| /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*- |
| */ |
| /* |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/device.h> |
| #include <linux/oom.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pnp.h> |
| #include <linux/slab.h> |
| #include <linux/vgaarb.h> |
| #include <linux/vga_switcheroo.h> |
| #include <linux/vt.h> |
| #include <acpi/video.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/i915_drm.h> |
| |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include "i915_pmu.h" |
| #include "i915_query.h" |
| #include "i915_vgpu.h" |
| #include "intel_drv.h" |
| #include "intel_uc.h" |
| |
| static struct drm_driver driver; |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG) |
| static unsigned int i915_load_fail_count; |
| |
| bool __i915_inject_load_failure(const char *func, int line) |
| { |
| if (i915_load_fail_count >= i915_modparams.inject_load_failure) |
| return false; |
| |
| if (++i915_load_fail_count == i915_modparams.inject_load_failure) { |
| DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n", |
| i915_modparams.inject_load_failure, func, line); |
| i915_modparams.inject_load_failure = 0; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool i915_error_injected(void) |
| { |
| return i915_load_fail_count && !i915_modparams.inject_load_failure; |
| } |
| |
| #endif |
| |
| #define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI" |
| #define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \ |
| "providing the dmesg log by booting with drm.debug=0xf" |
| |
| void |
| __i915_printk(struct drm_i915_private *dev_priv, const char *level, |
| const char *fmt, ...) |
| { |
| static bool shown_bug_once; |
| struct device *kdev = dev_priv->drm.dev; |
| bool is_error = level[1] <= KERN_ERR[1]; |
| bool is_debug = level[1] == KERN_DEBUG[1]; |
| struct va_format vaf; |
| va_list args; |
| |
| if (is_debug && !(drm_debug & DRM_UT_DRIVER)) |
| return; |
| |
| va_start(args, fmt); |
| |
| vaf.fmt = fmt; |
| vaf.va = &args; |
| |
| if (is_error) |
| dev_printk(level, kdev, "%pV", &vaf); |
| else |
| dev_printk(level, kdev, "[" DRM_NAME ":%ps] %pV", |
| __builtin_return_address(0), &vaf); |
| |
| va_end(args); |
| |
| if (is_error && !shown_bug_once) { |
| /* |
| * Ask the user to file a bug report for the error, except |
| * if they may have caused the bug by fiddling with unsafe |
| * module parameters. |
| */ |
| if (!test_taint(TAINT_USER)) |
| dev_notice(kdev, "%s", FDO_BUG_MSG); |
| shown_bug_once = true; |
| } |
| } |
| |
| /* Map PCH device id to PCH type, or PCH_NONE if unknown. */ |
| static enum intel_pch |
| intel_pch_type(const struct drm_i915_private *dev_priv, unsigned short id) |
| { |
| switch (id) { |
| case INTEL_PCH_IBX_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found Ibex Peak PCH\n"); |
| WARN_ON(!IS_GEN5(dev_priv)); |
| return PCH_IBX; |
| case INTEL_PCH_CPT_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found CougarPoint PCH\n"); |
| WARN_ON(!IS_GEN6(dev_priv) && !IS_IVYBRIDGE(dev_priv)); |
| return PCH_CPT; |
| case INTEL_PCH_PPT_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found PantherPoint PCH\n"); |
| WARN_ON(!IS_GEN6(dev_priv) && !IS_IVYBRIDGE(dev_priv)); |
| /* PantherPoint is CPT compatible */ |
| return PCH_CPT; |
| case INTEL_PCH_LPT_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found LynxPoint PCH\n"); |
| WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)); |
| WARN_ON(IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv)); |
| return PCH_LPT; |
| case INTEL_PCH_LPT_LP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found LynxPoint LP PCH\n"); |
| WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)); |
| WARN_ON(!IS_HSW_ULT(dev_priv) && !IS_BDW_ULT(dev_priv)); |
| return PCH_LPT; |
| case INTEL_PCH_WPT_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found WildcatPoint PCH\n"); |
| WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)); |
| WARN_ON(IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv)); |
| /* WildcatPoint is LPT compatible */ |
| return PCH_LPT; |
| case INTEL_PCH_WPT_LP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found WildcatPoint LP PCH\n"); |
| WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)); |
| WARN_ON(!IS_HSW_ULT(dev_priv) && !IS_BDW_ULT(dev_priv)); |
| /* WildcatPoint is LPT compatible */ |
| return PCH_LPT; |
| case INTEL_PCH_SPT_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found SunrisePoint PCH\n"); |
| WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv)); |
| return PCH_SPT; |
| case INTEL_PCH_SPT_LP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n"); |
| WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv)); |
| return PCH_SPT; |
| case INTEL_PCH_KBP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found Kaby Lake PCH (KBP)\n"); |
| WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv) && |
| !IS_COFFEELAKE(dev_priv)); |
| return PCH_KBP; |
| case INTEL_PCH_CNP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found Cannon Lake PCH (CNP)\n"); |
| WARN_ON(!IS_CANNONLAKE(dev_priv) && !IS_COFFEELAKE(dev_priv)); |
| return PCH_CNP; |
| case INTEL_PCH_CNP_LP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found Cannon Lake LP PCH (CNP-LP)\n"); |
| WARN_ON(!IS_CANNONLAKE(dev_priv) && !IS_COFFEELAKE(dev_priv)); |
| return PCH_CNP; |
| case INTEL_PCH_ICP_DEVICE_ID_TYPE: |
| DRM_DEBUG_KMS("Found Ice Lake PCH\n"); |
| WARN_ON(!IS_ICELAKE(dev_priv)); |
| return PCH_ICP; |
| default: |
| return PCH_NONE; |
| } |
| } |
| |
| static bool intel_is_virt_pch(unsigned short id, |
| unsigned short svendor, unsigned short sdevice) |
| { |
| return (id == INTEL_PCH_P2X_DEVICE_ID_TYPE || |
| id == INTEL_PCH_P3X_DEVICE_ID_TYPE || |
| (id == INTEL_PCH_QEMU_DEVICE_ID_TYPE && |
| svendor == PCI_SUBVENDOR_ID_REDHAT_QUMRANET && |
| sdevice == PCI_SUBDEVICE_ID_QEMU)); |
| } |
| |
| static unsigned short |
| intel_virt_detect_pch(const struct drm_i915_private *dev_priv) |
| { |
| unsigned short id = 0; |
| |
| /* |
| * In a virtualized passthrough environment we can be in a |
| * setup where the ISA bridge is not able to be passed through. |
| * In this case, a south bridge can be emulated and we have to |
| * make an educated guess as to which PCH is really there. |
| */ |
| |
| if (IS_GEN5(dev_priv)) |
| id = INTEL_PCH_IBX_DEVICE_ID_TYPE; |
| else if (IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv)) |
| id = INTEL_PCH_CPT_DEVICE_ID_TYPE; |
| else if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv)) |
| id = INTEL_PCH_LPT_LP_DEVICE_ID_TYPE; |
| else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) |
| id = INTEL_PCH_LPT_DEVICE_ID_TYPE; |
| else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) |
| id = INTEL_PCH_SPT_DEVICE_ID_TYPE; |
| else if (IS_COFFEELAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) |
| id = INTEL_PCH_CNP_DEVICE_ID_TYPE; |
| else if (IS_ICELAKE(dev_priv)) |
| id = INTEL_PCH_ICP_DEVICE_ID_TYPE; |
| |
| if (id) |
| DRM_DEBUG_KMS("Assuming PCH ID %04x\n", id); |
| else |
| DRM_DEBUG_KMS("Assuming no PCH\n"); |
| |
| return id; |
| } |
| |
| static void intel_detect_pch(struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pch = NULL; |
| |
| /* |
| * The reason to probe ISA bridge instead of Dev31:Fun0 is to |
| * make graphics device passthrough work easy for VMM, that only |
| * need to expose ISA bridge to let driver know the real hardware |
| * underneath. This is a requirement from virtualization team. |
| * |
| * In some virtualized environments (e.g. XEN), there is irrelevant |
| * ISA bridge in the system. To work reliably, we should scan trhough |
| * all the ISA bridge devices and check for the first match, instead |
| * of only checking the first one. |
| */ |
| while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) { |
| unsigned short id; |
| enum intel_pch pch_type; |
| |
| if (pch->vendor != PCI_VENDOR_ID_INTEL) |
| continue; |
| |
| id = pch->device & INTEL_PCH_DEVICE_ID_MASK; |
| |
| pch_type = intel_pch_type(dev_priv, id); |
| if (pch_type != PCH_NONE) { |
| dev_priv->pch_type = pch_type; |
| dev_priv->pch_id = id; |
| break; |
| } else if (intel_is_virt_pch(id, pch->subsystem_vendor, |
| pch->subsystem_device)) { |
| id = intel_virt_detect_pch(dev_priv); |
| pch_type = intel_pch_type(dev_priv, id); |
| |
| /* Sanity check virtual PCH id */ |
| if (WARN_ON(id && pch_type == PCH_NONE)) |
| id = 0; |
| |
| dev_priv->pch_type = pch_type; |
| dev_priv->pch_id = id; |
| break; |
| } |
| } |
| |
| /* |
| * Use PCH_NOP (PCH but no South Display) for PCH platforms without |
| * display. |
| */ |
| if (pch && INTEL_INFO(dev_priv)->num_pipes == 0) { |
| DRM_DEBUG_KMS("Display disabled, reverting to NOP PCH\n"); |
| dev_priv->pch_type = PCH_NOP; |
| dev_priv->pch_id = 0; |
| } |
| |
| if (!pch) |
| DRM_DEBUG_KMS("No PCH found.\n"); |
| |
| pci_dev_put(pch); |
| } |
| |
| static int i915_getparam_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| drm_i915_getparam_t *param = data; |
| int value; |
| |
| switch (param->param) { |
| case I915_PARAM_IRQ_ACTIVE: |
| case I915_PARAM_ALLOW_BATCHBUFFER: |
| case I915_PARAM_LAST_DISPATCH: |
| case I915_PARAM_HAS_EXEC_CONSTANTS: |
| /* Reject all old ums/dri params. */ |
| return -ENODEV; |
| case I915_PARAM_CHIPSET_ID: |
| value = pdev->device; |
| break; |
| case I915_PARAM_REVISION: |
| value = pdev->revision; |
| break; |
| case I915_PARAM_NUM_FENCES_AVAIL: |
| value = dev_priv->num_fence_regs; |
| break; |
| case I915_PARAM_HAS_OVERLAY: |
| value = dev_priv->overlay ? 1 : 0; |
| break; |
| case I915_PARAM_HAS_BSD: |
| value = !!dev_priv->engine[VCS]; |
| break; |
| case I915_PARAM_HAS_BLT: |
| value = !!dev_priv->engine[BCS]; |
| break; |
| case I915_PARAM_HAS_VEBOX: |
| value = !!dev_priv->engine[VECS]; |
| break; |
| case I915_PARAM_HAS_BSD2: |
| value = !!dev_priv->engine[VCS2]; |
| break; |
| case I915_PARAM_HAS_LLC: |
| value = HAS_LLC(dev_priv); |
| break; |
| case I915_PARAM_HAS_WT: |
| value = HAS_WT(dev_priv); |
| break; |
| case I915_PARAM_HAS_ALIASING_PPGTT: |
| value = USES_PPGTT(dev_priv); |
| break; |
| case I915_PARAM_HAS_SEMAPHORES: |
| value = HAS_LEGACY_SEMAPHORES(dev_priv); |
| break; |
| case I915_PARAM_HAS_SECURE_BATCHES: |
| value = capable(CAP_SYS_ADMIN); |
| break; |
| case I915_PARAM_CMD_PARSER_VERSION: |
| value = i915_cmd_parser_get_version(dev_priv); |
| break; |
| case I915_PARAM_SUBSLICE_TOTAL: |
| value = sseu_subslice_total(&INTEL_INFO(dev_priv)->sseu); |
| if (!value) |
| return -ENODEV; |
| break; |
| case I915_PARAM_EU_TOTAL: |
| value = INTEL_INFO(dev_priv)->sseu.eu_total; |
| if (!value) |
| return -ENODEV; |
| break; |
| case I915_PARAM_HAS_GPU_RESET: |
| value = i915_modparams.enable_hangcheck && |
| intel_has_gpu_reset(dev_priv); |
| if (value && intel_has_reset_engine(dev_priv)) |
| value = 2; |
| break; |
| case I915_PARAM_HAS_RESOURCE_STREAMER: |
| value = 0; |
| break; |
| case I915_PARAM_HAS_POOLED_EU: |
| value = HAS_POOLED_EU(dev_priv); |
| break; |
| case I915_PARAM_MIN_EU_IN_POOL: |
| value = INTEL_INFO(dev_priv)->sseu.min_eu_in_pool; |
| break; |
| case I915_PARAM_HUC_STATUS: |
| value = intel_huc_check_status(&dev_priv->huc); |
| if (value < 0) |
| return value; |
| break; |
| case I915_PARAM_MMAP_GTT_VERSION: |
| /* Though we've started our numbering from 1, and so class all |
| * earlier versions as 0, in effect their value is undefined as |
| * the ioctl will report EINVAL for the unknown param! |
| */ |
| value = i915_gem_mmap_gtt_version(); |
| break; |
| case I915_PARAM_HAS_SCHEDULER: |
| value = dev_priv->caps.scheduler; |
| break; |
| |
| case I915_PARAM_MMAP_VERSION: |
| /* Remember to bump this if the version changes! */ |
| case I915_PARAM_HAS_GEM: |
| case I915_PARAM_HAS_PAGEFLIPPING: |
| case I915_PARAM_HAS_EXECBUF2: /* depends on GEM */ |
| case I915_PARAM_HAS_RELAXED_FENCING: |
| case I915_PARAM_HAS_COHERENT_RINGS: |
| case I915_PARAM_HAS_RELAXED_DELTA: |
| case I915_PARAM_HAS_GEN7_SOL_RESET: |
| case I915_PARAM_HAS_WAIT_TIMEOUT: |
| case I915_PARAM_HAS_PRIME_VMAP_FLUSH: |
| case I915_PARAM_HAS_PINNED_BATCHES: |
| case I915_PARAM_HAS_EXEC_NO_RELOC: |
| case I915_PARAM_HAS_EXEC_HANDLE_LUT: |
| case I915_PARAM_HAS_COHERENT_PHYS_GTT: |
| case I915_PARAM_HAS_EXEC_SOFTPIN: |
| case I915_PARAM_HAS_EXEC_ASYNC: |
| case I915_PARAM_HAS_EXEC_FENCE: |
| case I915_PARAM_HAS_EXEC_CAPTURE: |
| case I915_PARAM_HAS_EXEC_BATCH_FIRST: |
| case I915_PARAM_HAS_EXEC_FENCE_ARRAY: |
| /* For the time being all of these are always true; |
| * if some supported hardware does not have one of these |
| * features this value needs to be provided from |
| * INTEL_INFO(), a feature macro, or similar. |
| */ |
| value = 1; |
| break; |
| case I915_PARAM_HAS_CONTEXT_ISOLATION: |
| value = intel_engines_has_context_isolation(dev_priv); |
| break; |
| case I915_PARAM_SLICE_MASK: |
| value = INTEL_INFO(dev_priv)->sseu.slice_mask; |
| if (!value) |
| return -ENODEV; |
| break; |
| case I915_PARAM_SUBSLICE_MASK: |
| value = INTEL_INFO(dev_priv)->sseu.subslice_mask[0]; |
| if (!value) |
| return -ENODEV; |
| break; |
| case I915_PARAM_CS_TIMESTAMP_FREQUENCY: |
| value = 1000 * INTEL_INFO(dev_priv)->cs_timestamp_frequency_khz; |
| break; |
| case I915_PARAM_MMAP_GTT_COHERENT: |
| value = INTEL_INFO(dev_priv)->has_coherent_ggtt; |
| break; |
| default: |
| DRM_DEBUG("Unknown parameter %d\n", param->param); |
| return -EINVAL; |
| } |
| |
| if (put_user(value, param->value)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int i915_get_bridge_dev(struct drm_i915_private *dev_priv) |
| { |
| int domain = pci_domain_nr(dev_priv->drm.pdev->bus); |
| |
| dev_priv->bridge_dev = |
| pci_get_domain_bus_and_slot(domain, 0, PCI_DEVFN(0, 0)); |
| if (!dev_priv->bridge_dev) { |
| DRM_ERROR("bridge device not found\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Allocate space for the MCH regs if needed, return nonzero on error */ |
| static int |
| intel_alloc_mchbar_resource(struct drm_i915_private *dev_priv) |
| { |
| int reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp_lo, temp_hi = 0; |
| u64 mchbar_addr; |
| int ret; |
| |
| if (INTEL_GEN(dev_priv) >= 4) |
| pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi); |
| pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo); |
| mchbar_addr = ((u64)temp_hi << 32) | temp_lo; |
| |
| /* If ACPI doesn't have it, assume we need to allocate it ourselves */ |
| #ifdef CONFIG_PNP |
| if (mchbar_addr && |
| pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) |
| return 0; |
| #endif |
| |
| /* Get some space for it */ |
| dev_priv->mch_res.name = "i915 MCHBAR"; |
| dev_priv->mch_res.flags = IORESOURCE_MEM; |
| ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, |
| &dev_priv->mch_res, |
| MCHBAR_SIZE, MCHBAR_SIZE, |
| PCIBIOS_MIN_MEM, |
| 0, pcibios_align_resource, |
| dev_priv->bridge_dev); |
| if (ret) { |
| DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret); |
| dev_priv->mch_res.start = 0; |
| return ret; |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 4) |
| pci_write_config_dword(dev_priv->bridge_dev, reg + 4, |
| upper_32_bits(dev_priv->mch_res.start)); |
| |
| pci_write_config_dword(dev_priv->bridge_dev, reg, |
| lower_32_bits(dev_priv->mch_res.start)); |
| return 0; |
| } |
| |
| /* Setup MCHBAR if possible, return true if we should disable it again */ |
| static void |
| intel_setup_mchbar(struct drm_i915_private *dev_priv) |
| { |
| int mchbar_reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp; |
| bool enabled; |
| |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| return; |
| |
| dev_priv->mchbar_need_disable = false; |
| |
| if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) { |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp); |
| enabled = !!(temp & DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| enabled = temp & 1; |
| } |
| |
| /* If it's already enabled, don't have to do anything */ |
| if (enabled) |
| return; |
| |
| if (intel_alloc_mchbar_resource(dev_priv)) |
| return; |
| |
| dev_priv->mchbar_need_disable = true; |
| |
| /* Space is allocated or reserved, so enable it. */ |
| if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) { |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN, |
| temp | DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1); |
| } |
| } |
| |
| static void |
| intel_teardown_mchbar(struct drm_i915_private *dev_priv) |
| { |
| int mchbar_reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915; |
| |
| if (dev_priv->mchbar_need_disable) { |
| if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) { |
| u32 deven_val; |
| |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN, |
| &deven_val); |
| deven_val &= ~DEVEN_MCHBAR_EN; |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN, |
| deven_val); |
| } else { |
| u32 mchbar_val; |
| |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, |
| &mchbar_val); |
| mchbar_val &= ~1; |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, |
| mchbar_val); |
| } |
| } |
| |
| if (dev_priv->mch_res.start) |
| release_resource(&dev_priv->mch_res); |
| } |
| |
| /* true = enable decode, false = disable decoder */ |
| static unsigned int i915_vga_set_decode(void *cookie, bool state) |
| { |
| struct drm_i915_private *dev_priv = cookie; |
| |
| intel_modeset_vga_set_state(dev_priv, state); |
| if (state) |
| return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM | |
| VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| else |
| return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| } |
| |
| static int i915_resume_switcheroo(struct drm_device *dev); |
| static int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state); |
| |
| static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| pm_message_t pmm = { .event = PM_EVENT_SUSPEND }; |
| |
| if (state == VGA_SWITCHEROO_ON) { |
| pr_info("switched on\n"); |
| dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; |
| /* i915 resume handler doesn't set to D0 */ |
| pci_set_power_state(pdev, PCI_D0); |
| i915_resume_switcheroo(dev); |
| dev->switch_power_state = DRM_SWITCH_POWER_ON; |
| } else { |
| pr_info("switched off\n"); |
| dev->switch_power_state = DRM_SWITCH_POWER_CHANGING; |
| i915_suspend_switcheroo(dev, pmm); |
| dev->switch_power_state = DRM_SWITCH_POWER_OFF; |
| } |
| } |
| |
| static bool i915_switcheroo_can_switch(struct pci_dev *pdev) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| /* |
| * FIXME: open_count is protected by drm_global_mutex but that would lead to |
| * locking inversion with the driver load path. And the access here is |
| * completely racy anyway. So don't bother with locking for now. |
| */ |
| return dev->open_count == 0; |
| } |
| |
| static const struct vga_switcheroo_client_ops i915_switcheroo_ops = { |
| .set_gpu_state = i915_switcheroo_set_state, |
| .reprobe = NULL, |
| .can_switch = i915_switcheroo_can_switch, |
| }; |
| |
| static int i915_load_modeset_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| int ret; |
| |
| if (i915_inject_load_failure()) |
| return -ENODEV; |
| |
| intel_bios_init(dev_priv); |
| |
| /* If we have > 1 VGA cards, then we need to arbitrate access |
| * to the common VGA resources. |
| * |
| * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA), |
| * then we do not take part in VGA arbitration and the |
| * vga_client_register() fails with -ENODEV. |
| */ |
| ret = vga_client_register(pdev, dev_priv, NULL, i915_vga_set_decode); |
| if (ret && ret != -ENODEV) |
| goto out; |
| |
| intel_register_dsm_handler(); |
| |
| ret = vga_switcheroo_register_client(pdev, &i915_switcheroo_ops, false); |
| if (ret) |
| goto cleanup_vga_client; |
| |
| /* must happen before intel_power_domains_init_hw() on VLV/CHV */ |
| intel_update_rawclk(dev_priv); |
| |
| intel_power_domains_init_hw(dev_priv, false); |
| |
| intel_csr_ucode_init(dev_priv); |
| |
| ret = intel_irq_install(dev_priv); |
| if (ret) |
| goto cleanup_csr; |
| |
| intel_setup_gmbus(dev_priv); |
| |
| /* Important: The output setup functions called by modeset_init need |
| * working irqs for e.g. gmbus and dp aux transfers. */ |
| ret = intel_modeset_init(dev); |
| if (ret) |
| goto cleanup_irq; |
| |
| ret = i915_gem_init(dev_priv); |
| if (ret) |
| goto cleanup_modeset; |
| |
| intel_setup_overlay(dev_priv); |
| |
| if (INTEL_INFO(dev_priv)->num_pipes == 0) |
| return 0; |
| |
| ret = intel_fbdev_init(dev); |
| if (ret) |
| goto cleanup_gem; |
| |
| /* Only enable hotplug handling once the fbdev is fully set up. */ |
| intel_hpd_init(dev_priv); |
| |
| return 0; |
| |
| cleanup_gem: |
| if (i915_gem_suspend(dev_priv)) |
| DRM_ERROR("failed to idle hardware; continuing to unload!\n"); |
| i915_gem_fini(dev_priv); |
| cleanup_modeset: |
| intel_modeset_cleanup(dev); |
| cleanup_irq: |
| drm_irq_uninstall(dev); |
| intel_teardown_gmbus(dev_priv); |
| cleanup_csr: |
| intel_csr_ucode_fini(dev_priv); |
| intel_power_domains_fini_hw(dev_priv); |
| vga_switcheroo_unregister_client(pdev); |
| cleanup_vga_client: |
| vga_client_register(pdev, NULL, NULL, NULL); |
| out: |
| return ret; |
| } |
| |
| static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv) |
| { |
| struct apertures_struct *ap; |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| bool primary; |
| int ret; |
| |
| ap = alloc_apertures(1); |
| if (!ap) |
| return -ENOMEM; |
| |
| ap->ranges[0].base = ggtt->gmadr.start; |
| ap->ranges[0].size = ggtt->mappable_end; |
| |
| primary = |
| pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW; |
| |
| ret = drm_fb_helper_remove_conflicting_framebuffers(ap, "inteldrmfb", primary); |
| |
| kfree(ap); |
| |
| return ret; |
| } |
| |
| #if !defined(CONFIG_VGA_CONSOLE) |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| return 0; |
| } |
| #elif !defined(CONFIG_DUMMY_CONSOLE) |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| return -ENODEV; |
| } |
| #else |
| static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv) |
| { |
| int ret = 0; |
| |
| DRM_INFO("Replacing VGA console driver\n"); |
| |
| console_lock(); |
| if (con_is_bound(&vga_con)) |
| ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1); |
| if (ret == 0) { |
| ret = do_unregister_con_driver(&vga_con); |
| |
| /* Ignore "already unregistered". */ |
| if (ret == -ENODEV) |
| ret = 0; |
| } |
| console_unlock(); |
| |
| return ret; |
| } |
| #endif |
| |
| static void intel_init_dpio(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C), |
| * CHV x1 PHY (DP/HDMI D) |
| * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C) |
| */ |
| if (IS_CHERRYVIEW(dev_priv)) { |
| DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2; |
| DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO; |
| } else if (IS_VALLEYVIEW(dev_priv)) { |
| DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO; |
| } |
| } |
| |
| static int i915_workqueues_init(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * The i915 workqueue is primarily used for batched retirement of |
| * requests (and thus managing bo) once the task has been completed |
| * by the GPU. i915_retire_requests() is called directly when we |
| * need high-priority retirement, such as waiting for an explicit |
| * bo. |
| * |
| * It is also used for periodic low-priority events, such as |
| * idle-timers and recording error state. |
| * |
| * All tasks on the workqueue are expected to acquire the dev mutex |
| * so there is no point in running more than one instance of the |
| * workqueue at any time. Use an ordered one. |
| */ |
| dev_priv->wq = alloc_ordered_workqueue("i915", 0); |
| if (dev_priv->wq == NULL) |
| goto out_err; |
| |
| dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0); |
| if (dev_priv->hotplug.dp_wq == NULL) |
| goto out_free_wq; |
| |
| return 0; |
| |
| out_free_wq: |
| destroy_workqueue(dev_priv->wq); |
| out_err: |
| DRM_ERROR("Failed to allocate workqueues.\n"); |
| |
| return -ENOMEM; |
| } |
| |
| static void i915_engines_cleanup(struct drm_i915_private *i915) |
| { |
| struct intel_engine_cs *engine; |
| enum intel_engine_id id; |
| |
| for_each_engine(engine, i915, id) |
| kfree(engine); |
| } |
| |
| static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv) |
| { |
| destroy_workqueue(dev_priv->hotplug.dp_wq); |
| destroy_workqueue(dev_priv->wq); |
| } |
| |
| /* |
| * We don't keep the workarounds for pre-production hardware, so we expect our |
| * driver to fail on these machines in one way or another. A little warning on |
| * dmesg may help both the user and the bug triagers. |
| * |
| * Our policy for removing pre-production workarounds is to keep the |
| * current gen workarounds as a guide to the bring-up of the next gen |
| * (workarounds have a habit of persisting!). Anything older than that |
| * should be removed along with the complications they introduce. |
| */ |
| static void intel_detect_preproduction_hw(struct drm_i915_private *dev_priv) |
| { |
| bool pre = false; |
| |
| pre |= IS_HSW_EARLY_SDV(dev_priv); |
| pre |= IS_SKL_REVID(dev_priv, 0, SKL_REVID_F0); |
| pre |= IS_BXT_REVID(dev_priv, 0, BXT_REVID_B_LAST); |
| |
| if (pre) { |
| DRM_ERROR("This is a pre-production stepping. " |
| "It may not be fully functional.\n"); |
| add_taint(TAINT_MACHINE_CHECK, LOCKDEP_STILL_OK); |
| } |
| } |
| |
| /** |
| * i915_driver_init_early - setup state not requiring device access |
| * @dev_priv: device private |
| * |
| * Initialize everything that is a "SW-only" state, that is state not |
| * requiring accessing the device or exposing the driver via kernel internal |
| * or userspace interfaces. Example steps belonging here: lock initialization, |
| * system memory allocation, setting up device specific attributes and |
| * function hooks not requiring accessing the device. |
| */ |
| static int i915_driver_init_early(struct drm_i915_private *dev_priv) |
| { |
| int ret = 0; |
| |
| if (i915_inject_load_failure()) |
| return -ENODEV; |
| |
| spin_lock_init(&dev_priv->irq_lock); |
| spin_lock_init(&dev_priv->gpu_error.lock); |
| mutex_init(&dev_priv->backlight_lock); |
| spin_lock_init(&dev_priv->uncore.lock); |
| |
| mutex_init(&dev_priv->sb_lock); |
| mutex_init(&dev_priv->av_mutex); |
| mutex_init(&dev_priv->wm.wm_mutex); |
| mutex_init(&dev_priv->pps_mutex); |
| |
| i915_memcpy_init_early(dev_priv); |
| |
| ret = i915_workqueues_init(dev_priv); |
| if (ret < 0) |
| goto err_engines; |
| |
| ret = i915_gem_init_early(dev_priv); |
| if (ret < 0) |
| goto err_workqueues; |
| |
| /* This must be called before any calls to HAS_PCH_* */ |
| intel_detect_pch(dev_priv); |
| |
| intel_wopcm_init_early(&dev_priv->wopcm); |
| intel_uc_init_early(dev_priv); |
| intel_pm_setup(dev_priv); |
| intel_init_dpio(dev_priv); |
| ret = intel_power_domains_init(dev_priv); |
| if (ret < 0) |
| goto err_uc; |
| intel_irq_init(dev_priv); |
| intel_hangcheck_init(dev_priv); |
| intel_init_display_hooks(dev_priv); |
| intel_init_clock_gating_hooks(dev_priv); |
| intel_init_audio_hooks(dev_priv); |
| intel_display_crc_init(dev_priv); |
| |
| intel_detect_preproduction_hw(dev_priv); |
| |
| return 0; |
| |
| err_uc: |
| intel_uc_cleanup_early(dev_priv); |
| i915_gem_cleanup_early(dev_priv); |
| err_workqueues: |
| i915_workqueues_cleanup(dev_priv); |
| err_engines: |
| i915_engines_cleanup(dev_priv); |
| return ret; |
| } |
| |
| /** |
| * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv) |
| { |
| intel_irq_fini(dev_priv); |
| intel_power_domains_cleanup(dev_priv); |
| intel_uc_cleanup_early(dev_priv); |
| i915_gem_cleanup_early(dev_priv); |
| i915_workqueues_cleanup(dev_priv); |
| i915_engines_cleanup(dev_priv); |
| } |
| |
| static int i915_mmio_setup(struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| int mmio_bar; |
| int mmio_size; |
| |
| mmio_bar = IS_GEN2(dev_priv) ? 1 : 0; |
| /* |
| * Before gen4, the registers and the GTT are behind different BARs. |
| * However, from gen4 onwards, the registers and the GTT are shared |
| * in the same BAR, so we want to restrict this ioremap from |
| * clobbering the GTT which we want ioremap_wc instead. Fortunately, |
| * the register BAR remains the same size for all the earlier |
| * generations up to Ironlake. |
| */ |
| if (INTEL_GEN(dev_priv) < 5) |
| mmio_size = 512 * 1024; |
| else |
| mmio_size = 2 * 1024 * 1024; |
| dev_priv->regs = pci_iomap(pdev, mmio_bar, mmio_size); |
| if (dev_priv->regs == NULL) { |
| DRM_ERROR("failed to map registers\n"); |
| |
| return -EIO; |
| } |
| |
| /* Try to make sure MCHBAR is enabled before poking at it */ |
| intel_setup_mchbar(dev_priv); |
| |
| return 0; |
| } |
| |
| static void i915_mmio_cleanup(struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| |
| intel_teardown_mchbar(dev_priv); |
| pci_iounmap(pdev, dev_priv->regs); |
| } |
| |
| /** |
| * i915_driver_init_mmio - setup device MMIO |
| * @dev_priv: device private |
| * |
| * Setup minimal device state necessary for MMIO accesses later in the |
| * initialization sequence. The setup here should avoid any other device-wide |
| * side effects or exposing the driver via kernel internal or user space |
| * interfaces. |
| */ |
| static int i915_driver_init_mmio(struct drm_i915_private *dev_priv) |
| { |
| int ret; |
| |
| if (i915_inject_load_failure()) |
| return -ENODEV; |
| |
| if (i915_get_bridge_dev(dev_priv)) |
| return -EIO; |
| |
| ret = i915_mmio_setup(dev_priv); |
| if (ret < 0) |
| goto err_bridge; |
| |
| intel_uncore_init(dev_priv); |
| |
| intel_device_info_init_mmio(dev_priv); |
| |
| intel_uncore_prune(dev_priv); |
| |
| intel_uc_init_mmio(dev_priv); |
| |
| ret = intel_engines_init_mmio(dev_priv); |
| if (ret) |
| goto err_uncore; |
| |
| i915_gem_init_mmio(dev_priv); |
| |
| return 0; |
| |
| err_uncore: |
| intel_uncore_fini(dev_priv); |
| err_bridge: |
| pci_dev_put(dev_priv->bridge_dev); |
| |
| return ret; |
| } |
| |
| /** |
| * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv) |
| { |
| intel_uncore_fini(dev_priv); |
| i915_mmio_cleanup(dev_priv); |
| pci_dev_put(dev_priv->bridge_dev); |
| } |
| |
| static void intel_sanitize_options(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * i915.enable_ppgtt is read-only, so do an early pass to validate the |
| * user's requested state against the hardware/driver capabilities. We |
| * do this now so that we can print out any log messages once rather |
| * than every time we check intel_enable_ppgtt(). |
| */ |
| i915_modparams.enable_ppgtt = |
| intel_sanitize_enable_ppgtt(dev_priv, |
| i915_modparams.enable_ppgtt); |
| DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915_modparams.enable_ppgtt); |
| |
| intel_gvt_sanitize_options(dev_priv); |
| } |
| |
| static enum dram_rank skl_get_dimm_rank(u8 size, u32 rank) |
| { |
| if (size == 0) |
| return I915_DRAM_RANK_INVALID; |
| if (rank == SKL_DRAM_RANK_SINGLE) |
| return I915_DRAM_RANK_SINGLE; |
| else if (rank == SKL_DRAM_RANK_DUAL) |
| return I915_DRAM_RANK_DUAL; |
| |
| return I915_DRAM_RANK_INVALID; |
| } |
| |
| static bool |
| skl_is_16gb_dimm(enum dram_rank rank, u8 size, u8 width) |
| { |
| if (rank == I915_DRAM_RANK_SINGLE && width == 8 && size == 16) |
| return true; |
| else if (rank == I915_DRAM_RANK_DUAL && width == 8 && size == 32) |
| return true; |
| else if (rank == SKL_DRAM_RANK_SINGLE && width == 16 && size == 8) |
| return true; |
| else if (rank == SKL_DRAM_RANK_DUAL && width == 16 && size == 16) |
| return true; |
| |
| return false; |
| } |
| |
| static int |
| skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val) |
| { |
| u32 tmp_l, tmp_s; |
| u32 s_val = val >> SKL_DRAM_S_SHIFT; |
| |
| if (!val) |
| return -EINVAL; |
| |
| tmp_l = val & SKL_DRAM_SIZE_MASK; |
| tmp_s = s_val & SKL_DRAM_SIZE_MASK; |
| |
| if (tmp_l == 0 && tmp_s == 0) |
| return -EINVAL; |
| |
| ch->l_info.size = tmp_l; |
| ch->s_info.size = tmp_s; |
| |
| tmp_l = (val & SKL_DRAM_WIDTH_MASK) >> SKL_DRAM_WIDTH_SHIFT; |
| tmp_s = (s_val & SKL_DRAM_WIDTH_MASK) >> SKL_DRAM_WIDTH_SHIFT; |
| ch->l_info.width = (1 << tmp_l) * 8; |
| ch->s_info.width = (1 << tmp_s) * 8; |
| |
| tmp_l = val & SKL_DRAM_RANK_MASK; |
| tmp_s = s_val & SKL_DRAM_RANK_MASK; |
| ch->l_info.rank = skl_get_dimm_rank(ch->l_info.size, tmp_l); |
| ch->s_info.rank = skl_get_dimm_rank(ch->s_info.size, tmp_s); |
| |
| if (ch->l_info.rank == I915_DRAM_RANK_DUAL || |
| ch->s_info.rank == I915_DRAM_RANK_DUAL) |
| ch->rank = I915_DRAM_RANK_DUAL; |
| else if (ch->l_info.rank == I915_DRAM_RANK_SINGLE && |
| ch->s_info.rank == I915_DRAM_RANK_SINGLE) |
| ch->rank = I915_DRAM_RANK_DUAL; |
| else |
| ch->rank = I915_DRAM_RANK_SINGLE; |
| |
| ch->is_16gb_dimm = skl_is_16gb_dimm(ch->l_info.rank, ch->l_info.size, |
| ch->l_info.width) || |
| skl_is_16gb_dimm(ch->s_info.rank, ch->s_info.size, |
| ch->s_info.width); |
| |
| DRM_DEBUG_KMS("(size:width:rank) L(%dGB:X%d:%s) S(%dGB:X%d:%s)\n", |
| ch->l_info.size, ch->l_info.width, |
| ch->l_info.rank ? "dual" : "single", |
| ch->s_info.size, ch->s_info.width, |
| ch->s_info.rank ? "dual" : "single"); |
| |
| return 0; |
| } |
| |
| static bool |
| intel_is_dram_symmetric(u32 val_ch0, u32 val_ch1, |
| struct dram_channel_info *ch0) |
| { |
| return (val_ch0 == val_ch1 && |
| (ch0->s_info.size == 0 || |
| (ch0->l_info.size == ch0->s_info.size && |
| ch0->l_info.width == ch0->s_info.width && |
| ch0->l_info.rank == ch0->s_info.rank))); |
| } |
| |
| static int |
| skl_dram_get_channels_info(struct drm_i915_private *dev_priv) |
| { |
| struct dram_info *dram_info = &dev_priv->dram_info; |
| struct dram_channel_info ch0, ch1; |
| u32 val_ch0, val_ch1; |
| int ret; |
| |
| val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN); |
| ret = skl_dram_get_channel_info(&ch0, val_ch0); |
| if (ret == 0) |
| dram_info->num_channels++; |
| |
| val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN); |
| ret = skl_dram_get_channel_info(&ch1, val_ch1); |
| if (ret == 0) |
| dram_info->num_channels++; |
| |
| if (dram_info->num_channels == 0) { |
| DRM_INFO("Number of memory channels is zero\n"); |
| return -EINVAL; |
| } |
| |
| dram_info->valid_dimm = true; |
| |
| /* |
| * If any of the channel is single rank channel, worst case output |
| * will be same as if single rank memory, so consider single rank |
| * memory. |
| */ |
| if (ch0.rank == I915_DRAM_RANK_SINGLE || |
| ch1.rank == I915_DRAM_RANK_SINGLE) |
| dram_info->rank = I915_DRAM_RANK_SINGLE; |
| else |
| dram_info->rank = max(ch0.rank, ch1.rank); |
| |
| if (dram_info->rank == I915_DRAM_RANK_INVALID) { |
| DRM_INFO("couldn't get memory rank information\n"); |
| return -EINVAL; |
| } |
| |
| if (ch0.is_16gb_dimm || ch1.is_16gb_dimm) |
| dram_info->is_16gb_dimm = true; |
| |
| dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0, |
| val_ch1, |
| &ch0); |
| |
| DRM_DEBUG_KMS("memory configuration is %sSymmetric memory\n", |
| dev_priv->dram_info.symmetric_memory ? "" : "not "); |
| return 0; |
| } |
| |
| static int |
| skl_get_dram_info(struct drm_i915_private *dev_priv) |
| { |
| struct dram_info *dram_info = &dev_priv->dram_info; |
| u32 mem_freq_khz, val; |
| int ret; |
| |
| ret = skl_dram_get_channels_info(dev_priv); |
| if (ret) |
| return ret; |
| |
| val = I915_READ(SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU); |
| mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) * |
| SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000); |
| |
| dram_info->bandwidth_kbps = dram_info->num_channels * |
| mem_freq_khz * 8; |
| |
| if (dram_info->bandwidth_kbps == 0) { |
| DRM_INFO("Couldn't get system memory bandwidth\n"); |
| return -EINVAL; |
| } |
| |
| dram_info->valid = true; |
| return 0; |
| } |
| |
| static int |
| bxt_get_dram_info(struct drm_i915_private *dev_priv) |
| { |
| struct dram_info *dram_info = &dev_priv->dram_info; |
| u32 dram_channels; |
| u32 mem_freq_khz, val; |
| u8 num_active_channels; |
| int i; |
| |
| val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0); |
| mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) * |
| BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000); |
| |
| dram_channels = val & BXT_DRAM_CHANNEL_ACTIVE_MASK; |
| num_active_channels = hweight32(dram_channels); |
| |
| /* Each active bit represents 4-byte channel */ |
| dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4); |
| |
| if (dram_info->bandwidth_kbps == 0) { |
| DRM_INFO("Couldn't get system memory bandwidth\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Now read each DUNIT8/9/10/11 to check the rank of each dimms. |
| */ |
| for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) { |
| u8 size, width; |
| enum dram_rank rank; |
| u32 tmp; |
| |
| val = I915_READ(BXT_D_CR_DRP0_DUNIT(i)); |
| if (val == 0xFFFFFFFF) |
| continue; |
| |
| dram_info->num_channels++; |
| tmp = val & BXT_DRAM_RANK_MASK; |
| |
| if (tmp == BXT_DRAM_RANK_SINGLE) |
| rank = I915_DRAM_RANK_SINGLE; |
| else if (tmp == BXT_DRAM_RANK_DUAL) |
| rank = I915_DRAM_RANK_DUAL; |
| else |
| rank = I915_DRAM_RANK_INVALID; |
| |
| tmp = val & BXT_DRAM_SIZE_MASK; |
| if (tmp == BXT_DRAM_SIZE_4GB) |
| size = 4; |
| else if (tmp == BXT_DRAM_SIZE_6GB) |
| size = 6; |
| else if (tmp == BXT_DRAM_SIZE_8GB) |
| size = 8; |
| else if (tmp == BXT_DRAM_SIZE_12GB) |
| size = 12; |
| else if (tmp == BXT_DRAM_SIZE_16GB) |
| size = 16; |
| else |
| size = 0; |
| |
| tmp = (val & BXT_DRAM_WIDTH_MASK) >> BXT_DRAM_WIDTH_SHIFT; |
| width = (1 << tmp) * 8; |
| DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size, |
| width, rank == I915_DRAM_RANK_SINGLE ? "single" : |
| rank == I915_DRAM_RANK_DUAL ? "dual" : "unknown"); |
| |
| /* |
| * If any of the channel is single rank channel, |
| * worst case output will be same as if single rank |
| * memory, so consider single rank memory. |
| */ |
| if (dram_info->rank == I915_DRAM_RANK_INVALID) |
| dram_info->rank = rank; |
| else if (rank == I915_DRAM_RANK_SINGLE) |
| dram_info->rank = I915_DRAM_RANK_SINGLE; |
| } |
| |
| if (dram_info->rank == I915_DRAM_RANK_INVALID) { |
| DRM_INFO("couldn't get memory rank information\n"); |
| return -EINVAL; |
| } |
| |
| dram_info->valid_dimm = true; |
| dram_info->valid = true; |
| return 0; |
| } |
| |
| static void |
| intel_get_dram_info(struct drm_i915_private *dev_priv) |
| { |
| struct dram_info *dram_info = &dev_priv->dram_info; |
| char bandwidth_str[32]; |
| int ret; |
| |
| dram_info->valid = false; |
| dram_info->valid_dimm = false; |
| dram_info->is_16gb_dimm = false; |
| dram_info->rank = I915_DRAM_RANK_INVALID; |
| dram_info->bandwidth_kbps = 0; |
| dram_info->num_channels = 0; |
| |
| if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv)) |
| return; |
| |
| /* Need to calculate bandwidth only for Gen9 */ |
| if (IS_BROXTON(dev_priv)) |
| ret = bxt_get_dram_info(dev_priv); |
| else if (INTEL_GEN(dev_priv) == 9) |
| ret = skl_get_dram_info(dev_priv); |
| else |
| ret = skl_dram_get_channels_info(dev_priv); |
| if (ret) |
| return; |
| |
| if (dram_info->bandwidth_kbps) |
| sprintf(bandwidth_str, "%d KBps", dram_info->bandwidth_kbps); |
| else |
| sprintf(bandwidth_str, "unknown"); |
| DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n", |
| bandwidth_str, dram_info->num_channels); |
| DRM_DEBUG_KMS("DRAM rank: %s rank 16GB-dimm:%s\n", |
| (dram_info->rank == I915_DRAM_RANK_DUAL) ? |
| "dual" : "single", yesno(dram_info->is_16gb_dimm)); |
| } |
| |
| /** |
| * i915_driver_init_hw - setup state requiring device access |
| * @dev_priv: device private |
| * |
| * Setup state that requires accessing the device, but doesn't require |
| * exposing the driver via kernel internal or userspace interfaces. |
| */ |
| static int i915_driver_init_hw(struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| int ret; |
| |
| if (i915_inject_load_failure()) |
| return -ENODEV; |
| |
| intel_device_info_runtime_init(mkwrite_device_info(dev_priv)); |
| |
| intel_sanitize_options(dev_priv); |
| |
| i915_perf_init(dev_priv); |
| |
| ret = i915_ggtt_probe_hw(dev_priv); |
| if (ret) |
| goto err_perf; |
| |
| /* |
| * WARNING: Apparently we must kick fbdev drivers before vgacon, |
| * otherwise the vga fbdev driver falls over. |
| */ |
| ret = i915_kick_out_firmware_fb(dev_priv); |
| if (ret) { |
| DRM_ERROR("failed to remove conflicting framebuffer drivers\n"); |
| goto err_ggtt; |
| } |
| |
| ret = i915_kick_out_vgacon(dev_priv); |
| if (ret) { |
| DRM_ERROR("failed to remove conflicting VGA console\n"); |
| goto err_ggtt; |
| } |
| |
| ret = i915_ggtt_init_hw(dev_priv); |
| if (ret) |
| goto err_ggtt; |
| |
| ret = i915_ggtt_enable_hw(dev_priv); |
| if (ret) { |
| DRM_ERROR("failed to enable GGTT\n"); |
| goto err_ggtt; |
| } |
| |
| pci_set_master(pdev); |
| |
| /* overlay on gen2 is broken and can't address above 1G */ |
| if (IS_GEN2(dev_priv)) { |
| ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(30)); |
| if (ret) { |
| DRM_ERROR("failed to set DMA mask\n"); |
| |
| goto err_ggtt; |
| } |
| } |
| |
| /* 965GM sometimes incorrectly writes to hardware status page (HWS) |
| * using 32bit addressing, overwriting memory if HWS is located |
| * above 4GB. |
| * |
| * The documentation also mentions an issue with undefined |
| * behaviour if any general state is accessed within a page above 4GB, |
| * which also needs to be handled carefully. |
| */ |
| if (IS_I965G(dev_priv) || IS_I965GM(dev_priv)) { |
| ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| |
| if (ret) { |
| DRM_ERROR("failed to set DMA mask\n"); |
| |
| goto err_ggtt; |
| } |
| } |
| |
| pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, |
| PM_QOS_DEFAULT_VALUE); |
| |
| intel_uncore_sanitize(dev_priv); |
| |
| i915_gem_load_init_fences(dev_priv); |
| |
| /* On the 945G/GM, the chipset reports the MSI capability on the |
| * integrated graphics even though the support isn't actually there |
| * according to the published specs. It doesn't appear to function |
| * correctly in testing on 945G. |
| * This may be a side effect of MSI having been made available for PEG |
| * and the registers being closely associated. |
| * |
| * According to chipset errata, on the 965GM, MSI interrupts may |
| * be lost or delayed, and was defeatured. MSI interrupts seem to |
| * get lost on g4x as well, and interrupt delivery seems to stay |
| * properly dead afterwards. So we'll just disable them for all |
| * pre-gen5 chipsets. |
| * |
| * dp aux and gmbus irq on gen4 seems to be able to generate legacy |
| * interrupts even when in MSI mode. This results in spurious |
| * interrupt warnings if the legacy irq no. is shared with another |
| * device. The kernel then disables that interrupt source and so |
| * prevents the other device from working properly. |
| */ |
| if (INTEL_GEN(dev_priv) >= 5) { |
| if (pci_enable_msi(pdev) < 0) |
| DRM_DEBUG_DRIVER("can't enable MSI"); |
| } |
| |
| ret = intel_gvt_init(dev_priv); |
| if (ret) |
| goto err_msi; |
| |
| intel_opregion_setup(dev_priv); |
| /* |
| * Fill the dram structure to get the system raw bandwidth and |
| * dram info. This will be used for memory latency calculation. |
| */ |
| intel_get_dram_info(dev_priv); |
| |
| |
| return 0; |
| |
| err_msi: |
| if (pdev->msi_enabled) |
| pci_disable_msi(pdev); |
| pm_qos_remove_request(&dev_priv->pm_qos); |
| err_ggtt: |
| i915_ggtt_cleanup_hw(dev_priv); |
| err_perf: |
| i915_perf_fini(dev_priv); |
| return ret; |
| } |
| |
| /** |
| * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| |
| i915_perf_fini(dev_priv); |
| |
| if (pdev->msi_enabled) |
| pci_disable_msi(pdev); |
| |
| pm_qos_remove_request(&dev_priv->pm_qos); |
| i915_ggtt_cleanup_hw(dev_priv); |
| } |
| |
| /** |
| * i915_driver_register - register the driver with the rest of the system |
| * @dev_priv: device private |
| * |
| * Perform any steps necessary to make the driver available via kernel |
| * internal or userspace interfaces. |
| */ |
| static void i915_driver_register(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| |
| i915_gem_shrinker_register(dev_priv); |
| i915_pmu_register(dev_priv); |
| |
| /* |
| * Notify a valid surface after modesetting, |
| * when running inside a VM. |
| */ |
| if (intel_vgpu_active(dev_priv)) |
| I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY); |
| |
| /* Reveal our presence to userspace */ |
| if (drm_dev_register(dev, 0) == 0) { |
| i915_debugfs_register(dev_priv); |
| i915_setup_sysfs(dev_priv); |
| |
| /* Depends on sysfs having been initialized */ |
| i915_perf_register(dev_priv); |
| } else |
| DRM_ERROR("Failed to register driver for userspace access!\n"); |
| |
| if (INTEL_INFO(dev_priv)->num_pipes) { |
| /* Must be done after probing outputs */ |
| intel_opregion_register(dev_priv); |
| acpi_video_register(); |
| } |
| |
| if (IS_GEN5(dev_priv)) |
| intel_gpu_ips_init(dev_priv); |
| |
| intel_audio_init(dev_priv); |
| |
| /* |
| * Some ports require correctly set-up hpd registers for detection to |
| * work properly (leading to ghost connected connector status), e.g. VGA |
| * on gm45. Hence we can only set up the initial fbdev config after hpd |
| * irqs are fully enabled. We do it last so that the async config |
| * cannot run before the connectors are registered. |
| */ |
| intel_fbdev_initial_config_async(dev); |
| |
| /* |
| * We need to coordinate the hotplugs with the asynchronous fbdev |
| * configuration, for which we use the fbdev->async_cookie. |
| */ |
| if (INTEL_INFO(dev_priv)->num_pipes) |
| drm_kms_helper_poll_init(dev); |
| |
| intel_power_domains_enable(dev_priv); |
| intel_runtime_pm_enable(dev_priv); |
| } |
| |
| /** |
| * i915_driver_unregister - cleanup the registration done in i915_driver_regiser() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_unregister(struct drm_i915_private *dev_priv) |
| { |
| intel_runtime_pm_disable(dev_priv); |
| intel_power_domains_disable(dev_priv); |
| |
| intel_fbdev_unregister(dev_priv); |
| intel_audio_deinit(dev_priv); |
| |
| /* |
| * After flushing the fbdev (incl. a late async config which will |
| * have delayed queuing of a hotplug event), then flush the hotplug |
| * events. |
| */ |
| drm_kms_helper_poll_fini(&dev_priv->drm); |
| |
| intel_gpu_ips_teardown(); |
| acpi_video_unregister(); |
| intel_opregion_unregister(dev_priv); |
| |
| i915_perf_unregister(dev_priv); |
| i915_pmu_unregister(dev_priv); |
| |
| i915_teardown_sysfs(dev_priv); |
| drm_dev_unregister(&dev_priv->drm); |
| |
| i915_gem_shrinker_unregister(dev_priv); |
| } |
| |
| static void i915_welcome_messages(struct drm_i915_private *dev_priv) |
| { |
| if (drm_debug & DRM_UT_DRIVER) { |
| struct drm_printer p = drm_debug_printer("i915 device info:"); |
| |
| intel_device_info_dump(&dev_priv->info, &p); |
| intel_device_info_dump_runtime(&dev_priv->info, &p); |
| } |
| |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG)) |
| DRM_INFO("DRM_I915_DEBUG enabled\n"); |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)) |
| DRM_INFO("DRM_I915_DEBUG_GEM enabled\n"); |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM)) |
| DRM_INFO("DRM_I915_DEBUG_RUNTIME_PM enabled\n"); |
| } |
| |
| static struct drm_i915_private * |
| i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| const struct intel_device_info *match_info = |
| (struct intel_device_info *)ent->driver_data; |
| struct intel_device_info *device_info; |
| struct drm_i915_private *i915; |
| |
| i915 = kzalloc(sizeof(*i915), GFP_KERNEL); |
| if (!i915) |
| return NULL; |
| |
| if (drm_dev_init(&i915->drm, &driver, &pdev->dev)) { |
| kfree(i915); |
| return NULL; |
| } |
| |
| i915->drm.pdev = pdev; |
| i915->drm.dev_private = i915; |
| pci_set_drvdata(pdev, &i915->drm); |
| |
| /* Setup the write-once "constant" device info */ |
| device_info = mkwrite_device_info(i915); |
| memcpy(device_info, match_info, sizeof(*device_info)); |
| device_info->device_id = pdev->device; |
| |
| BUILD_BUG_ON(INTEL_MAX_PLATFORMS > |
| sizeof(device_info->platform_mask) * BITS_PER_BYTE); |
| BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE); |
| |
| return i915; |
| } |
| |
| static void i915_driver_destroy(struct drm_i915_private *i915) |
| { |
| struct pci_dev *pdev = i915->drm.pdev; |
| |
| drm_dev_fini(&i915->drm); |
| kfree(i915); |
| |
| /* And make sure we never chase our dangling pointer from pci_dev */ |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| /** |
| * i915_driver_load - setup chip and create an initial config |
| * @pdev: PCI device |
| * @ent: matching PCI ID entry |
| * |
| * The driver load routine has to do several things: |
| * - drive output discovery via intel_modeset_init() |
| * - initialize the memory manager |
| * - allocate initial config memory |
| * - setup the DRM framebuffer with the allocated memory |
| */ |
| int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| const struct intel_device_info *match_info = |
| (struct intel_device_info *)ent->driver_data; |
| struct drm_i915_private *dev_priv; |
| int ret; |
| |
| dev_priv = i915_driver_create(pdev, ent); |
| if (!dev_priv) |
| return -ENOMEM; |
| |
| /* Disable nuclear pageflip by default on pre-ILK */ |
| if (!i915_modparams.nuclear_pageflip && match_info->gen < 5) |
| dev_priv->drm.driver_features &= ~DRIVER_ATOMIC; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) |
| goto out_fini; |
| |
| ret = i915_driver_init_early(dev_priv); |
| if (ret < 0) |
| goto out_pci_disable; |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| ret = i915_driver_init_mmio(dev_priv); |
| if (ret < 0) |
| goto out_runtime_pm_put; |
| |
| ret = i915_driver_init_hw(dev_priv); |
| if (ret < 0) |
| goto out_cleanup_mmio; |
| |
| /* |
| * TODO: move the vblank init and parts of modeset init steps into one |
| * of the i915_driver_init_/i915_driver_register functions according |
| * to the role/effect of the given init step. |
| */ |
| if (INTEL_INFO(dev_priv)->num_pipes) { |
| ret = drm_vblank_init(&dev_priv->drm, |
| INTEL_INFO(dev_priv)->num_pipes); |
| if (ret) |
| goto out_cleanup_hw; |
| } |
| |
| ret = i915_load_modeset_init(&dev_priv->drm); |
| if (ret < 0) |
| goto out_cleanup_hw; |
| |
| i915_driver_register(dev_priv); |
| |
| intel_init_ipc(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| i915_welcome_messages(dev_priv); |
| |
| return 0; |
| |
| out_cleanup_hw: |
| i915_driver_cleanup_hw(dev_priv); |
| out_cleanup_mmio: |
| i915_driver_cleanup_mmio(dev_priv); |
| out_runtime_pm_put: |
| enable_rpm_wakeref_asserts(dev_priv); |
| i915_driver_cleanup_early(dev_priv); |
| out_pci_disable: |
| pci_disable_device(pdev); |
| out_fini: |
| i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret); |
| i915_driver_destroy(dev_priv); |
| return ret; |
| } |
| |
| void i915_driver_unload(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| i915_driver_unregister(dev_priv); |
| |
| if (i915_gem_suspend(dev_priv)) |
| DRM_ERROR("failed to idle hardware; continuing to unload!\n"); |
| |
| drm_atomic_helper_shutdown(dev); |
| |
| intel_gvt_cleanup(dev_priv); |
| |
| intel_modeset_cleanup(dev); |
| |
| intel_bios_cleanup(dev_priv); |
| |
| vga_switcheroo_unregister_client(pdev); |
| vga_client_register(pdev, NULL, NULL, NULL); |
| |
| intel_csr_ucode_fini(dev_priv); |
| |
| /* Free error state after interrupts are fully disabled. */ |
| cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); |
| i915_reset_error_state(dev_priv); |
| |
| i915_gem_fini(dev_priv); |
| intel_fbc_cleanup_cfb(dev_priv); |
| |
| intel_power_domains_fini_hw(dev_priv); |
| |
| i915_driver_cleanup_hw(dev_priv); |
| i915_driver_cleanup_mmio(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| WARN_ON(atomic_read(&dev_priv->runtime_pm.wakeref_count)); |
| } |
| |
| static void i915_driver_release(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| i915_driver_cleanup_early(dev_priv); |
| i915_driver_destroy(dev_priv); |
| } |
| |
| static int i915_driver_open(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_private *i915 = to_i915(dev); |
| int ret; |
| |
| ret = i915_gem_open(i915, file); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * i915_driver_lastclose - clean up after all DRM clients have exited |
| * @dev: DRM device |
| * |
| * Take care of cleaning up after all DRM clients have exited. In the |
| * mode setting case, we want to restore the kernel's initial mode (just |
| * in case the last client left us in a bad state). |
| * |
| * Additionally, in the non-mode setting case, we'll tear down the GTT |
| * and DMA structures, since the kernel won't be using them, and clea |
| * up any GEM state. |
| */ |
| static void i915_driver_lastclose(struct drm_device *dev) |
| { |
| intel_fbdev_restore_mode(dev); |
| vga_switcheroo_process_delayed_switch(); |
| } |
| |
| static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_context_close(file); |
| i915_gem_release(dev, file); |
| mutex_unlock(&dev->struct_mutex); |
| |
| kfree(file_priv); |
| } |
| |
| static void intel_suspend_encoders(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct intel_encoder *encoder; |
| |
| drm_modeset_lock_all(dev); |
| for_each_intel_encoder(dev, encoder) |
| if (encoder->suspend) |
| encoder->suspend(encoder); |
| drm_modeset_unlock_all(dev); |
| } |
| |
| static int vlv_resume_prepare(struct drm_i915_private *dev_priv, |
| bool rpm_resume); |
| static int vlv_suspend_complete(struct drm_i915_private *dev_priv); |
| |
| static bool suspend_to_idle(struct drm_i915_private *dev_priv) |
| { |
| #if IS_ENABLED(CONFIG_ACPI_SLEEP) |
| if (acpi_target_system_state() < ACPI_STATE_S3) |
| return true; |
| #endif |
| return false; |
| } |
| |
| static int i915_drm_prepare(struct drm_device *dev) |
| { |
| struct drm_i915_private *i915 = to_i915(dev); |
| int err; |
| |
| /* |
| * NB intel_display_suspend() may issue new requests after we've |
| * ostensibly marked the GPU as ready-to-sleep here. We need to |
| * split out that work and pull it forward so that after point, |
| * the GPU is not woken again. |
| */ |
| err = i915_gem_suspend(i915); |
| if (err) |
| dev_err(&i915->drm.pdev->dev, |
| "GEM idle failed, suspend/resume might fail\n"); |
| |
| return err; |
| } |
| |
| static int i915_drm_suspend(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| pci_power_t opregion_target_state; |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| /* We do a lot of poking in a lot of registers, make sure they work |
| * properly. */ |
| intel_power_domains_disable(dev_priv); |
| |
| drm_kms_helper_poll_disable(dev); |
| |
| pci_save_state(pdev); |
| |
| intel_display_suspend(dev); |
| |
| intel_dp_mst_suspend(dev_priv); |
| |
| intel_runtime_pm_disable_interrupts(dev_priv); |
| intel_hpd_cancel_work(dev_priv); |
| |
| intel_suspend_encoders(dev_priv); |
| |
| intel_suspend_hw(dev_priv); |
| |
| i915_gem_suspend_gtt_mappings(dev_priv); |
| |
| i915_save_state(dev_priv); |
| |
| opregion_target_state = suspend_to_idle(dev_priv) ? PCI_D1 : PCI_D3cold; |
| intel_opregion_notify_adapter(dev_priv, opregion_target_state); |
| |
| intel_opregion_unregister(dev_priv); |
| |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true); |
| |
| dev_priv->suspend_count++; |
| |
| intel_csr_ucode_suspend(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return 0; |
| } |
| |
| static enum i915_drm_suspend_mode |
| get_suspend_mode(struct drm_i915_private *dev_priv, bool hibernate) |
| { |
| if (hibernate) |
| return I915_DRM_SUSPEND_HIBERNATE; |
| |
| if (suspend_to_idle(dev_priv)) |
| return I915_DRM_SUSPEND_IDLE; |
| |
| return I915_DRM_SUSPEND_MEM; |
| } |
| |
| static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| int ret; |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| i915_gem_suspend_late(dev_priv); |
| |
| intel_uncore_suspend(dev_priv); |
| |
| intel_power_domains_suspend(dev_priv, |
| get_suspend_mode(dev_priv, hibernation)); |
| |
| ret = 0; |
| if (IS_GEN9_LP(dev_priv)) |
| bxt_enable_dc9(dev_priv); |
| else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) |
| hsw_enable_pc8(dev_priv); |
| else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| ret = vlv_suspend_complete(dev_priv); |
| |
| if (ret) { |
| DRM_ERROR("Suspend complete failed: %d\n", ret); |
| intel_power_domains_resume(dev_priv); |
| |
| goto out; |
| } |
| |
| pci_disable_device(pdev); |
| /* |
| * During hibernation on some platforms the BIOS may try to access |
| * the device even though it's already in D3 and hang the machine. So |
| * leave the device in D0 on those platforms and hope the BIOS will |
| * power down the device properly. The issue was seen on multiple old |
| * GENs with different BIOS vendors, so having an explicit blacklist |
| * is inpractical; apply the workaround on everything pre GEN6. The |
| * platforms where the issue was seen: |
| * Lenovo Thinkpad X301, X61s, X60, T60, X41 |
| * Fujitsu FSC S7110 |
| * Acer Aspire 1830T |
| */ |
| if (!(hibernation && INTEL_GEN(dev_priv) < 6)) |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| out: |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state) |
| { |
| int error; |
| |
| if (!dev) { |
| DRM_ERROR("dev: %p\n", dev); |
| DRM_ERROR("DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (WARN_ON_ONCE(state.event != PM_EVENT_SUSPEND && |
| state.event != PM_EVENT_FREEZE)) |
| return -EINVAL; |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| error = i915_drm_suspend(dev); |
| if (error) |
| return error; |
| |
| return i915_drm_suspend_late(dev, false); |
| } |
| |
| static int i915_drm_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int ret; |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| intel_sanitize_gt_powersave(dev_priv); |
| |
| i915_gem_sanitize(dev_priv); |
| |
| ret = i915_ggtt_enable_hw(dev_priv); |
| if (ret) |
| DRM_ERROR("failed to re-enable GGTT\n"); |
| |
| intel_csr_ucode_resume(dev_priv); |
| |
| i915_restore_state(dev_priv); |
| intel_pps_unlock_regs_wa(dev_priv); |
| intel_opregion_setup(dev_priv); |
| |
| intel_init_pch_refclk(dev_priv); |
| |
| /* |
| * Interrupts have to be enabled before any batches are run. If not the |
| * GPU will hang. i915_gem_init_hw() will initiate batches to |
| * update/restore the context. |
| * |
| * drm_mode_config_reset() needs AUX interrupts. |
| * |
| * Modeset enabling in intel_modeset_init_hw() also needs working |
| * interrupts. |
| */ |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| drm_mode_config_reset(dev); |
| |
| i915_gem_resume(dev_priv); |
| |
| intel_modeset_init_hw(dev); |
| intel_init_clock_gating(dev_priv); |
| |
| spin_lock_irq(&dev_priv->irq_lock); |
| if (dev_priv->display.hpd_irq_setup) |
| dev_priv->display.hpd_irq_setup(dev_priv); |
| spin_unlock_irq(&dev_priv->irq_lock); |
| |
| intel_dp_mst_resume(dev_priv); |
| |
| intel_display_resume(dev); |
| |
| drm_kms_helper_poll_enable(dev); |
| |
| /* |
| * ... but also need to make sure that hotplug processing |
| * doesn't cause havoc. Like in the driver load code we don't |
| * bother with the tiny race here where we might lose hotplug |
| * notifications. |
| * */ |
| intel_hpd_init(dev_priv); |
| |
| intel_opregion_register(dev_priv); |
| |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false); |
| |
| intel_opregion_notify_adapter(dev_priv, PCI_D0); |
| |
| intel_power_domains_enable(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return 0; |
| } |
| |
| static int i915_drm_resume_early(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| int ret; |
| |
| /* |
| * We have a resume ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an early |
| * resume hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| |
| /* |
| * Note that we need to set the power state explicitly, since we |
| * powered off the device during freeze and the PCI core won't power |
| * it back up for us during thaw. Powering off the device during |
| * freeze is not a hard requirement though, and during the |
| * suspend/resume phases the PCI core makes sure we get here with the |
| * device powered on. So in case we change our freeze logic and keep |
| * the device powered we can also remove the following set power state |
| * call. |
| */ |
| ret = pci_set_power_state(pdev, PCI_D0); |
| if (ret) { |
| DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Note that pci_enable_device() first enables any parent bridge |
| * device and only then sets the power state for this device. The |
| * bridge enabling is a nop though, since bridge devices are resumed |
| * first. The order of enabling power and enabling the device is |
| * imposed by the PCI core as described above, so here we preserve the |
| * same order for the freeze/thaw phases. |
| * |
| * TODO: eventually we should remove pci_disable_device() / |
| * pci_enable_enable_device() from suspend/resume. Due to how they |
| * depend on the device enable refcount we can't anyway depend on them |
| * disabling/enabling the device. |
| */ |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| |
| pci_set_master(pdev); |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| ret = vlv_resume_prepare(dev_priv, false); |
| if (ret) |
| DRM_ERROR("Resume prepare failed: %d, continuing anyway\n", |
| ret); |
| |
| intel_uncore_resume_early(dev_priv); |
| |
| if (IS_GEN9_LP(dev_priv)) { |
| gen9_sanitize_dc_state(dev_priv); |
| bxt_disable_dc9(dev_priv); |
| } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { |
| hsw_disable_pc8(dev_priv); |
| } |
| |
| intel_uncore_sanitize(dev_priv); |
| |
| intel_power_domains_resume(dev_priv); |
| |
| intel_engines_sanitize(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| static int i915_resume_switcheroo(struct drm_device *dev) |
| { |
| int ret; |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| ret = i915_drm_resume_early(dev); |
| if (ret) |
| return ret; |
| |
| return i915_drm_resume(dev); |
| } |
| |
| /** |
| * i915_reset - reset chip after a hang |
| * @i915: #drm_i915_private to reset |
| * @stalled_mask: mask of the stalled engines with the guilty requests |
| * @reason: user error message for why we are resetting |
| * |
| * Reset the chip. Useful if a hang is detected. Marks the device as wedged |
| * on failure. |
| * |
| * Caller must hold the struct_mutex. |
| * |
| * Procedure is fairly simple: |
| * - reset the chip using the reset reg |
| * - re-init context state |
| * - re-init hardware status page |
| * - re-init ring buffer |
| * - re-init interrupt state |
| * - re-init display |
| */ |
| void i915_reset(struct drm_i915_private *i915, |
| unsigned int stalled_mask, |
| const char *reason) |
| { |
| struct i915_gpu_error *error = &i915->gpu_error; |
| int ret; |
| int i; |
| |
| GEM_TRACE("flags=%lx\n", error->flags); |
| |
| might_sleep(); |
| lockdep_assert_held(&i915->drm.struct_mutex); |
| GEM_BUG_ON(!test_bit(I915_RESET_BACKOFF, &error->flags)); |
| |
| if (!test_bit(I915_RESET_HANDOFF, &error->flags)) |
| return; |
| |
| /* Clear any previous failed attempts at recovery. Time to try again. */ |
| if (!i915_gem_unset_wedged(i915)) |
| goto wakeup; |
| |
| if (reason) |
| dev_notice(i915->drm.dev, "Resetting chip for %s\n", reason); |
| error->reset_count++; |
| |
| ret = i915_gem_reset_prepare(i915); |
| if (ret) { |
| dev_err(i915->drm.dev, "GPU recovery failed\n"); |
| goto taint; |
| } |
| |
| if (!intel_has_gpu_reset(i915)) { |
| if (i915_modparams.reset) |
| dev_err(i915->drm.dev, "GPU reset not supported\n"); |
| else |
| DRM_DEBUG_DRIVER("GPU reset disabled\n"); |
| goto error; |
| } |
| |
| for (i = 0; i < 3; i++) { |
| ret = intel_gpu_reset(i915, ALL_ENGINES); |
| if (ret == 0) |
| break; |
| |
| msleep(100); |
| } |
| if (ret) { |
| dev_err(i915->drm.dev, "Failed to reset chip\n"); |
| goto taint; |
| } |
| |
| /* Ok, now get things going again... */ |
| |
| /* |
| * Everything depends on having the GTT running, so we need to start |
| * there. |
| */ |
| ret = i915_ggtt_enable_hw(i915); |
| if (ret) { |
| DRM_ERROR("Failed to re-enable GGTT following reset (%d)\n", |
| ret); |
| goto error; |
| } |
| |
| i915_gem_reset(i915, stalled_mask); |
| intel_overlay_reset(i915); |
| |
| /* |
| * Next we need to restore the context, but we don't use those |
| * yet either... |
| * |
| * Ring buffer needs to be re-initialized in the KMS case, or if X |
| * was running at the time of the reset (i.e. we weren't VT |
| * switched away). |
| */ |
| ret = i915_gem_init_hw(i915); |
| if (ret) { |
| DRM_ERROR("Failed to initialise HW following reset (%d)\n", |
| ret); |
| goto error; |
| } |
| |
| i915_queue_hangcheck(i915); |
| |
| finish: |
| i915_gem_reset_finish(i915); |
| wakeup: |
| clear_bit(I915_RESET_HANDOFF, &error->flags); |
| wake_up_bit(&error->flags, I915_RESET_HANDOFF); |
| return; |
| |
| taint: |
| /* |
| * History tells us that if we cannot reset the GPU now, we |
| * never will. This then impacts everything that is run |
| * subsequently. On failing the reset, we mark the driver |
| * as wedged, preventing further execution on the GPU. |
| * We also want to go one step further and add a taint to the |
| * kernel so that any subsequent faults can be traced back to |
| * this failure. This is important for CI, where if the |
| * GPU/driver fails we would like to reboot and restart testing |
| * rather than continue on into oblivion. For everyone else, |
| * the system should still plod along, but they have been warned! |
| */ |
| add_taint(TAINT_WARN, LOCKDEP_STILL_OK); |
| error: |
| i915_gem_set_wedged(i915); |
| i915_retire_requests(i915); |
| goto finish; |
| } |
| |
| static inline int intel_gt_reset_engine(struct drm_i915_private *dev_priv, |
| struct intel_engine_cs *engine) |
| { |
| return intel_gpu_reset(dev_priv, intel_engine_flag(engine)); |
| } |
| |
| /** |
| * i915_reset_engine - reset GPU engine to recover from a hang |
| * @engine: engine to reset |
| * @msg: reason for GPU reset; or NULL for no dev_notice() |
| * |
| * Reset a specific GPU engine. Useful if a hang is detected. |
| * Returns zero on successful reset or otherwise an error code. |
| * |
| * Procedure is: |
| * - identifies the request that caused the hang and it is dropped |
| * - reset engine (which will force the engine to idle) |
| * - re-init/configure engine |
| */ |
| int i915_reset_engine(struct intel_engine_cs *engine, const char *msg) |
| { |
| struct i915_gpu_error *error = &engine->i915->gpu_error; |
| struct i915_request *active_request; |
| int ret; |
| |
| GEM_TRACE("%s flags=%lx\n", engine->name, error->flags); |
| GEM_BUG_ON(!test_bit(I915_RESET_ENGINE + engine->id, &error->flags)); |
| |
| active_request = i915_gem_reset_prepare_engine(engine); |
| if (IS_ERR_OR_NULL(active_request)) { |
| /* Either the previous reset failed, or we pardon the reset. */ |
| ret = PTR_ERR(active_request); |
| goto out; |
| } |
| |
| if (msg) |
| dev_notice(engine->i915->drm.dev, |
| "Resetting %s for %s\n", engine->name, msg); |
| error->reset_engine_count[engine->id]++; |
| |
| if (!engine->i915->guc.execbuf_client) |
| ret = intel_gt_reset_engine(engine->i915, engine); |
| else |
| ret = intel_guc_reset_engine(&engine->i915->guc, engine); |
| if (ret) { |
| /* If we fail here, we expect to fallback to a global reset */ |
| DRM_DEBUG_DRIVER("%sFailed to reset %s, ret=%d\n", |
| engine->i915->guc.execbuf_client ? "GuC " : "", |
| engine->name, ret); |
| goto out; |
| } |
| |
| /* |
| * The request that caused the hang is stuck on elsp, we know the |
| * active request and can drop it, adjust head to skip the offending |
| * request to resume executing remaining requests in the queue. |
| */ |
| i915_gem_reset_engine(engine, active_request, true); |
| |
| /* |
| * The engine and its registers (and workarounds in case of render) |
| * have been reset to their default values. Follow the init_ring |
| * process to program RING_MODE, HWSP and re-enable submission. |
| */ |
| ret = engine->init_hw(engine); |
| if (ret) |
| goto out; |
| |
| out: |
| intel_engine_cancel_stop_cs(engine); |
| i915_gem_reset_finish_engine(engine); |
| return ret; |
| } |
| |
| static int i915_pm_prepare(struct device *kdev) |
| { |
| struct pci_dev *pdev = to_pci_dev(kdev); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| if (!dev) { |
| dev_err(kdev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_prepare(dev); |
| } |
| |
| static int i915_pm_suspend(struct device *kdev) |
| { |
| struct pci_dev *pdev = to_pci_dev(kdev); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| if (!dev) { |
| dev_err(kdev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend(dev); |
| } |
| |
| static int i915_pm_suspend_late(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| |
| /* |
| * We have a suspend ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an late |
| * suspend hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend_late(dev, false); |
| } |
| |
| static int i915_pm_poweroff_late(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend_late(dev, true); |
| } |
| |
| static int i915_pm_resume_early(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_resume_early(dev); |
| } |
| |
| static int i915_pm_resume(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| |
| if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_resume(dev); |
| } |
| |
| /* freeze: before creating the hibernation_image */ |
| static int i915_pm_freeze(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| int ret; |
| |
| if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) { |
| ret = i915_drm_suspend(dev); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_gem_freeze(kdev_to_i915(kdev)); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int i915_pm_freeze_late(struct device *kdev) |
| { |
| struct drm_device *dev = &kdev_to_i915(kdev)->drm; |
| int ret; |
| |
| if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) { |
| ret = i915_drm_suspend_late(dev, true); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_gem_freeze_late(kdev_to_i915(kdev)); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* thaw: called after creating the hibernation image, but before turning off. */ |
| static int i915_pm_thaw_early(struct device *kdev) |
| { |
| return i915_pm_resume_early(kdev); |
| } |
| |
| static int i915_pm_thaw(struct device *kdev) |
| { |
| return i915_pm_resume(kdev); |
| } |
| |
| /* restore: called after loading the hibernation image. */ |
| static int i915_pm_restore_early(struct device *kdev) |
| { |
| return i915_pm_resume_early(kdev); |
| } |
| |
| static int i915_pm_restore(struct device *kdev) |
| { |
| return i915_pm_resume(kdev); |
| } |
| |
| /* |
| * Save all Gunit registers that may be lost after a D3 and a subsequent |
| * S0i[R123] transition. The list of registers needing a save/restore is |
| * defined in the VLV2_S0IXRegs document. This documents marks all Gunit |
| * registers in the following way: |
| * - Driver: saved/restored by the driver |
| * - Punit : saved/restored by the Punit firmware |
| * - No, w/o marking: no need to save/restore, since the register is R/O or |
| * used internally by the HW in a way that doesn't depend |
| * keeping the content across a suspend/resume. |
| * - Debug : used for debugging |
| * |
| * We save/restore all registers marked with 'Driver', with the following |
| * exceptions: |
| * - Registers out of use, including also registers marked with 'Debug'. |
| * These have no effect on the driver's operation, so we don't save/restore |
| * them to reduce the overhead. |
| * - Registers that are fully setup by an initialization function called from |
| * the resume path. For example many clock gating and RPS/RC6 registers. |
| * - Registers that provide the right functionality with their reset defaults. |
| * |
| * TODO: Except for registers that based on the above 3 criteria can be safely |
| * ignored, we save/restore all others, practically treating the HW context as |
| * a black-box for the driver. Further investigation is needed to reduce the |
| * saved/restored registers even further, by following the same 3 criteria. |
| */ |
| static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv) |
| { |
| struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state; |
| int i; |
| |
| /* GAM 0x4000-0x4770 */ |
| s->wr_watermark = I915_READ(GEN7_WR_WATERMARK); |
| s->gfx_prio_ctrl = I915_READ(GEN7_GFX_PRIO_CTRL); |
| s->arb_mode = I915_READ(ARB_MODE); |
| s->gfx_pend_tlb0 = I915_READ(GEN7_GFX_PEND_TLB0); |
| s->gfx_pend_tlb1 = I915_READ(GEN7_GFX_PEND_TLB1); |
| |
| for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++) |
| s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS(i)); |
| |
| s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT); |
| s->gfx_max_req_count = I915_READ(GEN7_GFX_MAX_REQ_COUNT); |
| |
| s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7); |
| s->ecochk = I915_READ(GAM_ECOCHK); |
| s->bsd_hwsp = I915_READ(BSD_HWS_PGA_GEN7); |
| s->blt_hwsp = I915_READ(BLT_HWS_PGA_GEN7); |
| |
| s->tlb_rd_addr = I915_READ(GEN7_TLB_RD_ADDR); |
| |
| /* MBC 0x9024-0x91D0, 0x8500 */ |
| s->g3dctl = I915_READ(VLV_G3DCTL); |
| s->gsckgctl = I915_READ(VLV_GSCKGCTL); |
| s->mbctl = I915_READ(GEN6_MBCTL); |
| |
| /* GCP 0x9400-0x9424, 0x8100-0x810C */ |
| s->ucgctl1 = I915_READ(GEN6_UCGCTL1); |
| s->ucgctl3 = I915_READ(GEN6_UCGCTL3); |
| s->rcgctl1 = I915_READ(GEN6_RCGCTL1); |
| s->rcgctl2 = I915_READ(GEN6_RCGCTL2); |
| s->rstctl = I915_READ(GEN6_RSTCTL); |
| s->misccpctl = I915_READ(GEN7_MISCCPCTL); |
| |
| /* GPM 0xA000-0xAA84, 0x8000-0x80FC */ |
| s->gfxpause = I915_READ(GEN6_GFXPAUSE); |
| s->rpdeuhwtc = I915_READ(GEN6_RPDEUHWTC); |
| s->rpdeuc = I915_READ(GEN6_RPDEUC); |
| s->ecobus = I915_READ(ECOBUS); |
| s->pwrdwnupctl = I915_READ(VLV_PWRDWNUPCTL); |
| s->rp_down_timeout = I915_READ(GEN6_RP_DOWN_TIMEOUT); |
| s->rp_deucsw = I915_READ(GEN6_RPDEUCSW); |
| s->rcubmabdtmr = I915_READ(GEN6_RCUBMABDTMR); |
| s->rcedata = I915_READ(VLV_RCEDATA); |
| s->spare2gh = I915_READ(VLV_SPAREG2H); |
| |
| /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */ |
| s->gt_imr = I915_READ(GTIMR); |
| s->gt_ier = I915_READ(GTIER); |
| s->pm_imr = I915_READ(GEN6_PMIMR); |
| s->pm_ier = I915_READ(GEN6_PMIER); |
| |
| for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++) |
| s->gt_scratch[i] = I915_READ(GEN7_GT_SCRATCH(i)); |
| |
| /* GT SA CZ domain, 0x100000-0x138124 */ |
| s->tilectl = I915_READ(TILECTL); |
| s->gt_fifoctl = I915_READ(GTFIFOCTL); |
| s->gtlc_wake_ctrl = I915_READ(VLV_GTLC_WAKE_CTRL); |
| s->gtlc_survive = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| s->pmwgicz = I915_READ(VLV_PMWGICZ); |
| |
| /* Gunit-Display CZ domain, 0x182028-0x1821CF */ |
| s->gu_ctl0 = I915_READ(VLV_GU_CTL0); |
| s->gu_ctl1 = I915_READ(VLV_GU_CTL1); |
| s->pcbr = I915_READ(VLV_PCBR); |
| s->clock_gate_dis2 = I915_READ(VLV_GUNIT_CLOCK_GATE2); |
| |
| /* |
| * Not saving any of: |
| * DFT, 0x9800-0x9EC0 |
| * SARB, 0xB000-0xB1FC |
| * GAC, 0x5208-0x524C, 0x14000-0x14C000 |
| * PCI CFG |
| */ |
| } |
| |
| static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv) |
| { |
| struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state; |
| u32 val; |
| int i; |
| |
| /* GAM 0x4000-0x4770 */ |
| I915_WRITE(GEN7_WR_WATERMARK, s->wr_watermark); |
| I915_WRITE(GEN7_GFX_PRIO_CTRL, s->gfx_prio_ctrl); |
| I915_WRITE(ARB_MODE, s->arb_mode | (0xffff << 16)); |
| I915_WRITE(GEN7_GFX_PEND_TLB0, s->gfx_pend_tlb0); |
| I915_WRITE(GEN7_GFX_PEND_TLB1, s->gfx_pend_tlb1); |
| |
| for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++) |
| I915_WRITE(GEN7_LRA_LIMITS(i), s->lra_limits[i]); |
| |
| I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count); |
| I915_WRITE(GEN7_GFX_MAX_REQ_COUNT, s->gfx_max_req_count); |
| |
| I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp); |
| I915_WRITE(GAM_ECOCHK, s->ecochk); |
| I915_WRITE(BSD_HWS_PGA_GEN7, s->bsd_hwsp); |
| I915_WRITE(BLT_HWS_PGA_GEN7, s->blt_hwsp); |
| |
| I915_WRITE(GEN7_TLB_RD_ADDR, s->tlb_rd_addr); |
| |
| /* MBC 0x9024-0x91D0, 0x8500 */ |
| I915_WRITE(VLV_G3DCTL, s->g3dctl); |
| I915_WRITE(VLV_GSCKGCTL, s->gsckgctl); |
| I915_WRITE(GEN6_MBCTL, s->mbctl); |
| |
| /* GCP 0x9400-0x9424, 0x8100-0x810C */ |
| I915_WRITE(GEN6_UCGCTL1, s->ucgctl1); |
| I915_WRITE(GEN6_UCGCTL3, s->ucgctl3); |
| I915_WRITE(GEN6_RCGCTL1, s->rcgctl1); |
| I915_WRITE(GEN6_RCGCTL2, s->rcgctl2); |
| I915_WRITE(GEN6_RSTCTL, s->rstctl); |
| I915_WRITE(GEN7_MISCCPCTL, s->misccpctl); |
| |
| /* GPM 0xA000-0xAA84, 0x8000-0x80FC */ |
| I915_WRITE(GEN6_GFXPAUSE, s->gfxpause); |
| I915_WRITE(GEN6_RPDEUHWTC, s->rpdeuhwtc); |
| I915_WRITE(GEN6_RPDEUC, s->rpdeuc); |
| I915_WRITE(ECOBUS, s->ecobus); |
| I915_WRITE(VLV_PWRDWNUPCTL, s->pwrdwnupctl); |
| I915_WRITE(GEN6_RP_DOWN_TIMEOUT,s->rp_down_timeout); |
| I915_WRITE(GEN6_RPDEUCSW, s->rp_deucsw); |
| I915_WRITE(GEN6_RCUBMABDTMR, s->rcubmabdtmr); |
| I915_WRITE(VLV_RCEDATA, s->rcedata); |
| I915_WRITE(VLV_SPAREG2H, s->spare2gh); |
| |
| /* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */ |
| I915_WRITE(GTIMR, s->gt_imr); |
| I915_WRITE(GTIER, s->gt_ier); |
| I915_WRITE(GEN6_PMIMR, s->pm_imr); |
| I915_WRITE(GEN6_PMIER, s->pm_ier); |
| |
| for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++) |
| I915_WRITE(GEN7_GT_SCRATCH(i), s->gt_scratch[i]); |
| |
| /* GT SA CZ domain, 0x100000-0x138124 */ |
| I915_WRITE(TILECTL, s->tilectl); |
| I915_WRITE(GTFIFOCTL, s->gt_fifoctl); |
| /* |
| * Preserve the GT allow wake and GFX force clock bit, they are not |
| * be restored, as they are used to control the s0ix suspend/resume |
| * sequence by the caller. |
| */ |
| val = I915_READ(VLV_GTLC_WAKE_CTRL); |
| val &= VLV_GTLC_ALLOWWAKEREQ; |
| val |= s->gtlc_wake_ctrl & ~VLV_GTLC_ALLOWWAKEREQ; |
| I915_WRITE(VLV_GTLC_WAKE_CTRL, val); |
| |
| val = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| val &= VLV_GFX_CLK_FORCE_ON_BIT; |
| val |= s->gtlc_survive & ~VLV_GFX_CLK_FORCE_ON_BIT; |
| I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val); |
| |
| I915_WRITE(VLV_PMWGICZ, s->pmwgicz); |
| |
| /* Gunit-Display CZ domain, 0x182028-0x1821CF */ |
| I915_WRITE(VLV_GU_CTL0, s->gu_ctl0); |
| I915_WRITE(VLV_GU_CTL1, s->gu_ctl1); |
| I915_WRITE(VLV_PCBR, s->pcbr); |
| I915_WRITE(VLV_GUNIT_CLOCK_GATE2, s->clock_gate_dis2); |
| } |
| |
| static int vlv_wait_for_pw_status(struct drm_i915_private *dev_priv, |
| u32 mask, u32 val) |
| { |
| /* The HW does not like us polling for PW_STATUS frequently, so |
| * use the sleeping loop rather than risk the busy spin within |
| * intel_wait_for_register(). |
| * |
| * Transitioning between RC6 states should be at most 2ms (see |
| * valleyview_enable_rps) so use a 3ms timeout. |
| */ |
| return wait_for((I915_READ_NOTRACE(VLV_GTLC_PW_STATUS) & mask) == val, |
| 3); |
| } |
| |
| int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on) |
| { |
| u32 val; |
| int err; |
| |
| val = I915_READ(VLV_GTLC_SURVIVABILITY_REG); |
| val &= ~VLV_GFX_CLK_FORCE_ON_BIT; |
| if (force_on) |
| val |= VLV_GFX_CLK_FORCE_ON_BIT; |
| I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val); |
| |
| if (!force_on) |
| return 0; |
| |
| err = intel_wait_for_register(dev_priv, |
| VLV_GTLC_SURVIVABILITY_REG, |
| VLV_GFX_CLK_STATUS_BIT, |
| VLV_GFX_CLK_STATUS_BIT, |
| 20); |
| if (err) |
| DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n", |
| I915_READ(VLV_GTLC_SURVIVABILITY_REG)); |
| |
| return err; |
| } |
| |
| static int vlv_allow_gt_wake(struct drm_i915_private *dev_priv, bool allow) |
| { |
| u32 mask; |
| u32 val; |
| int err; |
| |
| val = I915_READ(VLV_GTLC_WAKE_CTRL); |
| val &= ~VLV_GTLC_ALLOWWAKEREQ; |
| if (allow) |
| val |= VLV_GTLC_ALLOWWAKEREQ; |
| I915_WRITE(VLV_GTLC_WAKE_CTRL, val); |
| POSTING_READ(VLV_GTLC_WAKE_CTRL); |
| |
| mask = VLV_GTLC_ALLOWWAKEACK; |
| val = allow ? mask : 0; |
| |
| err = vlv_wait_for_pw_status(dev_priv, mask, val); |
| if (err) |
| DRM_ERROR("timeout disabling GT waking\n"); |
| |
| return err; |
| } |
| |
| static void vlv_wait_for_gt_wells(struct drm_i915_private *dev_priv, |
| bool wait_for_on) |
| { |
| u32 mask; |
| u32 val; |
| |
| mask = VLV_GTLC_PW_MEDIA_STATUS_MASK | VLV_GTLC_PW_RENDER_STATUS_MASK; |
| val = wait_for_on ? mask : 0; |
| |
| /* |
| * RC6 transitioning can be delayed up to 2 msec (see |
| * valleyview_enable_rps), use 3 msec for safety. |
| * |
| * This can fail to turn off the rc6 if the GPU is stuck after a failed |
| * reset and we are trying to force the machine to sleep. |
| */ |
| if (vlv_wait_for_pw_status(dev_priv, mask, val)) |
| DRM_DEBUG_DRIVER("timeout waiting for GT wells to go %s\n", |
| onoff(wait_for_on)); |
| } |
| |
| static void vlv_check_no_gt_access(struct drm_i915_private *dev_priv) |
| { |
| if (!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEERR)) |
| return; |
| |
| DRM_DEBUG_DRIVER("GT register access while GT waking disabled\n"); |
| I915_WRITE(VLV_GTLC_PW_STATUS, VLV_GTLC_ALLOWWAKEERR); |
| } |
| |
| static int vlv_suspend_complete(struct drm_i915_private *dev_priv) |
| { |
| u32 mask; |
| int err; |
| |
| /* |
| * Bspec defines the following GT well on flags as debug only, so |
| * don't treat them as hard failures. |
| */ |
| vlv_wait_for_gt_wells(dev_priv, false); |
| |
| mask = VLV_GTLC_RENDER_CTX_EXISTS | VLV_GTLC_MEDIA_CTX_EXISTS; |
| WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL) & mask) != mask); |
| |
| vlv_check_no_gt_access(dev_priv); |
| |
| err = vlv_force_gfx_clock(dev_priv, true); |
| if (err) |
| goto err1; |
| |
| err = vlv_allow_gt_wake(dev_priv, false); |
| if (err) |
| goto err2; |
| |
| if (!IS_CHERRYVIEW(dev_priv)) |
| vlv_save_gunit_s0ix_state(dev_priv); |
| |
| err = vlv_force_gfx_clock(dev_priv, false); |
| if (err) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| /* For safety always re-enable waking and disable gfx clock forcing */ |
| vlv_allow_gt_wake(dev_priv, true); |
| err1: |
| vlv_force_gfx_clock(dev_priv, false); |
| |
| return err; |
| } |
| |
| static int vlv_resume_prepare(struct drm_i915_private *dev_priv, |
| bool rpm_resume) |
| { |
| int err; |
| int ret; |
| |
| /* |
| * If any of the steps fail just try to continue, that's the best we |
| * can do at this point. Return the first error code (which will also |
| * leave RPM permanently disabled). |
| */ |
| ret = vlv_force_gfx_clock(dev_priv, true); |
| |
| if (!IS_CHERRYVIEW(dev_priv)) |
| vlv_restore_gunit_s0ix_state(dev_priv); |
| |
| err = vlv_allow_gt_wake(dev_priv, true); |
| if (!ret) |
| ret = err; |
| |
| err = vlv_force_gfx_clock(dev_priv, false); |
| if (!ret) |
| ret = err; |
| |
| vlv_check_no_gt_access(dev_priv); |
| |
| if (rpm_resume) |
| intel_init_clock_gating(dev_priv); |
| |
| return ret; |
| } |
| |
| static int intel_runtime_suspend(struct device *kdev) |
| { |
| struct pci_dev *pdev = to_pci_dev(kdev); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int ret; |
| |
| if (WARN_ON_ONCE(!(dev_priv->gt_pm.rc6.enabled && HAS_RC6(dev_priv)))) |
| return -ENODEV; |
| |
| if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev_priv))) |
| return -ENODEV; |
| |
| DRM_DEBUG_KMS("Suspending device\n"); |
| |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| /* |
| * We are safe here against re-faults, since the fault handler takes |
| * an RPM reference. |
| */ |
| i915_gem_runtime_suspend(dev_priv); |
| |
| intel_uc_suspend(dev_priv); |
| |
| intel_runtime_pm_disable_interrupts(dev_priv); |
| |
| intel_uncore_suspend(dev_priv); |
| |
| ret = 0; |
| if (IS_GEN9_LP(dev_priv)) { |
| bxt_display_core_uninit(dev_priv); |
| bxt_enable_dc9(dev_priv); |
| } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { |
| hsw_enable_pc8(dev_priv); |
| } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { |
| ret = vlv_suspend_complete(dev_priv); |
| } |
| |
| if (ret) { |
| DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret); |
| intel_uncore_runtime_resume(dev_priv); |
| |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| intel_uc_resume(dev_priv); |
| |
| i915_gem_init_swizzling(dev_priv); |
| i915_gem_restore_fences(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| return ret; |
| } |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| WARN_ON_ONCE(atomic_read(&dev_priv->runtime_pm.wakeref_count)); |
| |
| if (intel_uncore_arm_unclaimed_mmio_detection(dev_priv)) |
| DRM_ERROR("Unclaimed access detected prior to suspending\n"); |
| |
| dev_priv->runtime_pm.suspended = true; |
| |
| /* |
| * FIXME: We really should find a document that references the arguments |
| * used below! |
| */ |
| if (IS_BROADWELL(dev_priv)) { |
| /* |
| * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop |
| * being detected, and the call we do at intel_runtime_resume() |
| * won't be able to restore them. Since PCI_D3hot matches the |
| * actual specification and appears to be working, use it. |
| */ |
| intel_opregion_notify_adapter(dev_priv, PCI_D3hot); |
| } else { |
| /* |
| * current versions of firmware which depend on this opregion |
| * notification have repurposed the D1 definition to mean |
| * "runtime suspended" vs. what you would normally expect (D3) |
| * to distinguish it from notifications that might be sent via |
| * the suspend path. |
| */ |
| intel_opregion_notify_adapter(dev_priv, PCI_D1); |
| } |
| |
| assert_forcewakes_inactive(dev_priv); |
| |
| if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) |
| intel_hpd_poll_init(dev_priv); |
| |
| DRM_DEBUG_KMS("Device suspended\n"); |
| return 0; |
| } |
| |
| static int intel_runtime_resume(struct device *kdev) |
| { |
| struct pci_dev *pdev = to_pci_dev(kdev); |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int ret = 0; |
| |
| if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev_priv))) |
| return -ENODEV; |
| |
| DRM_DEBUG_KMS("Resuming device\n"); |
| |
| WARN_ON_ONCE(atomic_read(&dev_priv->runtime_pm.wakeref_count)); |
| disable_rpm_wakeref_asserts(dev_priv); |
| |
| intel_opregion_notify_adapter(dev_priv, PCI_D0); |
| dev_priv->runtime_pm.suspended = false; |
| if (intel_uncore_unclaimed_mmio(dev_priv)) |
| DRM_DEBUG_DRIVER("Unclaimed access during suspend, bios?\n"); |
| |
| if (IS_GEN9_LP(dev_priv)) { |
| bxt_disable_dc9(dev_priv); |
| bxt_display_core_init(dev_priv, true); |
| if (dev_priv->csr.dmc_payload && |
| (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5)) |
| gen9_enable_dc5(dev_priv); |
| } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { |
| hsw_disable_pc8(dev_priv); |
| } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { |
| ret = vlv_resume_prepare(dev_priv, true); |
| } |
| |
| intel_uncore_runtime_resume(dev_priv); |
| |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| intel_uc_resume(dev_priv); |
| |
| /* |
| * No point of rolling back things in case of an error, as the best |
| * we can do is to hope that things will still work (and disable RPM). |
| */ |
| i915_gem_init_swizzling(dev_priv); |
| i915_gem_restore_fences(dev_priv); |
| |
| /* |
| * On VLV/CHV display interrupts are part of the display |
| * power well, so hpd is reinitialized from there. For |
| * everyone else do it here. |
| */ |
| if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) |
| intel_hpd_init(dev_priv); |
| |
| intel_enable_ipc(dev_priv); |
| |
| enable_rpm_wakeref_asserts(dev_priv); |
| |
| if (ret) |
| DRM_ERROR("Runtime resume failed, disabling it (%d)\n", ret); |
| else |
| DRM_DEBUG_KMS("Device resumed\n"); |
| |
| return ret; |
| } |
| |
| const struct dev_pm_ops i915_pm_ops = { |
| /* |
| * S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND, |
| * PMSG_RESUME] |
| */ |
| .prepare = i915_pm_prepare, |
| .suspend = i915_pm_suspend, |
| .suspend_late = i915_pm_suspend_late, |
| .resume_early = i915_pm_resume_early, |
| .resume = i915_pm_resume, |
| |
| /* |
| * S4 event handlers |
| * @freeze, @freeze_late : called (1) before creating the |
| * hibernation image [PMSG_FREEZE] and |
| * (2) after rebooting, before restoring |
| * the image [PMSG_QUIESCE] |
| * @thaw, @thaw_early : called (1) after creating the hibernation |
| * image, before writing it [PMSG_THAW] |
| * and (2) after failing to create or |
| * restore the image [PMSG_RECOVER] |
| * @poweroff, @poweroff_late: called after writing the hibernation |
| * image, before rebooting [PMSG_HIBERNATE] |
| * @restore, @restore_early : called after rebooting and restoring the |
| * hibernation image [PMSG_RESTORE] |
| */ |
| .freeze = i915_pm_freeze, |
| .freeze_late = i915_pm_freeze_late, |
| .thaw_early = i915_pm_thaw_early, |
| .thaw = i915_pm_thaw, |
| .poweroff = i915_pm_suspend, |
| .poweroff_late = i915_pm_poweroff_late, |
| .restore_early = i915_pm_restore_early, |
| .restore = i915_pm_restore, |
| |
| /* S0ix (via runtime suspend) event handlers */ |
| .runtime_suspend = intel_runtime_suspend, |
| .runtime_resume = intel_runtime_resume, |
| }; |
| |
| static const struct vm_operations_struct i915_gem_vm_ops = { |
| .fault = i915_gem_fault, |
| .open = drm_gem_vm_open, |
| .close = drm_gem_vm_close, |
| }; |
| |
| static const struct file_operations i915_driver_fops = { |
| .owner = THIS_MODULE, |
| .open = drm_open, |
| .release = drm_release, |
| .unlocked_ioctl = drm_ioctl, |
| .mmap = drm_gem_mmap, |
| .poll = drm_poll, |
| .read = drm_read, |
| .compat_ioctl = i915_compat_ioctl, |
| .llseek = noop_llseek, |
| }; |
| |
| static int |
| i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| return -ENODEV; |
| } |
| |
| static const struct drm_ioctl_desc i915_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer_ioctl, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2_WR, i915_gem_execbuffer2_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_OPEN, i915_perf_open_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_ADD_CONFIG, i915_perf_add_config_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_REMOVE_CONFIG, i915_perf_remove_config_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_QUERY, i915_query_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW), |
| }; |
| |
| static struct drm_driver driver = { |
| /* Don't use MTRRs here; the Xserver or userspace app should |
| * deal with them for Intel hardware. |
| */ |
| .driver_features = |
| DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME | |
| DRIVER_RENDER | DRIVER_MODESET | DRIVER_ATOMIC | DRIVER_SYNCOBJ, |
| .release = i915_driver_release, |
| .open = i915_driver_open, |
| .lastclose = i915_driver_lastclose, |
| .postclose = i915_driver_postclose, |
| |
| .gem_close_object = i915_gem_close_object, |
| .gem_free_object_unlocked = i915_gem_free_object, |
| .gem_vm_ops = &i915_gem_vm_ops, |
| |
| .prime_handle_to_fd = drm_gem_prime_handle_to_fd, |
| .prime_fd_to_handle = drm_gem_prime_fd_to_handle, |
| .gem_prime_export = i915_gem_prime_export, |
| .gem_prime_import = i915_gem_prime_import, |
| |
| .dumb_create = i915_gem_dumb_create, |
| .dumb_map_offset = i915_gem_mmap_gtt, |
| .ioctls = i915_ioctls, |
| .num_ioctls = ARRAY_SIZE(i915_ioctls), |
| .fops = &i915_driver_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| }; |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST) |
| #include "selftests/mock_drm.c" |
| #endif |