| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright (c) 2014 Protonic Holland |
| */ |
| |
| /dts-v1/; |
| #include "imx6dl.dtsi" |
| #include "imx6qdl-prti6q.dtsi" |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| model = "Protonic RVT board"; |
| compatible = "prt,prtrvt", "fsl,imx6dl"; |
| |
| memory@10000000 { |
| device_type = "memory"; |
| reg = <0x10000000 0x10000000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_leds>; |
| |
| led-debug0 { |
| function = LED_FUNCTION_STATUS; |
| gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <20000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| }; |
| |
| &ecspi3 { |
| cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| status = "okay"; |
| |
| nfc@0 { |
| compatible = "ti,trf7970a"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_nfc>; |
| spi-max-frequency = <2000000>; |
| interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>; |
| ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, |
| <&gpio5 11 GPIO_ACTIVE_LOW>; |
| vin-supply = <®_3v3>; |
| vin-voltage-override = <3100000>; |
| autosuspend-delay = <30000>; |
| irq-status-read-quirk; |
| en2-rf-quirk; |
| t5t-rmb-extra-byte-quirk; |
| status = "okay"; |
| }; |
| }; |
| |
| &i2c3 { |
| adc@49 { |
| compatible = "ti,ads1015"; |
| reg = <0x49>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* nc */ |
| channel@4 { |
| reg = <4>; |
| ti,gain = <3>; |
| ti,datarate = <3>; |
| }; |
| |
| /* nc */ |
| channel@5 { |
| reg = <5>; |
| ti,gain = <3>; |
| ti,datarate = <3>; |
| }; |
| |
| /* can1_l */ |
| channel@6 { |
| reg = <6>; |
| ti,gain = <3>; |
| ti,datarate = <3>; |
| }; |
| |
| /* can1_h */ |
| channel@7 { |
| reg = <7>; |
| ti,gain = <3>; |
| ti,datarate = <3>; |
| }; |
| }; |
| |
| rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &usbh1 { |
| status = "disabled"; |
| }; |
| |
| &vpu { |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| pinctrl_can1phy: can1phy { |
| fsl,pins = < |
| /* CAN1_SR */ |
| MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 |
| /* CAN1_TERM */ |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| /* CS */ |
| MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 |
| >; |
| }; |
| |
| pinctrl_ecspi3: ecspi3grp { |
| fsl,pins = < |
| MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 |
| MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 |
| MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 |
| MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 |
| >; |
| }; |
| |
| pinctrl_leds: ledsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_nfc: nfcgrp { |
| fsl,pins = < |
| /* NFC_ASK_OOK */ |
| MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1 |
| /* NFC_PWR_EN */ |
| MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1 |
| /* NFC_EN2 */ |
| MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1 |
| /* NFC_EN */ |
| MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 |
| /* NFC_MOD */ |
| MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 |
| /* NFC_IRQ */ |
| MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 |
| >; |
| }; |
| }; |