| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018-2021 NXP |
| * Dong Aisheng <aisheng.dong@nxp.com> |
| */ |
| |
| #include <dt-bindings/firmware/imx/rsrc.h> |
| #include <linux/arm-smccc.h> |
| #include <linux/bsearch.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| |
| #include "clk-scu.h" |
| |
| #define IMX_SIP_CPUFREQ 0xC2000001 |
| #define IMX_SIP_SET_CPUFREQ 0x00 |
| |
| static struct imx_sc_ipc *ccm_ipc_handle; |
| static struct device_node *pd_np; |
| static struct platform_driver imx_clk_scu_driver; |
| static const struct imx_clk_scu_rsrc_table *rsrc_table; |
| |
| struct imx_scu_clk_node { |
| const char *name; |
| u32 rsrc; |
| u8 clk_type; |
| const char * const *parents; |
| int num_parents; |
| |
| struct clk_hw *hw; |
| struct list_head node; |
| }; |
| |
| struct list_head imx_scu_clks[IMX_SC_R_LAST]; |
| |
| /* |
| * struct clk_scu - Description of one SCU clock |
| * @hw: the common clk_hw |
| * @rsrc_id: resource ID of this SCU clock |
| * @clk_type: type of this clock resource |
| */ |
| struct clk_scu { |
| struct clk_hw hw; |
| u16 rsrc_id; |
| u8 clk_type; |
| |
| /* for state save&restore */ |
| struct clk_hw *parent; |
| u8 parent_index; |
| bool is_enabled; |
| u32 rate; |
| }; |
| |
| /* |
| * struct clk_gpr_scu - Description of one SCU GPR clock |
| * @hw: the common clk_hw |
| * @rsrc_id: resource ID of this SCU clock |
| * @gpr_id: GPR ID index to control the divider |
| */ |
| struct clk_gpr_scu { |
| struct clk_hw hw; |
| u16 rsrc_id; |
| u8 gpr_id; |
| u8 flags; |
| bool gate_invert; |
| }; |
| |
| #define to_clk_gpr_scu(_hw) container_of(_hw, struct clk_gpr_scu, hw) |
| |
| /* |
| * struct imx_sc_msg_req_set_clock_rate - clock set rate protocol |
| * @hdr: SCU protocol header |
| * @rate: rate to set |
| * @resource: clock resource to set rate |
| * @clk: clk type of this resource |
| * |
| * This structure describes the SCU protocol of clock rate set |
| */ |
| struct imx_sc_msg_req_set_clock_rate { |
| struct imx_sc_rpc_msg hdr; |
| __le32 rate; |
| __le16 resource; |
| u8 clk; |
| } __packed __aligned(4); |
| |
| struct req_get_clock_rate { |
| __le16 resource; |
| u8 clk; |
| } __packed __aligned(4); |
| |
| struct resp_get_clock_rate { |
| __le32 rate; |
| }; |
| |
| /* |
| * struct imx_sc_msg_get_clock_rate - clock get rate protocol |
| * @hdr: SCU protocol header |
| * @req: get rate request protocol |
| * @resp: get rate response protocol |
| * |
| * This structure describes the SCU protocol of clock rate get |
| */ |
| struct imx_sc_msg_get_clock_rate { |
| struct imx_sc_rpc_msg hdr; |
| union { |
| struct req_get_clock_rate req; |
| struct resp_get_clock_rate resp; |
| } data; |
| }; |
| |
| /* |
| * struct imx_sc_msg_get_clock_parent - clock get parent protocol |
| * @hdr: SCU protocol header |
| * @req: get parent request protocol |
| * @resp: get parent response protocol |
| * |
| * This structure describes the SCU protocol of clock get parent |
| */ |
| struct imx_sc_msg_get_clock_parent { |
| struct imx_sc_rpc_msg hdr; |
| union { |
| struct req_get_clock_parent { |
| __le16 resource; |
| u8 clk; |
| } __packed __aligned(4) req; |
| struct resp_get_clock_parent { |
| u8 parent; |
| } resp; |
| } data; |
| }; |
| |
| /* |
| * struct imx_sc_msg_set_clock_parent - clock set parent protocol |
| * @hdr: SCU protocol header |
| * @req: set parent request protocol |
| * |
| * This structure describes the SCU protocol of clock set parent |
| */ |
| struct imx_sc_msg_set_clock_parent { |
| struct imx_sc_rpc_msg hdr; |
| __le16 resource; |
| u8 clk; |
| u8 parent; |
| } __packed; |
| |
| /* |
| * struct imx_sc_msg_req_clock_enable - clock gate protocol |
| * @hdr: SCU protocol header |
| * @resource: clock resource to gate |
| * @clk: clk type of this resource |
| * @enable: whether gate off the clock |
| * @autog: HW auto gate enable |
| * |
| * This structure describes the SCU protocol of clock gate |
| */ |
| struct imx_sc_msg_req_clock_enable { |
| struct imx_sc_rpc_msg hdr; |
| __le16 resource; |
| u8 clk; |
| u8 enable; |
| u8 autog; |
| } __packed __aligned(4); |
| |
| static inline struct clk_scu *to_clk_scu(struct clk_hw *hw) |
| { |
| return container_of(hw, struct clk_scu, hw); |
| } |
| |
| static inline int imx_scu_clk_search_cmp(const void *rsrc, const void *rsrc_p) |
| { |
| return *(u32 *)rsrc - *(u32 *)rsrc_p; |
| } |
| |
| static bool imx_scu_clk_is_valid(u32 rsrc_id) |
| { |
| void *p; |
| |
| if (!rsrc_table) |
| return true; |
| |
| p = bsearch(&rsrc_id, rsrc_table->rsrc, rsrc_table->num, |
| sizeof(rsrc_table->rsrc[0]), imx_scu_clk_search_cmp); |
| |
| return p != NULL; |
| } |
| |
| int imx_clk_scu_init(struct device_node *np, |
| const struct imx_clk_scu_rsrc_table *data) |
| { |
| u32 clk_cells; |
| int ret, i; |
| |
| ret = imx_scu_get_handle(&ccm_ipc_handle); |
| if (ret) |
| return ret; |
| |
| of_property_read_u32(np, "#clock-cells", &clk_cells); |
| |
| if (clk_cells == 2) { |
| for (i = 0; i < IMX_SC_R_LAST; i++) |
| INIT_LIST_HEAD(&imx_scu_clks[i]); |
| |
| /* pd_np will be used to attach power domains later */ |
| pd_np = of_find_compatible_node(NULL, NULL, "fsl,scu-pd"); |
| if (!pd_np) |
| return -EINVAL; |
| |
| rsrc_table = data; |
| } |
| |
| return platform_driver_register(&imx_clk_scu_driver); |
| } |
| |
| /* |
| * clk_scu_recalc_rate - Get clock rate for a SCU clock |
| * @hw: clock to get rate for |
| * @parent_rate: parent rate provided by common clock framework, not used |
| * |
| * Gets the current clock rate of a SCU clock. Returns the current |
| * clock rate, or zero in failure. |
| */ |
| static unsigned long clk_scu_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| struct imx_sc_msg_get_clock_rate msg; |
| struct imx_sc_rpc_msg *hdr = &msg.hdr; |
| int ret; |
| |
| hdr->ver = IMX_SC_RPC_VERSION; |
| hdr->svc = IMX_SC_RPC_SVC_PM; |
| hdr->func = IMX_SC_PM_FUNC_GET_CLOCK_RATE; |
| hdr->size = 2; |
| |
| msg.data.req.resource = cpu_to_le16(clk->rsrc_id); |
| msg.data.req.clk = clk->clk_type; |
| |
| ret = imx_scu_call_rpc(ccm_ipc_handle, &msg, true); |
| if (ret) { |
| pr_err("%s: failed to get clock rate %d\n", |
| clk_hw_get_name(hw), ret); |
| return 0; |
| } |
| |
| return le32_to_cpu(msg.data.resp.rate); |
| } |
| |
| /* |
| * clk_scu_round_rate - Round clock rate for a SCU clock |
| * @hw: clock to round rate for |
| * @rate: rate to round |
| * @parent_rate: parent rate provided by common clock framework, not used |
| * |
| * Returns the current clock rate, or zero in failure. |
| */ |
| static long clk_scu_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| /* |
| * Assume we support all the requested rate and let the SCU firmware |
| * to handle the left work |
| */ |
| return rate; |
| } |
| |
| static int clk_scu_atf_set_cpu_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| struct arm_smccc_res res; |
| unsigned long cluster_id; |
| |
| if (clk->rsrc_id == IMX_SC_R_A35 || clk->rsrc_id == IMX_SC_R_A53) |
| cluster_id = 0; |
| else if (clk->rsrc_id == IMX_SC_R_A72) |
| cluster_id = 1; |
| else |
| return -EINVAL; |
| |
| /* CPU frequency scaling can ONLY be done by ARM-Trusted-Firmware */ |
| arm_smccc_smc(IMX_SIP_CPUFREQ, IMX_SIP_SET_CPUFREQ, |
| cluster_id, rate, 0, 0, 0, 0, &res); |
| |
| return 0; |
| } |
| |
| /* |
| * clk_scu_set_rate - Set rate for a SCU clock |
| * @hw: clock to change rate for |
| * @rate: target rate for the clock |
| * @parent_rate: rate of the clock parent, not used for SCU clocks |
| * |
| * Sets a clock frequency for a SCU clock. Returns the SCU |
| * protocol status. |
| */ |
| static int clk_scu_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| struct imx_sc_msg_req_set_clock_rate msg; |
| struct imx_sc_rpc_msg *hdr = &msg.hdr; |
| |
| hdr->ver = IMX_SC_RPC_VERSION; |
| hdr->svc = IMX_SC_RPC_SVC_PM; |
| hdr->func = IMX_SC_PM_FUNC_SET_CLOCK_RATE; |
| hdr->size = 3; |
| |
| msg.rate = cpu_to_le32(rate); |
| msg.resource = cpu_to_le16(clk->rsrc_id); |
| msg.clk = clk->clk_type; |
| |
| return imx_scu_call_rpc(ccm_ipc_handle, &msg, true); |
| } |
| |
| static u8 clk_scu_get_parent(struct clk_hw *hw) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| struct imx_sc_msg_get_clock_parent msg; |
| struct imx_sc_rpc_msg *hdr = &msg.hdr; |
| int ret; |
| |
| hdr->ver = IMX_SC_RPC_VERSION; |
| hdr->svc = IMX_SC_RPC_SVC_PM; |
| hdr->func = IMX_SC_PM_FUNC_GET_CLOCK_PARENT; |
| hdr->size = 2; |
| |
| msg.data.req.resource = cpu_to_le16(clk->rsrc_id); |
| msg.data.req.clk = clk->clk_type; |
| |
| ret = imx_scu_call_rpc(ccm_ipc_handle, &msg, true); |
| if (ret) { |
| pr_err("%s: failed to get clock parent %d\n", |
| clk_hw_get_name(hw), ret); |
| return 0; |
| } |
| |
| clk->parent_index = msg.data.resp.parent; |
| |
| return msg.data.resp.parent; |
| } |
| |
| static int clk_scu_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| struct imx_sc_msg_set_clock_parent msg; |
| struct imx_sc_rpc_msg *hdr = &msg.hdr; |
| int ret; |
| |
| hdr->ver = IMX_SC_RPC_VERSION; |
| hdr->svc = IMX_SC_RPC_SVC_PM; |
| hdr->func = IMX_SC_PM_FUNC_SET_CLOCK_PARENT; |
| hdr->size = 2; |
| |
| msg.resource = cpu_to_le16(clk->rsrc_id); |
| msg.clk = clk->clk_type; |
| msg.parent = index; |
| |
| ret = imx_scu_call_rpc(ccm_ipc_handle, &msg, true); |
| if (ret) { |
| pr_err("%s: failed to set clock parent %d\n", |
| clk_hw_get_name(hw), ret); |
| return ret; |
| } |
| |
| clk->parent_index = index; |
| |
| return 0; |
| } |
| |
| static int sc_pm_clock_enable(struct imx_sc_ipc *ipc, u16 resource, |
| u8 clk, bool enable, bool autog) |
| { |
| struct imx_sc_msg_req_clock_enable msg; |
| struct imx_sc_rpc_msg *hdr = &msg.hdr; |
| |
| hdr->ver = IMX_SC_RPC_VERSION; |
| hdr->svc = IMX_SC_RPC_SVC_PM; |
| hdr->func = IMX_SC_PM_FUNC_CLOCK_ENABLE; |
| hdr->size = 3; |
| |
| msg.resource = cpu_to_le16(resource); |
| msg.clk = clk; |
| msg.enable = enable; |
| msg.autog = autog; |
| |
| return imx_scu_call_rpc(ccm_ipc_handle, &msg, true); |
| } |
| |
| /* |
| * clk_scu_prepare - Enable a SCU clock |
| * @hw: clock to enable |
| * |
| * Enable the clock at the DSC slice level |
| */ |
| static int clk_scu_prepare(struct clk_hw *hw) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| |
| return sc_pm_clock_enable(ccm_ipc_handle, clk->rsrc_id, |
| clk->clk_type, true, false); |
| } |
| |
| /* |
| * clk_scu_unprepare - Disable a SCU clock |
| * @hw: clock to enable |
| * |
| * Disable the clock at the DSC slice level |
| */ |
| static void clk_scu_unprepare(struct clk_hw *hw) |
| { |
| struct clk_scu *clk = to_clk_scu(hw); |
| int ret; |
| |
| ret = sc_pm_clock_enable(ccm_ipc_handle, clk->rsrc_id, |
| clk->clk_type, false, false); |
| if (ret) |
| pr_warn("%s: clk unprepare failed %d\n", clk_hw_get_name(hw), |
| ret); |
| } |
| |
| static const struct clk_ops clk_scu_ops = { |
| .recalc_rate = clk_scu_recalc_rate, |
| .round_rate = clk_scu_round_rate, |
| .set_rate = clk_scu_set_rate, |
| .get_parent = clk_scu_get_parent, |
| .set_parent = clk_scu_set_parent, |
| .prepare = clk_scu_prepare, |
| .unprepare = clk_scu_unprepare, |
| }; |
| |
| static const struct clk_ops clk_scu_cpu_ops = { |
| .recalc_rate = clk_scu_recalc_rate, |
| .round_rate = clk_scu_round_rate, |
| .set_rate = clk_scu_atf_set_cpu_rate, |
| .prepare = clk_scu_prepare, |
| .unprepare = clk_scu_unprepare, |
| }; |
| |
| static const struct clk_ops clk_scu_pi_ops = { |
| .recalc_rate = clk_scu_recalc_rate, |
| .round_rate = clk_scu_round_rate, |
| .set_rate = clk_scu_set_rate, |
| }; |
| |
| struct clk_hw *__imx_clk_scu(struct device *dev, const char *name, |
| const char * const *parents, int num_parents, |
| u32 rsrc_id, u8 clk_type) |
| { |
| struct clk_init_data init; |
| struct clk_scu *clk; |
| struct clk_hw *hw; |
| int ret; |
| |
| clk = kzalloc(sizeof(*clk), GFP_KERNEL); |
| if (!clk) |
| return ERR_PTR(-ENOMEM); |
| |
| clk->rsrc_id = rsrc_id; |
| clk->clk_type = clk_type; |
| |
| init.name = name; |
| init.ops = &clk_scu_ops; |
| if (rsrc_id == IMX_SC_R_A35 || rsrc_id == IMX_SC_R_A53 || rsrc_id == IMX_SC_R_A72) |
| init.ops = &clk_scu_cpu_ops; |
| else if (rsrc_id == IMX_SC_R_PI_0_PLL) |
| init.ops = &clk_scu_pi_ops; |
| else |
| init.ops = &clk_scu_ops; |
| init.parent_names = parents; |
| init.num_parents = num_parents; |
| |
| /* |
| * Note on MX8, the clocks are tightly coupled with power domain |
| * that once the power domain is off, the clock status may be |
| * lost. So we make it NOCACHE to let user to retrieve the real |
| * clock status from HW instead of using the possible invalid |
| * cached rate. |
| */ |
| init.flags = CLK_GET_RATE_NOCACHE; |
| clk->hw.init = &init; |
| |
| hw = &clk->hw; |
| ret = clk_hw_register(dev, hw); |
| if (ret) { |
| kfree(clk); |
| hw = ERR_PTR(ret); |
| return hw; |
| } |
| |
| if (dev) |
| dev_set_drvdata(dev, clk); |
| |
| return hw; |
| } |
| |
| struct clk_hw *imx_scu_of_clk_src_get(struct of_phandle_args *clkspec, |
| void *data) |
| { |
| unsigned int rsrc = clkspec->args[0]; |
| unsigned int idx = clkspec->args[1]; |
| struct list_head *scu_clks = data; |
| struct imx_scu_clk_node *clk; |
| |
| list_for_each_entry(clk, &scu_clks[rsrc], node) { |
| if (clk->clk_type == idx) |
| return clk->hw; |
| } |
| |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static int imx_clk_scu_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct imx_scu_clk_node *clk = dev_get_platdata(dev); |
| struct clk_hw *hw; |
| int ret; |
| |
| if (!((clk->rsrc == IMX_SC_R_A35) || (clk->rsrc == IMX_SC_R_A53) || |
| (clk->rsrc == IMX_SC_R_A72))) { |
| pm_runtime_set_suspended(dev); |
| pm_runtime_set_autosuspend_delay(dev, 50); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_enable(dev); |
| |
| ret = pm_runtime_get_sync(dev); |
| if (ret) { |
| pm_genpd_remove_device(dev); |
| pm_runtime_disable(dev); |
| return ret; |
| } |
| } |
| |
| hw = __imx_clk_scu(dev, clk->name, clk->parents, clk->num_parents, |
| clk->rsrc, clk->clk_type); |
| if (IS_ERR(hw)) { |
| pm_runtime_disable(dev); |
| return PTR_ERR(hw); |
| } |
| |
| clk->hw = hw; |
| list_add_tail(&clk->node, &imx_scu_clks[clk->rsrc]); |
| |
| if (!((clk->rsrc == IMX_SC_R_A35) || (clk->rsrc == IMX_SC_R_A53) || |
| (clk->rsrc == IMX_SC_R_A72))) { |
| pm_runtime_mark_last_busy(&pdev->dev); |
| pm_runtime_put_autosuspend(&pdev->dev); |
| } |
| |
| dev_dbg(dev, "register SCU clock rsrc:%d type:%d\n", clk->rsrc, |
| clk->clk_type); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused imx_clk_scu_suspend(struct device *dev) |
| { |
| struct clk_scu *clk = dev_get_drvdata(dev); |
| u32 rsrc_id = clk->rsrc_id; |
| |
| if ((rsrc_id == IMX_SC_R_A35) || (rsrc_id == IMX_SC_R_A53) || |
| (rsrc_id == IMX_SC_R_A72)) |
| return 0; |
| |
| clk->parent = clk_hw_get_parent(&clk->hw); |
| |
| /* DC SS needs to handle bypass clock using non-cached clock rate */ |
| if (clk->rsrc_id == IMX_SC_R_DC_0_VIDEO0 || |
| clk->rsrc_id == IMX_SC_R_DC_0_VIDEO1 || |
| clk->rsrc_id == IMX_SC_R_DC_1_VIDEO0 || |
| clk->rsrc_id == IMX_SC_R_DC_1_VIDEO1) |
| clk->rate = clk_scu_recalc_rate(&clk->hw, 0); |
| else |
| clk->rate = clk_hw_get_rate(&clk->hw); |
| clk->is_enabled = clk_hw_is_enabled(&clk->hw); |
| |
| if (clk->parent) |
| dev_dbg(dev, "save parent %s idx %u\n", clk_hw_get_name(clk->parent), |
| clk->parent_index); |
| |
| if (clk->rate) |
| dev_dbg(dev, "save rate %d\n", clk->rate); |
| |
| if (clk->is_enabled) |
| dev_dbg(dev, "save enabled state\n"); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused imx_clk_scu_resume(struct device *dev) |
| { |
| struct clk_scu *clk = dev_get_drvdata(dev); |
| u32 rsrc_id = clk->rsrc_id; |
| int ret = 0; |
| |
| if ((rsrc_id == IMX_SC_R_A35) || (rsrc_id == IMX_SC_R_A53) || |
| (rsrc_id == IMX_SC_R_A72)) |
| return 0; |
| |
| if (clk->parent) { |
| ret = clk_scu_set_parent(&clk->hw, clk->parent_index); |
| dev_dbg(dev, "restore parent %s idx %u %s\n", |
| clk_hw_get_name(clk->parent), |
| clk->parent_index, !ret ? "success" : "failed"); |
| } |
| |
| if (clk->rate) { |
| ret = clk_scu_set_rate(&clk->hw, clk->rate, 0); |
| dev_dbg(dev, "restore rate %d %s\n", clk->rate, |
| !ret ? "success" : "failed"); |
| } |
| |
| if (clk->is_enabled && rsrc_id != IMX_SC_R_PI_0_PLL) { |
| ret = clk_scu_prepare(&clk->hw); |
| dev_dbg(dev, "restore enabled state %s\n", |
| !ret ? "success" : "failed"); |
| } |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops imx_clk_scu_pm_ops = { |
| SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_clk_scu_suspend, |
| imx_clk_scu_resume) |
| }; |
| |
| static struct platform_driver imx_clk_scu_driver = { |
| .driver = { |
| .name = "imx-scu-clk", |
| .suppress_bind_attrs = true, |
| .pm = &imx_clk_scu_pm_ops, |
| }, |
| .probe = imx_clk_scu_probe, |
| }; |
| |
| static int imx_clk_scu_attach_pd(struct device *dev, u32 rsrc_id) |
| { |
| struct of_phandle_args genpdspec = { |
| .np = pd_np, |
| .args_count = 1, |
| .args[0] = rsrc_id, |
| }; |
| |
| if (rsrc_id == IMX_SC_R_A35 || rsrc_id == IMX_SC_R_A53 || |
| rsrc_id == IMX_SC_R_A72) |
| return 0; |
| |
| return of_genpd_add_device(&genpdspec, dev); |
| } |
| |
| struct clk_hw *imx_clk_scu_alloc_dev(const char *name, |
| const char * const *parents, |
| int num_parents, u32 rsrc_id, u8 clk_type) |
| { |
| struct imx_scu_clk_node clk = { |
| .name = name, |
| .rsrc = rsrc_id, |
| .clk_type = clk_type, |
| .parents = parents, |
| .num_parents = num_parents, |
| }; |
| struct platform_device *pdev; |
| int ret; |
| |
| if (!imx_scu_clk_is_valid(rsrc_id)) |
| return ERR_PTR(-EINVAL); |
| |
| pdev = platform_device_alloc(name, PLATFORM_DEVID_NONE); |
| if (!pdev) { |
| pr_err("%s: failed to allocate scu clk dev rsrc %d type %d\n", |
| name, rsrc_id, clk_type); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| ret = platform_device_add_data(pdev, &clk, sizeof(clk)); |
| if (ret) { |
| platform_device_put(pdev); |
| return ERR_PTR(ret); |
| } |
| |
| pdev->driver_override = "imx-scu-clk"; |
| |
| ret = imx_clk_scu_attach_pd(&pdev->dev, rsrc_id); |
| if (ret) |
| pr_warn("%s: failed to attached the power domain %d\n", |
| name, ret); |
| |
| platform_device_add(pdev); |
| |
| /* For API backwards compatiblilty, simply return NULL for success */ |
| return NULL; |
| } |
| |
| void imx_clk_scu_unregister(void) |
| { |
| struct imx_scu_clk_node *clk; |
| int i; |
| |
| for (i = 0; i < IMX_SC_R_LAST; i++) { |
| list_for_each_entry(clk, &imx_scu_clks[i], node) { |
| clk_hw_unregister(clk->hw); |
| kfree(clk); |
| } |
| } |
| } |
| |
| static unsigned long clk_gpr_div_scu_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| unsigned long rate = 0; |
| u32 val; |
| int err; |
| |
| err = imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, &val); |
| |
| rate = val ? parent_rate / 2 : parent_rate; |
| |
| return err ? 0 : rate; |
| } |
| |
| static long clk_gpr_div_scu_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| if (rate < *prate) |
| rate = *prate / 2; |
| else |
| rate = *prate; |
| |
| return rate; |
| } |
| |
| static int clk_gpr_div_scu_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| uint32_t val; |
| int err; |
| |
| val = (rate < parent_rate) ? 1 : 0; |
| err = imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, val); |
| |
| return err ? -EINVAL : 0; |
| } |
| |
| static const struct clk_ops clk_gpr_div_scu_ops = { |
| .recalc_rate = clk_gpr_div_scu_recalc_rate, |
| .round_rate = clk_gpr_div_scu_round_rate, |
| .set_rate = clk_gpr_div_scu_set_rate, |
| }; |
| |
| static u8 clk_gpr_mux_scu_get_parent(struct clk_hw *hw) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| u32 val = 0; |
| |
| imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, &val); |
| |
| return (u8)val; |
| } |
| |
| static int clk_gpr_mux_scu_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| |
| return imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, index); |
| } |
| |
| static const struct clk_ops clk_gpr_mux_scu_ops = { |
| .get_parent = clk_gpr_mux_scu_get_parent, |
| .set_parent = clk_gpr_mux_scu_set_parent, |
| }; |
| |
| static int clk_gpr_gate_scu_prepare(struct clk_hw *hw) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| |
| return imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, !clk->gate_invert); |
| } |
| |
| static void clk_gpr_gate_scu_unprepare(struct clk_hw *hw) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| int ret; |
| |
| ret = imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, clk->gate_invert); |
| if (ret) |
| pr_err("%s: clk unprepare failed %d\n", clk_hw_get_name(hw), |
| ret); |
| } |
| |
| static int clk_gpr_gate_scu_is_prepared(struct clk_hw *hw) |
| { |
| struct clk_gpr_scu *clk = to_clk_gpr_scu(hw); |
| int ret; |
| u32 val; |
| |
| ret = imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id, |
| clk->gpr_id, &val); |
| if (ret) |
| return ret; |
| |
| return clk->gate_invert ? !val : val; |
| } |
| |
| static const struct clk_ops clk_gpr_gate_scu_ops = { |
| .prepare = clk_gpr_gate_scu_prepare, |
| .unprepare = clk_gpr_gate_scu_unprepare, |
| .is_prepared = clk_gpr_gate_scu_is_prepared, |
| }; |
| |
| struct clk_hw *__imx_clk_gpr_scu(const char *name, const char * const *parent_name, |
| int num_parents, u32 rsrc_id, u8 gpr_id, u8 flags, |
| bool invert) |
| { |
| struct imx_scu_clk_node *clk_node; |
| struct clk_gpr_scu *clk; |
| struct clk_hw *hw; |
| struct clk_init_data init; |
| int ret; |
| |
| if (rsrc_id >= IMX_SC_R_LAST || gpr_id >= IMX_SC_C_LAST) |
| return ERR_PTR(-EINVAL); |
| |
| clk_node = kzalloc(sizeof(*clk_node), GFP_KERNEL); |
| if (!clk_node) |
| return ERR_PTR(-ENOMEM); |
| |
| if (!imx_scu_clk_is_valid(rsrc_id)) |
| return ERR_PTR(-EINVAL); |
| |
| clk = kzalloc(sizeof(*clk), GFP_KERNEL); |
| if (!clk) { |
| kfree(clk_node); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| clk->rsrc_id = rsrc_id; |
| clk->gpr_id = gpr_id; |
| clk->flags = flags; |
| clk->gate_invert = invert; |
| |
| if (flags & IMX_SCU_GPR_CLK_GATE) |
| init.ops = &clk_gpr_gate_scu_ops; |
| |
| if (flags & IMX_SCU_GPR_CLK_DIV) |
| init.ops = &clk_gpr_div_scu_ops; |
| |
| if (flags & IMX_SCU_GPR_CLK_MUX) |
| init.ops = &clk_gpr_mux_scu_ops; |
| |
| init.flags = 0; |
| init.name = name; |
| init.parent_names = parent_name; |
| init.num_parents = num_parents; |
| |
| clk->hw.init = &init; |
| |
| hw = &clk->hw; |
| ret = clk_hw_register(NULL, hw); |
| if (ret) { |
| kfree(clk); |
| kfree(clk_node); |
| hw = ERR_PTR(ret); |
| } else { |
| clk_node->hw = hw; |
| clk_node->clk_type = gpr_id; |
| list_add_tail(&clk_node->node, &imx_scu_clks[rsrc_id]); |
| } |
| |
| return hw; |
| } |