| /* |
| * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "sunxi-h3-h5.dtsi" |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| cpu0_opp_table: opp_table0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-648000000 { |
| opp-hz = /bits/ 64 <648000000>; |
| opp-microvolt = <1040000 1040000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-816000000 { |
| opp-hz = /bits/ 64 <816000000>; |
| opp-microvolt = <1100000 1100000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| |
| opp-1008000000 { |
| opp-hz = /bits/ 64 <1008000000>; |
| opp-microvolt = <1200000 1200000 1300000>; |
| clock-latency-ns = <244144>; /* 8 32k periods */ |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <1>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <2>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <3>; |
| clocks = <&ccu CLK_CPUX>; |
| clock-names = "cpu"; |
| operating-points-v2 = <&cpu0_opp_table>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| gpu_opp_table: gpu-opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-120000000 { |
| opp-hz = /bits/ 64 <120000000>; |
| }; |
| |
| opp-312000000 { |
| opp-hz = /bits/ 64 <312000000>; |
| }; |
| |
| opp-432000000 { |
| opp-hz = /bits/ 64 <432000000>; |
| }; |
| |
| opp-576000000 { |
| opp-hz = /bits/ 64 <576000000>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| soc { |
| deinterlace: deinterlace@1400000 { |
| compatible = "allwinner,sun8i-h3-deinterlace"; |
| reg = <0x01400000 0x20000>; |
| clocks = <&ccu CLK_BUS_DEINTERLACE>, |
| <&ccu CLK_DEINTERLACE>, |
| <&ccu CLK_DRAM_DEINTERLACE>; |
| clock-names = "bus", "mod", "ram"; |
| resets = <&ccu RST_BUS_DEINTERLACE>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&mbus 9>; |
| interconnect-names = "dma-mem"; |
| }; |
| |
| syscon: system-control@1c00000 { |
| compatible = "allwinner,sun8i-h3-system-control"; |
| reg = <0x01c00000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_c: sram@1d00000 { |
| compatible = "mmio-sram"; |
| reg = <0x01d00000 0x80000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x01d00000 0x80000>; |
| |
| ve_sram: sram-section@0 { |
| compatible = "allwinner,sun8i-h3-sram-c1", |
| "allwinner,sun4i-a10-sram-c1"; |
| reg = <0x000000 0x80000>; |
| }; |
| }; |
| }; |
| |
| video-codec@1c0e000 { |
| compatible = "allwinner,sun8i-h3-video-engine"; |
| reg = <0x01c0e000 0x1000>; |
| clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| <&ccu CLK_DRAM_VE>; |
| clock-names = "ahb", "mod", "ram"; |
| resets = <&ccu RST_BUS_VE>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| allwinner,sram = <&ve_sram 1>; |
| }; |
| |
| crypto: crypto@1c15000 { |
| compatible = "allwinner,sun8i-h3-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_CE>; |
| }; |
| |
| mali: gpu@1c40000 { |
| compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; |
| reg = <0x01c40000 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gp", |
| "gpmmu", |
| "pp0", |
| "ppmmu0", |
| "pp1", |
| "ppmmu1", |
| "pmu"; |
| clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; |
| clock-names = "bus", "core"; |
| resets = <&ccu RST_BUS_GPU>; |
| operating-points-v2 = <&gpu_opp_table>; |
| }; |
| |
| ths: thermal-sensor@1c25000 { |
| compatible = "allwinner,sun8i-h3-ths"; |
| reg = <0x01c25000 0x400>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&ccu RST_BUS_THS>; |
| clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; |
| clock-names = "bus", "mod"; |
| nvmem-cells = <&ths_calibration>; |
| nvmem-cell-names = "calibration"; |
| #thermal-sensor-cells = <0>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 0>; |
| |
| trips { |
| cpu_hot_trip: cpu-hot { |
| temperature = <80000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_very_hot_trip: cpu-very-hot { |
| temperature = <100000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| cpu-hot-limit { |
| trip = <&cpu_hot_trip>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &ccu { |
| compatible = "allwinner,sun8i-h3-ccu"; |
| }; |
| |
| &display_clocks { |
| compatible = "allwinner,sun8i-h3-de2-clk"; |
| }; |
| |
| &mmc0 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| clocks = <&ccu CLK_BUS_MMC0>, |
| <&ccu CLK_MMC0>, |
| <&ccu CLK_MMC0_OUTPUT>, |
| <&ccu CLK_MMC0_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| }; |
| |
| &mmc1 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| clocks = <&ccu CLK_BUS_MMC1>, |
| <&ccu CLK_MMC1>, |
| <&ccu CLK_MMC1_OUTPUT>, |
| <&ccu CLK_MMC1_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| }; |
| |
| &mmc2 { |
| compatible = "allwinner,sun7i-a20-mmc"; |
| clocks = <&ccu CLK_BUS_MMC2>, |
| <&ccu CLK_MMC2>, |
| <&ccu CLK_MMC2_OUTPUT>, |
| <&ccu CLK_MMC2_SAMPLE>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| }; |
| |
| &pio { |
| compatible = "allwinner,sun8i-h3-pinctrl"; |
| }; |
| |
| &rtc { |
| compatible = "allwinner,sun8i-h3-rtc"; |
| }; |
| |
| &sid { |
| compatible = "allwinner,sun8i-h3-sid"; |
| }; |
