iso-bw in kBps */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
#define ISO_MAX_BW_MAX_SIZE 14U
/*
* response data for request type CMD_ISO_CLIENT_GET_MAX_BW
*/
struct cmd_iso_client_get_max_bw_response {
/* @brief The number valid entries in iso_max_bw pairs */
uint32_t num_pairs;
/* @brief max ISOBW <dram freq, max bw> information */
struct iso_max_bw pairs[ISO_MAX_BW_MAX_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_ISO_CLIENT
*
* Used by the sender of an #MRQ_ISO_CLIENT message.
*
* |sub-command |payload |
* |------------------------------------ |----------------------------------------|
* |CMD_ISO_CLIENT_QUERY_ABI |cmd_iso_client_query_abi_request |
* |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_request |
* |CMD_ISO_CLIENT_SET_LA |cmd_iso_client_set_la_request |
* |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_request |
*
*/
struct mrq_iso_client_request {
/* Type of request. Values listed in enum mrq_iso_client_cmd */
uint32_t cmd;
union {
struct cmd_iso_client_query_abi_request query_abi;
struct cmd_iso_client_calculate_la_request calculate_la_req;
struct cmd_iso_client_set_la_request set_la_req;
struct cmd_iso_client_get_max_bw_request max_isobw_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response to MRQ_ISO_CLIENT
*
* Each sub-command supported by @ref mrq_iso_client_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |---------------------------- |------------------------------------|
* |CMD_ISO_CLIENT_CALCULATE_LA |cmd_iso_client_calculate_la_response|
* |CMD_ISO_CLIENT_SET_LA |N/A |
* |CMD_ISO_CLIENT_GET_MAX_BW |cmd_iso_client_get_max_bw_response |
*
*/
struct mrq_iso_client_response {
union {
struct cmd_iso_client_calculate_la_response calculate_la_resp;
struct cmd_iso_client_get_max_bw_response max_isobw_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} ISO_CLIENT */
/** @endcond (bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_NDIV_LIMITS
* @brief CPU freq. limits in ndiv
*
* * Platforms: T194 onwards
* @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_ndiv_limits_request
* * Response Payload: @ref mrq_cpu_ndiv_limits_response
* @addtogroup CPU
* @{
*/
/**
* @brief Request for ndiv limits of a cluster
*/
struct mrq_cpu_ndiv_limits_request {
/** @brief Enum cluster_id */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_CPU_NDIV_LIMITS
*/
struct mrq_cpu_ndiv_limits_response {
/** @brief Reference frequency in Hz */
uint32_t ref_clk_hz;
/** @brief Post divider value */
uint16_t pdiv;
/** @brief Input divider value */
uint16_t mdiv;
/** @brief FMAX expressed with max NDIV value */
uint16_t ndiv_max;
/** @brief Minimum allowed NDIV value */
uint16_t ndiv_min;
} BPMP_ABI_PACKED;
/** @} CPU */
/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_CPU_AUTO_CC3
* @brief Query CPU cluster auto-CC3 configuration
*
* * Platforms: T194
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_auto_cc3_request
* * Response Payload: @ref mrq_cpu_auto_cc3_response
* @addtogroup CC3
*
* Queries from BPMP auto-CC3 configuration (allowed/not allowed) for a
* specified cluster. CCPLEX s/w uses this information to override its own
* device tree auto-CC3 settings, so that BPMP device tree is a single source of
* auto-CC3 platform configuration.
*
* @{
*/
/**
* @brief Request for auto-CC3 configuration of a cluster
*/
struct mrq_cpu_auto_cc3_request {
/** @brief Enum cluster_id (logical cluster id, known to CCPLEX s/w) */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_CPU_AUTO_CC3
*/
struct mrq_cpu_auto_cc3_response {
/**
* @brief auto-CC3 configuration
*
* - bits[31..10] reserved.
* - bits[9..1] cc3 ndiv
* - bit [0] if "1" auto-CC3 is allowed, if "0" auto-CC3 is not allowed
*/
uint32_t auto_cc3_config;
} BPMP_ABI_PACKED;
/** @} CC3 */
/** @endcond bpmp_t194 */
/**
* @ingroup MRQ_Codes
* @def MRQ_RINGBUF_CONSOLE
* @brief A ring buffer debug console for BPMP
* @addtogroup RingbufConsole
*
* The ring buffer debug console aims to be a substitute for the UART debug
* console. The debug console is implemented with two ring buffers in the
* BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
* and written to the buffers by the host via the MRQ interface.
*
* @{
*/
/**
* @brief Maximum number of bytes transferred in a single write command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
/**
* @brief Maximum number of bytes transferred in a single read command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
enum mrq_ringbuf_console_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response::err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
/**
* @brief Perform a read operation on the BPMP TX buffer
*
* mrq_response::err is 0
*/
CMD_RINGBUF_CONSOLE_READ = 1,
/**
* @brief Perform a write operation on the BPMP RX buffer
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_WRITE = 2,
/**
* @brief Get the length of the buffer and the physical addresses of
* the buffer data and the head and tail counters
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
};
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type
* #CMD_RINGBUF_CONSOLE_QUERY_ABI
*/
struct cmd_ringbuf_console_query_abi_req {
/** @brief Command identifier to be queried */
uint32_t cmd;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_query_abi_resp {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_req {
/**
* @brief Number of bytes requested to be read from the BPMP TX buffer
*/
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_resp {
/** @brief The actual data read from the BPMP TX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_req {
/** @brief The actual data to be written to the BPMP RX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_resp {
/** @brief Number of bytes of available space in the BPMP RX buffer */
uint32_t space_avail;
/** @brief Number of bytes that were written to the BPMP RX buffer */
uint8_t len;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_get_fifo_req {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
*/
struct cmd_ringbuf_console_get_fifo_resp {
/** @brief Physical address of the BPMP TX buffer */
uint64_t bpmp_tx_buf_addr;
/** @brief Physical address of the BPMP TX buffer head counter */
uint64_t bpmp_tx_head_addr;
/** @brief Physical address of the BPMP TX buffer tail counter */
uint64_t bpmp_tx_tail_addr;
/** @brief Length of the BPMP TX buffer */
uint32_t bpmp_tx_buf_len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data.
*
* Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
*/
struct mrq_ringbuf_console_host_to_bpmp_request {
/**
* @brief Type of request. Values listed in enum
* #mrq_ringbuf_console_host_to_bpmp_cmd.
*/
uint32_t type;
/** @brief request type specific parameters. */
union {
struct cmd_ringbuf_console_query_abi_req query_abi;
struct cmd_ringbuf_console_read_req read;
struct cmd_ringbuf_console_write_req write;
struct cmd_ringbuf_console_get_fifo_req get_fifo;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP reply data
*
* In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
*/
union mrq_ringbuf_console_bpmp_to_host_response {
struct cmd_ringbuf_console_query_abi_resp query_abi;
struct cmd_ringbuf_console_read_resp read;
struct cmd_ringbuf_console_write_resp write;
struct cmd_ringbuf_console_get_fifo_resp get_fifo;
} BPMP_ABI_PACKED;
/** @} RingbufConsole */
/**
* @ingroup MRQ_Codes
* @def MRQ_STRAP
* @brief Set a strap value controlled by BPMP
*
* * Platforms: T194 onwards
* @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_strap_request
* * Response Payload: N/A
* @addtogroup Strap
*
* A strap is an input that is sampled by a hardware unit during the
* unit's startup process. The sampled value of a strap affects the
* behavior of the unit until the unit is restarted. Many hardware
* units sample their straps at the instant that their resets are
* deasserted.
*
* BPMP owns registers which act as straps to various units. It
* exposes limited control of those straps via #MRQ_STRAP.
*
* @{
*/
enum mrq_strap_cmd {
/** @private */
STRAP_RESERVED = 0,
/** @brief Set a strap value */
STRAP_SET = 1
};
/**
* @brief Request with #MRQ_STRAP
*/
struct mrq_strap_request {
/** @brief @ref mrq_strap_cmd */
uint32_t cmd;
/** @brief Strap ID from @ref Strap_Identifiers */
uint32_t id;
/** @brief Desired value for strap (if cmd is #STRAP_SET) */
uint32_t value;
} BPMP_ABI_PACKED;
/** @} Strap */
/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_UPHY
* @brief Perform a UPHY operation
*
* * Platforms: T194 onwards
* @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_uphy_request
* * Response Payload: @ref mrq_uphy_response
*
* @addtogroup UPHY
* @{
*/
enum {
CMD_UPHY_PCIE_LANE_MARGIN_CONTROL = 1,
CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF = 5,
CMD_UPHY_DISPLAY_PORT_INIT = 6,
CMD_UPHY_DISPLAY_PORT_OFF = 7,
CMD_UPHY_XUSB_DYN_LANES_RESTORE = 8,
CMD_UPHY_MAX,
};
struct cmd_uphy_margin_control_request {
/** @brief Enable margin */
int32_t en;
/** @brief Clear the number of error and sections */
int32_t clr;
/** @brief Set x offset (1's complement) for left/right margin type (y should be 0) */
uint32_t x;
/** @brief Set y offset (1's complement) for left/right margin type (x should be 0) */
uint32_t y;
/** @brief Set number of bit blocks for each margin section */
uint32_t nblks;
} BPMP_ABI_PACKED;
struct cmd_uphy_margin_status_response {
/** @brief Number of errors observed */
uint32_t status;
} BPMP_ABI_PACKED;
struct cmd_uphy_ep_controller_pll_init_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T239 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
struct cmd_uphy_pcie_controller_state_request {
/** @brief PCIE controller number, T194 valid: 0-4; T234 valid: 0-10; T239 valid: 0-3 */
uint8_t pcie_controller;
uint8_t enable;
} BPMP_ABI_PACKED;
struct cmd_uphy_ep_controller_pll_off_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T239 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
struct cmd_uphy_display_port_init_request {
/** @brief DisplayPort link rate, T239 valid: 1620, 2700, 5400, 8100, 2160, 2430, 3240, 4320, 6750 */
uint16_t link_rate;
/** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
struct cmd_uphy_xusb_dyn_lanes_restore_request {
/** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
/**
* @ingroup UPHY
* @brief Request with #MRQ_UPHY
*
* Used by the sender of an #MRQ_UPHY message to control UPHY.
* The uphy_request is split into several sub-commands. CMD_UPHY_PCIE_LANE_MARGIN_STATUS
* requires no additional data. Others have a sub-command specific payload. Below table
* shows sub-commands with their corresponding payload data.
*
* |sub-command |payload |
* |------------------------------------ |----------------------------------------|
* |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |uphy_set_margin_control |
* |CMD_UPHY_PCIE_LANE_MARGIN_STATUS | |
* |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request |
* |CMD_UPHY_PCIE_CONTROLLER_STATE |cmd_uphy_pcie_controller_state_request |
* |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF |cmd_uphy_ep_controller_pll_off_request |
* |CMD_UPHY_PCIE_DISPLAY_PORT_INIT |cmd_uphy_display_port_init_request |
* |CMD_UPHY_PCIE_DISPLAY_PORT_OFF | |
* |CMD_UPHY_XUSB_DYN_LANES_RESTORE |cmd_uphy_xusb_dyn_lanes_restore_request |
*
*/
struct mrq_uphy_request {
/** @brief Lane number. */
uint16_t lane;
/** @brief Sub-command id. */
uint16_t cmd;
union {
struct cmd_uphy_margin_control_request uphy_set_margin_control;
struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
struct cmd_uphy_pcie_controller_state_request controller_state;
struct cmd_uphy_ep_controller_pll_off_request ep_ctrlr_pll_off;
struct cmd_uphy_display_port_init_request display_port_init;
struct cmd_uphy_xusb_dyn_lanes_restore_request xusb_dyn_lanes_restore;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup UPHY
* @brief Response to MRQ_UPHY
*
* Each sub-command supported by @ref mrq_uphy_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |---------------------------- |------------------------|
* |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | |
* |CMD_UPHY_PCIE_LANE_MARGIN_STATUS |uphy_get_margin_status |
*
*/
struct mrq_uphy_response {
union {
struct cmd_uphy_margin_status_response uphy_get_margin_status;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} UPHY */
/** @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500) */
/**
* @ingroup MRQ_Codes
* @def MRQ_FMON
* @brief Perform a frequency monitor configuration operations
*
* * Platforms: T194 onwards
* @cond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_fmon_request
* * Response Payload: @ref mrq_fmon_response
* @endcond (bpmp_t194 || bpmp_t234 || bpmp_t239 || bpmp_th500)
*
* @addtogroup FMON
* @{
* @cond (bpmp_t194 || bpmp_t234)
*/
enum {
/**
* @brief Clamp FMON configuration to specified rate.
*
* The monitored clock must be running for clamp to succeed. If
* clamped, FMON configuration is preserved when clock rate
* and/or state is changed.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EACCES: FMON access error @n
* -#BPMP_EBADCMD if subcommand is not supported @n
* -#BPMP_EBADSLT: clamp FMON on cluster with auto-CC3 enabled @n
* -#BPMP_EBUSY: fmon is already clamped at different rate @n
* -#BPMP_EFAULT: self-diagnostic error @n
* -#BPMP_EINVAL: invalid FMON configuration @n
* -#BPMP_EOPNOTSUPP: not in production mode @n
* -#BPMP_ENODEV: invalid clk_id @n
* -#BPMP_ENOENT: no calibration data, uninitialized @n
* -#BPMP_ENOTSUP: avfs config not set @n
* -#BPMP_ENOSYS: clamp FMON on cluster clock w/ no NAFLL @n
* -#BPMP_ETIMEDOUT: operation timed out @n
*/
CMD_FMON_GEAR_CLAMP = 1,
/**
* @brief Release clamped FMON configuration.
*
* Allow FMON configuration to follow monitored clock rate
* and/or state changes.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EBADCMD if subcommand is not supported @n
* -#BPMP_ENODEV: invalid clk_id @n
* -#BPMP_ENOENT: no calibration data, uninitialized @n
* -#BPMP_ENOTSUP: avfs config not set @n
* -#BPMP_EOPNOTSUPP: not in production mode @n
*/
CMD_FMON_GEAR_FREE = 2,
/**
* @brief Return rate FMON is clamped at, or 0 if FMON is not
* clamped.
*
* Inherently racy, since clamp state can be changed
* concurrently. Useful for testing.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EBADCMD if subcommand is not supported @n
* -#BPMP_ENODEV: invalid clk_id @n
* -#BPMP_ENOENT: no calibration data, uninitialized @n
* -#BPMP_ENOTSUP: avfs config not set @n
* -#BPMP_EOPNOTSUPP: not in production mode @n
*/
CMD_FMON_GEAR_GET = 3,
/**
* @brief Return current status of FMON faults detected by FMON
* h/w or s/w since last invocation of this command.
* Clears fault status.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_EBADCMD if subcommand is not supported @n
* -#BPMP_EINVAL: invalid fault type @n
* -#BPMP_ENODEV: invalid clk_id @n
* -#BPMP_ENOENT: no calibration data, uninitialized @n
* -#BPMP_ENOTSUP: avfs config not set @n
* -#BPMP_EOPNOTSUPP: not in production mode @n
*/
CMD_FMON_FAULT_STS_GET = 4,
};
/**
* @cond DEPRECATED
* Kept for backward compatibility
*/
#define CMD_FMON_NUM 4
/** @endcond DEPRECATED */
/**
* @defgroup fmon_fault_type FMON fault type
* @addtogroup fmon_fault_type
* @{
*/
/** @brief All detected FMON faults (h/w or s/w) */
#define FMON_FAULT_TYPE_ALL 0U
/** @brief FMON faults detected by h/w */
#define FMON_FAULT_TYPE_HW 1U
/** @brief FMON faults detected by s/w */
#define FMON_FAULT_TYPE_SW 2U
/** @} fmon_fault_type */
struct cmd_fmon_gear_clamp_request {
int32_t unused;
int64_t rate;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_clamp_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_get_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
struct cmd_fmon_gear_get_response {
int64_t rate;
} BPMP_ABI_PACKED;
struct cmd_fmon_fault_sts_get_request {
uint32_t fault_type; /**< @ref fmon_fault_type */
} BPMP_ABI_PACKED;
struct cmd_fmon_fault_sts_get_response {
uint32_t fault_sts;
} BPMP_ABI_PACKED;
/**
* @ingroup FMON
* @brief Request with #MRQ_FMON
*
* Used by the sender of an #MRQ_FMON message to configure clock
* frequency monitors. The FMON request is split into several
* sub-commands. Some sub-commands require no additional data.
* Others have a sub-command specific payload
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |CMD_FMON_GEAR_CLAMP |fmon_gear_clamp |
* |CMD_FMON_GEAR_FREE |- |
* |CMD_FMON_GEAR_GET |- |
* |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get |
*
*/
struct mrq_fmon_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
* - bits[31..24] is the sub-cmd.
* - bits[23..0] is monitored clock id used to select target
* FMON
*/
uint32_t cmd_and_id;
union {
struct cmd_fmon_gear_clamp_request fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_request fmon_gear_free;
/** @private */
struct cmd_fmon_gear_get_request fmon_gear_get;
struct cmd_fmon_fault_sts_get_request fmon_fault_sts_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup FMON
* @brief Response to MRQ_FMON
*
* Each sub-command supported by @ref mrq_fmon_request may
* return sub-command-specific data as indicated below.
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |CMD_FMON_GEAR_CLAMP |- |
* |CMD_FMON_GEAR_FREE |- |
* |CMD_FMON_GEAR_GET |fmon_gear_get |
* |CMD_FMON_FAULT_STS_GET |fmon_fault_sts_get |
*
*/
struct mrq_fmon_response {
union {
/** @private */
struct cmd_fmon_gear_clamp_response fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_response fmon_gear_free;
struct cmd_fmon_gear_get_response fmon_gear_get;
struct cmd_fmon_fault_sts_get_response fmon_fault_sts_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @endcond (bpmp_t194 || bpmp_t234) */
/** @} FMON */
/**
* @ingroup MRQ_Codes
* @def MRQ_EC
* @brief Provide status information on faults reported by Error
* Collator (EC) to HSM.
*
* * Platforms: T194
* @cond bpmp_t194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_ec_request
* * Response Payload: @ref mrq_ec_response
*
* @note This MRQ ABI is under construction, and subject to change
*
* @endcond bpmp_t194
* @addtogroup EC
* @{
* @cond bpmp_t194
*/
enum {
/**
* @cond DEPRECATED
* @brief Retrieve specified EC status.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off @n
* -#BPMP_EBADCMD if subcommand is not supported
* @endcond DEPRECATED
*/
CMD_EC_STATUS_GET = 1, /* deprecated */
/**
* @brief Retrieve specified EC extended status (includes error
* counter and user values).
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off @n
* -#BPMP_EBADCMD if subcommand is not supported
*/
CMD_EC_STATUS_EX_GET = 2,
CMD_EC_NUM,
};
/** @brief BPMP ECs error types */
enum bpmp_ec_err_type {
/** @brief Parity error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_INTERNAL = 1,
/** @brief ECC SEC error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_SEC_INTERNAL = 2,
/** @brief ECC DED error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_DED_INTERNAL = 3,
/** @brief Comparator error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_COMPARATOR = 4,
/** @brief Register parity error
*
* Error descriptor @ref ec_err_reg_parity_desc.
*/
EC_ERR_TYPE_REGISTER_PARITY = 5,
/** @brief Parity error from on-chip SRAM/FIFO
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_SRAM = 6,
/** @brief Clock Monitor error
*
* Error descriptor @ref ec_err_fmon_desc.
*/
EC_ERR_TYPE_CLOCK_MONITOR = 9,
/** @brief Voltage Monitor error
*
* Error descriptor @ref ec_err_vmon_desc.
*/
EC_ERR_TYPE_VOLTAGE_MONITOR = 10,
/** @brief SW Correctable error
*
* Error descriptor @ref ec_err_sw_error_desc.
*/
EC_ERR_TYPE_SW_CORRECTABLE = 16,
/** @brief SW Uncorrectable error
*
* Error descriptor @ref ec_err_sw_error_desc.
*/
EC_ERR_TYPE_SW_UNCORRECTABLE = 17,
/** @brief Other HW Correctable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_CORRECTABLE = 32,
/** @brief Other HW Uncorrectable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE = 33,
};
/** @brief Group of registers with parity error. */
enum ec_registers_group {
/** @brief Functional registers group */
EC_ERR_GROUP_FUNC_REG = 0U,
/** @brief SCR registers group */
EC_ERR_GROUP_SCR_REG = 1U,
};
/**
* @defgroup bpmp_ec_status_flags EC Status Flags
* @addtogroup bpmp_ec_status_flags
* @{
*/
/** @brief No EC error found flag */
#define EC_STATUS_FLAG_NO_ERROR 0x0001U
/** @brief Last EC error found flag */
#define EC_STATUS_FLAG_LAST_ERROR 0x0002U
/** @brief EC latent error flag */
#define EC_STATUS_FLAG_LATENT_ERROR 0x0004U
/** @} bpmp_ec_status_flags */
/**
* @defgroup bpmp_ec_desc_flags EC Descriptor Flags
* @addtogroup bpmp_ec_desc_flags
* @{
*/
/** @brief EC descriptor error resolved flag */
#define EC_DESC_FLAG_RESOLVED 0x0001U
/** @brief EC descriptor failed to retrieve id flag */
#define EC_DESC_FLAG_NO_ID 0x0002U
/** @} bpmp_ec_desc_flags */
/**
* |error type | fmon_clk_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_CLOCK_MONITOR |@ref bpmp_clock_ids |
*/
struct ec_err_fmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief FMON monitored clock id */
uint16_t fmon_clk_id;
/**
* @brief Bitmask of fault flags
*
* @ref bpmp_fmon_faults_flags
*/
uint32_t fmon_faults;
/** @brief FMON faults access error */
int32_t fmon_access_error;
} BPMP_ABI_PACKED;
/**
* | error type | vmon_adc_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_VOLTAGE_MONITOR |@ref bpmp_adc_ids |
*/
struct ec_err_vmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief VMON rail adc id */
uint16_t vmon_adc_id;
/** @brief Bitmask of bpmp_vmon_faults_flags */
uint32_t vmon_faults;
/** @brief VMON faults access error */
int32_t vmon_access_error;
} BPMP_ABI_PACKED;
/**
* |error type | reg_id values |
* |---------------------------------|-----------------------|
* |@ref EC_ERR_TYPE_REGISTER_PARITY | bpmp_ec_registers_ids |
*/
struct ec_err_reg_parity_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Register id */
uint16_t reg_id;
/** @brief Register group @ref ec_registers_group */
uint16_t reg_group;
} BPMP_ABI_PACKED;
/**
* |error type | err_source_id values |
* |--------------------------------- |----------------------|
* |@ref EC_ERR_TYPE_SW_CORRECTABLE | bpmp_ec_ce_swd_ids |
* |@ref EC_ERR_TYPE_SW_UNCORRECTABLE | bpmp_ec_ue_swd_ids |
*/
struct ec_err_sw_error_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Error source id */
uint16_t err_source_id;
/** @brief Sw error data */
uint32_t sw_error_data;
} BPMP_ABI_PACKED;
/**
* |error type | err_source_id values |
* |----------------------------------------|------------------------|
* |@ref EC_ERR_TYPE_PARITY_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_DED_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_COMPARATOR | bpmp_ec_comparator_ids|
* |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE | bpmp_ec_misc_hwd_ids |
* |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE | bpmp_ec_misc_hwd_ids |
* |@ref EC_ERR_TYPE_PARITY_SRAM | bpmp_clock_ids |
*/
struct ec_err_simple_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Error source id. Id space depends on error type. */
uint16_t err_source_id;
} BPMP_ABI_PACKED;
/** @brief Union of EC error descriptors */
union ec_err_desc {
struct ec_err_fmon_desc fmon_desc;
struct ec_err_vmon_desc vmon_desc;
struct ec_err_reg_parity_desc reg_parity_desc;
struct ec_err_sw_error_desc sw_error_desc;
struct ec_err_simple_desc simple_desc;
} BPMP_ABI_PACKED;
struct cmd_ec_status_get_request {
/** @brief HSM error line number that identifies target EC. */
uint32_t ec_hsm_id;
} BPMP_ABI_PACKED;
/** EC status maximum number of descriptors */
#define EC_ERR_STATUS_DESC_MAX_NUM 4U
/**
* @cond DEPRECATED
*/
struct cmd_ec_status_get_response {
/** @brief Target EC id (the same id received with request). */
uint32_t ec_hsm_id;
/**
* @brief Bitmask of @ref bpmp_ec_status_flags
*
* If NO_ERROR flag is set, error_ fields should be ignored
*/
uint32_t ec_status_flags;
/** @brief Found EC error index. */
uint32_t error_idx;
/** @brief Found EC error type @ref bpmp_ec_err_type. */
uint32_t error_type;
/** @brief Number of returned EC error descriptors */
uint32_t error_desc_num;
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} BPMP_ABI_PACKED;
/** @endcond DEPRECATED */
struct cmd_ec_status_ex_get_response {
/** @brief Target EC id (the same id received with request). */
uint32_t ec_hsm_id;
/**
* @brief Bitmask of @ref bpmp_ec_status_flags
*
* If NO_ERROR flag is set, error_ fields should be ignored
*/
uint32_t ec_status_flags;
/** @brief Found EC error index. */
uint32_t error_idx;
/** @brief Found EC error type @ref bpmp_ec_err_type. */
uint32_t error_type;
/** @brief Found EC mission error counter value */
uint32_t error_counter;
/** @brief Found EC mission error user value */
uint32_t error_uval;
/** @brief Reserved entry */
uint32_t reserved;
/** @brief Number of returned EC error descriptors */
uint32_t error_desc_num;
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} BPMP_ABI_PACKED;
/**
* @ingroup EC
* @brief Request with #MRQ_EC
*
* Used by the sender of an #MRQ_EC message to access ECs owned
* by BPMP.
*
* @cond DEPRECATED
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
* @endcond DEPRECATED
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_EX_GET |ec_status_get |
*
*/
struct mrq_ec_request {
/** @brief Sub-command id. */
uint32_t cmd_id;
union {
struct cmd_ec_status_get_request ec_status_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup EC
* @brief Response to MRQ_EC
*
* Each sub-command supported by @ref mrq_ec_request may return
* sub-command-specific data as indicated below.
*
* @cond DEPRECATED
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
* @endcond DEPRECATED
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_EX_GET |ec_status_ex_get |
*
*/
struct mrq_ec_response {
union {
/**
* @cond DEPRECATED
*/
struct cmd_ec_status_get_response ec_status_get;
/** @endcond DEPRECATED */
struct cmd_ec_status_ex_get_response ec_status_ex_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @endcond bpmp_t194 */
/** @} EC */
/**
* @ingroup MRQ_Codes
* @def MRQ_TELEMETRY
* @brief Get address of memory buffer refreshed with recently sampled
* telemetry data
*
* * Platforms: TH500 onwards
* @cond bpmp_th500
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_telemetry_response
* @addtogroup Telemetry
* @{
*/
/**
* @brief Response to #MRQ_TELEMETRY
*
* mrq_response::err is
* * 0: Telemetry data is available at returned address
* * -#BPMP_EACCES: MRQ master is not allowed to request buffer refresh
* * -#BPMP_ENAVAIL: Telemetry buffer cannot be refreshed via this MRQ channel
* * -#BPMP_ENOTSUP: Telemetry buffer is not supported by BPMP-FW
* * -#BPMP_ENODEV: Telemetry mrq is not supported by BPMP-FW
*/
struct mrq_telemetry_response {
/** @brief Physical address of telemetry data buffer */
uint64_t data_buf_addr; /**< see @ref bpmp_telemetry_layout */
} BPMP_ABI_PACKED;
/** @} Telemetry */
/** @endcond bpmp_th500 */
/**
* @ingroup MRQ_Codes
* @def MRQ_PWR_LIMIT
* @brief Control power limits.
*
* * Platforms: TH500 onwards
* @cond bpmp_th500
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pwr_limit_request
* * Response Payload: @ref mrq_pwr_limit_response
*
* @addtogroup Pwrlimit
* @{
*/
enum mrq_pwr_limit_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* command
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PWR_LIMIT_QUERY_ABI = 0,
/**
* @brief Set power limit
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
* * -#BPMP_EACCES: Request is not accepted
*/
CMD_PWR_LIMIT_SET = 1,
/**
* @brief Get power limit setting
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
*/
CMD_PWR_LIMIT_GET = 2,
/**
* @brief Get current power cap
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: Pwr limit mrq is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
*/
CMD_PWR_LIMIT_CURR_CAP = 3,
};
/**
* @defgroup bpmp_pwr_limit_type PWR_LIMIT TYPEs
* @{
*/
/** @brief Limit value specifies traget cap */
#define PWR_LIMIT_TYPE_TARGET_CAP 0U
/** @brief Limit value specifies maximum possible target cap */
#define PWR_LIMIT_TYPE_BOUND_MAX 1U
/** @brief Limit value specifies minimum possible target cap */
#define PWR_LIMIT_TYPE_BOUND_MIN 2U
/** @brief Number of limit types supported by mrq interface */
#define PWR_LIMIT_TYPE_NUM 3U
/** @} bpmp_pwr_limit_type */
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_QUERY_ABI
*/
struct cmd_pwr_limit_query_abi_request {
uint32_t cmd_code; /**< @ref mrq_pwr_limit_cmd */
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_SET
*
* Set specified limit of specified type from specified source. The success of
* the request means that specified value is accepted as input to arbitration
* with other sources settings for the same limit of the same type. Zero limit
* is ignored by the arbitration (i.e., indicates "no limit set").
*/
struct cmd_pwr_limit_set_request {
uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET
*
* Get previously set from specified source specified limit value of specified
* type.
*/
struct cmd_pwr_limit_get_request {
uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
uint32_t limit_type; /**< @ref bpmp_pwr_limit_type */
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_GET
*/
struct cmd_pwr_limit_get_response {
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP
*
* For specified limit get current power cap aggregated from all sources.
*/
struct cmd_pwr_limit_curr_cap_request {
uint32_t limit_id; /**< @ref bpmp_pwr_limit_id */
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_CURR_CAP
*/
struct cmd_pwr_limit_curr_cap_response {
uint32_t curr_cap;
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_PWR_LIMIT
*
* |sub-command |payload |
* |----------------------------|---------------------------------|
* |CMD_PWR_LIMIT_QUERY_ABI | cmd_pwr_limit_query_abi_request |
* |CMD_PWR_LIMIT_SET | cmd_pwr_limit_set_request |
* |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_request |
* |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_request |
*/
struct mrq_pwr_limit_request {
uint32_t cmd;
union {
struct cmd_pwr_limit_query_abi_request pwr_limit_query_abi_req;
struct cmd_pwr_limit_set_request pwr_limit_set_req;
struct cmd_pwr_limit_get_request pwr_limit_get_req;
struct cmd_pwr_limit_curr_cap_request pwr_limit_curr_cap_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response to MRQ_PWR_LIMIT
*
* |sub-command |payload |
* |----------------------------|---------------------------------|
* |CMD_PWR_LIMIT_QUERY_ABI | - |
* |CMD_PWR_LIMIT_SET | - |
* |CMD_PWR_LIMIT_GET | cmd_pwr_limit_get_response |
* |CMD_PWR_LIMIT_CURR_CAP | cmd_pwr_limit_curr_cap_response |
*/
struct mrq_pwr_limit_response {
union {
struct cmd_pwr_limit_get_response pwr_limit_get_rsp;
struct cmd_pwr_limit_curr_cap_response pwr_limit_curr_cap_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} PwrLimit */
/** @endcond bpmp_th500 */
/**
* @ingroup MRQ_Codes
* @def MRQ_GEARS
* @brief Get thresholds for NDIV offset switching
*
* * Platforms: TH500 onwards
* @cond bpmp_th500
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_gears_response
* @addtogroup Gears
* @{
*/
/**
* @brief Response to #MRQ_GEARS
*
* Used by the sender of an #MRQ_GEARS message to request thresholds
* for NDIV offset switching.
*
* The mrq_gears_response::ncpu array defines four thresholds in units
* of number of online CPUS to be used for choosing between five different
* NDIV offset settings for CCPLEX cluster NAFLLs
*
* 1. If number of online CPUs < ncpu[0] use offset0
* 2. If number of online CPUs < ncpu[1] use offset1
* 3. If number of online CPUs < ncpu[2] use offset2
* 4. If number of online CPUs < ncpu[3] use offset3
* 5. If number of online CPUs >= ncpu[3] disable offsetting
*
* For TH500 mrq_gears_response::ncpu array has four valid entries.
*
* mrq_response::err is
* * 0: gears defined and response data valid
* * -#BPMP_ENODEV: MRQ is not supported by BPMP-FW
* * -#BPMP_EACCES: Operation not permitted for the MRQ master
* * -#BPMP_ENAVAIL: NDIV offsetting is disabled
*/
struct mrq_gears_response {
/** @brief number of online CPUs for each gear */
uint32_t ncpu[16];
} BPMP_ABI_PACKED;
/** @} Gears */
/** @endcond bpmp_th500 */
/**
* @addtogroup Error_Codes
* Negative values for mrq_response::err generally indicate some
* error. The ABI defines the following error codes. Negating these
* defines is an exercise left to the user.
* @{
*/
/** @brief Operation not permitted */
#define BPMP_EPERM 1
/** @brief No such file or directory */
#define BPMP_ENOENT 2
/** @brief No MRQ handler */
#define BPMP_ENOHANDLER 3
/** @brief I/O error */
#define BPMP_EIO 5
/** @brief Bad sub-MRQ command */
#define BPMP_EBADCMD 6
/** @brief Resource temporarily unavailable */
#define BPMP_EAGAIN 11
/** @brief Not enough memory */
#define BPMP_ENOMEM 12
/** @brief Permission denied */
#define BPMP_EACCES 13
/** @brief Bad address */
#define BPMP_EFAULT 14
/** @brief Resource busy */
#define BPMP_EBUSY 16
/** @brief No such device */
#define BPMP_ENODEV 19
/** @brief Argument is a directory */
#define BPMP_EISDIR 21
/** @brief Invalid argument */
#define BPMP_EINVAL 22
/** @brief Timeout during operation */
#define BPMP_ETIMEDOUT 23
/** @brief Out of range */
#define BPMP_ERANGE 34
/** @brief Function not implemented */
#define BPMP_ENOSYS 38
/** @brief Invalid slot */
#define BPMP_EBADSLT 57
/** @brief Invalid message */
#define BPMP_EBADMSG 77
/** @brief Operation not supported */
#define BPMP_EOPNOTSUPP 95
/** @brief Targeted resource not available */
#define BPMP_ENAVAIL 119
/** @brief Not supported */
#define BPMP_ENOTSUP 134
/** @brief No such device or address */
#define BPMP_ENXIO 140
/** @} Error_Codes */
#if defined(BPMP_ABI_CHECKS)
#include "bpmp_abi_checks.h"
#endif
#endif