| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas Pin Function Controller (GPIO and Pin Mux/Config) |
| |
| maintainers: |
| - Geert Uytterhoeven <geert+renesas@glider.be> |
| |
| description: |
| The Pin Function Controller (PFC) is a Pin Mux/Config controller. |
| On SH/R-Mobile SoCs it also acts as a GPIO controller. |
| |
| properties: |
| compatible: |
| enum: |
| - renesas,pfc-emev2 # EMMA Mobile EV2 |
| - renesas,pfc-r8a73a4 # R-Mobile APE6 |
| - renesas,pfc-r8a7740 # R-Mobile A1 |
| - renesas,pfc-r8a7742 # RZ/G1H |
| - renesas,pfc-r8a7743 # RZ/G1M |
| - renesas,pfc-r8a7744 # RZ/G1N |
| - renesas,pfc-r8a7745 # RZ/G1E |
| - renesas,pfc-r8a77470 # RZ/G1C |
| - renesas,pfc-r8a774a1 # RZ/G2M |
| - renesas,pfc-r8a774b1 # RZ/G2N |
| - renesas,pfc-r8a774c0 # RZ/G2E |
| - renesas,pfc-r8a774e1 # RZ/G2H |
| - renesas,pfc-r8a7778 # R-Car M1 |
| - renesas,pfc-r8a7779 # R-Car H1 |
| - renesas,pfc-r8a7790 # R-Car H2 |
| - renesas,pfc-r8a7791 # R-Car M2-W |
| - renesas,pfc-r8a7792 # R-Car V2H |
| - renesas,pfc-r8a7793 # R-Car M2-N |
| - renesas,pfc-r8a7794 # R-Car E2 |
| - renesas,pfc-r8a7795 # R-Car H3 |
| - renesas,pfc-r8a7796 # R-Car M3-W |
| - renesas,pfc-r8a77961 # R-Car M3-W+ |
| - renesas,pfc-r8a77965 # R-Car M3-N |
| - renesas,pfc-r8a77970 # R-Car V3M |
| - renesas,pfc-r8a77980 # R-Car V3H |
| - renesas,pfc-r8a77990 # R-Car E3 |
| - renesas,pfc-r8a77995 # R-Car D3 |
| - renesas,pfc-r8a779a0 # R-Car V3U |
| - renesas,pfc-sh73a0 # SH-Mobile AG5 |
| |
| reg: |
| minItems: 1 |
| maxItems: 10 |
| |
| gpio-controller: true |
| |
| '#gpio-cells': |
| const: 2 |
| |
| gpio-ranges: |
| minItems: 1 |
| maxItems: 16 |
| |
| interrupts-extended: |
| minItems: 32 |
| maxItems: 64 |
| description: |
| Specify the interrupts associated with external IRQ pins on SoCs where |
| the PFC acts as a GPIO controller. It must contain one interrupt per |
| external IRQ, sorted by external IRQ number. |
| |
| power-domains: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| |
| if: |
| properties: |
| compatible: |
| enum: |
| - renesas,pfc-r8a73a4 |
| - renesas,pfc-r8a7740 |
| - renesas,pfc-sh73a0 |
| then: |
| required: |
| - interrupts-extended |
| - gpio-controller |
| - '#gpio-cells' |
| - gpio-ranges |
| - power-domains |
| |
| additionalProperties: |
| anyOf: |
| - type: object |
| allOf: |
| - $ref: pincfg-node.yaml# |
| - $ref: pinmux-node.yaml# |
| |
| description: |
| Pin controller client devices use pin configuration subnodes (children |
| and grandchildren) for desired pin configuration. |
| Client device subnodes use below standard properties. |
| |
| properties: |
| phandle: true |
| function: true |
| groups: true |
| pins: true |
| bias-disable: true |
| bias-pull-down: true |
| bias-pull-up: true |
| drive-strength: |
| enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values |
| power-source: |
| enum: [ 1800, 3300 ] |
| gpio-hog: true |
| gpios: true |
| input: true |
| output-high: true |
| output-low: true |
| |
| additionalProperties: false |
| |
| - type: object |
| properties: |
| phandle: true |
| |
| additionalProperties: |
| $ref: "#/additionalProperties/anyOf/0" |
| |
| examples: |
| - | |
| pfc: pinctrl@e6050000 { |
| compatible = "renesas,pfc-r8a7740"; |
| reg = <0xe6050000 0x8000>, |
| <0xe605800c 0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pfc 0 0 212>; |
| interrupts-extended = |
| <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, |
| <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, |
| <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, |
| <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, |
| <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, |
| <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, |
| <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, |
| <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; |
| power-domains = <&pd_c5>; |
| |
| lcd0-mux-hog { |
| /* DBGMD/LCDC0/FSIA MUX */ |
| gpio-hog; |
| gpios = <176 0>; |
| output-high; |
| }; |
| }; |
| |
| - | |
| pinctrl@e6060000 { |
| compatible = "renesas,pfc-r8a7795"; |
| reg = <0xe6060000 0x50c>; |
| |
| avb_pins: avb { |
| mux { |
| groups = "avb_link", "avb_mdio", "avb_mii"; |
| function = "avb"; |
| }; |
| |
| pins_mdio { |
| groups = "avb_mdio"; |
| drive-strength = <24>; |
| }; |
| |
| pins_mii_tx { |
| pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", |
| "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2", |
| "PIN_AVB_TD3"; |
| drive-strength = <12>; |
| }; |
| }; |
| |
| keys_pins: keys { |
| pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1"; |
| bias-pull-up; |
| }; |
| |
| sdhi0_pins: sd0 { |
| groups = "sdhi0_data4", "sdhi0_ctrl"; |
| function = "sdhi0"; |
| power-source = <3300>; |
| }; |
| }; |