| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DTS file for all SPEAr1310 SoCs |
| * |
| * Copyright 2012 Viresh Kumar <vireshk@kernel.org> |
| */ |
| |
| /include/ "spear13xx.dtsi" |
| |
| / { |
| compatible = "st,spear1310"; |
| |
| ahb { |
| spics: spics@e0700000{ |
| compatible = "st,spear-spics-gpio"; |
| reg = <0xe0700000 0x1000>; |
| st-spics,peripcfg-reg = <0x3b0>; |
| st-spics,sw-enable-bit = <12>; |
| st-spics,cs-value-bit = <11>; |
| st-spics,cs-enable-mask = <3>; |
| st-spics,cs-enable-shift = <8>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| miphy0: miphy@eb800000 { |
| compatible = "st,spear1310-miphy"; |
| reg = <0xeb800000 0x4000>; |
| misc = <&misc>; |
| phy-id = <0>; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| miphy1: miphy@eb804000 { |
| compatible = "st,spear1310-miphy"; |
| reg = <0xeb804000 0x4000>; |
| misc = <&misc>; |
| phy-id = <1>; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| miphy2: miphy@eb808000 { |
| compatible = "st,spear1310-miphy"; |
| reg = <0xeb808000 0x4000>; |
| misc = <&misc>; |
| phy-id = <2>; |
| #phy-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| ahci0: ahci@b1000000 { |
| compatible = "snps,spear-ahci"; |
| reg = <0xb1000000 0x10000>; |
| interrupts = <0 68 0x4>; |
| phys = <&miphy0 0>; |
| phy-names = "sata-phy"; |
| status = "disabled"; |
| }; |
| |
| ahci1: ahci@b1800000 { |
| compatible = "snps,spear-ahci"; |
| reg = <0xb1800000 0x10000>; |
| interrupts = <0 69 0x4>; |
| phys = <&miphy1 0>; |
| phy-names = "sata-phy"; |
| status = "disabled"; |
| }; |
| |
| ahci2: ahci@b4000000 { |
| compatible = "snps,spear-ahci"; |
| reg = <0xb4000000 0x10000>; |
| interrupts = <0 70 0x4>; |
| phys = <&miphy2 0>; |
| phy-names = "sata-phy"; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@b1000000 { |
| compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; |
| reg-names = "dbi", "config"; |
| interrupts = <0 68 0x4>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0x0 0 &gic 0 68 0x4>; |
| num-lanes = <1>; |
| phys = <&miphy0 1>; |
| phy-names = "pcie-phy"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ |
| 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| bus-range = <0x00 0xff>; |
| status = "disabled"; |
| }; |
| |
| pcie1: pcie@b1800000 { |
| compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; |
| reg-names = "dbi", "config"; |
| interrupts = <0 69 0x4>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0x0 0 &gic 0 69 0x4>; |
| num-lanes = <1>; |
| phys = <&miphy1 1>; |
| phy-names = "pcie-phy"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ |
| 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| bus-range = <0x00 0xff>; |
| status = "disabled"; |
| }; |
| |
| pcie2: pcie@b4000000 { |
| compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; |
| reg-names = "dbi", "config"; |
| interrupts = <0 70 0x4>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0x0 0 &gic 0 70 0x4>; |
| num-lanes = <1>; |
| phys = <&miphy2 1>; |
| phy-names = "pcie-phy"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ |
| 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| bus-range = <0x00 0xff>; |
| status = "disabled"; |
| }; |
| |
| gmac1: eth@5c400000 { |
| compatible = "st,spear600-gmac"; |
| reg = <0x5c400000 0x8000>; |
| interrupts = <0 95 0x4>; |
| interrupt-names = "macirq"; |
| phy-mode = "mii"; |
| status = "disabled"; |
| }; |
| |
| gmac2: eth@5c500000 { |
| compatible = "st,spear600-gmac"; |
| reg = <0x5c500000 0x8000>; |
| interrupts = <0 96 0x4>; |
| interrupt-names = "macirq"; |
| phy-mode = "mii"; |
| status = "disabled"; |
| }; |
| |
| gmac3: eth@5c600000 { |
| compatible = "st,spear600-gmac"; |
| reg = <0x5c600000 0x8000>; |
| interrupts = <0 97 0x4>; |
| interrupt-names = "macirq"; |
| phy-mode = "rmii"; |
| status = "disabled"; |
| }; |
| |
| gmac4: eth@5c700000 { |
| compatible = "st,spear600-gmac"; |
| reg = <0x5c700000 0x8000>; |
| interrupts = <0 98 0x4>; |
| interrupt-names = "macirq"; |
| phy-mode = "rgmii"; |
| status = "disabled"; |
| }; |
| |
| pinmux: pinmux@e0700000 { |
| compatible = "st,spear1310-pinmux"; |
| reg = <0xe0700000 0x1000>; |
| #gpio-range-cells = <3>; |
| }; |
| |
| apb { |
| i2c1: i2c@5cd00000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5cd00000 0x1000>; |
| interrupts = <0 87 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@5ce00000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5ce00000 0x1000>; |
| interrupts = <0 88 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@5cf00000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5cf00000 0x1000>; |
| interrupts = <0 89 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@5d000000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5d000000 0x1000>; |
| interrupts = <0 90 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@5d100000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5d100000 0x1000>; |
| interrupts = <0 91 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@5d200000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5d200000 0x1000>; |
| interrupts = <0 92 0x4>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@5d300000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x5d300000 0x1000>; |
| interrupts = <0 93 0x4>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@5d400000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x5d400000 0x1000>; |
| interrupts = <0 99 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| serial@5c800000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x5c800000 0x1000>; |
| interrupts = <0 82 0x4>; |
| status = "disabled"; |
| }; |
| |
| serial@5c900000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x5c900000 0x1000>; |
| interrupts = <0 83 0x4>; |
| status = "disabled"; |
| }; |
| |
| serial@5ca00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x5ca00000 0x1000>; |
| interrupts = <0 84 0x4>; |
| status = "disabled"; |
| }; |
| |
| serial@5cb00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x5cb00000 0x1000>; |
| interrupts = <0 85 0x4>; |
| status = "disabled"; |
| }; |
| |
| serial@5cc00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x5cc00000 0x1000>; |
| interrupts = <0 86 0x4>; |
| status = "disabled"; |
| }; |
| |
| thermal@e07008c4 { |
| st,thermal-flags = <0x7000>; |
| }; |
| |
| gpiopinctrl: gpio@d8400000 { |
| compatible = "st,spear-plgpio"; |
| reg = <0xd8400000 0x1000>; |
| interrupts = <0 100 0x4>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pinmux 0 0 246>; |
| status = "disabled"; |
| |
| st-plgpio,ngpio = <246>; |
| st-plgpio,enb-reg = <0xd0>; |
| st-plgpio,wdata-reg = <0x90>; |
| st-plgpio,dir-reg = <0xb0>; |
| st-plgpio,ie-reg = <0x30>; |
| st-plgpio,rdata-reg = <0x70>; |
| st-plgpio,mis-reg = <0x10>; |
| st-plgpio,eit-reg = <0x50>; |
| }; |
| }; |
| }; |
| }; |
