| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include "am57xx-industrial-grade.dtsi" |
| |
| / { |
| aliases { |
| rtc0 = &tps659038_rtc; |
| rtc1 = &rtc; |
| display0 = &hdmi0; |
| }; |
| |
| chosen { |
| stdout-path = &uart3; |
| }; |
| |
| vmain: fixedregulator-vmain { |
| compatible = "regulator-fixed"; |
| regulator-name = "VMAIN"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| v3_3d: fixedregulator-v3_3d { |
| compatible = "regulator-fixed"; |
| regulator-name = "V3_3D"; |
| vin-supply = <&smps9_reg>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| v1_2d: fixedregulator-v1_2d { |
| compatible = "regulator-fixed"; |
| regulator-name = "V1_2D"; |
| vin-supply = <&vmain>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vtt_fixed: fixedregulator-vtt { |
| /* TPS51200 */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vtt_fixed"; |
| vin-supply = <&v3_3d>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| leds-iio { |
| status = "disabled"; |
| compatible = "gpio-leds"; |
| led-out0 { |
| label = "out0"; |
| gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out1 { |
| label = "out1"; |
| gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out2 { |
| label = "out2"; |
| gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out3 { |
| label = "out3"; |
| gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out4 { |
| label = "out4"; |
| gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out5 { |
| label = "out5"; |
| gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out6 { |
| label = "out6"; |
| gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| |
| led-out7 { |
| label = "out7"; |
| gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| hdmi0: connector@0 { |
| compatible = "hdmi-connector"; |
| label = "hdmi"; |
| |
| type = "a"; |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <&tpd12s015_out>; |
| }; |
| }; |
| }; |
| |
| tpd12s015: encoder@0 { |
| compatible = "ti,tpd12s016", "ti,tpd12s015"; |
| |
| gpios = <0>, /* optional CT_CP_HPD */ |
| <0>, /* optional LS_OE */ |
| <&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */ |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| tpd12s015_in: endpoint@0 { |
| remote-endpoint = <&hdmi_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| tpd12s015_out: endpoint@0 { |
| remote-endpoint = <&hdmi_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| src_clk_x1: src_clk_x1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <20000000>; |
| }; |
| }; |
| |
| &dra7_pmx_core { |
| dcan1_pins_default: dcan1_pins_default { |
| pinctrl-single,pins = < |
| DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ |
| DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */ |
| >; |
| }; |
| |
| dcan1_pins_sleep: dcan1_pins_sleep { |
| pinctrl-single,pins = < |
| DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ |
| DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ |
| >; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| tps659038: tps659038@58 { |
| compatible = "ti,tps659038"; |
| reg = <0x58>; |
| interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH |
| &dra7_pmx_core 0x418>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| ti,system-power-controller; |
| ti,palmas-override-powerhold; |
| |
| tps659038_pmic { |
| compatible = "ti,tps659038-pmic"; |
| |
| smps12-in-supply = <&vmain>; |
| smps3-in-supply = <&vmain>; |
| smps45-in-supply = <&vmain>; |
| smps6-in-supply = <&vmain>; |
| smps7-in-supply = <&vmain>; |
| smps8-in-supply = <&vmain>; |
| smps9-in-supply = <&vmain>; |
| ldo1-in-supply = <&vmain>; |
| ldo2-in-supply = <&vmain>; |
| ldo3-in-supply = <&vmain>; |
| ldo4-in-supply = <&vmain>; |
| ldo9-in-supply = <&vmain>; |
| ldoln-in-supply = <&vmain>; |
| ldousb-in-supply = <&vmain>; |
| ldortc-in-supply = <&vmain>; |
| |
| regulators { |
| smps12_reg: smps12 { |
| /* VDD_MPU */ |
| regulator-name = "smps12"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| smps3_reg: smps3 { |
| /* VDD_DDR EMIF1 EMIF2 */ |
| regulator-name = "smps3"; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| smps45_reg: smps45 { |
| /* VDD_DSPEVE on AM572 */ |
| /* VDD_IVA + VDD_DSP on AM571 */ |
| regulator-name = "smps45"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| smps6_reg: smps6 { |
| /* VDD_GPU */ |
| regulator-name = "smps6"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1250000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| smps7_reg: smps7 { |
| /* VDD_CORE */ |
| regulator-name = "smps7"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1150000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| smps8_reg: smps8 { |
| /* 5728 - VDD_IVAHD */ |
| /* 5718 - N.C. test point */ |
| regulator-name = "smps8"; |
| }; |
| |
| smps9_reg: smps9 { |
| /* VDD_3_3D */ |
| regulator-name = "smps9"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo1_reg: ldo1 { |
| /* VDDSHV8 - VSDMMC */ |
| /* NOTE: on rev 1.3a, data supply */ |
| regulator-name = "ldo1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: ldo2 { |
| /* VDDSH18V */ |
| regulator-name = "ldo2"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo3_reg: ldo3 { |
| /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */ |
| regulator-name = "ldo3"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldo4_reg: ldo4 { |
| /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/ |
| regulator-name = "ldo4"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| /* LDO5-8 unused */ |
| |
| ldo9_reg: ldo9 { |
| /* VDD_RTC */ |
| regulator-name = "ldo9"; |
| regulator-min-microvolt = <840000>; |
| regulator-max-microvolt = <1160000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldoln_reg: ldoln { |
| /* VDDA_1V8_PLL */ |
| regulator-name = "ldoln"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldousb_reg: ldousb { |
| /* VDDA_3V_USB: VDDA_USBHS33 */ |
| regulator-name = "ldousb"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| ldortc_reg: ldortc { |
| /* VDDA_RTC */ |
| regulator-name = "ldortc"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| regen1: regen1 { |
| /* VDD_3V3_ON */ |
| regulator-name = "regen1"; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| regen2: regen2 { |
| /* Needed for PMIC internal resource */ |
| regulator-name = "regen2"; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| tps659038_rtc: tps659038_rtc { |
| compatible = "ti,palmas-rtc"; |
| interrupt-parent = <&tps659038>; |
| interrupts = <8 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-source; |
| }; |
| |
| tps659038_pwr_button: tps659038_pwr_button { |
| compatible = "ti,palmas-pwrbutton"; |
| interrupt-parent = <&tps659038>; |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-source; |
| ti,palmas-long-press-seconds = <12>; |
| }; |
| |
| tps659038_gpio: tps659038_gpio { |
| compatible = "ti,palmas-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| extcon_usb2: tps659038_usb { |
| compatible = "ti,palmas-usb-vid"; |
| ti,enable-vbus-detection; |
| ti,enable-id-detection; |
| /* ID & VBUS GPIOs provided in board dts */ |
| }; |
| }; |
| |
| tpic2810: tpic2810@60 { |
| compatible = "ti,tpic2810"; |
| reg = <0x60>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| dsi_bridge: tc358778@e { |
| compatible = "toshiba,tc358778", "toshiba,tc358768"; |
| reg = <0xe>; |
| status = "disabled"; |
| |
| clocks = <&src_clk_x1>; |
| clock-names = "refclk"; |
| |
| vddc-supply = <&v1_2d>; |
| vddmipi-supply = <&v1_2d>; |
| vddio-supply = <&v3_3d>; |
| |
| dsi_bridge_ports: ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| rgb_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &mcspi3 { |
| status = "okay"; |
| ti,pindir-d0-out-d1-in; |
| |
| sn65hvs882: sn65hvs882@0 { |
| compatible = "pisosr-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| reg = <0>; |
| spi-max-frequency = <1000000>; |
| spi-cpol; |
| }; |
| }; |
| |
| &uart3 { |
| status = "okay"; |
| interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH |
| &dra7_pmx_core 0x248>; |
| }; |
| |
| &rtc { |
| status = "okay"; |
| ext-clk-src; |
| }; |
| |
| &mac_sw { |
| status = "okay"; |
| }; |
| |
| &cpsw_port1 { |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii-rxid"; |
| ti,dual-emac-pvid = <1>; |
| }; |
| |
| &cpsw_port2 { |
| phy-handle = <ðphy1>; |
| phy-mode = "rgmii-rxid"; |
| ti,dual-emac-pvid = <2>; |
| }; |
| |
| &davinci_mdio_sw { |
| ethphy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| |
| ethphy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| &usb2_phy1 { |
| phy-supply = <&ldousb_reg>; |
| }; |
| |
| &usb2_phy2 { |
| phy-supply = <&ldousb_reg>; |
| }; |
| |
| &usb1 { |
| dr_mode = "host"; |
| }; |
| |
| &omap_dwc3_2 { |
| extcon = <&extcon_usb2>; |
| }; |
| |
| &usb2 { |
| extcon = <&extcon_usb2>; |
| dr_mode = "otg"; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| vmmc-supply = <&v3_3d>; |
| vqmmc-supply = <&ldo1_reg>; |
| bus-width = <4>; |
| cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ |
| no-1-8-v; |
| }; |
| |
| &mmc2 { |
| status = "okay"; |
| vmmc-supply = <&v3_3d>; |
| vqmmc-supply = <&v3_3d>; |
| bus-width = <8>; |
| non-removable; |
| max-frequency = <96000000>; |
| no-1-8-v; |
| }; |
| |
| &dcan1 { |
| status = "okay"; |
| pinctrl-names = "default", "sleep", "active"; |
| pinctrl-0 = <&dcan1_pins_sleep>; |
| pinctrl-1 = <&dcan1_pins_sleep>; |
| pinctrl-2 = <&dcan1_pins_default>; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| |
| spi-max-frequency = <76800000>; |
| m25p80@0 { |
| compatible = "s25fl256s1", "jedec,spi-nor"; |
| spi-max-frequency = <76800000>; |
| reg = <0>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* MTD partition table. |
| * The ROM checks the first four physical blocks |
| * for a valid file to boot and the flash here is |
| * 64KiB block size. |
| */ |
| partition@0 { |
| label = "QSPI.SPL"; |
| reg = <0x00000000 0x000040000>; |
| }; |
| partition@1 { |
| label = "QSPI.u-boot"; |
| reg = <0x00040000 0x00100000>; |
| }; |
| partition@2 { |
| label = "QSPI.u-boot-spl-os"; |
| reg = <0x00140000 0x00080000>; |
| }; |
| partition@3 { |
| label = "QSPI.u-boot-env"; |
| reg = <0x001c0000 0x00010000>; |
| }; |
| partition@4 { |
| label = "QSPI.u-boot-env.backup1"; |
| reg = <0x001d0000 0x0010000>; |
| }; |
| partition@5 { |
| label = "QSPI.kernel"; |
| reg = <0x001e0000 0x0800000>; |
| }; |
| partition@6 { |
| label = "QSPI.file-system"; |
| reg = <0x009e0000 0x01620000>; |
| }; |
| }; |
| }; |
| |
| &cpu0 { |
| vdd-supply = <&smps12_reg>; |
| }; |
| |
| &hdmi { |
| status = "okay"; |
| |
| vdda-supply = <&ldo4_reg>; |
| |
| port { |
| hdmi_out: endpoint { |
| remote-endpoint = <&tpd12s015_in>; |
| }; |
| }; |
| }; |
| |
| &dss { |
| status = "okay"; |
| |
| vdda_video-supply = <&ldoln_reg>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| dpi_out: endpoint { |
| remote-endpoint = <&rgb_in>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| }; |
