include/dt-bindings/usb/pd.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __DT_POWER_DELIVERY_H
 #define __DT_POWER_DELIVERY_H

 /* Power delivery Power Data Object definitions */
 #define PDO_TYPE_FIXED		0
 #define PDO_TYPE_BATT		1
 #define PDO_TYPE_VAR		2
 #define PDO_TYPE_APDO		3

 #define PDO_TYPE_SHIFT		30
 #define PDO_TYPE_MASK		0x3

 #define PDO_TYPE(t)	((t) << PDO_TYPE_SHIFT)

 #define PDO_VOLT_MASK		0x3ff
 #define PDO_CURR_MASK		0x3ff
 #define PDO_PWR_MASK		0x3ff

 #define PDO_FIXED_DUAL_ROLE	(1 << 29) /* Power role swap supported */
 #define PDO_FIXED_SUSPEND	(1 << 28) /* USB Suspend supported (Source) */
 #define PDO_FIXED_HIGHER_CAP	(1 << 28) /* Requires more than vSafe5V (Sink) */
 #define PDO_FIXED_EXTPOWER	(1 << 27) /* Externally powered */
 #define PDO_FIXED_USB_COMM	(1 << 26) /* USB communications capable */
 #define PDO_FIXED_DATA_SWAP	(1 << 25) /* Data role swap supported */
 #define PDO_FIXED_VOLT_SHIFT	10	/* 50mV units */
 #define PDO_FIXED_CURR_SHIFT	0	/* 10mA units */

 #define PDO_FIXED_VOLT(mv)	((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
 #define PDO_FIXED_CURR(ma)	((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)

 #define PDO_FIXED(mv, ma, flags)			\
 	(PDO_TYPE(PDO_TYPE_FIXED) | (flags) |		\
 	 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma))

 #define VSAFE5V 5000 /* mv units */

 #define PDO_BATT_MAX_VOLT_SHIFT	20	/* 50mV units */
 #define PDO_BATT_MIN_VOLT_SHIFT	10	/* 50mV units */
 #define PDO_BATT_MAX_PWR_SHIFT	0	/* 250mW units */

 #define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
 #define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
 #define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)

 #define PDO_BATT(min_mv, max_mv, max_mw)			\
 	(PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) |	\
 	 PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw))

 #define PDO_VAR_MAX_VOLT_SHIFT	20	/* 50mV units */
 #define PDO_VAR_MIN_VOLT_SHIFT	10	/* 50mV units */
 #define PDO_VAR_MAX_CURR_SHIFT	0	/* 10mA units */

 #define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
 #define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)

 #define PDO_VAR(min_mv, max_mv, max_ma)				\
 	(PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) |	\
 	 PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma))

 #define APDO_TYPE_PPS		0

 #define PDO_APDO_TYPE_SHIFT	28	/* Only valid value currently is 0x0 - PPS */
 #define PDO_APDO_TYPE_MASK	0x3

 #define PDO_APDO_TYPE(t)	((t) << PDO_APDO_TYPE_SHIFT)

 #define PDO_PPS_APDO_MAX_VOLT_SHIFT	17	/* 100mV units */
 #define PDO_PPS_APDO_MIN_VOLT_SHIFT	8	/* 100mV units */
 #define PDO_PPS_APDO_MAX_CURR_SHIFT	0	/* 50mA units */

 #define PDO_PPS_APDO_VOLT_MASK	0xff
 #define PDO_PPS_APDO_CURR_MASK	0x7f

 #define PDO_PPS_APDO_MIN_VOLT(mv)	\
 	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
 #define PDO_PPS_APDO_MAX_VOLT(mv)	\
 	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
 #define PDO_PPS_APDO_MAX_CURR(ma)	\
 	((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT)

 #define PDO_PPS_APDO(min_mv, max_mv, max_ma)					\
 	(PDO_TYPE(PDO_TYPE_APDO) | PDO_APDO_TYPE(APDO_TYPE_PPS) |		\
 	 PDO_PPS_APDO_MIN_VOLT(min_mv) | PDO_PPS_APDO_MAX_VOLT(max_mv) |	\
 	 PDO_PPS_APDO_MAX_CURR(max_ma))

  /*
   * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
   * Version 1.2"
   * Initial current capability of the new source when vSafe5V is applied.
   */
 #define FRS_DEFAULT_POWER      1
 #define FRS_5V_1P5A            2
 #define FRS_5V_3A              3

 /*
  * SVDM Identity Header
  * --------------------
  * <31>     :: data capable as a USB host
  * <30>     :: data capable as a USB device
  * <29:27>  :: product type (UFP / Cable / VPD)
  * <26>     :: modal operation supported (1b == yes)
  * <25:23>  :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0)
  * <22:21>  :: connector type (SVDM version 2.0+ only; set to zero in version 1.0)
  * <20:16>  :: Reserved, Shall be set to zero
  * <15:0>   :: USB-IF assigned VID for this cable vendor
  */
 /* SOP Product Type (UFP) */
 #define IDH_PTYPE_NOT_UFP       0
 #define IDH_PTYPE_HUB           1
 #define IDH_PTYPE_PERIPH        2
 #define IDH_PTYPE_PSD           3
 #define IDH_PTYPE_AMA           5

 /* SOP' Product Type (Cable Plug / VPD) */
 #define IDH_PTYPE_NOT_CABLE     0
 #define IDH_PTYPE_PCABLE        3
 #define IDH_PTYPE_ACABLE        4
 #define IDH_PTYPE_VPD           6

 /* SOP Product Type (DFP) */
 #define IDH_PTYPE_NOT_DFP       0
 #define IDH_PTYPE_DFP_HUB       1
 #define IDH_PTYPE_DFP_HOST      2
 #define IDH_PTYPE_DFP_PB        3

 #define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid)                \
 	((usbh) << 31 | (usbd) << 30 | ((ufp_cable) & 0x7) << 27                \
 	 | (is_modal) << 26 | ((dfp) & 0x7) << 23 | ((conn) & 0x3) << 21        \
 	 | ((vid) & 0xffff))

 /*
  * Cert Stat VDO
  * -------------
  * <31:0>  : USB-IF assigned XID for this cable
  */
 #define VDO_CERT(xid)		((xid) & 0xffffffff)

 /*
  * Product VDO
  * -----------
  * <31:16> : USB Product ID
  * <15:0>  : USB bcdDevice
  */
 #define VDO_PRODUCT(pid, bcd)   (((pid) & 0xffff) << 16 | ((bcd) & 0xffff))

 /*
  * UFP VDO (PD Revision 3.0+ only)
  * --------
  * <31:29> :: UFP VDO version
  * <28>    :: Reserved
  * <27:24> :: Device capability
  * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
  * <21:11> :: Reserved
  * <10:8>  :: Vconn power (AMA only)
  * <7>     :: Vconn required (AMA only, 0b == no, 1b == yes)
  * <6>     :: Vbus required (AMA only, 0b == yes, 1b == no)
  * <5:3>   :: Alternate modes
  * <2:0>   :: USB highest speed
  */
 /* UFP VDO Version */
 #define UFP_VDO_VER1_2		2

 /* Device Capability */
 #define DEV_USB2_CAPABLE	BIT(0)
 #define DEV_USB2_BILLBOARD	BIT(1)
 #define DEV_USB3_CAPABLE	BIT(2)
 #define DEV_USB4_CAPABLE	BIT(3)

 /* Connector Type */
 #define UFP_RECEPTACLE		2
 #define UFP_CAPTIVE		3

 /* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */
 #define AMA_VCONN_PWR_1W	0
 #define AMA_VCONN_PWR_1W5	1
 #define AMA_VCONN_PWR_2W	2
 #define AMA_VCONN_PWR_3W	3
 #define AMA_VCONN_PWR_4W	4
 #define AMA_VCONN_PWR_5W	5
 #define AMA_VCONN_PWR_6W	6

 /* Vconn Required (AMA only) */
 #define AMA_VCONN_NOT_REQ	0
 #define AMA_VCONN_REQ		1

 /* Vbus Required (AMA only) */
 #define AMA_VBUS_REQ		0
 #define AMA_VBUS_NOT_REQ	1

 /* Alternate Modes */
 #define UFP_ALTMODE_NOT_SUPP	0
 #define UFP_ALTMODE_TBT3	BIT(0)
 #define UFP_ALTMODE_RECFG	BIT(1)
 #define UFP_ALTMODE_NO_RECFG	BIT(2)

 /* USB Highest Speed */
 #define UFP_USB2_ONLY		0
 #define UFP_USB32_GEN1		1
 #define UFP_USB32_4_GEN2	2
 #define UFP_USB4_GEN3		3

 #define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd)			\
 	(((ver) & 0x7) << 29 | ((cap) & 0xf) << 24 | ((conn) & 0x3) << 22	\
 	 | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3	\
 	 | ((spd) & 0x7))

 /*
  * DFP VDO (PD Revision 3.0+ only)
  * --------
  * <31:29> :: DFP VDO version
  * <28:27> :: Reserved
  * <26:24> :: Host capability
  * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
  * <21:5>  :: Reserved
  * <4:0>   :: Port number
  */
 #define DFP_VDO_VER1_1		1
 #define HOST_USB2_CAPABLE	BIT(0)
 #define HOST_USB3_CAPABLE	BIT(1)
 #define HOST_USB4_CAPABLE	BIT(2)
 #define DFP_RECEPTACLE		2
 #define DFP_CAPTIVE		3

 #define VDO_DFP(ver, cap, conn, pnum)						\
 	(((ver) & 0x7) << 29 | ((cap) & 0x7) << 24 | ((conn) & 0x3) << 22	\
 	 | ((pnum) & 0x1f))

 /*
  * Passive Cable VDO
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
  * <23:21> :: VDO version
  * <20>    :: Reserved, Shall be set to zero
  * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
  * <17>    :: Reserved, Shall be set to zero
  * <16:13> :: cable latency (0001 == <10ns(~1m length))
  * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
  * <10:9>  :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
  * <8:7>   :: Reserved, Shall be set to zero
  * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
  * <4:3>   :: Reserved, Shall be set to zero
  * <2:0>   :: USB highest speed
  *
  * Active Cable VDO 1
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
  * <23:21> :: VDO version
  * <20>    :: Reserved, Shall be set to zero
  * <19:18> :: Connector type (10b == C, 11b == Captive)
  * <17>    :: Reserved, Shall be set to zero
  * <16:13> :: cable latency (0001 == <10ns(~1m length))
  * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
  * <10:9>  :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
  * <8>     :: SBU supported (0b == supported, 1b == not supported)
  * <7>     :: SBU type (0b == passive, 1b == active)
  * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
  * <4>     :: Vbus through cable (0b == no, 1b == yes)
  * <3>     :: SOP" controller present? (0b == no, 1b == yes)
  * <2:0>   :: USB highest speed
  */
 /* Cable VDO Version */
 #define CABLE_VDO_VER1_0	0
 #define CABLE_VDO_VER1_3	3

 /* Connector Type */
 #define CABLE_CTYPE		2
 #define CABLE_CAPTIVE		3

 /* Cable Latency */
 #define CABLE_LATENCY_1M	1
 #define CABLE_LATENCY_2M	2
 #define CABLE_LATENCY_3M	3
 #define CABLE_LATENCY_4M	4
 #define CABLE_LATENCY_5M	5
 #define CABLE_LATENCY_6M	6
 #define CABLE_LATENCY_7M	7
 #define CABLE_LATENCY_7M_PLUS	8

 /* Cable Termination Type */
 #define PCABLE_VCONN_NOT_REQ	0
 #define PCABLE_VCONN_REQ	1
 #define ACABLE_ONE_END		2
 #define ACABLE_BOTH_END		3

 /* Maximum Vbus Voltage */
 #define CABLE_MAX_VBUS_20V	0
 #define CABLE_MAX_VBUS_30V	1
 #define CABLE_MAX_VBUS_40V	2
 #define CABLE_MAX_VBUS_50V	3

 /* Active Cable SBU Supported/Type */
 #define ACABLE_SBU_SUPP		0
 #define ACABLE_SBU_NOT_SUPP	1
 #define ACABLE_SBU_PASSIVE	0
 #define ACABLE_SBU_ACTIVE	1

 /* Vbus Current Handling Capability */
 #define CABLE_CURR_DEF		0
 #define CABLE_CURR_3A		1
 #define CABLE_CURR_5A		2

 /* USB Highest Speed */
 #define CABLE_USB2_ONLY		0
 #define CABLE_USB32_GEN1	1
 #define CABLE_USB32_4_GEN2	2
 #define CABLE_USB4_GEN3		3

 #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)			\
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
 	 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
 	 | ((vbm) & 0x3) << 9 | ((cur) & 0x3) << 5 | ((spd) & 0x7))
 #define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
 	 | ((conn) & 0x3) << 18	| ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
 	 | ((vbm) & 0x3) << 9 | (sbu) << 8 | (sbut) << 7 | ((cur) & 0x3) << 5	\
 	 | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7))

 /*
  * Active Cable VDO 2
  * ---------
  * <31:24> :: Maximum operating temperature
  * <23:16> :: Shutdown temperature
  * <15>    :: Reserved, Shall be set to zero
  * <14:12> :: U3/CLd power
  * <11>    :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
  * <10>    :: Physical connection (0b == copper, 1b == optical)
  * <9>     :: Active element (0b == redriver, 1b == retimer)
  * <8>     :: USB4 supported (0b == yes, 1b == no)
  * <7:6>   :: USB2 hub hops consumed
  * <5>     :: USB2 supported (0b == yes, 1b == no)
  * <4>     :: USB3.2 supported (0b == yes, 1b == no)
  * <3>     :: USB lanes supported (0b == one lane, 1b == two lanes)
  * <2>     :: Optically isolated active cable (0b == no, 1b == yes)
  * <1>     :: Reserved, Shall be set to zero
  * <0>     :: USB gen (0b == gen1, 1b == gen2+)
  */
 /* U3/CLd Power*/
 #define ACAB2_U3_CLD_10MW_PLUS	0
 #define ACAB2_U3_CLD_10MW	1
 #define ACAB2_U3_CLD_5MW	2
 #define ACAB2_U3_CLD_1MW	3
 #define ACAB2_U3_CLD_500UW	4
 #define ACAB2_U3_CLD_200UW	5
 #define ACAB2_U3_CLD_50UW	6

 /* Other Active Cable VDO 2 Fields */
 #define ACAB2_U3U0_DIRECT	0
 #define ACAB2_U3U0_U3S		1
 #define ACAB2_PHY_COPPER	0
 #define ACAB2_PHY_OPTICAL	1
 #define ACAB2_REDRIVER		0
 #define ACAB2_RETIMER		1
 #define ACAB2_USB4_SUPP		0
 #define ACAB2_USB4_NOT_SUPP	1
 #define ACAB2_USB2_SUPP		0
 #define ACAB2_USB2_NOT_SUPP	1
 #define ACAB2_USB32_SUPP	0
 #define ACAB2_USB32_NOT_SUPP	1
 #define ACAB2_LANES_ONE		0
 #define ACAB2_LANES_TWO		1
 #define ACAB2_OPT_ISO_NO	0
 #define ACAB2_OPT_ISO_YES	1
 #define ACAB2_GEN_1		0
 #define ACAB2_GEN_2_PLUS	1

 #define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen)	\
 	(((mtemp) & 0xff) << 24 | ((stemp) & 0xff) << 16 | ((u3p) & 0x7) << 12	\
 	 | (trans) << 11 | (phy) << 10 | (ele) << 9 | (u4) << 8			\
 	 | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3		\
 	 | (iso) << 2 | (gen))

 /*
  * VPD VDO
  * ---------
  * <31:28> :: HW version
  * <27:24> :: FW version
  * <23:21> :: VDO version
  * <20:17> :: Reserved, Shall be set to zero
  * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
  * <14>    :: Charge through current support (0b == 3A, 1b == 5A)
  * <13>    :: Reserved, Shall be set to zero
  * <12:7>  :: Vbus impedance
  * <6:1>   :: Ground impedance
  * <0>     :: Charge through support (0b == no, 1b == yes)
  */
 #define VPD_VDO_VER1_0		0
 #define VPD_MAX_VBUS_20V	0
 #define VPD_MAX_VBUS_30V	1
 #define VPD_MAX_VBUS_40V	2
 #define VPD_MAX_VBUS_50V	3
 #define VPDCT_CURR_3A		0
 #define VPDCT_CURR_5A		1
 #define VPDCT_NOT_SUPP		0
 #define VPDCT_SUPP		1

 #define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct)			\
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21	\
 	 | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7	\
 	 | ((gi) & 0x3f) << 1 | (ct))

 #endif /* __DT_POWER_DELIVERY_H */
	/* SPDX-License-Identifier: GPL-2.0 */
	#ifndef __DT_POWER_DELIVERY_H
	#define __DT_POWER_DELIVERY_H

	/* Power delivery Power Data Object definitions */
	#define PDO_TYPE_FIXED 0
	#define PDO_TYPE_BATT 1
	#define PDO_TYPE_VAR 2
	#define PDO_TYPE_APDO 3

	#define PDO_TYPE_SHIFT 30
	#define PDO_TYPE_MASK 0x3

	#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT)

	#define PDO_VOLT_MASK 0x3ff
	#define PDO_CURR_MASK 0x3ff
	#define PDO_PWR_MASK 0x3ff

	#define PDO_FIXED_DUAL_ROLE (1 << 29) /* Power role swap supported */
	#define PDO_FIXED_SUSPEND (1 << 28) /* USB Suspend supported (Source) */
	#define PDO_FIXED_HIGHER_CAP (1 << 28) /* Requires more than vSafe5V (Sink) */
	#define PDO_FIXED_EXTPOWER (1 << 27) /* Externally powered */
	#define PDO_FIXED_USB_COMM (1 << 26) /* USB communications capable */
	#define PDO_FIXED_DATA_SWAP (1 << 25) /* Data role swap supported */
	#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */
	#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */

	#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
	#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)

	#define PDO_FIXED(mv, ma, flags) \
	(PDO_TYPE(PDO_TYPE_FIXED) \| (flags) \| \
	PDO_FIXED_VOLT(mv) \| PDO_FIXED_CURR(ma))

	#define VSAFE5V 5000 /* mv units */

	#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */
	#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */
	#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */

	#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT)
	#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT)
	#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT)

	#define PDO_BATT(min_mv, max_mv, max_mw) \
	(PDO_TYPE(PDO_TYPE_BATT) \| PDO_BATT_MIN_VOLT(min_mv) \| \
	PDO_BATT_MAX_VOLT(max_mv) \| PDO_BATT_MAX_POWER(max_mw))

	#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */
	#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */
	#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */

	#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT)
	#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT)
	#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT)

	#define PDO_VAR(min_mv, max_mv, max_ma) \
	(PDO_TYPE(PDO_TYPE_VAR) \| PDO_VAR_MIN_VOLT(min_mv) \| \
	PDO_VAR_MAX_VOLT(max_mv) \| PDO_VAR_MAX_CURR(max_ma))

	#define APDO_TYPE_PPS 0

	#define PDO_APDO_TYPE_SHIFT 28 /* Only valid value currently is 0x0 - PPS */
	#define PDO_APDO_TYPE_MASK 0x3

	#define PDO_APDO_TYPE(t) ((t) << PDO_APDO_TYPE_SHIFT)

	#define PDO_PPS_APDO_MAX_VOLT_SHIFT 17 /* 100mV units */
	#define PDO_PPS_APDO_MIN_VOLT_SHIFT 8 /* 100mV units */
	#define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */

	#define PDO_PPS_APDO_VOLT_MASK 0xff
	#define PDO_PPS_APDO_CURR_MASK 0x7f

	#define PDO_PPS_APDO_MIN_VOLT(mv) \
	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MIN_VOLT_SHIFT)
	#define PDO_PPS_APDO_MAX_VOLT(mv) \
	((((mv) / 100) & PDO_PPS_APDO_VOLT_MASK) << PDO_PPS_APDO_MAX_VOLT_SHIFT)
	#define PDO_PPS_APDO_MAX_CURR(ma) \
	((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT)

	#define PDO_PPS_APDO(min_mv, max_mv, max_ma) \
	(PDO_TYPE(PDO_TYPE_APDO) \| PDO_APDO_TYPE(APDO_TYPE_PPS) \| \
	PDO_PPS_APDO_MIN_VOLT(min_mv) \| PDO_PPS_APDO_MAX_VOLT(max_mv) \| \
	PDO_PPS_APDO_MAX_CURR(max_ma))

	/*
	* Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
	* Version 1.2"
	* Initial current capability of the new source when vSafe5V is applied.
	*/
	#define FRS_DEFAULT_POWER 1
	#define FRS_5V_1P5A 2
	#define FRS_5V_3A 3

	/*
	* SVDM Identity Header
	* --------------------
	* <31> :: data capable as a USB host
	* <30> :: data capable as a USB device
	* <29:27> :: product type (UFP / Cable / VPD)
	* <26> :: modal operation supported (1b == yes)
	* <25:23> :: product type (DFP) (SVDM version 2.0+ only; set to zero in version 1.0)
	* <22:21> :: connector type (SVDM version 2.0+ only; set to zero in version 1.0)
	* <20:16> :: Reserved, Shall be set to zero
	* <15:0> :: USB-IF assigned VID for this cable vendor
	*/
	/* SOP Product Type (UFP) */
	#define IDH_PTYPE_NOT_UFP 0
	#define IDH_PTYPE_HUB 1
	#define IDH_PTYPE_PERIPH 2
	#define IDH_PTYPE_PSD 3
	#define IDH_PTYPE_AMA 5

	/* SOP' Product Type (Cable Plug / VPD) */
	#define IDH_PTYPE_NOT_CABLE 0
	#define IDH_PTYPE_PCABLE 3
	#define IDH_PTYPE_ACABLE 4
	#define IDH_PTYPE_VPD 6

	/* SOP Product Type (DFP) */
	#define IDH_PTYPE_NOT_DFP 0
	#define IDH_PTYPE_DFP_HUB 1
	#define IDH_PTYPE_DFP_HOST 2
	#define IDH_PTYPE_DFP_PB 3

	#define VDO_IDH(usbh, usbd, ufp_cable, is_modal, dfp, conn, vid) \
	((usbh) << 31 \| (usbd) << 30 \| ((ufp_cable) & 0x7) << 27 \
	\| (is_modal) << 26 \| ((dfp) & 0x7) << 23 \| ((conn) & 0x3) << 21 \
	\| ((vid) & 0xffff))

	/*
	* Cert Stat VDO
	* -------------
	* <31:0> : USB-IF assigned XID for this cable
	*/
	#define VDO_CERT(xid) ((xid) & 0xffffffff)

	/*
	* Product VDO
	* -----------
	* <31:16> : USB Product ID
	* <15:0> : USB bcdDevice
	*/
	#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 \| ((bcd) & 0xffff))

	/*
	* UFP VDO (PD Revision 3.0+ only)
	* --------
	* <31:29> :: UFP VDO version
	* <28> :: Reserved
	* <27:24> :: Device capability
	* <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
	* <21:11> :: Reserved
	* <10:8> :: Vconn power (AMA only)
	* <7> :: Vconn required (AMA only, 0b == no, 1b == yes)
	* <6> :: Vbus required (AMA only, 0b == yes, 1b == no)
	* <5:3> :: Alternate modes
	* <2:0> :: USB highest speed
	*/
	/* UFP VDO Version */
	#define UFP_VDO_VER1_2 2

	/* Device Capability */
	#define DEV_USB2_CAPABLE BIT(0)
	#define DEV_USB2_BILLBOARD BIT(1)
	#define DEV_USB3_CAPABLE BIT(2)
	#define DEV_USB4_CAPABLE BIT(3)

	/* Connector Type */
	#define UFP_RECEPTACLE 2
	#define UFP_CAPTIVE 3

	/* Vconn Power (AMA only, set to AMA_VCONN_NOT_REQ if Vconn is not required) */
	#define AMA_VCONN_PWR_1W 0
	#define AMA_VCONN_PWR_1W5 1
	#define AMA_VCONN_PWR_2W 2
	#define AMA_VCONN_PWR_3W 3
	#define AMA_VCONN_PWR_4W 4
	#define AMA_VCONN_PWR_5W 5
	#define AMA_VCONN_PWR_6W 6

	/* Vconn Required (AMA only) */
	#define AMA_VCONN_NOT_REQ 0
	#define AMA_VCONN_REQ 1

	/* Vbus Required (AMA only) */
	#define AMA_VBUS_REQ 0
	#define AMA_VBUS_NOT_REQ 1

	/* Alternate Modes */
	#define UFP_ALTMODE_NOT_SUPP 0
	#define UFP_ALTMODE_TBT3 BIT(0)
	#define UFP_ALTMODE_RECFG BIT(1)
	#define UFP_ALTMODE_NO_RECFG BIT(2)

	/* USB Highest Speed */
	#define UFP_USB2_ONLY 0
	#define UFP_USB32_GEN1 1
	#define UFP_USB32_4_GEN2 2
	#define UFP_USB4_GEN3 3

	#define VDO_UFP(ver, cap, conn, vcpwr, vcr, vbr, alt, spd) \
	(((ver) & 0x7) << 29 \| ((cap) & 0xf) << 24 \| ((conn) & 0x3) << 22 \
	\| ((vcpwr) & 0x7) << 8 \| (vcr) << 7 \| (vbr) << 6 \| ((alt) & 0x7) << 3 \
	\| ((spd) & 0x7))

	/*
	* DFP VDO (PD Revision 3.0+ only)
	* --------
	* <31:29> :: DFP VDO version
	* <28:27> :: Reserved
	* <26:24> :: Host capability
	* <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
	* <21:5> :: Reserved
	* <4:0> :: Port number
	*/
	#define DFP_VDO_VER1_1 1
	#define HOST_USB2_CAPABLE BIT(0)
	#define HOST_USB3_CAPABLE BIT(1)
	#define HOST_USB4_CAPABLE BIT(2)
	#define DFP_RECEPTACLE 2
	#define DFP_CAPTIVE 3

	#define VDO_DFP(ver, cap, conn, pnum) \
	(((ver) & 0x7) << 29 \| ((cap) & 0x7) << 24 \| ((conn) & 0x3) << 22 \
	\| ((pnum) & 0x1f))

	/*
	* Passive Cable VDO
	* ---------
	* <31:28> :: Cable HW version
	* <27:24> :: Cable FW version
	* <23:21> :: VDO version
	* <20> :: Reserved, Shall be set to zero
	* <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
	* <17> :: Reserved, Shall be set to zero
	* <16:13> :: cable latency (0001 == <10ns(~1m length))
	* <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
	* <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
	* <8:7> :: Reserved, Shall be set to zero
	* <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
	* <4:3> :: Reserved, Shall be set to zero
	* <2:0> :: USB highest speed
	*
	* Active Cable VDO 1
	* ---------
	* <31:28> :: Cable HW version
	* <27:24> :: Cable FW version
	* <23:21> :: VDO version
	* <20> :: Reserved, Shall be set to zero
	* <19:18> :: Connector type (10b == C, 11b == Captive)
	* <17> :: Reserved, Shall be set to zero
	* <16:13> :: cable latency (0001 == <10ns(~1m length))
	* <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
	* <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
	* <8> :: SBU supported (0b == supported, 1b == not supported)
	* <7> :: SBU type (0b == passive, 1b == active)
	* <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
	* <4> :: Vbus through cable (0b == no, 1b == yes)
	* <3> :: SOP" controller present? (0b == no, 1b == yes)
	* <2:0> :: USB highest speed
	*/
	/* Cable VDO Version */
	#define CABLE_VDO_VER1_0 0
	#define CABLE_VDO_VER1_3 3

	/* Connector Type */
	#define CABLE_CTYPE 2
	#define CABLE_CAPTIVE 3

	/* Cable Latency */
	#define CABLE_LATENCY_1M 1
	#define CABLE_LATENCY_2M 2
	#define CABLE_LATENCY_3M 3
	#define CABLE_LATENCY_4M 4
	#define CABLE_LATENCY_5M 5
	#define CABLE_LATENCY_6M 6
	#define CABLE_LATENCY_7M 7
	#define CABLE_LATENCY_7M_PLUS 8

	/* Cable Termination Type */
	#define PCABLE_VCONN_NOT_REQ 0
	#define PCABLE_VCONN_REQ 1
	#define ACABLE_ONE_END 2
	#define ACABLE_BOTH_END 3

	/* Maximum Vbus Voltage */
	#define CABLE_MAX_VBUS_20V 0
	#define CABLE_MAX_VBUS_30V 1
	#define CABLE_MAX_VBUS_40V 2
	#define CABLE_MAX_VBUS_50V 3

	/* Active Cable SBU Supported/Type */
	#define ACABLE_SBU_SUPP 0
	#define ACABLE_SBU_NOT_SUPP 1
	#define ACABLE_SBU_PASSIVE 0
	#define ACABLE_SBU_ACTIVE 1

	/* Vbus Current Handling Capability */
	#define CABLE_CURR_DEF 0
	#define CABLE_CURR_3A 1
	#define CABLE_CURR_5A 2

	/* USB Highest Speed */
	#define CABLE_USB2_ONLY 0
	#define CABLE_USB32_GEN1 1
	#define CABLE_USB32_4_GEN2 2
	#define CABLE_USB4_GEN3 3

	#define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd) \
	(((hw) & 0xf) << 28 \| ((fw) & 0xf) << 24 \| ((ver) & 0x7) << 21 \
	\| ((conn) & 0x3) << 18 \| ((lat) & 0xf) << 13 \| ((term) & 0x3) << 11 \
	\| ((vbm) & 0x3) << 9 \| ((cur) & 0x3) << 5 \| ((spd) & 0x7))
	#define VDO_ACABLE1(hw, fw, ver, conn, lat, term, vbm, sbu, sbut, cur, vbt, sopp, spd) \
	(((hw) & 0xf) << 28 \| ((fw) & 0xf) << 24 \| ((ver) & 0x7) << 21 \
	\| ((conn) & 0x3) << 18 \| ((lat) & 0xf) << 13 \| ((term) & 0x3) << 11 \
	\| ((vbm) & 0x3) << 9 \| (sbu) << 8 \| (sbut) << 7 \| ((cur) & 0x3) << 5 \
	\| (vbt) << 4 \| (sopp) << 3 \| ((spd) & 0x7))

	/*
	* Active Cable VDO 2
	* ---------
	* <31:24> :: Maximum operating temperature
	* <23:16> :: Shutdown temperature
	* <15> :: Reserved, Shall be set to zero
	* <14:12> :: U3/CLd power
	* <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
	* <10> :: Physical connection (0b == copper, 1b == optical)
	* <9> :: Active element (0b == redriver, 1b == retimer)
	* <8> :: USB4 supported (0b == yes, 1b == no)
	* <7:6> :: USB2 hub hops consumed
	* <5> :: USB2 supported (0b == yes, 1b == no)
	* <4> :: USB3.2 supported (0b == yes, 1b == no)
	* <3> :: USB lanes supported (0b == one lane, 1b == two lanes)
	* <2> :: Optically isolated active cable (0b == no, 1b == yes)
	* <1> :: Reserved, Shall be set to zero
	* <0> :: USB gen (0b == gen1, 1b == gen2+)
	*/
	/* U3/CLd Power*/
	#define ACAB2_U3_CLD_10MW_PLUS 0
	#define ACAB2_U3_CLD_10MW 1
	#define ACAB2_U3_CLD_5MW 2
	#define ACAB2_U3_CLD_1MW 3
	#define ACAB2_U3_CLD_500UW 4
	#define ACAB2_U3_CLD_200UW 5
	#define ACAB2_U3_CLD_50UW 6

	/* Other Active Cable VDO 2 Fields */
	#define ACAB2_U3U0_DIRECT 0
	#define ACAB2_U3U0_U3S 1
	#define ACAB2_PHY_COPPER 0
	#define ACAB2_PHY_OPTICAL 1
	#define ACAB2_REDRIVER 0
	#define ACAB2_RETIMER 1
	#define ACAB2_USB4_SUPP 0
	#define ACAB2_USB4_NOT_SUPP 1
	#define ACAB2_USB2_SUPP 0
	#define ACAB2_USB2_NOT_SUPP 1
	#define ACAB2_USB32_SUPP 0
	#define ACAB2_USB32_NOT_SUPP 1
	#define ACAB2_LANES_ONE 0
	#define ACAB2_LANES_TWO 1
	#define ACAB2_OPT_ISO_NO 0
	#define ACAB2_OPT_ISO_YES 1
	#define ACAB2_GEN_1 0
	#define ACAB2_GEN_2_PLUS 1

	#define VDO_ACABLE2(mtemp, stemp, u3p, trans, phy, ele, u4, hops, u2, u32, lane, iso, gen) \
	(((mtemp) & 0xff) << 24 \| ((stemp) & 0xff) << 16 \| ((u3p) & 0x7) << 12 \
	\| (trans) << 11 \| (phy) << 10 \| (ele) << 9 \| (u4) << 8 \
	\| ((hops) & 0x3) << 6 \| (u2) << 5 \| (u32) << 4 \| (lane) << 3 \
	\| (iso) << 2 \| (gen))

	/*
	* VPD VDO
	* ---------
	* <31:28> :: HW version
	* <27:24> :: FW version
	* <23:21> :: VDO version
	* <20:17> :: Reserved, Shall be set to zero
	* <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
	* <14> :: Charge through current support (0b == 3A, 1b == 5A)
	* <13> :: Reserved, Shall be set to zero
	* <12:7> :: Vbus impedance
	* <6:1> :: Ground impedance
	* <0> :: Charge through support (0b == no, 1b == yes)
	*/
	#define VPD_VDO_VER1_0 0
	#define VPD_MAX_VBUS_20V 0
	#define VPD_MAX_VBUS_30V 1
	#define VPD_MAX_VBUS_40V 2
	#define VPD_MAX_VBUS_50V 3
	#define VPDCT_CURR_3A 0
	#define VPDCT_CURR_5A 1
	#define VPDCT_NOT_SUPP 0
	#define VPDCT_SUPP 1

	#define VDO_VPD(hw, fw, ver, vbm, curr, vbi, gi, ct) \
	(((hw) & 0xf) << 28 \| ((fw) & 0xf) << 24 \| ((ver) & 0x7) << 21 \
	\| ((vbm) & 0x3) << 15 \| (curr) << 14 \| ((vbi) & 0x3f) << 7 \
	\| ((gi) & 0x3f) << 1 \| (ct))

	#endif /* __DT_POWER_DELIVERY_H */