| // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| /* |
| * Copyright (C) 2016, 2020 PHYTEC Messtechnik |
| * Author: Christian Hemp <c.hemp@phytec.de> |
| * Author: Stefan Riedmueller <s.riedmueller@phytec.de> |
| */ |
| |
| / { |
| backlight_lcd: backlight-lcd { |
| compatible = "pwm-backlight"; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <5>; |
| power-supply = <®_backlight_en>; |
| pwms = <&pwm3 0 5000000>; |
| status = "disabled"; |
| }; |
| |
| lcd_panel: lcd-panel { |
| compatible = "edt,etm0700g0edh6"; |
| backlight = <&backlight_lcd>; |
| status = "disabled"; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcdif_parallel_out>; |
| }; |
| }; |
| }; |
| |
| reg_backlight_en: regulator-backlight-en { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_backlight_en>; |
| regulator-name = "backlight-lcd"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &i2c1 { |
| edt_ft5406: touchscreen@38 { |
| compatible = "edt,edt-ft5406"; |
| reg = <0x38>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_edt_ft5406>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-source; |
| status = "disabled"; |
| }; |
| |
| stmpe: touchscreen@44 { |
| compatible = "st,stmpe811"; |
| reg = <0x44>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_stmpe>; |
| interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-parent = <&gpio5>; |
| wakeup-source; |
| status = "disabled"; |
| |
| stmpe_touchscreen { |
| compatible = "st,stmpe-ts"; |
| st,sample-time = <4>; |
| st,mod-12b = <1>; |
| st,ref-sel = <0>; |
| st,adc-freq = <1>; |
| st,ave-ctrl = <1>; |
| st,touch-det-delay = <2>; |
| st,settling = <2>; |
| st,fraction-z = <7>; |
| st,i-drive = <1>; |
| touchscreen-inverted-x = <1>; |
| touchscreen-inverted-y = <1>; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif_dat>; |
| status = "disabled"; |
| |
| port { |
| lcdif_parallel_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| &pwm3 { |
| #pwm-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| pinctrl_edt_ft5406: edtft5406grp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_backlight_en: bachlightengrp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_lcdif_dat: lcdifdatgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59 |
| MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59 |
| MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59 |
| MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59 |
| MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59 |
| MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59 |
| MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59 |
| MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59 |
| MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59 |
| MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59 |
| MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59 |
| MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59 |
| MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59 |
| MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59 |
| MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59 |
| MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59 |
| MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59 |
| MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59 |
| MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59 |
| MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59 |
| MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59 |
| MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_stmpe: stmpegrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 |
| >; |
| }; |
| }; |
