| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com> |
| */ |
| |
| #include <dt-bindings/input/input.h> |
| #include "rk3288.dtsi" |
| |
| / { |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| adc-keys { |
| compatible = "adc-keys"; |
| io-channels = <&saradc 1>; |
| io-channel-names = "buttons"; |
| keyup-threshold-microvolt = <1800000>; |
| |
| button-recovery { |
| label = "Recovery"; |
| linux,code = <KEY_VENDOR>; |
| press-threshold-microvolt = <0>; |
| }; |
| }; |
| |
| dovdd_1v8: dovdd-1v8-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "dovdd_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc28_dvp>; |
| }; |
| |
| ext_gmac: external-gmac-clock { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <125000000>; |
| clock-output-names = "ext_gmac"; |
| }; |
| |
| ir: ir-receiver { |
| compatible = "gpio-ir-receiver"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ir_int>; |
| }; |
| |
| keys: gpio-keys { |
| compatible = "gpio-keys"; |
| |
| power { |
| wakeup-source; |
| gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| label = "GPIO Power"; |
| linux,code = <KEY_POWER>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwr_key>; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| work_led: led-0 { |
| gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; |
| label = "firefly:blue:user"; |
| linux,default-trigger = "rc-feedback"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&work_led_pin>; |
| }; |
| |
| power_led: led-1 { |
| gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; |
| label = "firefly:green:power"; |
| linux,default-trigger = "default-on"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&power_led_pin>; |
| }; |
| }; |
| |
| vbat_wl: vcc_sys: vsys-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_sys"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vcc_sd: sdmmc-regulator { |
| compatible = "regulator-fixed"; |
| gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_pwr>; |
| regulator-name = "vcc_sd"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <100000>; |
| vin-supply = <&vcc_io>; |
| }; |
| |
| vcc_flash: flash-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_flash"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_io>; |
| }; |
| |
| vcc_5v: usb-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&vcc_sys>; |
| }; |
| |
| vcc_host_5v: usb-host-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&host_vbus_drv>; |
| regulator-name = "vcc_host_5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| vin-supply = <&vcc_5v>; |
| }; |
| |
| vcc_otg_5v: usb-otg-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&otg_vbus_drv>; |
| regulator-name = "vcc_otg_5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| vin-supply = <&vcc_5v>; |
| }; |
| |
| /* |
| * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled |
| * by the dvp_pwr pin. |
| */ |
| vcc28_dvp: vcc28-dvp-regulator { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dvp_pwr>; |
| regulator-name = "vcc28_dvp"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| vin-supply = <&vcc_io>; |
| }; |
| }; |
| |
| &cpu0 { |
| cpu0-supply = <&vdd_cpu>; |
| }; |
| |
| &emmc { |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| disable-wp; |
| non-removable; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; |
| vmmc-supply = <&vcc_io>; |
| vqmmc-supply = <&vcc_flash>; |
| status = "okay"; |
| }; |
| |
| &gmac { |
| assigned-clocks = <&cru SCLK_MAC>; |
| assigned-clock-parents = <&ext_gmac>; |
| clock_in_out = "input"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; |
| phy-supply = <&vcc_lan>; |
| phy-mode = "rgmii"; |
| snps,reset-active-low; |
| snps,reset-delays-us = <0 10000 1000000>; |
| snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; |
| tx_delay = <0x30>; |
| rx_delay = <0x10>; |
| status = "okay"; |
| }; |
| |
| &gpu { |
| mali-supply = <&vdd_gpu>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| ddc-i2c-bus = <&i2c5>; |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| vdd_cpu: syr827@40 { |
| compatible = "silergy,syr827"; |
| fcs,suspend-voltage-selector = <1>; |
| reg = <0x40>; |
| regulator-name = "vdd_cpu"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-enable-ramp-delay = <300>; |
| regulator-ramp-delay = <8000>; |
| vin-supply = <&vcc_sys>; |
| }; |
| |
| vdd_gpu: syr828@41 { |
| compatible = "silergy,syr828"; |
| fcs,suspend-voltage-selector = <1>; |
| reg = <0x41>; |
| regulator-name = "vdd_gpu"; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-always-on; |
| vin-supply = <&vcc_sys>; |
| }; |
| |
| hym8563: hym8563@51 { |
| compatible = "haoyu,hym8563"; |
| reg = <0x51>; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "xin32k"; |
| interrupt-parent = <&gpio7>; |
| interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rtc_int>; |
| }; |
| |
| act8846: act8846@5a { |
| compatible = "active-semi,act8846"; |
| reg = <0x5a>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; |
| system-power-controller; |
| |
| vp1-supply = <&vcc_sys>; |
| vp2-supply = <&vcc_sys>; |
| vp3-supply = <&vcc_sys>; |
| vp4-supply = <&vcc_sys>; |
| inl1-supply = <&vcc_sys>; |
| inl2-supply = <&vcc_sys>; |
| inl3-supply = <&vcc_20>; |
| |
| regulators { |
| vcc_ddr: REG1 { |
| regulator-name = "vcc_ddr"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| }; |
| |
| vcc_io: REG2 { |
| regulator-name = "vcc_io"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdd_log: REG3 { |
| regulator-name = "vdd_log"; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| }; |
| |
| vcc_20: REG4 { |
| regulator-name = "vcc_20"; |
| regulator-min-microvolt = <2000000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-always-on; |
| }; |
| |
| vccio_sd: REG5 { |
| regulator-name = "vccio_sd"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdd10_lcd: REG6 { |
| regulator-name = "vdd10_lcd"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| }; |
| |
| vcca_18: REG7 { |
| regulator-name = "vcca_18"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vcca_33: REG8 { |
| regulator-name = "vcca_33"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vcc_lan: REG9 { |
| regulator-name = "vcc_lan"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| vdd_10: REG10 { |
| regulator-name = "vdd_10"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-always-on; |
| }; |
| |
| vccio_wl: vcc_18: REG11 { |
| regulator-name = "vcc_18"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vcc18_lcd: REG12 { |
| regulator-name = "vcc18_lcd"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| }; |
| |
| &io_domains { |
| status = "okay"; |
| |
| audio-supply = <&vcca_33>; |
| bb-supply = <&vcc_io>; |
| dvp-supply = <&dovdd_1v8>; |
| flash0-supply = <&vcc_flash>; |
| flash1-supply = <&vcc_lan>; |
| gpio30-supply = <&vcc_io>; |
| gpio1830-supply = <&vcc_io>; |
| lcdc-supply = <&vcc_io>; |
| sdcard-supply = <&vccio_sd>; |
| wifi-supply = <&vccio_wl>; |
| }; |
| |
| &pinctrl { |
| pcfg_output_high: pcfg-output-high { |
| output-high; |
| }; |
| |
| pcfg_output_low: pcfg-output-low { |
| output-low; |
| }; |
| |
| pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { |
| bias-pull-up; |
| drive-strength = <12>; |
| }; |
| |
| act8846 { |
| pwr_hold: pwr-hold { |
| rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; |
| }; |
| }; |
| |
| dvp { |
| dvp_pwr: dvp-pwr { |
| rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| gmac { |
| phy_int: phy-int { |
| rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| |
| phy_pmeb: phy-pmeb { |
| rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| |
| phy_rst: phy-rst { |
| rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; |
| }; |
| }; |
| |
| hym8563 { |
| rtc_int: rtc-int { |
| rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| keys { |
| pwr_key: pwr-key { |
| rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| leds { |
| power_led_pin: power-led-pin { |
| rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| work_led_pin: work-led-pin { |
| rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| sdmmc { |
| /* |
| * Default drive strength isn't enough to achieve even |
| * high-speed mode on firefly board so bump up to 12ma. |
| */ |
| sdmmc_bus4: sdmmc-bus4 { |
| rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>, |
| <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>, |
| <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>, |
| <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>; |
| }; |
| |
| sdmmc_clk: sdmmc-clk { |
| rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>; |
| }; |
| |
| sdmmc_cmd: sdmmc-cmd { |
| rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>; |
| }; |
| |
| sdmmc_pwr: sdmmc-pwr { |
| rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| usb_host { |
| host_vbus_drv: host-vbus-drv { |
| rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| usbhub_rst: usbhub-rst { |
| rockchip,pins = <8 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; |
| }; |
| }; |
| |
| usb_otg { |
| otg_vbus_drv: otg-vbus-drv { |
| rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| |
| &saradc { |
| vref-supply = <&vcc_18>; |
| status = "okay"; |
| }; |
| |
| &sdio0 { |
| bus-width = <4>; |
| disable-wp; |
| non-removable; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; |
| vmmc-supply = <&vbat_wl>; |
| vqmmc-supply = <&vccio_wl>; |
| status = "okay"; |
| }; |
| |
| &sdmmc { |
| bus-width = <4>; |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| card-detect-delay = <200>; |
| disable-wp; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; |
| vmmc-supply = <&vcc_sd>; |
| vqmmc-supply = <&vccio_sd>; |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; |
| status = "okay"; |
| }; |
| |
| &tsadc { |
| rockchip,hw-tshut-mode = <0>; |
| rockchip,hw-tshut-polarity = <0>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| status = "okay"; |
| }; |
| |
| &usbphy { |
| status = "okay"; |
| }; |
| |
| &usb_host1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usbhub_rst>; |
| status = "okay"; |
| }; |
| |
| &usb_otg { |
| status = "okay"; |
| }; |
| |
| &vopb { |
| status = "okay"; |
| }; |
| |
| &vopb_mmu { |
| status = "okay"; |
| }; |
| |
| &vopl { |
| status = "okay"; |
| }; |
| |
| &vopl_mmu { |
| status = "okay"; |
| }; |
| |
| &wdt { |
| status = "okay"; |
| }; |
