| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2010 Matt Turner. |
| * Copyright 2012 Red Hat |
| * |
| * Authors: Matthew Garrett |
| * Matt Turner |
| * Dave Airlie |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/dma-buf-map.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_atomic_state_helper.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_format_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_simple_kms_helper.h> |
| |
| #include "mgag200_drv.h" |
| |
| #define MGAG200_LUT_SIZE 256 |
| |
| /* |
| * This file contains setup code for the CRTC. |
| */ |
| |
| static void mga_crtc_load_lut(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct mga_device *mdev = to_mga_device(dev); |
| struct drm_framebuffer *fb; |
| u16 *r_ptr, *g_ptr, *b_ptr; |
| int i; |
| |
| if (!crtc->enabled) |
| return; |
| |
| if (!mdev->display_pipe.plane.state) |
| return; |
| |
| fb = mdev->display_pipe.plane.state->fb; |
| |
| r_ptr = crtc->gamma_store; |
| g_ptr = r_ptr + crtc->gamma_size; |
| b_ptr = g_ptr + crtc->gamma_size; |
| |
| WREG8(DAC_INDEX + MGA1064_INDEX, 0); |
| |
| if (fb && fb->format->cpp[0] * 8 == 16) { |
| int inc = (fb->format->depth == 15) ? 8 : 4; |
| u8 r, b; |
| for (i = 0; i < MGAG200_LUT_SIZE; i += inc) { |
| if (fb->format->depth == 16) { |
| if (i > (MGAG200_LUT_SIZE >> 1)) { |
| r = b = 0; |
| } else { |
| r = *r_ptr++ >> 8; |
| b = *b_ptr++ >> 8; |
| r_ptr++; |
| b_ptr++; |
| } |
| } else { |
| r = *r_ptr++ >> 8; |
| b = *b_ptr++ >> 8; |
| } |
| /* VGA registers */ |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, r); |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8); |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, b); |
| } |
| return; |
| } |
| for (i = 0; i < MGAG200_LUT_SIZE; i++) { |
| /* VGA registers */ |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, *r_ptr++ >> 8); |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8); |
| WREG8(DAC_INDEX + MGA1064_COL_PAL, *b_ptr++ >> 8); |
| } |
| } |
| |
| static inline void mga_wait_vsync(struct mga_device *mdev) |
| { |
| unsigned long timeout = jiffies + HZ/10; |
| unsigned int status = 0; |
| |
| do { |
| status = RREG32(MGAREG_Status); |
| } while ((status & 0x08) && time_before(jiffies, timeout)); |
| timeout = jiffies + HZ/10; |
| status = 0; |
| do { |
| status = RREG32(MGAREG_Status); |
| } while (!(status & 0x08) && time_before(jiffies, timeout)); |
| } |
| |
| static inline void mga_wait_busy(struct mga_device *mdev) |
| { |
| unsigned long timeout = jiffies + HZ; |
| unsigned int status = 0; |
| do { |
| status = RREG8(MGAREG_Status + 2); |
| } while ((status & 0x01) && time_before(jiffies, timeout)); |
| } |
| |
| static void mgag200_g200wb_hold_bmc(struct mga_device *mdev) |
| { |
| u8 tmp; |
| int iter_max; |
| |
| /* 1- The first step is to warn the BMC of an upcoming mode change. |
| * We are putting the misc<0> to output.*/ |
| |
| WREG8(DAC_INDEX, MGA1064_GEN_IO_CTL); |
| tmp = RREG8(DAC_DATA); |
| tmp |= 0x10; |
| WREG_DAC(MGA1064_GEN_IO_CTL, tmp); |
| |
| /* we are putting a 1 on the misc<0> line */ |
| WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA); |
| tmp = RREG8(DAC_DATA); |
| tmp |= 0x10; |
| WREG_DAC(MGA1064_GEN_IO_DATA, tmp); |
| |
| /* 2- Second step to mask and further scan request |
| * This will be done by asserting the remfreqmsk bit (XSPAREREG<7>) |
| */ |
| WREG8(DAC_INDEX, MGA1064_SPAREREG); |
| tmp = RREG8(DAC_DATA); |
| tmp |= 0x80; |
| WREG_DAC(MGA1064_SPAREREG, tmp); |
| |
| /* 3a- the third step is to verifu if there is an active scan |
| * We are searching for a 0 on remhsyncsts <XSPAREREG<0>) |
| */ |
| iter_max = 300; |
| while (!(tmp & 0x1) && iter_max) { |
| WREG8(DAC_INDEX, MGA1064_SPAREREG); |
| tmp = RREG8(DAC_DATA); |
| udelay(1000); |
| iter_max--; |
| } |
| |
| /* 3b- this step occurs only if the remove is actually scanning |
| * we are waiting for the end of the frame which is a 1 on |
| * remvsyncsts (XSPAREREG<1>) |
| */ |
| if (iter_max) { |
| iter_max = 300; |
| while ((tmp & 0x2) && iter_max) { |
| WREG8(DAC_INDEX, MGA1064_SPAREREG); |
| tmp = RREG8(DAC_DATA); |
| udelay(1000); |
| iter_max--; |
| } |
| } |
| } |
| |
| static void mgag200_g200wb_release_bmc(struct mga_device *mdev) |
| { |
| u8 tmp; |
| |
| /* 1- The first step is to ensure that the vrsten and hrsten are set */ |
| WREG8(MGAREG_CRTCEXT_INDEX, 1); |
| tmp = RREG8(MGAREG_CRTCEXT_DATA); |
| WREG8(MGAREG_CRTCEXT_DATA, tmp | 0x88); |
| |
| /* 2- second step is to assert the rstlvl2 */ |
| WREG8(DAC_INDEX, MGA1064_REMHEADCTL2); |
| tmp = RREG8(DAC_DATA); |
| tmp |= 0x8; |
| WREG8(DAC_DATA, tmp); |
| |
| /* wait 10 us */ |
| udelay(10); |
| |
| /* 3- deassert rstlvl2 */ |
| tmp &= ~0x08; |
| WREG8(DAC_INDEX, MGA1064_REMHEADCTL2); |
| WREG8(DAC_DATA, tmp); |
| |
| /* 4- remove mask of scan request */ |
| WREG8(DAC_INDEX, MGA1064_SPAREREG); |
| tmp = RREG8(DAC_DATA); |
| tmp &= ~0x80; |
| WREG8(DAC_DATA, tmp); |
| |
| /* 5- put back a 0 on the misc<0> line */ |
| WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA); |
| tmp = RREG8(DAC_DATA); |
| tmp &= ~0x10; |
| WREG_DAC(MGA1064_GEN_IO_DATA, tmp); |
| } |
| |
| /* |
| * This is how the framebuffer base address is stored in g200 cards: |
| * * Assume @offset is the gpu_addr variable of the framebuffer object |
| * * Then addr is the number of _pixels_ (not bytes) from the start of |
| * VRAM to the first pixel we want to display. (divided by 2 for 32bit |
| * framebuffers) |
| * * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers |
| * addr<20> -> CRTCEXT0<6> |
| * addr<19-16> -> CRTCEXT0<3-0> |
| * addr<15-8> -> CRTCC<7-0> |
| * addr<7-0> -> CRTCD<7-0> |
| * |
| * CRTCEXT0 has to be programmed last to trigger an update and make the |
| * new addr variable take effect. |
| */ |
| static void mgag200_set_startadd(struct mga_device *mdev, |
| unsigned long offset) |
| { |
| struct drm_device *dev = &mdev->base; |
| u32 startadd; |
| u8 crtcc, crtcd, crtcext0; |
| |
| startadd = offset / 8; |
| |
| /* |
| * Can't store addresses any higher than that, but we also |
| * don't have more than 16 MiB of memory, so it should be fine. |
| */ |
| drm_WARN_ON(dev, startadd > 0x1fffff); |
| |
| RREG_ECRT(0x00, crtcext0); |
| |
| crtcc = (startadd >> 8) & 0xff; |
| crtcd = startadd & 0xff; |
| crtcext0 &= 0xb0; |
| crtcext0 |= ((startadd >> 14) & BIT(6)) | |
| ((startadd >> 16) & 0x0f); |
| |
| WREG_CRT(0x0c, crtcc); |
| WREG_CRT(0x0d, crtcd); |
| WREG_ECRT(0x00, crtcext0); |
| } |
| |
| static void mgag200_set_dac_regs(struct mga_device *mdev) |
| { |
| size_t i; |
| u8 dacvalue[] = { |
| /* 0x00: */ 0, 0, 0, 0, 0, 0, 0x00, 0, |
| /* 0x08: */ 0, 0, 0, 0, 0, 0, 0, 0, |
| /* 0x10: */ 0, 0, 0, 0, 0, 0, 0, 0, |
| /* 0x18: */ 0x00, 0, 0xC9, 0xFF, 0xBF, 0x20, 0x1F, 0x20, |
| /* 0x20: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| /* 0x28: */ 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x40, |
| /* 0x30: */ 0x00, 0xB0, 0x00, 0xC2, 0x34, 0x14, 0x02, 0x83, |
| /* 0x38: */ 0x00, 0x93, 0x00, 0x77, 0x00, 0x00, 0x00, 0x3A, |
| /* 0x40: */ 0, 0, 0, 0, 0, 0, 0, 0, |
| /* 0x48: */ 0, 0, 0, 0, 0, 0, 0, 0 |
| }; |
| |
| switch (mdev->type) { |
| case G200_PCI: |
| case G200_AGP: |
| dacvalue[MGA1064_SYS_PLL_M] = 0x04; |
| dacvalue[MGA1064_SYS_PLL_N] = 0x2D; |
| dacvalue[MGA1064_SYS_PLL_P] = 0x19; |
| break; |
| case G200_SE_A: |
| case G200_SE_B: |
| dacvalue[MGA1064_VREF_CTL] = 0x03; |
| dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL; |
| dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_DAC_EN | |
| MGA1064_MISC_CTL_VGA8 | |
| MGA1064_MISC_CTL_DAC_RAM_CS; |
| break; |
| case G200_WB: |
| case G200_EW3: |
| dacvalue[MGA1064_VREF_CTL] = 0x07; |
| break; |
| case G200_EV: |
| dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL; |
| dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 | |
| MGA1064_MISC_CTL_DAC_RAM_CS; |
| break; |
| case G200_EH: |
| case G200_EH3: |
| dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 | |
| MGA1064_MISC_CTL_DAC_RAM_CS; |
| break; |
| case G200_ER: |
| break; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(dacvalue); i++) { |
| if ((i <= 0x17) || |
| (i == 0x1b) || |
| (i == 0x1c) || |
| ((i >= 0x1f) && (i <= 0x29)) || |
| ((i >= 0x30) && (i <= 0x37))) |
| continue; |
| if (IS_G200_SE(mdev) && |
| ((i == 0x2c) || (i == 0x2d) || (i == 0x2e))) |
| continue; |
| if ((mdev->type == G200_EV || |
| mdev->type == G200_WB || |
| mdev->type == G200_EH || |
| mdev->type == G200_EW3 || |
| mdev->type == G200_EH3) && |
| (i >= 0x44) && (i <= 0x4e)) |
| continue; |
| |
| WREG_DAC(i, dacvalue[i]); |
| } |
| |
| if (mdev->type == G200_ER) |
| WREG_DAC(0x90, 0); |
| } |
| |
| static void mgag200_init_regs(struct mga_device *mdev) |
| { |
| u8 crtc11, misc; |
| |
| mgag200_set_dac_regs(mdev); |
| |
| WREG_SEQ(2, 0x0f); |
| WREG_SEQ(3, 0x00); |
| WREG_SEQ(4, 0x0e); |
| |
| WREG_CRT(10, 0); |
| WREG_CRT(11, 0); |
| WREG_CRT(12, 0); |
| WREG_CRT(13, 0); |
| WREG_CRT(14, 0); |
| WREG_CRT(15, 0); |
| |
| RREG_CRT(0x11, crtc11); |
| crtc11 &= ~(MGAREG_CRTC11_CRTCPROTECT | |
| MGAREG_CRTC11_VINTEN | |
| MGAREG_CRTC11_VINTCLR); |
| WREG_CRT(0x11, crtc11); |
| |
| if (mdev->type == G200_ER) |
| WREG_ECRT(0x24, 0x5); |
| |
| if (mdev->type == G200_EW3) |
| WREG_ECRT(0x34, 0x5); |
| |
| misc = RREG8(MGA_MISC_IN); |
| misc |= MGAREG_MISC_IOADSEL; |
| WREG8(MGA_MISC_OUT, misc); |
| } |
| |
| static void mgag200_set_mode_regs(struct mga_device *mdev, |
| const struct drm_display_mode *mode) |
| { |
| unsigned int hdisplay, hsyncstart, hsyncend, htotal; |
| unsigned int vdisplay, vsyncstart, vsyncend, vtotal; |
| u8 misc, crtcext1, crtcext2, crtcext5; |
| |
| hdisplay = mode->hdisplay / 8 - 1; |
| hsyncstart = mode->hsync_start / 8 - 1; |
| hsyncend = mode->hsync_end / 8 - 1; |
| htotal = mode->htotal / 8 - 1; |
| |
| /* Work around hardware quirk */ |
| if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04) |
| htotal++; |
| |
| vdisplay = mode->vdisplay - 1; |
| vsyncstart = mode->vsync_start - 1; |
| vsyncend = mode->vsync_end - 1; |
| vtotal = mode->vtotal - 2; |
| |
| misc = RREG8(MGA_MISC_IN); |
| |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| misc |= MGAREG_MISC_HSYNCPOL; |
| else |
| misc &= ~MGAREG_MISC_HSYNCPOL; |
| |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| misc |= MGAREG_MISC_VSYNCPOL; |
| else |
| misc &= ~MGAREG_MISC_VSYNCPOL; |
| |
| crtcext1 = (((htotal - 4) & 0x100) >> 8) | |
| ((hdisplay & 0x100) >> 7) | |
| ((hsyncstart & 0x100) >> 6) | |
| (htotal & 0x40); |
| if (mdev->type == G200_WB || mdev->type == G200_EW3) |
| crtcext1 |= BIT(7) | /* vrsten */ |
| BIT(3); /* hrsten */ |
| |
| crtcext2 = ((vtotal & 0xc00) >> 10) | |
| ((vdisplay & 0x400) >> 8) | |
| ((vdisplay & 0xc00) >> 7) | |
| ((vsyncstart & 0xc00) >> 5) | |
| ((vdisplay & 0x400) >> 3); |
| crtcext5 = 0x00; |
| |
| WREG_CRT(0, htotal - 4); |
| WREG_CRT(1, hdisplay); |
| WREG_CRT(2, hdisplay); |
| WREG_CRT(3, (htotal & 0x1F) | 0x80); |
| WREG_CRT(4, hsyncstart); |
| WREG_CRT(5, ((htotal & 0x20) << 2) | (hsyncend & 0x1F)); |
| WREG_CRT(6, vtotal & 0xFF); |
| WREG_CRT(7, ((vtotal & 0x100) >> 8) | |
| ((vdisplay & 0x100) >> 7) | |
| ((vsyncstart & 0x100) >> 6) | |
| ((vdisplay & 0x100) >> 5) | |
| ((vdisplay & 0x100) >> 4) | /* linecomp */ |
| ((vtotal & 0x200) >> 4) | |
| ((vdisplay & 0x200) >> 3) | |
| ((vsyncstart & 0x200) >> 2)); |
| WREG_CRT(9, ((vdisplay & 0x200) >> 4) | |
| ((vdisplay & 0x200) >> 3)); |
| WREG_CRT(16, vsyncstart & 0xFF); |
| WREG_CRT(17, (vsyncend & 0x0F) | 0x20); |
| WREG_CRT(18, vdisplay & 0xFF); |
| WREG_CRT(20, 0); |
| WREG_CRT(21, vdisplay & 0xFF); |
| WREG_CRT(22, (vtotal + 1) & 0xFF); |
| WREG_CRT(23, 0xc3); |
| WREG_CRT(24, vdisplay & 0xFF); |
| |
| WREG_ECRT(0x01, crtcext1); |
| WREG_ECRT(0x02, crtcext2); |
| WREG_ECRT(0x05, crtcext5); |
| |
| WREG8(MGA_MISC_OUT, misc); |
| } |
| |
| static u8 mgag200_get_bpp_shift(const struct drm_format_info *format) |
| { |
| static const u8 bpp_shift[] = {0, 1, 0, 2}; |
| |
| return bpp_shift[format->cpp[0] - 1]; |
| } |
| |
| /* |
| * Calculates the HW offset value from the framebuffer's pitch. The |
| * offset is a multiple of the pixel size and depends on the display |
| * format. |
| */ |
| static u32 mgag200_calculate_offset(struct mga_device *mdev, |
| const struct drm_framebuffer *fb) |
| { |
| u32 offset = fb->pitches[0] / fb->format->cpp[0]; |
| u8 bppshift = mgag200_get_bpp_shift(fb->format); |
| |
| if (fb->format->cpp[0] * 8 == 24) |
| offset = (offset * 3) >> (4 - bppshift); |
| else |
| offset = offset >> (4 - bppshift); |
| |
| return offset; |
| } |
| |
| static void mgag200_set_offset(struct mga_device *mdev, |
| const struct drm_framebuffer *fb) |
| { |
| u8 crtc13, crtcext0; |
| u32 offset = mgag200_calculate_offset(mdev, fb); |
| |
| RREG_ECRT(0, crtcext0); |
| |
| crtc13 = offset & 0xff; |
| |
| crtcext0 &= ~MGAREG_CRTCEXT0_OFFSET_MASK; |
| crtcext0 |= (offset >> 4) & MGAREG_CRTCEXT0_OFFSET_MASK; |
| |
| WREG_CRT(0x13, crtc13); |
| WREG_ECRT(0x00, crtcext0); |
| } |
| |
| static void mgag200_set_format_regs(struct mga_device *mdev, |
| const struct drm_framebuffer *fb) |
| { |
| struct drm_device *dev = &mdev->base; |
| const struct drm_format_info *format = fb->format; |
| unsigned int bpp, bppshift, scale; |
| u8 crtcext3, xmulctrl; |
| |
| bpp = format->cpp[0] * 8; |
| |
| bppshift = mgag200_get_bpp_shift(format); |
| switch (bpp) { |
| case 24: |
| scale = ((1 << bppshift) * 3) - 1; |
| break; |
| default: |
| scale = (1 << bppshift) - 1; |
| break; |
| } |
| |
| RREG_ECRT(3, crtcext3); |
| |
| switch (bpp) { |
| case 8: |
| xmulctrl = MGA1064_MUL_CTL_8bits; |
| break; |
| case 16: |
| if (format->depth == 15) |
| xmulctrl = MGA1064_MUL_CTL_15bits; |
| else |
| xmulctrl = MGA1064_MUL_CTL_16bits; |
| break; |
| case 24: |
| xmulctrl = MGA1064_MUL_CTL_24bits; |
| break; |
| case 32: |
| xmulctrl = MGA1064_MUL_CTL_32_24bits; |
| break; |
| default: |
| /* BUG: We should have caught this problem already. */ |
| drm_WARN_ON(dev, "invalid format depth\n"); |
| return; |
| } |
| |
| crtcext3 &= ~GENMASK(2, 0); |
| crtcext3 |= scale; |
| |
| WREG_DAC(MGA1064_MUL_CTL, xmulctrl); |
| |
| WREG_GFX(0, 0x00); |
| WREG_GFX(1, 0x00); |
| WREG_GFX(2, 0x00); |
| WREG_GFX(3, 0x00); |
| WREG_GFX(4, 0x00); |
| WREG_GFX(5, 0x40); |
| WREG_GFX(6, 0x05); |
| WREG_GFX(7, 0x0f); |
| WREG_GFX(8, 0x0f); |
| |
| WREG_ECRT(3, crtcext3); |
| } |
| |
| static void mgag200_g200er_reset_tagfifo(struct mga_device *mdev) |
| { |
| static uint32_t RESET_FLAG = 0x00200000; /* undocumented magic value */ |
| u32 memctl; |
| |
| memctl = RREG32(MGAREG_MEMCTL); |
| |
| memctl |= RESET_FLAG; |
| WREG32(MGAREG_MEMCTL, memctl); |
| |
| udelay(1000); |
| |
| memctl &= ~RESET_FLAG; |
| WREG32(MGAREG_MEMCTL, memctl); |
| } |
| |
| static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev, |
| const struct drm_display_mode *mode, |
| const struct drm_framebuffer *fb) |
| { |
| u32 unique_rev_id = mdev->model.g200se.unique_rev_id; |
| unsigned int hiprilvl; |
| u8 crtcext6; |
| |
| if (unique_rev_id >= 0x04) { |
| hiprilvl = 0; |
| } else if (unique_rev_id >= 0x02) { |
| unsigned int bpp; |
| unsigned long mb; |
| |
| if (fb->format->cpp[0] * 8 > 16) |
| bpp = 32; |
| else if (fb->format->cpp[0] * 8 > 8) |
| bpp = 16; |
| else |
| bpp = 8; |
| |
| mb = (mode->clock * bpp) / 1000; |
| if (mb > 3100) |
| hiprilvl = 0; |
| else if (mb > 2600) |
| hiprilvl = 1; |
| else if (mb > 1900) |
| hiprilvl = 2; |
| else if (mb > 1160) |
| hiprilvl = 3; |
| else if (mb > 440) |
| hiprilvl = 4; |
| else |
| hiprilvl = 5; |
| |
| } else if (unique_rev_id >= 0x01) { |
| hiprilvl = 3; |
| } else { |
| hiprilvl = 4; |
| } |
| |
| crtcext6 = hiprilvl; /* implicitly sets maxhipri to 0 */ |
| |
| WREG_ECRT(0x06, crtcext6); |
| } |
| |
| static void mgag200_g200ev_set_hiprilvl(struct mga_device *mdev) |
| { |
| WREG_ECRT(0x06, 0x00); |
| } |
| |
| static void mgag200_enable_display(struct mga_device *mdev) |
| { |
| u8 seq0, seq1, crtcext1; |
| |
| RREG_SEQ(0x00, seq0); |
| seq0 |= MGAREG_SEQ0_SYNCRST | |
| MGAREG_SEQ0_ASYNCRST; |
| WREG_SEQ(0x00, seq0); |
| |
| /* |
| * TODO: replace busy waiting with vblank IRQ; put |
| * msleep(50) before changing SCROFF |
| */ |
| mga_wait_vsync(mdev); |
| mga_wait_busy(mdev); |
| |
| RREG_SEQ(0x01, seq1); |
| seq1 &= ~MGAREG_SEQ1_SCROFF; |
| WREG_SEQ(0x01, seq1); |
| |
| msleep(20); |
| |
| RREG_ECRT(0x01, crtcext1); |
| crtcext1 &= ~MGAREG_CRTCEXT1_VSYNCOFF; |
| crtcext1 &= ~MGAREG_CRTCEXT1_HSYNCOFF; |
| WREG_ECRT(0x01, crtcext1); |
| } |
| |
| static void mgag200_disable_display(struct mga_device *mdev) |
| { |
| u8 seq0, seq1, crtcext1; |
| |
| RREG_SEQ(0x00, seq0); |
| seq0 &= ~MGAREG_SEQ0_SYNCRST; |
| WREG_SEQ(0x00, seq0); |
| |
| /* |
| * TODO: replace busy waiting with vblank IRQ; put |
| * msleep(50) before changing SCROFF |
| */ |
| mga_wait_vsync(mdev); |
| mga_wait_busy(mdev); |
| |
| RREG_SEQ(0x01, seq1); |
| seq1 |= MGAREG_SEQ1_SCROFF; |
| WREG_SEQ(0x01, seq1); |
| |
| msleep(20); |
| |
| RREG_ECRT(0x01, crtcext1); |
| crtcext1 |= MGAREG_CRTCEXT1_VSYNCOFF | |
| MGAREG_CRTCEXT1_HSYNCOFF; |
| WREG_ECRT(0x01, crtcext1); |
| } |
| |
| /* |
| * Connector |
| */ |
| |
| static int mga_vga_get_modes(struct drm_connector *connector) |
| { |
| struct mga_connector *mga_connector = to_mga_connector(connector); |
| struct edid *edid; |
| int ret = 0; |
| |
| edid = drm_get_edid(connector, &mga_connector->i2c->adapter); |
| if (edid) { |
| drm_connector_update_edid_property(connector, edid); |
| ret = drm_add_edid_modes(connector, edid); |
| kfree(edid); |
| } |
| return ret; |
| } |
| |
| static uint32_t mga_vga_calculate_mode_bandwidth(struct drm_display_mode *mode, |
| int bits_per_pixel) |
| { |
| uint32_t total_area, divisor; |
| uint64_t active_area, pixels_per_second, bandwidth; |
| uint64_t bytes_per_pixel = (bits_per_pixel + 7) / 8; |
| |
| divisor = 1024; |
| |
| if (!mode->htotal || !mode->vtotal || !mode->clock) |
| return 0; |
| |
| active_area = mode->hdisplay * mode->vdisplay; |
| total_area = mode->htotal * mode->vtotal; |
| |
| pixels_per_second = active_area * mode->clock * 1000; |
| do_div(pixels_per_second, total_area); |
| |
| bandwidth = pixels_per_second * bytes_per_pixel * 100; |
| do_div(bandwidth, divisor); |
| |
| return (uint32_t)(bandwidth); |
| } |
| |
| #define MODE_BANDWIDTH MODE_BAD |
| |
| static enum drm_mode_status mga_vga_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct drm_device *dev = connector->dev; |
| struct mga_device *mdev = to_mga_device(dev); |
| int bpp = 32; |
| |
| if (IS_G200_SE(mdev)) { |
| u32 unique_rev_id = mdev->model.g200se.unique_rev_id; |
| |
| if (unique_rev_id == 0x01) { |
| if (mode->hdisplay > 1600) |
| return MODE_VIRTUAL_X; |
| if (mode->vdisplay > 1200) |
| return MODE_VIRTUAL_Y; |
| if (mga_vga_calculate_mode_bandwidth(mode, bpp) |
| > (24400 * 1024)) |
| return MODE_BANDWIDTH; |
| } else if (unique_rev_id == 0x02) { |
| if (mode->hdisplay > 1920) |
| return MODE_VIRTUAL_X; |
| if (mode->vdisplay > 1200) |
| return MODE_VIRTUAL_Y; |
| if (mga_vga_calculate_mode_bandwidth(mode, bpp) |
| > (30100 * 1024)) |
| return MODE_BANDWIDTH; |
| } else { |
| if (mga_vga_calculate_mode_bandwidth(mode, bpp) |
| > (55000 * 1024)) |
| return MODE_BANDWIDTH; |
| } |
| } else if (mdev->type == G200_WB) { |
| if (mode->hdisplay > 1280) |
| return MODE_VIRTUAL_X; |
| if (mode->vdisplay > 1024) |
| return MODE_VIRTUAL_Y; |
| if (mga_vga_calculate_mode_bandwidth(mode, bpp) > |
| (31877 * 1024)) |
| return MODE_BANDWIDTH; |
| } else if (mdev->type == G200_EV && |
| (mga_vga_calculate_mode_bandwidth(mode, bpp) |
| > (32700 * 1024))) { |
| return MODE_BANDWIDTH; |
| } else if (mdev->type == G200_EH && |
| (mga_vga_calculate_mode_bandwidth(mode, bpp) |
| > (37500 * 1024))) { |
| return MODE_BANDWIDTH; |
| } else if (mdev->type == G200_ER && |
| (mga_vga_calculate_mode_bandwidth(mode, |
| bpp) > (55000 * 1024))) { |
| return MODE_BANDWIDTH; |
| } |
| |
| if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 || |
| (mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) { |
| return MODE_H_ILLEGAL; |
| } |
| |
| if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 || |
| mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 || |
| mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 || |
| mode->crtc_vsync_end > 4096 || mode->crtc_vtotal > 4096) { |
| return MODE_BAD; |
| } |
| |
| /* Validate the mode input by the user */ |
| if (connector->cmdline_mode.specified) { |
| if (connector->cmdline_mode.bpp_specified) |
| bpp = connector->cmdline_mode.bpp; |
| } |
| |
| if ((mode->hdisplay * mode->vdisplay * (bpp/8)) > mdev->vram_fb_available) { |
| if (connector->cmdline_mode.specified) |
| connector->cmdline_mode.specified = false; |
| return MODE_BAD; |
| } |
| |
| return MODE_OK; |
| } |
| |
| static void mga_connector_destroy(struct drm_connector *connector) |
| { |
| struct mga_connector *mga_connector = to_mga_connector(connector); |
| mgag200_i2c_destroy(mga_connector->i2c); |
| drm_connector_cleanup(connector); |
| } |
| |
| static const struct drm_connector_helper_funcs mga_vga_connector_helper_funcs = { |
| .get_modes = mga_vga_get_modes, |
| .mode_valid = mga_vga_mode_valid, |
| }; |
| |
| static const struct drm_connector_funcs mga_vga_connector_funcs = { |
| .reset = drm_atomic_helper_connector_reset, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = mga_connector_destroy, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int mgag200_vga_connector_init(struct mga_device *mdev) |
| { |
| struct drm_device *dev = &mdev->base; |
| struct mga_connector *mconnector = &mdev->connector; |
| struct drm_connector *connector = &mconnector->base; |
| struct mga_i2c_chan *i2c; |
| int ret; |
| |
| i2c = mgag200_i2c_create(dev); |
| if (!i2c) |
| drm_warn(dev, "failed to add DDC bus\n"); |
| |
| ret = drm_connector_init_with_ddc(dev, connector, |
| &mga_vga_connector_funcs, |
| DRM_MODE_CONNECTOR_VGA, |
| &i2c->adapter); |
| if (ret) |
| goto err_mgag200_i2c_destroy; |
| drm_connector_helper_add(connector, &mga_vga_connector_helper_funcs); |
| |
| mconnector->i2c = i2c; |
| |
| return 0; |
| |
| err_mgag200_i2c_destroy: |
| mgag200_i2c_destroy(i2c); |
| return ret; |
| } |
| |
| /* |
| * Simple Display Pipe |
| */ |
| |
| static enum drm_mode_status |
| mgag200_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe, |
| const struct drm_display_mode *mode) |
| { |
| return MODE_OK; |
| } |
| |
| static void |
| mgag200_handle_damage(struct mga_device *mdev, struct drm_framebuffer *fb, |
| struct drm_rect *clip, const struct dma_buf_map *map) |
| { |
| void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */ |
| |
| drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip); |
| |
| /* Always scanout image at VRAM offset 0 */ |
| mgag200_set_startadd(mdev, (u32)0); |
| mgag200_set_offset(mdev, fb); |
| } |
| |
| static void |
| mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe, |
| struct drm_crtc_state *crtc_state, |
| struct drm_plane_state *plane_state) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct drm_device *dev = crtc->dev; |
| struct mga_device *mdev = to_mga_device(dev); |
| struct mgag200_pll *pixpll = &mdev->pixpll; |
| struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); |
| struct drm_framebuffer *fb = plane_state->fb; |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); |
| struct drm_rect fullscreen = { |
| .x1 = 0, |
| .x2 = fb->width, |
| .y1 = 0, |
| .y2 = fb->height, |
| }; |
| |
| if (mdev->type == G200_WB || mdev->type == G200_EW3) |
| mgag200_g200wb_hold_bmc(mdev); |
| |
| mgag200_set_format_regs(mdev, fb); |
| mgag200_set_mode_regs(mdev, adjusted_mode); |
| |
| pixpll->funcs->update(pixpll, &mgag200_crtc_state->pixpllc); |
| |
| if (mdev->type == G200_ER) |
| mgag200_g200er_reset_tagfifo(mdev); |
| |
| if (IS_G200_SE(mdev)) |
| mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, fb); |
| else if (mdev->type == G200_EV) |
| mgag200_g200ev_set_hiprilvl(mdev); |
| |
| if (mdev->type == G200_WB || mdev->type == G200_EW3) |
| mgag200_g200wb_release_bmc(mdev); |
| |
| mga_crtc_load_lut(crtc); |
| mgag200_enable_display(mdev); |
| |
| mgag200_handle_damage(mdev, fb, &fullscreen, &shadow_plane_state->data[0]); |
| } |
| |
| static void |
| mgag200_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct mga_device *mdev = to_mga_device(crtc->dev); |
| |
| mgag200_disable_display(mdev); |
| } |
| |
| static int |
| mgag200_simple_display_pipe_check(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *plane_state, |
| struct drm_crtc_state *crtc_state) |
| { |
| struct drm_plane *plane = plane_state->plane; |
| struct drm_device *dev = plane->dev; |
| struct mga_device *mdev = to_mga_device(dev); |
| struct mgag200_pll *pixpll = &mdev->pixpll; |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); |
| struct drm_framebuffer *new_fb = plane_state->fb; |
| struct drm_framebuffer *fb = NULL; |
| int ret; |
| |
| if (!new_fb) |
| return 0; |
| |
| if (plane->state) |
| fb = plane->state->fb; |
| |
| if (!fb || (fb->format != new_fb->format)) |
| crtc_state->mode_changed = true; /* update PLL settings */ |
| |
| if (crtc_state->mode_changed) { |
| ret = pixpll->funcs->compute(pixpll, crtc_state->mode.clock, |
| &mgag200_crtc_state->pixpllc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| mgag200_simple_display_pipe_update(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *old_state) |
| { |
| struct drm_plane *plane = &pipe->plane; |
| struct drm_device *dev = plane->dev; |
| struct mga_device *mdev = to_mga_device(dev); |
| struct drm_plane_state *state = plane->state; |
| struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state); |
| struct drm_framebuffer *fb = state->fb; |
| struct drm_rect damage; |
| |
| if (!fb) |
| return; |
| |
| if (drm_atomic_helper_damage_merged(old_state, state, &damage)) |
| mgag200_handle_damage(mdev, fb, &damage, &shadow_plane_state->data[0]); |
| } |
| |
| static struct drm_crtc_state * |
| mgag200_simple_display_pipe_duplicate_crtc_state(struct drm_simple_display_pipe *pipe) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct drm_crtc_state *crtc_state = crtc->state; |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); |
| struct mgag200_crtc_state *new_mgag200_crtc_state; |
| |
| if (!crtc_state) |
| return NULL; |
| |
| new_mgag200_crtc_state = kzalloc(sizeof(*new_mgag200_crtc_state), GFP_KERNEL); |
| if (!new_mgag200_crtc_state) |
| return NULL; |
| __drm_atomic_helper_crtc_duplicate_state(crtc, &new_mgag200_crtc_state->base); |
| |
| memcpy(&new_mgag200_crtc_state->pixpllc, &mgag200_crtc_state->pixpllc, |
| sizeof(new_mgag200_crtc_state->pixpllc)); |
| |
| return &new_mgag200_crtc_state->base; |
| } |
| |
| static void mgag200_simple_display_pipe_destroy_crtc_state(struct drm_simple_display_pipe *pipe, |
| struct drm_crtc_state *crtc_state) |
| { |
| struct mgag200_crtc_state *mgag200_crtc_state = to_mgag200_crtc_state(crtc_state); |
| |
| __drm_atomic_helper_crtc_destroy_state(&mgag200_crtc_state->base); |
| kfree(mgag200_crtc_state); |
| } |
| |
| static void mgag200_simple_display_pipe_reset_crtc(struct drm_simple_display_pipe *pipe) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct mgag200_crtc_state *mgag200_crtc_state; |
| |
| if (crtc->state) { |
| mgag200_simple_display_pipe_destroy_crtc_state(pipe, crtc->state); |
| crtc->state = NULL; /* must be set to NULL here */ |
| } |
| |
| mgag200_crtc_state = kzalloc(sizeof(*mgag200_crtc_state), GFP_KERNEL); |
| if (!mgag200_crtc_state) |
| return; |
| __drm_atomic_helper_crtc_reset(crtc, &mgag200_crtc_state->base); |
| } |
| |
| static const struct drm_simple_display_pipe_funcs |
| mgag200_simple_display_pipe_funcs = { |
| .mode_valid = mgag200_simple_display_pipe_mode_valid, |
| .enable = mgag200_simple_display_pipe_enable, |
| .disable = mgag200_simple_display_pipe_disable, |
| .check = mgag200_simple_display_pipe_check, |
| .update = mgag200_simple_display_pipe_update, |
| .reset_crtc = mgag200_simple_display_pipe_reset_crtc, |
| .duplicate_crtc_state = mgag200_simple_display_pipe_duplicate_crtc_state, |
| .destroy_crtc_state = mgag200_simple_display_pipe_destroy_crtc_state, |
| DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS, |
| }; |
| |
| static const uint32_t mgag200_simple_display_pipe_formats[] = { |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_RGB888, |
| }; |
| |
| static const uint64_t mgag200_simple_display_pipe_fmtmods[] = { |
| DRM_FORMAT_MOD_LINEAR, |
| DRM_FORMAT_MOD_INVALID |
| }; |
| |
| /* |
| * Mode config |
| */ |
| |
| static const struct drm_mode_config_funcs mgag200_mode_config_funcs = { |
| .fb_create = drm_gem_fb_create_with_dirty, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static unsigned int mgag200_preferred_depth(struct mga_device *mdev) |
| { |
| if (IS_G200_SE(mdev) && mdev->vram_fb_available < (2048*1024)) |
| return 16; |
| else |
| return 32; |
| } |
| |
| int mgag200_modeset_init(struct mga_device *mdev) |
| { |
| struct drm_device *dev = &mdev->base; |
| struct drm_connector *connector = &mdev->connector.base; |
| struct drm_simple_display_pipe *pipe = &mdev->display_pipe; |
| size_t format_count = ARRAY_SIZE(mgag200_simple_display_pipe_formats); |
| int ret; |
| |
| mgag200_init_regs(mdev); |
| |
| ret = drmm_mode_config_init(dev); |
| if (ret) { |
| drm_err(dev, "drmm_mode_config_init() failed, error %d\n", |
| ret); |
| return ret; |
| } |
| |
| dev->mode_config.max_width = MGAG200_MAX_FB_WIDTH; |
| dev->mode_config.max_height = MGAG200_MAX_FB_HEIGHT; |
| |
| dev->mode_config.preferred_depth = mgag200_preferred_depth(mdev); |
| |
| dev->mode_config.fb_base = mdev->mc.vram_base; |
| |
| dev->mode_config.funcs = &mgag200_mode_config_funcs; |
| |
| ret = mgag200_vga_connector_init(mdev); |
| if (ret) { |
| drm_err(dev, |
| "mgag200_vga_connector_init() failed, error %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = mgag200_pixpll_init(&mdev->pixpll, mdev); |
| if (ret) |
| return ret; |
| |
| ret = drm_simple_display_pipe_init(dev, pipe, |
| &mgag200_simple_display_pipe_funcs, |
| mgag200_simple_display_pipe_formats, |
| format_count, |
| mgag200_simple_display_pipe_fmtmods, |
| connector); |
| if (ret) { |
| drm_err(dev, |
| "drm_simple_display_pipe_init() failed, error %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* FIXME: legacy gamma tables; convert to CRTC state */ |
| drm_mode_crtc_set_gamma_size(&pipe->crtc, MGAG200_LUT_SIZE); |
| |
| drm_mode_config_reset(dev); |
| |
| return 0; |
| } |