| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2018 |
| * Lukasz Majewski, DENX Software Engineering, lukma@denx.de |
| */ |
| |
| /dts-v1/; |
| #include "imx53-kp.dtsi" |
| |
| / { |
| model = "K+P imx53 DDC"; |
| compatible = "kiebackpeter,imx53-ddc", "fsl,imx53"; |
| |
| backlight_lcd: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm2 0 50000>; |
| power-supply = <®_backlight>; |
| brightness-levels = <0 24 28 32 36 |
| 40 44 48 52 56 |
| 60 64 68 72 76 |
| 80 84 88 92 96 100>; |
| default-brightness-level = <20>; |
| }; |
| |
| lcd_display: display { |
| compatible = "fsl,imx-parallel-display"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interface-pix-fmt = "rgb24"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_disp>; |
| |
| port@0 { |
| reg = <0>; |
| |
| display1_in: endpoint { |
| remote-endpoint = <&ipu_di1_disp1>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| lcd_display_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| lcd_panel: lcd-panel { |
| compatible = "koe,tx14d24vm1bpa"; |
| backlight = <&backlight_lcd>; |
| power-supply = <®_3v3>; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcd_display_out>; |
| }; |
| }; |
| }; |
| |
| reg_backlight: regulator-backlight { |
| compatible = "regulator-fixed"; |
| regulator-name = "backlight-supply"; |
| regulator-min-microvolt = <15000000>; |
| regulator-max-microvolt = <15000000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &fec { |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| adc@48 { |
| compatible = "ti,ads1015"; |
| reg = <0x48>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| channel@4 { |
| reg = <4>; |
| ti,gain = <2>; |
| ti,datarate = <4>; |
| }; |
| |
| channel@6 { |
| reg = <6>; |
| ti,gain = <2>; |
| ti,datarate = <4>; |
| }; |
| }; |
| |
| gpio-expander2@21 { |
| compatible = "nxp,pcf8574"; |
| reg = <0x21>; |
| interrupts = <109>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| }; |
| |
| &iomuxc { |
| imx53-kp-ddc { |
| pinctrl_disp: dispgrp { |
| fsl,pins = < |
| MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 |
| MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 |
| MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 |
| MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 |
| MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 |
| MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 |
| MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 |
| MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 |
| MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 |
| MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 |
| MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 |
| MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 |
| MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 |
| MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 |
| MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 |
| MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 |
| MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 |
| MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 |
| MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 |
| MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 |
| MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 |
| MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 |
| MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 |
| MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 |
| MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 |
| MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 |
| MX53_PAD_GPIO_1__PWM2_PWMO 0x4 |
| >; |
| }; |
| }; |
| }; |
| |
| &ipu_di1_disp1 { |
| remote-endpoint = <&display1_in>; |
| }; |
| |
| &pmic { |
| fsl,mc13xxx-uses-touch; |
| }; |