| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| */ |
| |
| #include "socfpga_cyclone5.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board"; |
| compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga"; |
| |
| chosen { |
| bootargs = "earlyprintk"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| name = "memory"; |
| device_type = "memory"; |
| reg = <0x0 0x40000000>; |
| }; |
| |
| aliases { |
| ethernet0 = &gmac1; |
| }; |
| |
| regulator_3_3v: 3-3-v-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| leds: gpio-leds { |
| compatible = "gpio-leds"; |
| |
| hps_led0 { |
| label = "hps:green:led0"; |
| gpios = <&portb 12 GPIO_ACTIVE_LOW>; |
| }; |
| |
| hps_led1 { |
| label = "hps:green:led1"; |
| gpios = <&portb 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| hps_led2 { |
| label = "hps:green:led2"; |
| gpios = <&portb 14 GPIO_ACTIVE_LOW>; |
| }; |
| |
| hps_led3 { |
| label = "hps:green:led3"; |
| gpios = <&portb 15 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &gmac1 { |
| status = "okay"; |
| phy-mode = "rgmii"; |
| phy = <&phy0>; |
| |
| mdio0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| rxd0-skew-ps = <0>; |
| rxd1-skew-ps = <0>; |
| rxd2-skew-ps = <0>; |
| rxd3-skew-ps = <0>; |
| rxdv-skew-ps = <0>; |
| rxc-skew-ps = <3000>; |
| txen-skew-ps = <0>; |
| txc-skew-ps = <3000>; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| eeprom@51 { |
| compatible = "atmel,24c32"; |
| reg = <0x51>; |
| pagesize = <32>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1339"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &mmc0 { |
| cd-gpios = <&portb 18 0>; |
| vmmc-supply = <®ulator_3_3v>; |
| vqmmc-supply = <®ulator_3_3v>; |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| |
| flash0: n25q512a@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "n25q512a"; |
| reg = <0>; |
| spi-max-frequency = <100000000>; |
| |
| m25p,fast-read; |
| cdns,page-size = <256>; |
| cdns,block-size = <16>; |
| cdns,read-delay = <4>; |
| cdns,tshsl-ns = <50>; |
| cdns,tsd2d-ns = <50>; |
| cdns,tchsh-ns = <4>; |
| cdns,tslch-ns = <4>; |
| }; |
| }; |